SMAP will generated page faults when the kernel tries to access user pages unless overriden.
If SMAP is enabled, the override instructions are written where needed in memory with
binary "altcodepatches".
Support is enabled by default, might be disabled per safemode setting.
Change-Id: Ife26cd765056aeaf65b2ffa3cadd0dcf4e273a96
The scheduler uses the load tracking logic to compute the load of
threads to be enqueued into the run queue. The time delta between the
last enqueue and the next enqueue may grow very large for threads
that mostly wait on conditions. In such cases the int "n" period count
variable would become too small and wrap around, leading to an
assertion failure.
For this to happen, the thread in question would have to have slept for
at least ~25 days and then wake up. Threads often affected would be ones
waiting for some other process to end, for example shell threads waiting
for a long running process to exit.
Fixes#13558.
Following recent changes to use libroot_build on Haiku also, it is now
actually impossible to build Haiku components on non-Haiku platforms
(BeOS R5, Dan0, BONE, Zeta), so we can remove any logic related to this.
This is only the first part; still to be removed are:
* SetSubDirSupportedPlatformsBeOSCompatible
* HOST_PLATFORM_BEOS_COMPATIBLE
* TARGET_PLATFORM_BEOS_COMPATIBLE
It was needed on macOS for a time when BUrl used regexes for parsing.
Now it does not, and so we can remove libshared's RegExp from build
libshared, and thus also libgnuregex.
The feature gives user ability to choose the position of notifications
out of Follow Deskbar, Lower Right, Lower Left, Upper Right and Upper
Left. Fixes#9749 - Notification_Server: add the ability to choose the
position of notifications (easy).
Signed-off-by: Adrien Destugues <pulkomandy@pulkomandy.tk>
The base VMCache class changed to the generic_ types with their
introduction in in *2011* (435c43f591),
but these classes were never properly adapted. These functions should not
be called here (they panic() -- but the base class only returns B_ERROR,
so that is a difference at least.)
Found by Clang's -Woverloaded-virtual.
* Expects its config files in /boot/home/test_launch.
* Uses standard I/O, and is always in user mode.
* Also added test_launch_roster command that is able to talk to the test
server like it does to the real thing.
Fixes#13733.
Unlike written in the ticket, the string length is 136 (not 135),
and the code checks for rejects anything greater or equal to the max
value. So set the constant to 137.
At present, does not work (it fails to properly set up interrupts,
resulting in thousands of unhandled ones which all but grinds the system
to a halt) but this at least is some progress.
Accelerant interface:
Introduce new hooks B_SET_BRIGHTNESS and B_GET_BRIGHTNESS. Brightness is
a float in the 0..1 range.
App_server:
Forward brightness things between BScreen and the accelerant.
intel_extreme:
Implement the hooks. Note that this only works for laptop panels, but
the driver will pretend to support it in other cases as well.
Screen preferences:
If the accelerant supports the B_GET_BRIGHTNESS hook, allow to set
brightness with a slider. Otherwise, the slidere is hidden and these
changes aren't visible.
The UDP service does not own the UDP sockets. When shutting down,
inform the bound sockets that the service is no longer available.
This allows subsequent method calls to error out cleanly.
Signed-off-by: Augustin Cavalier <waddlesplash@gmail.com>
Add a cleanup function net_stack_cleanup() that calls a new NetStack::ShutDown() method.
Make sure this method works even if the network stack was never initialized.
Signed-off-by: Augustin Cavalier <waddlesplash@gmail.com>
Was nothing but a slightly-stripped version of the nvidia driver,
not touched substantially in nearly 10 years, and the cards it was
originally going to support (but never got anywhere near so) have long since
been deprecated.
All of its prior functionality has been moved into HaikuControlLook.
This paves the way for customizeable control looks, which I intend to implement
in the future as part of decorators.
This is being pushed now because libbe ABI was already broken due to the
Notifications changes, so this is riding that so we only have to do a mass
rebuild once.
* Caching these values could result in missed
state changes.
* We may want to re-implement later.
* Highlights that all DP AUX communication is broken
during my testing.
