various system information.
* Implemented retrieving some VM stats via this call.
* The VM now maintains a page fault counter, and sets system_info::page_faults
accordingly.
* Added a (pretty simple) "vmstat" command line app.
* Minor cleanup.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@27597 a95241bf-73f2-0310-859d-f6bbb57e9c96
architecture: for now, we do this on the lowest layer only, therefore all
requests are handled synchronously (ie. in the scheduler's thread).
* Instead of using the block_io module, scsi_disk (and scsi_cd) are now
exporting a device on their own, and use an I/O scheduler with an appropriate
DMA resource.
* There are still lots of TODOs, and it can easily panic - don't update if
you intend to demo Haiku.
* scsi_periph now only has an io() function that get an io_operation, instead
of the previous read/write functions, moved preferred CCB size from those
functions into the device registration.
* Changed all scsi_periph files to C++.
* scsi_cd ported, too, but untested.
* Removed block_io from image - it will be removed completely soon.
* Temporarily commented an ASSERT() in the ATA bus manager (in case you use
it); it's sometimes triggered by the code now, and I haven't yet looked into
the issue -- doesn't seem to harm, at least.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@26828 a95241bf-73f2-0310-859d-f6bbb57e9c96
in Tracker add-ons folder with short cut (like done for Backgrounds). Untested.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@26739 a95241bf-73f2-0310-859d-f6bbb57e9c96
screen mode from the command line.
* With its "--fall-back" parameter, it's also thought to be called from BWindow
when a specific shortcut has been pressed (similar to screenshots) - this
part is not implemented yet. Anyone against <Command><Control>-<Escape>?
* Added it to the image.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@26150 a95241bf-73f2-0310-859d-f6bbb57e9c96
less.
* Added /etc/vim/vimrc. Besides fixing key mappings it also disables
compatibility mode and adjusts some settings to make using vi a more
pleasant experience.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@26028 a95241bf-73f2-0310-859d-f6bbb57e9c96
Temporarily removed the VESA driver, as long as it only builds on x86.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@25913 a95241bf-73f2-0310-859d-f6bbb57e9c96
controller. The device doesn't use the PCI_ide subclass (but
PCI_mass_storage_other) and requires not using compatibility mode. Otherwise
it's pretty much the generic_ide_pci driver.
* Directly adding the driver to the image.
This driver could either be merged into the generic ide driver so it supports
not quite standard devices, or this could be made into a driver that collects
all those non standard devices. Either way, this works for now and lets my
machine boot off the IDE drive :-)
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@25868 a95241bf-73f2-0310-859d-f6bbb57e9c96
should make default images bootable from USB automatically. DDing one to a
USB stick should work out of the box then (but this wipes the stick of course).
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@25836 a95241bf-73f2-0310-859d-f6bbb57e9c96
* Minor cleanup of ide_isa, and generic_ide_pci (removed wrapper.h).
* Added ide_isa back to the image.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@25755 a95241bf-73f2-0310-859d-f6bbb57e9c96
* Added legacy_sata and scsi_cd back to the image.
* Minor cleanup in scsi_disk.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@25739 a95241bf-73f2-0310-859d-f6bbb57e9c96
* Renamed scsi_dsk to scsi_disk.
* Joined all scsi_disk sources together to a single scsi_disk.cpp file.
* Cleanup.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@25737 a95241bf-73f2-0310-859d-f6bbb57e9c96
* Removed std_ops(), as it wasn't used for anything, and is optional in Haiku.
* ide_isa, and legacy_sata are still waiting for the same set of changes :-)
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@25678 a95241bf-73f2-0310-859d-f6bbb57e9c96
* Moved devfs from fs/ to device_manager/, and separated the legacy driver
support from it.
* Removed fast_log module.
* There are a couple of (temporary) regressions, though:
- legacy SATA and ISA IDE support is disabled, the drivers haven't been
ported yet.
- The not yet used ATA bus manager hasn't been ported yet, either.
- AHCI changes have not been tested.
- the listdev command has been removed from the build (as it currently
doesn't work anymore).
- device manager generated IDs currently are not freed anymore when a device
node is removed.
- generic drivers can't yet use the new driver architecture.
- simple busses that do not support device types won't work yet.
- legacy driver publishing/unpublishing (ie. what USB needs) has not been
tested, and may be broken.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@25662 a95241bf-73f2-0310-859d-f6bbb57e9c96
Gerald Zajac. Thanks a lot!
* Also put it on the image by default.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@25583 a95241bf-73f2-0310-859d-f6bbb57e9c96
pointer also contains the toggle carry and the halt bit (which was obviously
always set as the endpoint had an error) the address comparison failed and
the head was dead in the water with all further transfers timing out until
a subsequet cancel cleaned the mess up again.
