- Switch to Python3
- Switch to mawk instead of gawk
- Update ffmpeg (there are several new dependencies)
- Update ICU
- Fix various pre-existing problems with packages not being properly
declared for gcc2 (but somehow it ended up working)
- remove curl, subversion, mercurial
Confirmed that both nightly and release images are building fine on both
32 and 64bit. However, non-x86 architecture may require re-bootstrapping
to do a complete nightly or release image build (the minimal profile
should be fine)
Fixes#16751.
Change-Id: Iacac92923c4113b3e0a49a64b0b4cc1b8e2f5e2e
Reviewed-on: https://review.haiku-os.org/c/haiku/+/3871
Reviewed-by: Adrien Destugues <pulkomandy@gmail.com>
The @image build is not used anymore and doesn't work. Use @nightly-raw
or @nightly-anyboot instead. The new method of release type/image type
configuration of profiles is more flexible and allows to manage the
various configurations a lot more easily for us. But the old profiles
were never formally deprecated.
Fixes#15963
Change-Id: I1c72f0e77bfbcda10502476e595f120280e8c7a4
Reviewed-on: https://review.haiku-os.org/c/haiku/+/2625
Reviewed-by: waddlesplash <waddlesplash@gmail.com>
Activating all these packages on live boot (especially live DVD where we
also have the write overlay eating up RAM) significantly increases
memory requirements for running Haiku, to the point that Installer may
fail to run. Move them outside the packages/ directory so they are not
activated.
Installer already skips the _sources_ directory when installing, and
lists the contents of _packages_ with checkbox to decide what to include
in the install (they are put in system/packages on the target disk).
Fix from previous version: the Haiku package was installed to /system
instead of /system/packages.
Fixes#15621.
Activating all these packages on live boot (especially live DVD where we
also have the write overlay eating up RAM) significantly increases
memory requirements for running Haiku, to the point that Installer may
fail to run. Move them outside the packages/ directory so they are not
activated.
Installer already skips the _sources_ directory when installing, and
lists the contents of _packages_ with checkbox to decide what to include
in the install (they are put in system/packages on the target disk).
Fixes#15621.
Change-Id: Ibfac14c43dbe708316a0d82ca1c9d49b5cba2aef
Reviewed-on: https://review.haiku-os.org/c/haiku/+/2157
Reviewed-by: Sergei Reznikov <diver@gelios.net>
Reviewed-by: waddlesplash <waddlesplash@gmail.com>
* Re ML discussions, this should make a lot more
sense to users as it is inline with what most
linux distros ship.
* This will require a tweak to the buildbot.
* First step to shipping anyboot instead of plain iso.
If additional parameters are specified, only those targets are built,
but under the influence of the build profile. E.g. "jam @alpha-raw build
haiku.hpkg" builds the package with SSL support, while "jam haiku.hpkg"
would build it without (unless explicitly enabled in UserBuildConfig).
* All packaging architecture dependent variables do now have a
respective suffix and are set up for each configured packaging
architecture, save for the kernel and boot loader variables, which
are still only set up for the primary architecture.
For convenience TARGET_PACKAGING_ARCH, TARGET_ARCH, TARGET_LIBSUPC++,
and TARGET_LIBSTDC++ are set to the respective values for the primary
packaging architecture by default.
* Introduce a set of MultiArch* rules to help with building targets for
multiple packaging architectures. Generally the respective targets are
(additionally) gristed with the packaging architecture. For libraries
the additional grist is usually omitted for the primary architecture
(e.g. libroot.so and <x86>libroot.so for x86_gcc2/x86 hybrid), so that
Jamfiles for targets built only for the primary architecture don't
need to be changed.
* Add multi-arch build support for all targets needed for the stage 1
cross devel package as well as for libbe (untested).
It allows to control the compression level used for package creation
and update. The default (9) is *very* slow, so developers may want to
use a smaller level during the regular development process to keep
turn-around times low.
Instead of the boolean alwaysUpdate, isCDPackage, and stripDebugSymbols
parameters use a uniform flags parameter which can contain any of the
respectively supported flags (alwaysUpdate, cdPackage,
stripDebugSymbols, !stripDebugSymbols).
To note, the reduction of block size from 2048 to 1024 was not applied.
Introduced a new build variable HAIKU_STRIP_DEBUG_FROM_OPTIONAL_PACKAGES,
which will allow users to enable/disable that functionality. In the
alpha-* and nightly-* profiles, it is enabled. Reduced the image size
for alpha-* to 690M. The size for nightly images was left untouched.
+alpha3
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@41812 a95241bf-73f2-0310-859d-f6bbb57e9c96
Add Jam rule SuppressOptionalHaikuImagePackages as a mechanism to keep
packages from being installed.
Extend the UserBuildConfig.ReadMe document to cover the new command.
Closes ticket #6260.
Changes from v1:
* Simplified IsOptionalHaikuImagePackageAdded as suggested by Ingo.
* Added example as documentation.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@38100 a95241bf-73f2-0310-859d-f6bbb57e9c96
* InstallOptionalHaikuImagePackage: Made the first argument an actual file
name, i.e. the extension ".zip" is no longer appended by it.
* Renamed rules UnzipArchiveTo{Container,HaikuImage} to
ExtractArchiveTo{Container,HaikuImage} and generalized them to support
tgz/tar.gz archives (implemented in build_haiku_{image,cd}).