Notifications preflet:
-Use sliders instead of text fields for width and timeout
-Remove icon size choice (mini icon looks horrible)
-Consolidate both "Enable" checkboxes into one
-Fix Revert button, remove Apply button, add Defaults button
-All changes to settings saved immediately
-Live example notification message shown when settings changes are made
-Add setting for individual apps to specify whether their notifications
should be muted
-Remove history list (to be implemented later)
BNotification class:
-BNotification records the signature and name of application that
created it
-New functions to get source application signature and name
Notification Server:
-Notification pop up view layout fixes and bold font size fix
-Remove notifications history from AppUsage class (will be saved in
cache instead)
-Remove vector of NotificationView objects which isn't needed
-Get source application info from notification object, not the received
message which is not reliable
* Use BDateFormat::GetDayName() to fetch weekday names.
* Use appropriate symbol width(Mon, Mo, M) depending on the frame width.
* Provide functionality to update day name header in case of locale
preferences change.
Signed-off-by: Adrien Destugues <pulkomandy@pulkomandy.tk>
* stop the extractor processing before deleting the source.
* crash happened in MediaPlayer FilePlaylistItem::_CalculateDuration().
* was a regression introduced in hrev50671.
* fixes#13156.
* Issue: In BCalendarView presently, there is no notion of a current date
and the current date is not highlighted. So in the deskbar tray calendar
which uses BCalendarView, we cannot know the current date once we change
the selected day.
* Fix: Make BCalendarView accept pulse messages, check for system date
with every pulse message and update the current date accordingly.
Highlight the current date by rendering its day number text in a
different color.
Signed-off-by: Adrien Destugues <pulkomandy@pulkomandy.tk>
ticket : #13592
* Eventually BoardSetups and target boards will go away.
* Include all known fdt's in the mmc image
* This gets us closer to target board-less arm
* Changing hardware is as simple as plugging a new fdt
into u-boot's startup script.
* Drop my original rpi1 work. We're targetting ARMv7
minimum.
Thus, BeOS compatibility is preserved (and there is no risk of
breaking GCC5<->GCC2 interoperation on hybrid builds.)
This commit only makes the actual change, the build fixes are
in the next commit.
This allows the loader to skip BFS partitions that don't contain
a bootable system. Useful when you have a BFS data partition that
comes before the system partition when iterated over.
Currently, only the UEFI loader actually returns more than one
possible partition.
BFont::Blocks is now implemented in ServerFont, via a call through the
app_server. It uses fontconfig to iterate through a charset of a font
and stores the defined blocks in a bitmap.
A new API was added, BFont::IncludesBlock, that will allow for arbitrary
testing of a given Unicode block. Since nothing is cached, searching
through an entire charset for a series of Unicode blocks can be quite
slow. In a given block there may be only 1 or 2 characters actually
defined so every character within a block needs to be checked until one
is found, which in a degenerate case will mean the entire block is
checked.
Signed-off-by: Axel Dörfler <axeld@pinc-software.de>
* This allows KPath to not allocate a buffer when initialized
without path.
* Added test cases for this.
* Added test for LockBuffer().
* Enhanced tests to allow building them in debug mode.
* Moved calling vfs_normalize_path() into own private method.
* Improved error codes; B_NO_MEMORY is now only returned if the
allocation actually failed.
* If used with LAZY_ALLOC, Path() and LockBuffer() are now allowed
to return a NULL path.
When both Backgrounds and Screen are open, if the workspace color is changed
in Backgrounds the monitor preview in Screen will now refresh to the new color.
Also added a BAlert in BackgroundsView.cpp when failing to change the
background image.
Signed-off-by: Adrien Destugues <pulkomandy@pulkomandy.tk>
Fixes#13286.
* It's very important to use a negative value to identify
non valid or uninitialized connections. Additionally, it's preferred
to don't interfere with media_kit types as long as the framework use
it in the backend.
* Add special handling for reading the BEOS:TYPE attribute to supply
on-the-fly fake MIME types for FUSE module filesystems, the same
way it's done in our FAT and NTFS FS modules
* Reuse the mime_ext_table which we already have and put it into a
shared location so we don't get further extra copies of it
* Add a way for a FUSE module to supply Haiku-specific extensions.