* Add the OHCI host controller driver to the image as it should now be fully
functional except for isochronous transfers.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@25565 a95241bf-73f2-0310-859d-f6bbb57e9c96
4). One has to have a (fully configured) "generated" directory for the
alternative gcc and specify it using the new option
"--alternative-gcc-output-dir" when configuring the main build.
Additionally the build variable HAIKU_ADD_ALTERNATIVE_GCC_LIBS has to be
set to "1".
If that has been done, when building the image a sub-jam is invoked that
generates the alternative libs and zips them. The main-jam unzips them
into the correct directory in the image. Note that the JAM build
variable has to be set when using a jam executable not invoked by "jam".
Tested with gcc 2 NetPositive, Pe, and FireFox under gcc 4 Haiku, and
with a few of the standard gcc 4 Haiku apps under gcc 2 Haiku. Seems to
work fine so far.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@25536 a95241bf-73f2-0310-859d-f6bbb57e9c96
Added a new command line utility "mkfs" which can initialize a given volume
with a file system by it's short name via the new Disk Device API.
Thanks!
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@25491 a95241bf-73f2-0310-859d-f6bbb57e9c96
* The built-in services are no longer added as resource to libnetwork,
but as attribute. This removes the libbe dependency.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@25485 a95241bf-73f2-0310-859d-f6bbb57e9c96
AddLicenseToHaikuImage that can be used in optional package definitions
to add a copyright entry in AboutSystem and add a license file to
/etc/licenses.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@25313 a95241bf-73f2-0310-859d-f6bbb57e9c96
a bit:
* Added directory /etc/post_install, which can contain scripts that will
be executed on the first boot.
* Moved the mimeset invocations to such a script. Use the "-apps"
option instead of "-all". Since create_app_meta_mime() (and thus
mimeset) work recursively now, running the commands does actually have
an effect.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@25309 a95241bf-73f2-0310-859d-f6bbb57e9c96
* Whenever unzipping a zip archive to the image, we do first check, if
it contains an .OptionalPackageDescription file. If so, its contents
is appended to AboutSystem's "COPYRIGHTS" attribute, which will cause
the respective info to be shown in the about view.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@25050 a95241bf-73f2-0310-859d-f6bbb57e9c96
* Also removed the header files that belong to those files.
* Only kept the userland_ipc.h header for now, to remember us about the
former userland server driver (that I also removed - it can always be
resurrected from SVN if needed).
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@25045 a95241bf-73f2-0310-859d-f6bbb57e9c96
new filesystem interface.
* Renamed sISO* to gISO* though as they are in fact not static.
Briefly tested and works as expected. Thanks for your work Dustin!
Closes enhancement #2089.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@24994 a95241bf-73f2-0310-859d-f6bbb57e9c96
was, thanks to the detailed instructions from Ingo, quite doable.
* Ported the (deprecated and now publically removed) notify_listener() calls
to the respective new notify_* calls.
* Fixed debug build.
* Added the FAT filesystem back to the image.
I only tested the filesystem briefly and everything seemed to work as expected
(mounted the FAT part of my bootable Haiku memory stick, opened a few files
and copied something to it). At least it should not be any more broken than
before the interface changes ;-).
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@24987 a95241bf-73f2-0310-859d-f6bbb57e9c96
suites and the like, and moved the image jam code for PosixTestSuite
and libMicro there.
* Some cleanup (line length, use grist).
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@24970 a95241bf-73f2-0310-859d-f6bbb57e9c96
- The net_stack driver is no longer used. Instead we have a kernel
module which is directly used by syscall implementations in the
kernel. I.e. we no longer tunnel those functions through ioctls, but
have normal syscalls.
- Removed the superfluous net starter module.
- Implemented the FDTYPE_SOCKET type file_descriptors, that is sockets
are no longer vnode based.
- Adjusted libnetwork (the socket function implementations)
accordingly.
- Adjusted netstat accordingly.
* Socket module:
- Implemented socketpair().
- Added "kernel" parameter to the control hook. Quite a few more hooks
would actually need the parameter, but I didn't change those yet,
since that would probably also require changes to the protocol
module interface.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@24908 a95241bf-73f2-0310-859d-f6bbb57e9c96
- Moved most file_system_module_info hooks into separate structures.
Those that operate on mounted volumes to fs_volume_ops, those
operating on a vnode to fs_vnode_ops.
- Got rid of the fs_volume, fs_cookie, fs_vnode typedefs. We use void*
again.
- Instead of a void* volume and node cookie hooks are passed a
fs_volume and fs_vnode structure pointer, which contain the cookie
and an ops pointer (fs_volume a few more things).
