only scsi_disk checks the actual value, other drivers take the logical block size.
This change reports the physical block size from the disk rather than the block
size used by IDE/SATA/SCSI commands. On typical modern SATA disks, the SATA
commands will use 512 byte blocks, but the disk will actually read and write
4K blocks internally. This is only of importance for partition alignment for DriveSetup,
and is independant of file systems or partitioning systems. This could also influence
the recommended block size for some file systems.
Change-Id: Id0f2e22659e89fcef64c1f8d04f81cd68995e01f
Reviewed-on: https://review.haiku-os.org/c/haiku/+/5667
Tested-by: Commit checker robot <no-reply+buildbot@haiku-os.org>
Reviewed-by: Adrien Destugues <pulkomandy@pulkomandy.tk>
Fixes:
* Use uint64 instead of off_t when handling offset and size
of the trimmed range in the fs_trim_data structure
* BlockAllocator::Trim: Correct the size of a buffer
* ram_disk, mmc: Do not trim past device capacity
Improvements:
* BlockAllocator::Trim: Because the received offset and size
are ignored by BFS (the functionality is not implemented yet),
return B_UNSUPPORTED if the range does not cover the whole
partition
* ram_disk, mmc: More accurate calculation of the number
of trimmed bytes
* devfs: Add a uint64 version of translate_partition_access()
Change-Id: I24f4c08674f123ad33a5fef6e28996a4ada6ff0d
Reviewed-on: https://review.haiku-os.org/c/haiku/+/4155
Tested-by: Commit checker robot <no-reply+buildbot@haiku-os.org>
Reviewed-by: Adrien Destugues <pulkomandy@gmail.com>
Fixes bfs part of #10336. Untested on SATA (don't have a testing drive
to sacrifice) but working fine on SD/MMC.
This requires moving the copy from kernel to userland into the devfs. As
a result the code in the disk drivers becomes a bit simpler.
Also add some documentation for the common ioctls to implement for a
disk device.
Change-Id: Ie84b6a1d293828d33902a64b3c9d4b19aa6eacb1
Reviewed-on: https://review.haiku-os.org/c/haiku/+/3640
Reviewed-by: Jérôme Duval <jerome.duval@gmail.com>
* The UNMAP command is theoretically much faster, as it can get many block
ranges instead of just a single range.
* Furthermore, the ATA TRIM command resembles it much better.
* Therefore, fs_trim_data now gets an array of ranges, and we use SCSI UNMAP
to trim.
* Updated BFS code to collect array ranges to fully support the new
fs_trim_data possibilities.
drivers in the future, such that NetworkStatus and similar software can show
nice names for the devices. The device manager should implement this and
return the B_DEVICE_PRETTY_NAME of the device (and in turn, new style drivers
should actually set this).
* Implemented handling of this ioctl in the scsi_periph to return the vendor/
product strings.
* Implemented this in the ATA bus manager to return the model from the info
block.
* KDiskDevice now fills in the partition_data::name if the B_GET_DEVICE_NAME
succeeds.
* As a side effect, at least BootManager now shows the drive name; maybe
DriveSetup does as well for the raw device.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@40231 a95241bf-73f2-0310-859d-f6bbb57e9c96
- B_GET_ICON_NAME: returns the name of an icon. This will then be read from
a predefined location on disk (not yet implemented). This would also allow
to add specifiers like "-boot", or "-fat|bfs|ntfs|...", and have special
icons for those.
- B_GET_VECTOR_ICON: retrieves the vector icon of a device, if any.
* get_device_icon(BBitmap*, ...) now supports other color spaces than B_CMAP8.
* Added get_device_icon(), BPartition::GetIcon(), and BVolume::GetIcon()
variants that can also retrieve the icon data directly (like
BNodeInfo::GetIcon()).
* Reenabled the previous BPartition::GetIcon(), based on a patch by
Justin O'Dell - this fixes#1391.
* Tracker's MountMenu class now uses B_RGBA32 icons, instead of B_CMAP8.
* Added vector icon to scsi_disk, and scsi_cd. The former doesn't have any
special removable icon, though.
* Header cleanup, added/updated license, whitespace cleanup.
* Marked deprecated/obsolete driver ioctls in Drivers.h.
* Removed OpenBeOS namespace in the headers I touched that still had them.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@27001 a95241bf-73f2-0310-859d-f6bbb57e9c96
this should simplify big times implementing ttyname() for ex, and could be handy anyway.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@17655 a95241bf-73f2-0310-859d-f6bbb57e9c96
from both, Drivers.h, and fs_interface.h.
The latter no longer includes vfs_types.h for iovecs, but <sys/uio.h> for iovec.
git-svn-id: file:///srv/svn/repos/haiku/trunk/current@9140 a95241bf-73f2-0310-859d-f6bbb57e9c96
make clear that they work differently from before (or soon will).
git-svn-id: file:///srv/svn/repos/haiku/trunk/current@8841 a95241bf-73f2-0310-859d-f6bbb57e9c96
the number of bytes read/written in an argument. Until now, we had a buggy
mix between those two solutions. Courtesy of Jack Burton.
git-svn-id: file:///srv/svn/repos/haiku/trunk/current@7100 a95241bf-73f2-0310-859d-f6bbb57e9c96
Replaced <types.h> with <sys/types.h> because that's what those headers
were looking for.
git-svn-id: file:///srv/svn/repos/haiku/trunk/current@1118 a95241bf-73f2-0310-859d-f6bbb57e9c96