This allows it to integrate better with Haiku while only requiring
minimal changes on the FUSE module itself.
* For now, there is only one extension: another function pointer for
"get_fs_info", which lets the FUSE module fill in an fs_info struct.
FUSE provides no good way to otherwise communicate extra information,
such as the volume flags (e.g. B_FS_IS_SHARED).
* A FUSE module can signal that it supports the Haiku extensions by
a) defining HAS_HAIKU_FUSE_EXTENSIONS before including the fuse
headers
b) setting the global variable gHasHaikuFuseExtensions to 1 in
its initialization
Otherwise, the Haiku extensions are completely invisible to the
FUSE module.
Update all in-tree consumers of the BJson API to match. Also added
const-qualifiers to the BString versions of the API, and added the leading
"_" to the header guards.
... reverse this to avoid confusion, you'll see why in next commit.
No functional change intended in this commit, functional change is in the
next commit.
This is an implementation of pthread barriers pursuant to the relevant specification.
Barriers are essentially a special case of conditional variables,
such that all threads waiting on one are woken up when the number of
waiters reaches a number provided at the initialization of the barrier.
In view of that, this implementation mimics the implementation of pthread_cond,
except it is more specialized and self-contained.
Signed-off-by: Jérôme Duval <jerome.duval@gmail.com>
* Fixes problems with setting the partition name after uninitializing
a partition in DriveSetup. Previously, UninitializeJob() was
followed by SetStringJob(), but the kernel was updating the
change counter for the parent partition when uninitializing a
partition, leading to SetStringJob() having an incorrect change
counter for the parent partition. Now the parent change counter
will be correct when SetStringJob() runs.
* Also defer signals while registering fork hooks.
* While malloc provides fork heap hooks which lock the heaps and unlock/reinit,
malloc_debug provides empty hooks.
* Ideas suggested by Ingo, patch reviewed by him. Thanks a lot!
* Also call fork parent hooks on failure.
* Solve locks-up when combining multithreading and process forking, should help
with #13111.
* There's no need to supply ways to mismatch the buffer duration
and size. Anything should reflect the media_format, this is at least
fixed on API level.
* There's no point actually in providing BTimeSource dependant
functionality. If and when there will be need for something like
that, possibly never, an higher level solution will be integrated.
Team:
- Adjust report generation event to include a final status code for listeners.
CliContext,TeamWindow,ReportUserinterface:
- Use aforementioned status code to indicate whether report generation
succeeded or failed.
DebugReportGenerator:
- Notify listeners if report generation fails. This may have previously
been responsible for some bug reports where it was indicated that the
debugger hung without exiting after being asked to save a report from
a crashed app.
- When dumping disassembly, retrieve it directly if necessary rather than
requesting it via the user interface listener. This also fixes the quirk
that requesting to save a crash report while looking at the source code
of a function would trigger switching it to disassembly visually.
- When walking the list of threads to dump, acquire references to all of
them before starting. Otherwise, it was potentially possible for a running
but not crashed thread to exit while we were generating the report, leaving
us with a pointer to a deleted thread. This was most likely the cause of one
of the crashes reported in #13082.
- When receiving the notification that source code state has changed, clear
the waiting function. Otherwise, it was potentially possible for us to get
other state change notifications, leading to the data semaphore being
released too often. This would then cause later potential waits such as
the stack frame memory dump to not actually wait when they should,
potentially leading them to dereference objects that weren't yet ready.
This fixes another of the crashes in #13802.
- Split MessageCodes.h into a second file that separates out the
application-specific message codes from those used by the core.
Adjust includes accordingly. No functional change.
* The idea is to move the callback based mechanism into a derived
class. The objects can be composed to create working systems.
* The BMediaClient class supply RegisterInput/RegisterOutput
and BeginInput/BeginOutput is moved to BSimpleMediaClient.
* Various minor fixes.
* Capabilities() become Kind()
* Use media_client and media_connection to better model
the different situations of the API. Reduce code duplication
and move media_kit structs/methods into private.
* Various API and beauty improvements.
