* Added debugger commands to resolve usb_ids to pipes.
* Adjusted the physical memory allocator to be usable in a slimmed down mode
when running inside the kernel debugger.
* Implemented USB keyboard support for KDL through a kernel debugger add-on.
* Added kgetc() and made use of it where previously individual methods were used
to ensure that reading characters always goes through the kernel debugger
add-ons and the other methods.
This has some preconditions to meet though:
1) The keyboard must be in the boot protocol (currently the case but needs to
be revisited once we have a full usb_hid).
2) The keyboard must be attached to a UHCI root port (i.e. not use EHCI or OHCI,
also not through hubs unless those are USB 1.1).
3) the usb_hid driver has to be opened for this to work. This means that for the
time between initializing USB and when usb_hid is opened by the input_server
there is no keyboard support.
Also note that this has no way of detecting hot-plug, meaning that you can't
re-attach your USB keyboard from the hub to the root port once in KDL.
On the bright side of things, since this is a non-destructive mechanism it is
possible to enter and leave KDL without loosing the USB state.
Tested OK in QEMU, not tested on real hardware yet, will see in a few minutes.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@29291 a95241bf-73f2-0310-859d-f6bbb57e9c96
* Introduced flag "invoke_scheduler" in the per CPU structure. It is
evaluated in hardware_interrupt() (x86 only ATM).
* Introduced SMP_MSG_RESCHEDULE_IF_IDLE message, which enters the
scheduler when the CPU currently runs an idle thread.
* Don't do dprintf() "CPU x halted!" when handling a SMP_MSG_CPU_HALT
ICI message. It uses nested spinlocks and could thus potentially
deadlock itself (acquire_spinlock() processes ICI messages, so it
could already hold one of the locks). This is a pretty likely scenario
on machines with more than two CPUs, but is also possible when the
panic()ing thread holds the threads spinlock. Probably fixes#2572.
* Reworked the way the kernel debugger is entered and added a "cpu"
command that allows switching the CPU once in KDL. It is thus possible
to get a stack trace of the thread not on the panic()ing CPU.
* When a thread is added to the run queue, we do now check, if another
CPU is idle and ask it to reschedule, if it is. Before this change, the
CPU was continuing to idle until the quantum of the idle thread
expired. Speeds up the libbe.so build about 8% on my machine (haven't
tested the full Haiku image build yet).
* When spinlock debugging is enabled (DEBUG_SPINLOCKS) we also record
the spinlock acquirer on non-smp machines. Added "spinlock" debugger
command to get the info.
* Added debugger commands "ici" and "ici_message", printing info on
pending ICI message respectively on a given one.
* Process not only a single ICI message in acquire_spinlock() and other
places, but all pending ones.
* Also process ICI messages when waiting for a free one -- avoids a
potential deadlock.
* Mask out non-existing CPUs in send_multicast_ici(). panic() instead of
just returning when there's no target CPU left.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@28223 a95241bf-73f2-0310-859d-f6bbb57e9c96
* Add possibility to restart a complete pipe through B_KDEBUG_RESTART_PIPE.
* Implement tail in the kernel debugger making use of the former.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@28154 a95241bf-73f2-0310-859d-f6bbb57e9c96
debugger add-on set a demangle hook, all modules under debugger/demangle/ are
now considered demangle modules.
* Added another function to the demangle module interface that gives you access
to the arguments.
* Implemented a demangling module for GCC2.
* The older demangling module is now called "gcc3+", but doesn't support
getting the arguments yet.
* The "call" KDL command is now using demangling to automatically show you
the arguments of a call from a stack crawl.
* Minor cleanup.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@28018 a95241bf-73f2-0310-859d-f6bbb57e9c96
Currently it only contains KDEBUG and the block cache debugging macros.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@27816 a95241bf-73f2-0310-859d-f6bbb57e9c96
debugger and added respective getter/setter methods
debug_{get,set}_debugged_thread(). By default the currently debugged
thread is the thread that dropped into the kernel debugger, but commands
like "in_context" can change it.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@27164 a95241bf-73f2-0310-859d-f6bbb57e9c96
first command line argument of a given command line string.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@27155 a95241bf-73f2-0310-859d-f6bbb57e9c96
(fault address, pc, read/write) when a page fault occurs, and print them
in case this caused the termination of a debugger command.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@26949 a95241bf-73f2-0310-859d-f6bbb57e9c96
It does its job by using part of libsupc++, with fake malloc and friends to make sure it won't double fault.