- The VFS {new,publish,get,...}_vnode() functions take a fs_volume*
instead of the volume ID. So does vfs_get_fs_node_from_path().
- Added type and flags arguments to publish_vnode() and the
get_vnode() hook and removed the type argument from lookup() hook.
Added vnode::type using formerly unused bits to store the node type.
Simplified a few things in the VFS due to the now always available
node type.
- Added fs_volume_ops::{create,delete}_sub_vnode() and
fs_vnode_ops::get_super_vnode() hooks. They are used to support file
system layers, e.g. allowing to extend an FS not supporting BeOS
attribute with attribute support. Needs some more work in the VFS.
- Added fs_vnode_ops::create_special_node() hook for creating special
nodes (e.g. FIFOs).
* Adjusted the built-in file systems and BFS according to the interface
changes. Removed all other FSs from the image for the time being.
We'll see whether further API changes are necessary before porting
them.
* Adjusted the bfs_shell accordingly.
* Implemented create_special_node() in rootfs to support special nodes.
* Added support for FIFOs:
- Added syscall _kern_create_fifo() (used by mkfifo()), which creates
a special node (type S_IFIFO) in the respective file system.
- When a special node is published the VFS creates a respective sub
node. Currently only FIFOs are supported.
- Added a little support for FIFO subnodes by using functionality from
the pipefs.
- Added mkfifo to the image. It can create FIFOs in the rootfs, but
the FIFOs aren't really usable ATM, since they still work like
pipes, i.e. readers and writers need to have them open at the same
time.
* Some smaller changes in the VFS:
- Made the *_CALL macros nicer to use (vargs).
- Refactored FS entry lookup into new function lookup_dir_entry().
- create_vnode() no longer just calls the FS create() hook. First it
looks up the entry and uses open_vnode(), if it already exists. This
is necessary for two reasons: 1) The FS might not support create()
while still allowing to open() entries. 2) When the FS has other
layers on to of it (or the respective node) it might not be
responsible for opening the node.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@24816 a95241bf-73f2-0310-859d-f6bbb57e9c96
by default (new option "-H" will create the header only). Option "-c"
will clear the image.
* Adjusted build_haiku_image accordingly. vmdkimage is way faster and
more portable than the former vmdkheader+dd combo.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@24784 a95241bf-73f2-0310-859d-f6bbb57e9c96
Especially people building various kinds of images with different
settings may want to have a look at the respective section in the
UserBuildConfig.ReadMe.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@24757 a95241bf-73f2-0310-859d-f6bbb57e9c96
functions by ones reading /etc/{group,passwd}.
* Added quasi-standard getpwent_r() and getgrent_r().
* Added _SC_GETGR_R_SIZE_MAX and _SC_GETPW_R_SIZE_MAX sysconf()
constants.
* Moved initgroups() and getgrouplist() definition to grp.cpp. They use
the same backend as the <grp.h> functions.
* Set the permissions of files created by the build system to what they
should be on the image (executables: 755, others: 644). Otherwise only
root could do anything under Haiku.
* Added build system variables HAIKU_ROOT_USER_NAME and
HAIKU_ROOT_USER_REAL_NAME to customize name and real name of Haiku's
root user.
* Added build system rules AddUserToHaikuImage and AddGroupToHaikuImage
for adding additional users and groups (by default only root user and
group and a "users" group are created).
* Adjusted BIND port and coreutils config.h files according to what
features have become available.
* Fixed HAIKU_DOCUMENTATION_OBJECT_DIR definition. Untested, but it used
a wrong variable name before.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@24750 a95241bf-73f2-0310-859d-f6bbb57e9c96
TODO:
- Implement/integrate low level stuff (see BootDrive.h)
- reading the partition table
- reading/writing the MBR
- writing the boot menu
- Open file dialog for selection of backup MBR file
- Write error message in case of I/O errors
- Test
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@24689 a95241bf-73f2-0310-859d-f6bbb57e9c96
- Added a "root" vnode to the io_context. It is used for resolving
paths and converting nodes to paths instead of sRoot. Some more
passing around of io_context structures was necessary.
- Introduced a new lock sIOContextRootLock to protect
io_context::root. The current uses of io_context::io_mutex
(put_vnode(), remove_vnode() while holding it) looked too suspicious
to use that mutex in vnode_path_to_vnode().
- Added _kern_change_root() syscall and chroot() libroot function.
- Added chroot coreutils program to the image. Funnily it seems to be
much easier to set up a little jail than under Linux (just copy
bash and libroot.so into respective subdirs; mount another pipefs
if you want pipe support).
With Haiku allowing direct access to directories via inode IDs
jailing is obviously not very secure at the moment.
- Added /var/empty to the image. It will be the chroot target for ssh.