* Introduce id management for media_connections.
* Fix different issues preventing to correctly begin a connection.
* Those structs are provided as replacement for the classic
media_kit ones. They provide better encapsulation of the data
and the resulting code is heavily simplified. It's planned to
introduce BMediaRoster functions to provide conversion from
media_node and media_input/media_output to media_client
and media_connection.
FunctionInstance:
- Add new state FUNCTION_SOURCE_SUPPRESSED. This signals that the user
explicitly forced disassembly to be loaded despite source code being
available.
LoadSourceCodeJob:
- When forced to disassembly, use the above suppressed state accordingly.
SourceView/TeamWindow/TeamDebugger:
- Adjust to take new state into account as needed.
TeamDebugInfo::GetActiveSourceCode:
- When looking at a function to decide whether to return line information
based on source or disassembly, first examine the source code state. If
the source has never been loaded for that function, but we have it available,
set it on the function at that point. This lazily addresses the fact that
LoadSourceCodeJob is called on behalf of a specific function, and
consequently only sets the source code onto that function, and not all others
present in the same file. This allows us to differentiate between the case
where a function doesn't have source code available at all, versus a function
that has simply been forced to disassembly view at this point in time.
The primary symptom of the above issue was that attempting to set a breakpoint
outside of the currently active function, but within the same file would result
in the breakpoints view indicating that the breakpoint was at line 0 rather
than the appropriate line, and breakpoints would also not be drawn in the
source view for such locations.
Thanks to Humdinger for the heads up!
Chunks may be physically contiguous, but virtually disjoint. Adding
physical addresses may cause ranges to be merged incorrectly.
Signed-off-by: Jessica Hamilton <jessica.l.hamilton@gmail.com>
* The BMediaClient is an higher level API to the media_kit. It
corresponds to what the layout API was for the interface_kit.
The main idea is to allow the developer concentrate only on
higher level details and avoiding handle with the tricky parts
of the media_kit. At the same time the general purpose node that
is implemented inside would allow implementing the best techniques
around thus at the same time reducing code duplication and increasing
efficiency.
* BMediaClient is WIP, this is the initial merge of the branch.
The initial development stone was set long time ago and walked
through various design/implementation phases.
* Ideally we should support this feature by default to allow
future improvements to the plugins management.
* Fixes the major memory corruption that lead to various
crashes on exit in MediaPlayer.
* beaglebone vs beagleboard
* While the boards are almost the same, they have
diff. FDT's now (more memory, different layout etc)
* Make u-boot script more rpi-like
(depend on u-boot for initial addresses)
* Wasn't working, still doesn't.
* Now pulling in latest amdgpu atombios.h headers
* Lots of DisplayPort cleanup and removal of legacy stuff
* Add obsolete atombios header for things that disappear
(amdgpu doesn't support older cards like we do)
* Introduce new code to support later encoder tables
* Drop radeon-specific encoder service from common dp_info
* Tested on HD 5450 hdmi
* Helps prevent mainboard explosions and other bad stuff.
* ...maybe not explosions, but bad things.
* The RX 480 reference design can pull as much as 90W
from its PCIe slot at load. PCIe is rated for 75W.
* This change overloads the PCIe power cables vs the PCIe
slot. The PCIe power cables can handle going over spec.
* Untested since we really can't come close to loading a
RX 480 without hardware OpenGL ^_^
* Should be able to test on real hardware within a week.
- Add new interface TeamFunctionSourceInformation. Currently this
exposes a single function allowing one to query for the currently
active source code given a FunctionDebugInfo instance.
- Implement TeamFunctionSourceInformation on TeamDebugInfo.
- Pass TeamFunctionSourceInformation to Dwarf{Team,Image}DebugInfo.
In turn, make use of it in DwarfImageDebugInfo::GetStatement() in
order to determine whether to return the corresponding assembly
or source statement.
With this piece of information, the debugger is now correctly able to
determine that the user is currently looking at disassembly despite debug
info being available, and consequently adjust its stepping behavior based on
that. Previously, the source code statement was always used, leading to it
not being possible to single step assembly lines in such a circumstance
without manually using run to cursor.
