of the host platform. The libtracker Jamfile seems to be the only one that
needs another exception.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@21827 a95241bf-73f2-0310-859d-f6bbb57e9c96
added $(HAIKU_GCC_LIBGCC) to HAIKU_KERNEL_ADDON_END_GLUE_CODE as suggested by Ingo
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@21795 a95241bf-73f2-0310-859d-f6bbb57e9c96
computed as '.' which resulted in output path ending with '/.', causing mkdir to choke.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@21778 a95241bf-73f2-0310-859d-f6bbb57e9c96
AddDirectoryToHaikuImage with attributes does also work for directory
names with spaces now.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@21761 a95241bf-73f2-0310-859d-f6bbb57e9c96
(or rdef) files which will be converted to attributes and added to the
installed directory. Adjusted build_haiku_image script accordingly.
* Added directory data/image_directories, which is where the resource
files for the directories attributes shall be stored. As naming
convention I suggest using the target directory path with slashes
replaced by hyphens, e.g. home-config-bin.rdef for home/config/bin.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@21711 a95241bf-73f2-0310-859d-f6bbb57e9c96
* Added ResAttr rule, which converts resource (or rdef) files to a
file with attributes.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@21708 a95241bf-73f2-0310-859d-f6bbb57e9c96
manager, some drivers).
* Commented out nbd for the time being and added remote_disk.
* Consequent use of boot links.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@21604 a95241bf-73f2-0310-859d-f6bbb57e9c96
generates a C source file defining an array variable containing the file's
data. DataFileToSourceFile is the respective jam rule.
The idea is to directly built the boot archive into the boot loader for
network booting (and thus avoiding to download it from somewhere). In
case of PXE this doesn't work, though, due to restrictions to the size
of the NBP. Maybe Open Firmware is less restrictive.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@21602 a95241bf-73f2-0310-859d-f6bbb57e9c96
work on arbitrary "containers". The image rules are just
specializations.
* Added rules, a definition file (build/jam/NetBootArchive), and a shell
script for creating a gzipped tar archive containing kernel and modules
required for network booting (the contents may need some fine-tuning).
ATM it can be built via the haiku-netboot-archive pseudo target. It is
generated in the output directory (e.g. "generated").
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@21591 a95241bf-73f2-0310-859d-f6bbb57e9c96
To log in, user is "baron" (if you haven't overridden the $USER environment variable),
and the password is empty (ie. just press return).
Note, the password is currently hardcoded into src/system/libroot/posix/pwd.c.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@21561 a95241bf-73f2-0310-859d-f6bbb57e9c96
relevant for the image creation.
* The CopySetHaikuRevision propagates the value of the
HAIKU_INCLUDE_IN_IMAGE variable from the source to the target.
* Propagate the value of HAIKU_INCLUDE_IN_IMAGE from "kernel" to
"kernel_$(TARGET_ARCH)".
Now "jam update-install kernel" should work as expected.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@21527 a95241bf-73f2-0310-859d-f6bbb57e9c96
Gerald.
* Added Gerald Zajac and Jan Kloetzke to the list of contributors.
* Added the s3savage driver and accelerant to the image.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@21478 a95241bf-73f2-0310-859d-f6bbb57e9c96
* Use Object{Cc,C++}Flags instead of setting {CC,C++}FLAGS on the
objects directly.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@21438 a95241bf-73f2-0310-859d-f6bbb57e9c96
-The biggest problem with linking host libraries (libbe_build and libroot_build) was not having the source files compiled with the -fPIC flag. As far as I can tell, we want to do this on all of the other host platforms as well, so hacked the jam files a bit to add it.
Forgive me if I've committed more Jamfile sins.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@21423 a95241bf-73f2-0310-859d-f6bbb57e9c96
1. Deleted headers/shared/
2. Added a Jamfile to src/shared to build it into a static library libshared.a.
3. Removed my changes in the build/jam directory.
4. Have ShowImage include libshared.a.
I forgot to add AboutWindow.h to headers/private/shared. I will do that next.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@21402 a95241bf-73f2-0310-859d-f6bbb57e9c96
despite being talked about repeatedly, does not currently exist.
Adding this required adding some new Jam rules to deal with this shared source
directory and headers. I had some fun figuring this out. Despite writing
articles about Jam in the Haiku newsletter a few years ago I still find Jam to
be a PITA at times.