* Changed vfs.cpp:get_cwd() so that the io_context::io_mutex is no
longer held when calling dir_vnode_to_path().
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@24673 a95241bf-73f2-0310-859d-f6bbb57e9c96
and sorted definitions alphabetically.
* Updated Pe package to 2.4.1.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@24659 a95241bf-73f2-0310-859d-f6bbb57e9c96
* Simplified the addition of the libpng and zlib headers.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@24656 a95241bf-73f2-0310-859d-f6bbb57e9c96
specifying the name of the header directory on the image.
* Renamed the "gnu" header directory on the image to "3rdparty" and
created a "gnu" symlink for compatiblity.
* Added zlib and libpng headers to the "3rdparty" header dir.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@24600 a95241bf-73f2-0310-859d-f6bbb57e9c96
directory to the image. It supports exclude patterns.
* Changed Add{Source,Header}DirectoryToHaikuImage to use the
CopyDirectoryToHaikuImage rule. The special handling in the
build_haiku_image script is gone now.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@24586 a95241bf-73f2-0310-859d-f6bbb57e9c96
* Extended the Development optional package. It will now also install
gcc/binutils as well as autoconf, automake, libtool, texinfo (and
their dependency perl).
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@24567 a95241bf-73f2-0310-859d-f6bbb57e9c96
* Install libncurses.a.
* Copy the cpp headers from our repository; don't use the compiler
headers. This needs some more shuffling around.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@24543 a95241bf-73f2-0310-859d-f6bbb57e9c96
so one can set it to the static libroot, if desired.
* Generic attribute emulation:
- Added build tool rm_attrs, a simple "rm" replacement, which also
removes the attributes directory for a given file.
- Added build/scripts/rm_attrs shell script, which wraps the
invocation of the rm_attrs tool. If it doesn't exist yet, the
ordinary rm is used.
- The RM jam variable refers to the rm_attrs script now, i.e. whenever
something is removed by the build system, the attributes are removed
too (if the build tool has already been built, that is).
- Removed the shell function attrrmrf() in build_haiku_image. We use
the rm_attrs tool instead, if necessary.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@24528 a95241bf-73f2-0310-859d-f6bbb57e9c96
* Also install _G_config.h.
* /boot/develop/headers/cpp is a symlink to g++'s headers, now.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@24523 a95241bf-73f2-0310-859d-f6bbb57e9c96
* This allows you to use a GCC compiler completely with native headers,
all you have to do (after having unpacked and moved GCC to the correct
location), is to replace its "lib/gcc-lib/i586-pc-beos/2.95.3-beos-060710/include"
directory with this one. There is no need for R5 headers anymore,
then.
* Removed extraneous whitespace.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@24469 a95241bf-73f2-0310-859d-f6bbb57e9c96
* reordered addons alphabetically like we do for all plugins
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@24349 a95241bf-73f2-0310-859d-f6bbb57e9c96
works fine without those, the keymap file will be generated.
* Supplied the removed lines as example in UserBuildConfig.sample for how
to supply these settings during image generation.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@24298 a95241bf-73f2-0310-859d-f6bbb57e9c96
* Added VLC optional package. (I repackaged the latest BeBits version and
put it on www.yellowbites.com, which is a) much faster to download at
least from Germany and b) has the Haiku vector icon.)
* Exchanged the Pe package for a recent SVN build which also has the Haiku
vector icon.
Going to test all these changes on a Linux host soon, seems to work fine
on a BeOS host.
NOTE: The WonderBrush package has gotten a silent update, it includes the
icon in the resources now too, like the other packages with Haiku icon and
also fixes a problem in the Navigation view.
NOTE 2: The build system does not download packages again if generated/download
already contains a .zip with the name of the optional package. So you need
to delete those to get the recently updated Vision, Pe and WonderBrush
packages.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@24291 a95241bf-73f2-0310-859d-f6bbb57e9c96
built directly out of Haiku's build sys, which is to say against haiku's
headers, etc. directly, and b) includes Stephan's HVIF icon (thanks!).
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@24289 a95241bf-73f2-0310-859d-f6bbb57e9c96
Either app_server doesn't start it, or it exits right away...
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@24262 a95241bf-73f2-0310-859d-f6bbb57e9c96
/boot/home/config/settings.
* The Bootscript will check for the existance of this file and updates the
mime database with all the applications and preflets that come with the
install. Then it removes the indicator file.
This fixes the problem that all the apps are not known to the system until
you run them once. Ie "Open With..." and such stuff works out of the box.
Feel free to find a more elegant way, I just found this simple and effective.
:-)
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@24247 a95241bf-73f2-0310-859d-f6bbb57e9c96
putting the network "services" config file at the wrong place.
