CreateThreadEvent::DoDPC() missed a reference release to balance the
acquired reference before queuing the DPC, resulting in the
CreateThreadEvent objects being leaked.
This also removes the destructor that tried to cancel the DPC. Since
the class is reference counted and only destroyed when the DPC has
run and released the last reference, this didn't make much sense.
The signal to the team/thread is only actually sent in a deferred
procedure. To ensure that the team/thread stays valid between the DPC
being queued and it actually running, we need to acquire a reference.
Fixes#11390, where the DPC was run after the team was already
destroyed.
This isn't really a bus_manager yet, but just minimal support so
we can get rid of hardcoded ARM SoC support from the core kernel
code.
Needs lots of work, like proper handling of #address-cells and
the like. Also, generic attribute handling, device_manager
integration, and I could go on for hours ;)
* Partly reverting hrev47655, as the moved declarations are expected
by many ports to be accessable via string.h.
Following standards is a good thing in general, but not if it causes
more problems than it helps ...
* VMArea::AddWaiterIfWired(): Replace the ignoreRange argument by a
flags argument and introduce (currently only) flag
IGNORE_WRITE_WIRED_RANGES. If specified, ranges wired for writing
are ignored. Ignoring just a single specified range doesn't cut it
in vm_soft_fault(), and there aren't any other users of that feature.
* vm_soft_fault(): When having to unmap a page of a lower cache, this
page cannot be wired for writing. So we can safely ignore all
writed-wired ranges, instead of just our own. We even have to do that
in case there's another thread that concurrently tries to write-wire
the same page, since otherwise we'd deadlock waiting for each other.
The thread that is being [un]scheduled already has its time_lock locked
in {stop|continue}_cpu_timers(). When updating the TeamTimeUserTimer,
the team is asked for its cpu time. Team::CPUTime() then iterates the
threads of the team and locks the time_lock of the thread again.
This workaround passes a possibly locked thread through the relevant
functions so Team::CPUTime() can decide whether or not a thread it
iterates needs to be locked or not.
This works around #11032 and its duplicates #11314 and #11344.
when uninitializing a partition or a disk (removing the partition
table), check that all partitions from that table are unmounted, as they
are about to become invalid.
Fixes#8827.
The language and formatting conventions can now only be set when
creating the objects. This removed the needs for locking them when
formatting to avoid some other thread changing the format while it's
being used.
Adjust tests and DeskBar TimeView to the API changes.
Although done with the best intentions, the usage of #warning in the
ARM build makes it hard to see what's going on, or see any "real"
warnings.
Remove at least this particularly often triggered one, so we can
have a relatively "quiet" build again...
* Added VFS helper function check_access_permissions() that combines
several partially correct versions to the one true version (tm).
* All but BFS (since recently) missed the S_IXOTH for root on directories,
and all but packagefs missed proper group handling.
The BOOT_GDT_SEGMENT_COUNT was based on USER_DATA_SEGMENT on both
x86 and x86_64. However, on x86_64 the order of the segments is
different, leading to a too small gBootGDT array. Move the define to
the arch specific headers so they can be setup correctly in either case.
Also add a STATIC_ASSERT() to check that the descriptors fit into the
array.
Pointed out by CID 1210898.
There were 3 setting files, each an archived BMessage. Now there is only
one with all the data inside.
* Rework the SettingsPane class to save and load settings from a
message, rather than having each panel pick a file path on its own
* Move saving the app filters to the preference app, rather than the
server (so it's done at the same place as other settings)
* Rework loading prefs in the server so the settings message is read
from the file once and all settings are loaded from it.
This turns out to be more changes than I anticipated.
Fixes#9424.
* Since DNS are normally restricted to ASCII, the use of UTF-8 in domain
names is implemented using a "punycode" encoding.
* The request to the DNS server must be sent with the ASCII
representation of the domain name, however the Unicode one should be
used for user-visible parts.
* ICU provides an implementation of the conversion, which we use here.
* Conversion is currently done in-place and modifies the BUrl object
(this is similar to UrlEncode/UrlDecode).
* Adjust existing IDN test to make use of these methods. It's passing
now.
* We archive views using "managed" archives, and the children are not
attached in the BView(BMessage*) constructor, but later. So it's not
possible to find the target and scrollbars in the constructor of
BScrollView.
* Make BScrollView override AllUnarchived and find the target and
scrollbars again there. The code is slightly different as there is no
guarantee that the first child will be the target in that case. The
existing code in the constructor is preserved for non-managed archives.
* Instead of parsing the pattern everytime Format() is called, parse it
only once when the object is created.
* Adjust all callers to make use of the feature and reuse the instance
as much as possible. This also allows calling B_TRANSLATE only once
instead of everytime the formatting needs to be done. We use either a
static instance (when the message pattern is constant) or a field (when
it is not known to be constant).
* Since the BMessageFormat instances are now reused, add locking to
avoid race conditions (ICU itself is thread safe, but the format pattern
is recreated when the locale is changed)
This can be used to format complex messages properly. It moves the
complexity of handling plural forms, gender, and anything else needed
into the localizable string, rather than hardcoding it in the code.
This moves the difficulty of handling these things properly to people
doing translations, rather than relying on developers to do it.
Fixes#10755, but our localization must now be updated to make use of
the feature.
* ... and adjust all callers
* Remove NumberFormatImpl: we rely on ICU to provide this and it can be
fully wrapped into the C++ file. The class was a stub anyway.
* "Monetary" format is included in NumberFormat for now. There may be a
more generic solution to handle monetary and BTimeUnitFormat (and other
arbitrary units)
* Harmonize API for all B*Format to take an output BString by reference
as the first parameter,
* Move the FormatTime methods from BLocale to BTimeFormat
* Adjust all callers for BTimeFormat, BTimeUnitFormat and
BDurationFormat.
* Move relevant parts up into BFormat so other format classes can use
those
* Adjust BDurationFormat and BTimeUnitFormat for the changes
* Remove the "default" date format, it is better to keep only a default
locale and let applications create B*Formats from it as needed.
* Creating a B*Format without arguments to the constructor now
configures it for the default locale, which allows for easy use in
standard cases (formatting something with the current language and
format)
* Creating a B*Format is potentially an expansive operation, it is
advised to keep the instance around and reuse it whenever possible.
However it must be "refreshed" when the locale changes, for apps which
supports that, since it keeps a copy of the language and formatting
convention, rather than a pointer to the locale as it did before.
* MarkAsInvalid is used to enable or disable the mark
* The B_INVALID BControlLook flag is used
* invalid BTextControls are drawn with a red border.
* You ar encouraged to let the user know more precisely what's wrong, by
showing an helpful error message next to the control or in a tooltip.
* BDate setters don't perform any validation, use with caution.
* BCalendarView setters do perform validation checks, and will adjust
the day so it fits the requested month or year.
* Add tests for the BCalendarView setters.
* Add setters for the language and formatting conventions
* Add shortcut getter and setter for the date format
* Use those in the locale roster to make the BDateFormat actually use
the system preferred language and format.
* Applications can also use this to extract specific information from
the system format (eg. set date format to "LLLL" to extract month
names), or define specific formats more easily (eg. for parsing and
generating e-mail headers or HTTP cookies).
* Use a reference rather than a pointer for the output string, removing
the need for NULL checks (which were missing, anyway)
* Adjust callers to that change
* Add new Format variant taking a BDate argument