But my solution seems to work pretty well. Basically you just call the rule
UseSharedSource and pass the name of the shared source file you want to use.
This rule sets up the header directories and the right Jam variables for the
source file. You then add the source file to the source list in the Application
rule like any other source file.
I also made the authors list sent to the about window constructor null
terminated instead of passing the size of the array, as suggested by Hugo.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@21391 a95241bf-73f2-0310-859d-f6bbb57e9c96
/boot/beos/apps, but a folder containing links to _selected_
apps in that folder
* a new entry "Desktop Applets" has been added, which contains
all the apps that you either do or do not start at system boot,
but don't need frequent access to
* some apps have been hidden:
- ShowImage and Expander are usually not
directly started on their own, but through double clicking documents
- AboutSystem is invoked elsewhere from the Leaf menu, so it doesn't need
to clutter the Applications menu
* we almost introduced a third category for rarely used apps, but in the
end it would only have contained Installer, Icon-O-Matic and Diskprobe,
and we felt that it is ok to leave these in the Applications menu, as long
as their number is small
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@21374 a95241bf-73f2-0310-859d-f6bbb57e9c96
manually because of some not-yet-fixed deficiencies in the disk device manager.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@21205 a95241bf-73f2-0310-859d-f6bbb57e9c96
compatibility relation to the official Haiku distribution. "official"
is for the official Haiku distribution itself, "compatible" for Haiku
Compatible (tm) distros, and "default" for all others (the default value
for the option). The build system variable HAIKU_DISTRO_COMPATIBILITY is
defined accordingly, and one of the
HAIKU_DISTRO_COMPATIBILITY_{OFFICIAL,COMPATIBLE,DEFAULT} macros is
defined for source code and rdefs.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@21177 a95241bf-73f2-0310-859d-f6bbb57e9c96
libroot). It's available in the kernel through the private
get_haiku_revision() and added to the kernel syslog output.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@21173 a95241bf-73f2-0310-859d-f6bbb57e9c96
building on Mac OS X (Darwin). A problem with makebootable remains.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@21165 a95241bf-73f2-0310-859d-f6bbb57e9c96
platforms. Funny that it still isn't the default, anyway.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@21083 a95241bf-73f2-0310-859d-f6bbb57e9c96
also renamed their accelerants and settings files accordingly.
* Added Mandelbrot and GLDirectMode as demo applications.
* Moved CortexAddOnHost to /bin.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@21010 a95241bf-73f2-0310-859d-f6bbb57e9c96
the image.
* Moved "nc" to the alphabetically ordered position.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@20656 a95241bf-73f2-0310-859d-f6bbb57e9c96
beginning of the string; it was formerly matched anywhere.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@20610 a95241bf-73f2-0310-859d-f6bbb57e9c96
xattrs. It can be enabled with the configure switch "--use-xattr". Note
that the amount of data stored in attributes may be limited by the used
file system -- e.g. AFAIK ext3 has a limit of one block (usually 4 KB)
for all attributes of a file, which might not suffice. XFS should be
fine, as should ReiserFS 3.6 (or any FS which stores attributes in
hidden files).
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@20609 a95241bf-73f2-0310-859d-f6bbb57e9c96
translators pass "true" (was used before), but I suppose most of them
don't really need it.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@20605 a95241bf-73f2-0310-859d-f6bbb57e9c96
shuffled "isExecutable" to the end. The new order favors the common use
cases. Adjusted all Addon invocations and while at it also removed
separate LinkAgainst invocations.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@20604 a95241bf-73f2-0310-859d-f6bbb57e9c96
with image files. E.g.
jam -q update-image libbe.so kernel_x86
will only build libbe.so and the kernel (if necessary) and copy them
onto the already existing Haiku image. The MIME DB will not be
reinstalled, and only those source directories will be copied for which
the AddSourceDirectoryToHaikuImage rule is given a second argument
(e.g. "1"). The image will otherwise remain unchanged.
The "update-vmware-image" and "update-install" work similarly for the
VMWare image and the directory installation respectively. Note that, due
to the way the VMWare image is created (prepending a header to the
standard image), the file itself is fully rebuilt, i.e. changes made
during the emulation will be lost after updating the VMWare image.