* Removed some dead code.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@24118 a95241bf-73f2-0310-859d-f6bbb57e9c96
Do not attempt to install optional 3rd party packages when building
a GCC4 version of Haiku. I think there has been some discussion on this
topic before, with a more advanced solution, but for the time being, this
should be ok.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@24087 a95241bf-73f2-0310-859d-f6bbb57e9c96
directories. Note that you need an updated "sed" (from the Haiku
repository) if you want to use that rule.
* The "Development" optional package now installs the Haiku headers
needed to build stuff (ie. "os", "gnu", and "posix"). It also makes
a symlink "be" so that we can still use the BeOS compiler with its
builtin header paths.
* Fixed AddVariableToScript for older shells that do not support '+='.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@24058 a95241bf-73f2-0310-859d-f6bbb57e9c96
entire screen when exiting the kernel debugger. It sets up a thread that sends
a message to the (currently hardcoded) desktop message looper. The desktop then
does mark the whole screen dirty which causes a full redraw.
Since interrupts need to be enabled I went with an asynchronous thread and
releasing a request sem in the add-ons' exit hook.
Added the add-on to the image as it shouldn't hurt to have it for now.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@24025 a95241bf-73f2-0310-859d-f6bbb57e9c96
Changed the way the VMware image is built. Instead of creating a normal
image first and then adding vmdk header and that image, we create the
VMware image in one go, now. Therefore "jam update-vmware-image ..."
does now actually update the VMware image directly, instead of updating
the normal image and recreating the VMware image.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@23972 a95241bf-73f2-0310-859d-f6bbb57e9c96
(P5W-DH motherboard have two of those gigabit ethernet controllers),
seems to work fine.
* Add libglut.so alias to the development libs symlinks.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@23902 a95241bf-73f2-0310-859d-f6bbb57e9c96
BLayout implementation (BALMLayout) using the Auckland Layout Model
(ALM). The original ALM was implemented by Christof Lutteroth, the
Haiku/C++ version by James Kim.
The code needs some review, but the test programs seem to work fine.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@23889 a95241bf-73f2-0310-859d-f6bbb57e9c96
* NetBootArchive still used "agp"; replaced it with agp_gart, and added the
Intel GART module as well.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@23873 a95241bf-73f2-0310-859d-f6bbb57e9c96
* Added it to the image, and configured it to be used.
* Currently, it cannot transfer files over 64 KB for some reason
("Message too long").
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@23843 a95241bf-73f2-0310-859d-f6bbb57e9c96
one has actually been compiled on Haiku and uses better network options, since
it uses BONE headers. On Rene's machine, this version is running since 2.5
days under Haiku. :-)
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@23795 a95241bf-73f2-0310-859d-f6bbb57e9c96
* It now also serves as a generic GART manager and accepts bus modules as well
as custom modules of graphics drivers if they want to (could be used for the
Radeon PCI GART stuff, for example).
* Implemented GART support module for Intel i965 and G33 chipsets (the other
Intel chips will come later).
* Renamed agp bus manager to agp_gart to reflect its new functionality (even
though the AGP functionality is already outdated (due to PCIe), the GART
stuff remains current).
* Adapted existing users of the AGP bus manager to the API changes.
* Not very well tested yet...
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@23754 a95241bf-73f2-0310-859d-f6bbb57e9c96
having these
* added DriveSetup to the image
* added optional package Pe, enable it in your UserBuildConfig
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@23670 a95241bf-73f2-0310-859d-f6bbb57e9c96
You know, moving stuff out of your way just because they don't work won't fix them...
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@23522 a95241bf-73f2-0310-859d-f6bbb57e9c96
* Added pthreads posix test suite tests to run script and image.
* Improved output for said tests.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@23002 a95241bf-73f2-0310-859d-f6bbb57e9c96
Hope having both doesn't do nasty things on gcc2 builds.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@22996 a95241bf-73f2-0310-859d-f6bbb57e9c96
* The POSIX test suite is copied to the image when the jam variable
HAIKU_ADD_POSIX_TEST_SUITE_TO_IMAGE is defined (cf. UserBuildConfig.sample).
* Added difftime and fork tests to the test suite run script.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@22907 a95241bf-73f2-0310-859d-f6bbb57e9c96
* Added an inputrc to the image that should have the same effect as the recent
bash readline default changes for other apps that use readline.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@22553 a95241bf-73f2-0310-859d-f6bbb57e9c96
* Changed ResAttr rule to allow not deleting the file before writing the
attributes.