Works here, but cp-demangle must be extracted by hand from the lib, can't get the rule to work as I want, Ingo ?
Maybe using it directly without malloc hack would be ok with 16KB buffer, but I'm not sure of that.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@26581 a95241bf-73f2-0310-859d-f6bbb57e9c96
pipes in the shell, though the semantics is a little different: The
second command is invoked whenever the first command has written a
complete line. The line is passed as last argument to the second
command. The new command flag B_KDEBUG_PIPE_FINAL_RERUN causes the
second command to be invoked again (with NULL argument) after the
first command is done.
* Added kprintf_unfiltered() and kputs_unfiltered() which bypass the
pipe mechanism and directly print to the bluescreen/serial output.
* Moved most commands from debug.cpp to the new
debug_builtin_commands.cpp.
* B_KDEBUG_DONT_PARSE_ARGUMENTS commands don't get an argument anymore,
if it would consist of white space only.
* Added new debugger command return value B_KDEBUG_ERROR, which
indicates that executing the command failed. This return code will
abort a complete pipe.
* Since debugger commands can nest (i.e. one command can invoke another
one) the setjmp()/longjmp() mechanism to restore the stack after a
page fault in a command needs more than one jump buffer.
* Added abort_debugger_command(), which longjmp()s out of the currently
executed command. This will also abort the current pipe.
* When pagination is enabled pressing "a" will abort the running command
(as opposed to "q" which only disables the blue screen output, but
lets the command continue).
* Added debugger commands:
- "grep" which can be used to filter output by pattern. Removed the
"filter" command and the underlying mechanism that did that before.
- "head" which prints only the first lines of output of another
command.
- "wc" counts lines, words, and characters of another command's
output.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@25744 a95241bf-73f2-0310-859d-f6bbb57e9c96
* The boot splash code now checks wether debug screen output is enabled or not
using the above function.
* The boot splash code no longer maps it's own copy of the frame buffer, instead,
it will use the boot item feature as the VESA driver does. Also removed the
lock, as that's not needed at all.
* Renamed splash.cpp to boot_splash.cpp, and boot/splash.h to boot_splash.h
(it's not part of the boot loader, but the kernel).
* Removed dead code from boot_splash.cpp, added license. Replaced license
header in boot_splash.h to a style guide conforming one.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@24489 a95241bf-73f2-0310-859d-f6bbb57e9c96
* The kernel now opens up to 8 debugger modules (and puts them into an array;
maybe we'll want to switch to a doubly linked list when there is the need).
* Implemented an example debugger module that prints a stack trace of the
current thread when the kernel debugger is entered (not included in the
image).
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@23794 a95241bf-73f2-0310-859d-f6bbb57e9c96
For commands with this flag set, the parser won't parse the
arguments provided (it will only check for matching parentheses and
brackets), but will pass the unparsed argument list string to the
command instead.
* Set the new flag for the "expr" command, so one doesn't have to quote
the expression to evaluate anymore (or put it in parentheses).
* Fixed tokenizing of quoted and unquoted strings in expression mode.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@23697 a95241bf-73f2-0310-859d-f6bbb57e9c96
command usage texts, which can be too long for kprintf().
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@23677 a95241bf-73f2-0310-859d-f6bbb57e9c96
add_debugger_command(), but additionally takes parameters "usage"
and "flags".
* Added add_debugger_command_alias() which creates another name for an
existing command.
* Added print_debugger_command_usage() to print a command's usage.
* invoke_debugger_command() intercepts invocations with "--help" and
prints the command's usage text, if it is known. If unknown, the
command will be called normally.
* Made use of the new functions in debug.cpp.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@23573 a95241bf-73f2-0310-859d-f6bbb57e9c96
a command is executed anymore. Instead the least recently used
temporary variable is overwritten, if there's no free slot for a new
temporary variable.
* Removed the special handling for the command result variable ("_"). It
just works like any other temporary variable, now.
* Individual temporary variables can be removed (e.g. using the "unset"
command).
* Added unset_all_debug_variables() and "unset_all" command to unset
all persistent and temporary variables.
* Removed remove_all_temporary_debug_variables and renamed
remove_debug_variable() to unset_debug_variable().