The feature requires Haiku's jam. With other jam versions a similar
effect can be reached by accordingly setting the HAIKU_IMAGE_UPDATE_ONLY
and HAIKU_INCLUDE_IN_IMAGE in the UserBuildConfig file.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@20602 a95241bf-73f2-0310-859d-f6bbb57e9c96
line to jam that contains build targets and that will be executed by
the build system after building the targets and replacing their
occurrences in the command line by their paths. The keyword indicating
such a command line is "run", targets are marked by a leading ":".
E.g.:
jam -q run ':<build>xres' -l :libtracker.so
This builds the xres tool for the host platform and libtracker.so for
Haiku, and afterwards lists the resources libtracker.so contains. Note,
that this feature requires using Haiku's jam version.
The functionality is implemented by the new RunCommandLine rule, which
can, of course, also be used in the UserBuildConfig.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@20598 a95241bf-73f2-0310-859d-f6bbb57e9c96
invocation, and NewUniqueTarget, which returns a unique target name.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@20597 a95241bf-73f2-0310-859d-f6bbb57e9c96
operate manually on digit lists, so they are certainly not fast and shouldn't
be used excessively, but at least it's possible to do calculations in Jam now,
should the need arise.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@20596 a95241bf-73f2-0310-859d-f6bbb57e9c96
again for target libbe_test. Added respective syscall stubs and other functions
to libhaikucompat.a.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@20447 a95241bf-73f2-0310-859d-f6bbb57e9c96
Integration patch from kaliber as of bug #1127, with a minor fix. Thanks!
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@20438 a95241bf-73f2-0310-859d-f6bbb57e9c96
* Added rule AddSourceDirectoryToHaikuImage to copy source directories
onto the image. They will be placed in /boot/home/HaikuSource/...
according to their relative path. This should make it a bit more
comfortable to use gdb as a source level debugger. Alas, the
directories have to be made known to gdb individually (with the
"directory" command). I guess we should update to 6.6...
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@20415 a95241bf-73f2-0310-859d-f6bbb57e9c96
* The settings are still saved in "config/settings/BeMail Settings", though.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@20389 a95241bf-73f2-0310-859d-f6bbb57e9c96
with gcc 4. Fixed resulting build errors (gcc is more lenient for
headers in -isystem directories).
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@20386 a95241bf-73f2-0310-859d-f6bbb57e9c96
* Added new rule HaikuSubInclude for more comfortable subdirectory inclusion.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@20352 a95241bf-73f2-0310-859d-f6bbb57e9c96
turn off the inclusion of src/Jamfile, and the rule DeferredSubInclude to
include a subdirectory in UserBuildConfig. Together they allow a developer
working on a subproject to reduce jam's parsing time when only building the
subproject. Relevant mostly on BeOS; on Linux jam is pretty fast anyway.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@20321 a95241bf-73f2-0310-859d-f6bbb57e9c96
directory, the build system root directory, or the "src" directory is
now using the "haiku-image" target instead. The variable
HAIKU_ORIGINAL_JAM_TARGETS is set to the original JAM_TARGETS value, so
that a UserBuildConfig can base its decisions on it.
The feature is only available with Haiku's jam version.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@20194 a95241bf-73f2-0310-859d-f6bbb57e9c96
stale dependencies after renaming or deleting object files.
This will avoid link error like the one that was caused by the
recent mesa update.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@20148 a95241bf-73f2-0310-859d-f6bbb57e9c96
containing the Haiku SVN revision number which is used by uname(). The
value is 0 when built, but updated by the build system before copying
libroot to the image (new rule CopySetHaikuRevision).
* For AboutHaiku we no longer write the SVN revision number into a
resource. Instead we use the uname() info.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@20082 a95241bf-73f2-0310-859d-f6bbb57e9c96
debug only if you specify TEST_DEBUG. The debug binaries don't seem to
work right anyway.
Hopefully this didn't mess anyone up.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@20061 a95241bf-73f2-0310-859d-f6bbb57e9c96
build Haiku. Uncomment it to define "-pipe" which may speed up your build process
a bit if you have enough memory (it's about 25% faster on a test case over here
with BeOS).
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@20015 a95241bf-73f2-0310-859d-f6bbb57e9c96
vmdkheader tool. New pseudo target haiku-vmware-image to build it.
Image default name is "haiku.vmdk", adjustable via the
HAIKU_VMWARE_IMAGE_NAME variable.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@19982 a95241bf-73f2-0310-859d-f6bbb57e9c96