* Added application signatures for the runtime_loader and zbeos, just so that
they may have an icon, too (hint, hint) :-)
* As a side effect, this also let's FileTypes handle these two as apps (even
though they aren't), so that I can close bug #606.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@22412 a95241bf-73f2-0310-859d-f6bbb57e9c96
already exist, it won't be zeroed out. The image will still be
initialized with BFS, though. Handy for installing Haiku on a partition.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@22397 a95241bf-73f2-0310-859d-f6bbb57e9c96
* Use the new ComplexLayouter for the more complex layouting tasks.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@22335 a95241bf-73f2-0310-859d-f6bbb57e9c96
* Made use of qoca opt-in. You have to set the jam/environment variable
LAYOUT_CONSTRAINT_SOLVER to "qoca" to do that. Unfortunately it turned
the latest version of qoca is GPL (only earlier version were LGPL; the
license included in the downloadable archive was misleading), so we can't
use it. Complex layouts constraints that would require constraint solver
support are ignored until I've found a replacement.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@22235 a95241bf-73f2-0310-859d-f6bbb57e9c96
HaikuImage and enabled individually using the
AddOptionalHaikuImagePackages rule or all at once by setting
HAIKU_ADD_ALL_OPTIONAL_PACKAGES. In principle an optional package can
be any kind of addition to the Haiku image, but usually a zip file will
be downloaded from somewhere and unzipped onto the image. I've added a
WonderBrush package as an example.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@22184 a95241bf-73f2-0310-859d-f6bbb57e9c96
to do that is UnzipArchiveToHaikuImage. Cf. UserBuildConfig.sample for
a usage example.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@22173 a95241bf-73f2-0310-859d-f6bbb57e9c96
for three different levels (from "Very Easy" to "Hard"). Have fun!
* Feel free to do a nicer icon!
* Stack.h is actually verbatim copy of a kernel header which we might want
to move to a more public place (like shared).
* ProgressWindow is taken from ShowImage, but adapted to suit different
needs.
* It seems to trigger a bug in the interface kit or app_server: when moving
the mouse around, the right border of a field is sometimes lost. This
does not happen in BeOS, and there is actually no code that looks responsible
for this - it might be an off by one error in the region code, though?
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@22056 a95241bf-73f2-0310-859d-f6bbb57e9c96
It is loaded on boot, and the SCSI bus manager tries to scan its bus which
of course fails at the moment. Hope that helps :-)
* Moved the driver to its new location; it's a SCSI bus controller, so it
should be placed in busses/scsi.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@22048 a95241bf-73f2-0310-859d-f6bbb57e9c96
- module name didn't have the "/device_v1" suffix (which is used to
differentiate device modules, as they can be everywhere in the path).
- ahci_get_supported_paths() now tells the device manager that it
exports a PCI disk device.
* Moved ahci out of the "scsi" sub-directory.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@22041 a95241bf-73f2-0310-859d-f6bbb57e9c96
* boots Haiku successfully on 2 different test boxes here
* no longer screws up when trying to write to PCI config space :)
* Supports nVidia nForce chipsets
TODO:
* Make 4 channel SATA controllers work (currently only recognizes first 2)
* SATA PHY initialisation (needed for some BIOSes who might not do it)
Feel free to test this, and assign any problems with this driver to me.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@21949 a95241bf-73f2-0310-859d-f6bbb57e9c96
work on arbitrary "containers". The image rules are just
specializations.
* Added rules, a definition file (build/jam/NetBootArchive), and a shell
script for creating a gzipped tar archive containing kernel and modules
required for network booting (the contents may need some fine-tuning).
ATM it can be built via the haiku-netboot-archive pseudo target. It is
generated in the output directory (e.g. "generated").
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@21591 a95241bf-73f2-0310-859d-f6bbb57e9c96
To log in, user is "baron" (if you haven't overridden the $USER environment variable),
and the password is empty (ie. just press return).
Note, the password is currently hardcoded into src/system/libroot/posix/pwd.c.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@21561 a95241bf-73f2-0310-859d-f6bbb57e9c96
Gerald.
* Added Gerald Zajac and Jan Kloetzke to the list of contributors.
* Added the s3savage driver and accelerant to the image.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@21478 a95241bf-73f2-0310-859d-f6bbb57e9c96
/boot/beos/apps, but a folder containing links to _selected_
apps in that folder
* a new entry "Desktop Applets" has been added, which contains
all the apps that you either do or do not start at system boot,
but don't need frequent access to
* some apps have been hidden:
- ShowImage and Expander are usually not
directly started on their own, but through double clicking documents
- AboutSystem is invoked elsewhere from the Leaf menu, so it doesn't need
to clutter the Applications menu
* we almost introduced a third category for rarely used apps, but in the
end it would only have contained Installer, Icon-O-Matic and Diskprobe,
and we felt that it is ok to leave these in the Applications menu, as long
as their number is small
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@21374 a95241bf-73f2-0310-859d-f6bbb57e9c96
manually because of some not-yet-fixed deficiencies in the disk device manager.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@21205 a95241bf-73f2-0310-859d-f6bbb57e9c96
libroot). It's available in the kernel through the private
get_haiku_revision() and added to the kernel syslog output.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@21173 a95241bf-73f2-0310-859d-f6bbb57e9c96
also renamed their accelerants and settings files accordingly.