Other related cleanups:
- TeamDebugInfo now inherits BReferenceable directly, rather than relying on
indirectly inheriting it from TeamTypeInformation.
- Remove BReferenceable from TeamTypeInformation. The latter is only an
interface anyways, and inheriting that base class from multiple locations
was causing GCC5 trouble when resolving BReference<TeamDebugInfo>, even
when virtual inheritance was used.
The HashMap constructor was called before the heap is initialized,
ending up calling malloc from the OpenHashMap constructor.
Oddly it was still working on x86 but broke other platforms.
Instead we add a Lookup() static method to Partition,
which by default walks gPartitions for the id,
and recursively calls itself on the children lists.
This means we must add a partition even temporarily to gPartitions
before Scan()ing it though.
Signed-off-by: François Revol <revol@free.fr>
* Only set HAIKU_BOOT_PLATFORM to bios_ia32 if not defined
* Add gnuefi build feature
* Introduce BOOT_LDFLAGS, and move options for passing to linker
into ArchitectureSetup
* x86_64 compile fixes for warnings in boot loader
* loader/elf.cpp: don't include ELF32 support when targeting EFI
* relocation_func.cpp: copy of the relocation code from gnuefi
to make _relocate extern "C", and avoid including <efilib.h>
* boot_loader_efi.ld: copy of gnuefi's elf_x86_64_efi.lds,
modified to include support for C++ constructors, etc. Keep in
sync with the gnuefi package
Signed-off-by: Jessica Hamilton <jessica.l.hamilton@gmail.com>
There was some mixup with the interrupt registers, still:
- The driver uses 16-bit read/write, but on SandyBridge the register is
32 bits
- There is a global interrupt enable bit, which must be set to unmask
everything else
- The bits for vblank interrupt are not the same on SNB and later PCH
based devices, and the code mixed the two.
Move the computation of the interrupt bits to an helper function, and
use it everywhere to make sure we always use the right bits.
Modesetting
===========
My previous hack was setting the transcoder registers, instead of the
display ones. Do that the way it is designed in the driver instead:
- If there is a transcoder, set its registers, but do not set the
display timings. The display will remain set at its native (and only)
resolution, and panel fitting will adjust the output of the transcoder
to match.
- If there is no transcoder, set the display registers directly to the
native resolution, as it was done on previous generation devices.
- fPipeOffset hacks no longer needed
DPMS
====
It seems the panel control register is not readable on PCH? Anyway, the
code would loop forever waiting for the bit to become unset when turning
the display off. Waiting seems to not be needed, so just remove it as
well as the "unlock" bit, which does not work for me and results in a
black screen.
Remaining hacks
===============
I still need to force HEAD_MODE_A_ANALOG to get output on pipe B (LVDS
display) working. I suspect something is common to the two pipes or not
allocated to the right one.
This version will have less side effects on other generations and help
with getting things to work on SandyBridge and possibly later devices.
Please test and report.
Add an Icon() and SetIcon() method. Override SetMarked() to set the
parent menu field icon.
Don't move the label right if icon is NULL. Make the first menu item
an IconMenuItem with a NULL icon. This allows the icon to draw in the
closed menu state.
icon gets updated even if you select an item in a submenu
http://insightfactory.tumblr.com/image/142366356207
* Make the color box a rectangle with proportions of golden ratio.
* Override GetContentSize() to make menu item area larger.
* Label should never truncate since I make sure there is enough room.
* Draw the label using BMenuItem parent class
* Carefully adjust the spacing so that there is an attractive amount of
padding between the checkmark and color box and the color box and label.
Add _AddMenu method to BMenuField that adds BColorMenuItem as its
base menu item. This shows the BColorMenuItem in the closed state.
Create BPrivate::MenuItemPrivate
Add a SetSubmenu() method to MenuItemPrivate that gives you
the ability to add a submenu after creating the object. This
method should be public
Skip disabled items
Color gets updated even if you select an item in a submenu
Architecture:
- Store and provide accessor for the size in bytes of the low-level
debug_cpu_state size of the respective target CPU. Adjust subclasses
to pass in the appropriate size information.