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@23568 a95241bf-73f2-0310-859d-f6bbb57e9c96
that is a little more powerful than BeOS'. It features:
- Persistent and temporary uint64 variables. The former kind is set
only by the user. The latter (those prefixed "_") can be set
automatically by commands, thus e.g. making it easier to access
members of a dumped structure. They are unset when the next command
is invoked. The special temporary variable "_" is defined as a
command's return value.
- Expressions can contain nested command invocations using brackets
("[ ... ]").
- Command lines are parsed by the expression parser, too. They can
contain command invocations (in brackets) and expressions (in
parentheses).
* Added debugger commands:
- expr: Evaluates the given expression and prints the result.
- unset: Undefines a variable.
- vars: Prints the values of all defined variables.
* Moved debugger command code into its own source file.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@23546 a95241bf-73f2-0310-859d-f6bbb57e9c96
dprintf() with the exception that it doesn't write anything to the
syslog. The reason is that syslog_write() releases a semaphore and can
therefore not be invoked when the thread spinlock is held.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@22428 a95241bf-73f2-0310-859d-f6bbb57e9c96
additional parameters that are fed into a dprintf() before panic() is
invoked.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@21838 a95241bf-73f2-0310-859d-f6bbb57e9c96
Disabled by default, but all kernel devs are *highly* recommended to turn them on for your builds and see if it trips anything, and then fix it.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@21477 a95241bf-73f2-0310-859d-f6bbb57e9c96
even if "kernel_startup" was "true". Page faults are now no longer allowed
during kernel startup (and could be easily avoided). The only situation where
we accept page faults with interrupts turned off now is during a kernel debugger
session.
Added a command debug_debugger_running() to test for that situation.
kernel_debugger() no longer sets kernel_startup while it's running; there should
be no situation when this could be helpful.
Interrupts are no longer enabled when a page fault happens in the kernel
debugger.
This potentially fixes all sorts of problems, and not only in the kernel debugger,
it could also have affected SMP (will test later).
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@14045 a95241bf-73f2-0310-859d-f6bbb57e9c96
(dprintf() locks using acquire_spinlock() which can itself drop into the
kernel debugger, causing an endless loop (until the stack was full).
Removed debug_putchar().
The gdb interface is now calling arch_debug_serial_*() directly.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@13882 a95241bf-73f2-0310-859d-f6bbb57e9c96
called by debug_init_post_vm().
Since the availability of a blue screen specific getchar() is static anyway, there
is no need for the sBlueScreenGetChar variable (only the message "only serial input
available" gets lost, but since that is platform specific anyway...).
Hello blue screen! We now have an on-screen KDL, to be enabled by the kernel
setting "bluescreen", just like on BeOS.
The blue screen does not yet support any cursor actions or backspace, though (need
to grab some stuff from our console driver).
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@12896 a95241bf-73f2-0310-859d-f6bbb57e9c96
kernel_debugger() didn't do enough before; panic() did all the work - but
since the former is a public function as well, I moved all the functionality
to it. Also fixed a possible buffer overrun in panic().
Renamed dbg_* to debug_*.
"serial_debug_port" setting did not ignore negative values.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@12889 a95241bf-73f2-0310-859d-f6bbb57e9c96
and why they are called.
Introduced a cpu_init_post_vm() that will now call arch_init_post_vm() instead
of letting main() doing it.
Fixed some return types (mostly from int to status_t).
git-svn-id: file:///srv/svn/repos/haiku/trunk/current@9438 a95241bf-73f2-0310-859d-f6bbb57e9c96
dbg_register_file[][] reserves now space for SMP_MAX_CPUS CPUs.
Removed old dbg_{set|get}_serial_debug() functions.
git-svn-id: file:///srv/svn/repos/haiku/trunk/current@5308 a95241bf-73f2-0310-859d-f6bbb57e9c96
some broken C++ export definitions, added missing licenses etc.
git-svn-id: file:///srv/svn/repos/haiku/trunk/current@3152 a95241bf-73f2-0310-859d-f6bbb57e9c96
remove_debugger_command() added.
Fix cmd_gdb() prototype according to new debugger command one.
git-svn-id: file:///srv/svn/repos/haiku/trunk/current@290 a95241bf-73f2-0310-859d-f6bbb57e9c96