* Added Mandelbrot and GLDirectMode as demo applications.
* Moved CortexAddOnHost to /bin.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@21010 a95241bf-73f2-0310-859d-f6bbb57e9c96
the image.
* Moved "nc" to the alphabetically ordered position.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@20656 a95241bf-73f2-0310-859d-f6bbb57e9c96
with image files. E.g.
jam -q update-image libbe.so kernel_x86
will only build libbe.so and the kernel (if necessary) and copy them
onto the already existing Haiku image. The MIME DB will not be
reinstalled, and only those source directories will be copied for which
the AddSourceDirectoryToHaikuImage rule is given a second argument
(e.g. "1"). The image will otherwise remain unchanged.
The "update-vmware-image" and "update-install" work similarly for the
VMWare image and the directory installation respectively. Note that, due
to the way the VMWare image is created (prepending a header to the
standard image), the file itself is fully rebuilt, i.e. changes made
during the emulation will be lost after updating the VMWare image.
The feature requires Haiku's jam. With other jam versions a similar
effect can be reached by accordingly setting the HAIKU_IMAGE_UPDATE_ONLY
and HAIKU_INCLUDE_IN_IMAGE in the UserBuildConfig file.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@20602 a95241bf-73f2-0310-859d-f6bbb57e9c96
Integration patch from kaliber as of bug #1127, with a minor fix. Thanks!
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@20438 a95241bf-73f2-0310-859d-f6bbb57e9c96
* Added rule AddSourceDirectoryToHaikuImage to copy source directories
onto the image. They will be placed in /boot/home/HaikuSource/...
according to their relative path. This should make it a bit more
comfortable to use gdb as a source level debugger. Alas, the
directories have to be made known to gdb individually (with the
"directory" command). I guess we should update to 6.6...
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@20415 a95241bf-73f2-0310-859d-f6bbb57e9c96
* The settings are still saved in "config/settings/BeMail Settings", though.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@20389 a95241bf-73f2-0310-859d-f6bbb57e9c96
containing the Haiku SVN revision number which is used by uname(). The
value is 0 when built, but updated by the build system before copying
libroot to the image (new rule CopySetHaikuRevision).
* For AboutHaiku we no longer write the SVN revision number into a
resource. Instead we use the uname() info.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@20082 a95241bf-73f2-0310-859d-f6bbb57e9c96
vmdkheader tool. New pseudo target haiku-vmware-image to build it.
Image default name is "haiku.vmdk", adjustable via the
HAIKU_VMWARE_IMAGE_NAME variable.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@19982 a95241bf-73f2-0310-859d-f6bbb57e9c96
without any argument specifier, and a(void); != a(); in C.
* Added the VMware graphics driver to the image.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@19795 a95241bf-73f2-0310-859d-f6bbb57e9c96
to make lots of problems (like spawning threads from an interrupt handler...).
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@19693 a95241bf-73f2-0310-859d-f6bbb57e9c96
caused by the TCP implementation (it doesn't support urgent data yet!).
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@19513 a95241bf-73f2-0310-859d-f6bbb57e9c96
moved acpi_ns_dump driver into acpi bus manager (also removed from the hd image)
the exported fs path is now acpi/namespace
added some methods to ACPI bus and device new interfaces
ACPI nodes like _TZ_ or _SB_ aren't exposed as devices anymore
added a type to the acpi_device_info structure
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@19356 a95241bf-73f2-0310-859d-f6bbb57e9c96
someone will make it a bit more interesting, otherwise it'll get pruned
from the image...
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@19131 a95241bf-73f2-0310-859d-f6bbb57e9c96
networking stack according to some settings file. Doesn't do anything beyond
that yet, though.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@19082 a95241bf-73f2-0310-859d-f6bbb57e9c96
The printer transport add-ons and drivers are missing yet, though.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@19023 a95241bf-73f2-0310-859d-f6bbb57e9c96
* Also added libbnetapi.so and libnetapi.so to the R5 compatibility evaluation score.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@19016 a95241bf-73f2-0310-859d-f6bbb57e9c96
* Added a link from libbnetapi.so to libnetapi.so. We might think about moving
libnetapi.so into libnetwork.so as well.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@19014 a95241bf-73f2-0310-859d-f6bbb57e9c96
* Fixed R5 socket definitions to match their actual definitions.