* Removed DownloadOptionalPackage. DownloadFile is used instead.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@35634 a95241bf-73f2-0310-859d-f6bbb57e9c96
in others, and those where we already provide functionality for (VLC, Beam).
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@31581 a95241bf-73f2-0310-859d-f6bbb57e9c96
build/jam/OptionalPackageDependencies and include it earlier (before the
Jamfiles).
* Introduced build/jam/OptionalBuildFeatures which is supposed to do the setup
for optional build features that need it.
* Renamed USE_SSL to HAIKU_BUILD_FEATURE_SSL and made it more intelligent.
The OpenSSL optional package is downloaded and unzipped automatically when
enabled. Switching between enabled/disabled HAIKU_BUILD_FEATURE_SSL is
handled gracefully -- the concerned components are built in separate
subdirectories. Adding the OpenSSL optional package to the image also enables
HAIKU_BUILD_FEATURE_SSL.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@30021 a95241bf-73f2-0310-859d-f6bbb57e9c96
* Made the TimeZoneView less error prone, and also actually use Haiku code (the
previous check didn't work since it used #if, not #ifdef).
* Also took the liberty to rename our boot loader to haiku_loader, since I had
to update the nasm binary anyway. Updated the assembly sources to nasm 2.0.
* I haven't found where the synth location in the MIDI code is specified,
though.
* Also, NetBootArchive, and FloppyBootImage haven't been updated yet. Will do
so next.
* Some optional packages still put their license to beos/etc/licenses. I didn't
update them yet, as we'll probably do so anyway at some point. Also, I think
we might want to introduce a common/data/licenses instead for those.
* If you encounter any problems, please tell!
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@29876 a95241bf-73f2-0310-859d-f6bbb57e9c96
--alternative-gcc-output-dir configure option has been specified,
HAIKU_ADD_ALTERNATIVE_GCC_LIBS is set by default. One has to explicitely
unset it in UserBuildConfig to avoid building the alternative gcc libs.
* Adjusted documentation accordingly.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@29607 a95241bf-73f2-0310-859d-f6bbb57e9c96
UserBuildConfigRulePreImage, and UserBuildConfigRulePostImage which will be
invoked at different points in the build system execution. They can be
overridden in UserBuildConfig, thus allowing for executing user code at
those points.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@28765 a95241bf-73f2-0310-859d-f6bbb57e9c96
4). One has to have a (fully configured) "generated" directory for the
alternative gcc and specify it using the new option
"--alternative-gcc-output-dir" when configuring the main build.
Additionally the build variable HAIKU_ADD_ALTERNATIVE_GCC_LIBS has to be
set to "1".
If that has been done, when building the image a sub-jam is invoked that
generates the alternative libs and zips them. The main-jam unzips them
into the correct directory in the image. Note that the JAM build
variable has to be set when using a jam executable not invoked by "jam".
Tested with gcc 2 NetPositive, Pe, and FireFox under gcc 4 Haiku, and
with a few of the standard gcc 4 Haiku apps under gcc 2 Haiku. Seems to
work fine so far.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@25536 a95241bf-73f2-0310-859d-f6bbb57e9c96
Especially people building various kinds of images with different
settings may want to have a look at the respective section in the
UserBuildConfig.ReadMe.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@24757 a95241bf-73f2-0310-859d-f6bbb57e9c96
functions by ones reading /etc/{group,passwd}.
* Added quasi-standard getpwent_r() and getgrent_r().
* Added _SC_GETGR_R_SIZE_MAX and _SC_GETPW_R_SIZE_MAX sysconf()
constants.
* Moved initgroups() and getgrouplist() definition to grp.cpp. They use
the same backend as the <grp.h> functions.
* Set the permissions of files created by the build system to what they
should be on the image (executables: 755, others: 644). Otherwise only
root could do anything under Haiku.
* Added build system variables HAIKU_ROOT_USER_NAME and
HAIKU_ROOT_USER_REAL_NAME to customize name and real name of Haiku's
root user.
* Added build system rules AddUserToHaikuImage and AddGroupToHaikuImage
for adding additional users and groups (by default only root user and
group and a "users" group are created).
* Adjusted BIND port and coreutils config.h files according to what
features have become available.
* Fixed HAIKU_DOCUMENTATION_OBJECT_DIR definition. Untested, but it used
a wrong variable name before.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@24750 a95241bf-73f2-0310-859d-f6bbb57e9c96
* Added additional parameters to DeferredSubInclude. It's now possible
to specify an alternative Jamfile name.
* Added DeferredSubInclude example to UserBuildConfig.ReadMe showing the
new feature.
* Moved ExecuteDeferredSubIncludes in the root Jamfile before the
inclusion of HaikuImage, NetBootArchive etc., so that targets defined
in the subdirectories are already known there.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@24680 a95241bf-73f2-0310-859d-f6bbb57e9c96
directory to the image. It supports exclude patterns.
* Changed Add{Source,Header}DirectoryToHaikuImage to use the
CopyDirectoryToHaikuImage rule. The special handling in the
build_haiku_image script is gone now.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@24586 a95241bf-73f2-0310-859d-f6bbb57e9c96
uncommented the meaty lines again. Added one or two more explaining
sentences.
* Created a concise UserBuildConfig.sample with very few comments and
only the most interesting (commented out) example lines for those
people who don't read the UserBuildConfig.ReadMe.
I hope everyone can live with this solution.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@24350 a95241bf-73f2-0310-859d-f6bbb57e9c96