* libnetwork.so now detects at runtime wether or not R5 compatibility should be
enabled or not.
* All socket functions should now be R5 net_server compatible.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@19012 a95241bf-73f2-0310-859d-f6bbb57e9c96
replacing files when merging when you don't have deleted them manually (for some reason,
it only works as part of the merge operation, and we didn't copy the whole tree to
have "a fresh start" - next time we know better, at least if SVN still suffers from
that same limitation).
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@18456 a95241bf-73f2-0310-859d-f6bbb57e9c96
(Yes, this means QEMU network hw now has an Haiku driver!)
PS: Will cleanup code, looks like real Be Sample Code currently :)
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@18008 a95241bf-73f2-0310-859d-f6bbb57e9c96
to the new stack.
It seems I removed sysctl() a bit too early, as this effectively turns off our current
immature networking stack - sorry, but it wasn't that useful, anyway. Feel free to
send me your complaints :-)
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@17971 a95241bf-73f2-0310-859d-f6bbb57e9c96
why I didn't notice before). Will need to be ported over to the new stack API once it's there.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@17967 a95241bf-73f2-0310-859d-f6bbb57e9c96
for putting on your Desktop as background (manual placement!)
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@17633 a95241bf-73f2-0310-859d-f6bbb57e9c96
like any other.
* Added ProcessController to the image.
* Have BeUnited made any changes to the sources besides putting "copyright beunited"
everywhere? If so, we could just remove them to reduce the clutter. If anyone
knows, please tell.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@17595 a95241bf-73f2-0310-859d-f6bbb57e9c96
* Mesa doesn't compile yet, as some PPC specific stuff seems to be
missing, Philippe?
* Cortex and some other stuff has been marked x86-only, although
it's more of a "GCC 2.95.3"-only.
* I'm not sure if it's a bug in GCC 4, or if that's what the C
standard demands, but sizeof(some_type::some_field) is not
valid anymore :-/
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@17515 a95241bf-73f2-0310-859d-f6bbb57e9c96
Include avcodec plugin, and ac3 (GPL, see above) plugin.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@17404 a95241bf-73f2-0310-859d-f6bbb57e9c96
* Made the graphics drivers/accelerants x86 only, as requested by Rudolf.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@17298 a95241bf-73f2-0310-859d-f6bbb57e9c96
to live with the default settings (which hopefully have *two* arrows per side, though,
won't they, Stephan? :-))
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@17199 a95241bf-73f2-0310-859d-f6bbb57e9c96
Unfortunately, Tracker resolves the link, and doesn't pick up its name or shortcut
(should be fixed in Tracker, though).
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@16806 a95241bf-73f2-0310-859d-f6bbb57e9c96
audio/multi changed to audio/hmulti (avoid confusion with Be's audio/multi)
hmultiaudio.addon won't load ich_ac97 any more (reason is it's not compatible)
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@16782 a95241bf-73f2-0310-859d-f6bbb57e9c96
* Fixed building "stdbins that need libbe.so" for R5/Dano target.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@16313 a95241bf-73f2-0310-859d-f6bbb57e9c96
* Removed Canna input method; this should go in the UserBuildConfig if you need
it (especially because Deskbar replicans currently look broken)
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@16286 a95241bf-73f2-0310-859d-f6bbb57e9c96
from FreeBSD). At the moment it only recognizes Apple's Intrepid
Mac I/O Controller.
Not sure how well it works yet. Enabling all I/O interrupts
definitely triggers one, but I don't seem to get rid of it
afterwards.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@16270 a95241bf-73f2-0310-859d-f6bbb57e9c96
need MiniTerminal, it's no longer included in the image.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@15822 a95241bf-73f2-0310-859d-f6bbb57e9c96
Contains (emtpy) modules for Intel/AMD/VIA models.
Might be separated later, though, depending on how large they will get.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@15522 a95241bf-73f2-0310-859d-f6bbb57e9c96
* added home/config/be folder, and added symlinks to /boot/beos/apps and
/boot/beos/preferences to it.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@15175 a95241bf-73f2-0310-859d-f6bbb57e9c96
we use the libstdc++ (including it's headers) that comes with the
compiler.
* Apparently option "-I-" has been deprecated, which is why we now treat the
include stuff a bit differently.
* Removed avcodec from the Haiku image, since the library wouldn't build with
gcc 4, and I'm not in the mood to fix that (declaration of an array of an
incomplete type).
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@14876 a95241bf-73f2-0310-859d-f6bbb57e9c96
Ordered commands alphabetically to make it easier to find something in that list.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@14747 a95241bf-73f2-0310-859d-f6bbb57e9c96