CFE is used in the upcoming Amiga X-1000 dualcore PPC board.
* Largely inspired by the OF and U-Boot code.
* Still largely stubbed out.
* The loader builds but I don't have a machine to test it. Anyone interested?
* Subclass ConsoleNode as VTConsole
* use it to implement SerialConsole
* Use it as the default console for now to simplify debugging.
VTConsole could probably be factored out into boot/platform/generic/ someday.
* Also reset the local and IO APIC base physical addresses when configuration
failed.
Should fix#8102, but is otherwise untested for lack of old enough hardware.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@43217 a95241bf-73f2-0310-859d-f6bbb57e9c96
to a panic at boot.
* Make the panic message more explicit when there is no more room left.
This should hopefully fix#7869.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@42715 a95241bf-73f2-0310-859d-f6bbb57e9c96
* Rename of_support.h/cpp back to support.cpp as per Axel
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@42498 a95241bf-73f2-0310-859d-f6bbb57e9c96
* Rename a few variables to make more sense
* OF_FAILED is a signed int.. fix return of of_address_cells
* OF_FAILED is a signed int.. fix return of of_size_cells
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@42497 a95241bf-73f2-0310-859d-f6bbb57e9c96
* Add header file to support of_support.cpp
* Add support functions to obtain address and size cell lengths
* Small style cleanups
* Add support for G5 PowerPC cpus...
* Refactor memory region code to be aware of 64-bit OF addresses.
As-is the boot loader wouldn't start on G5 systems because
OpenFirmware memory base addresses are stored as two 32-bit
unsigned int 'cells' vs one 32-bit unsigned int 'cell' on G3/G4.
I removed the static struct and replaced it with a template
and pass uint32 or uint64 depending on the address cell size.
Thanks for the idea DeadYak!
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@42486 a95241bf-73f2-0310-859d-f6bbb57e9c96
* Style fixes as per Axel
* Reintroduce removed OF_FAIL checks
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@42460 a95241bf-73f2-0310-859d-f6bbb57e9c96
* Detect OpenBIOS used in QEMU and set machine flag
(OpenBIOS isn't 1:1 Apple OpenFirmware)
* Show at boot which machine type is detected
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@42459 a95241bf-73f2-0310-859d-f6bbb57e9c96
* Clean up messge and error text
* Begin use B_PRI* macros
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@42449 a95241bf-73f2-0310-859d-f6bbb57e9c96
APIC enumeration. As the local APIC is the basis for inter-CPU communication, we
can't do SMP when it's absent.
Fixes#7692, but indeed it makes no real sense for QEMU to provide the APIC info
in the MP and ACPI tables (and actually emulate the hardware) when it disables
the APIC support flag at the same time.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@42215 a95241bf-73f2-0310-859d-f6bbb57e9c96
its size.
* Added "Display current boot loader log" item to the "Debug Options" boot
loader menu. It displays what the boot loader has logged so far. Might be
interesting for early boot issues when serial debugging is not possible.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@42134 a95241bf-73f2-0310-859d-f6bbb57e9c96
* If we detect ACPI 2.0 or higher, the spec says we should use the XSDT rather
than the RSDT. Attempt to do so, falling back to the RSDT if the former fails
to be mapped/validated.
* Refactored acpi_find_table into a templated version to account for the fact
that the XSDT exports different pointer widths for its links to other tables
than the RSDT.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@42133 a95241bf-73f2-0310-859d-f6bbb57e9c96
trunk. The interesting part of r42122 was already fixed in the trunk, though.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@42124 a95241bf-73f2-0310-859d-f6bbb57e9c96
actually misleading, since it specifies the length of the xsdt rather than the rsdt. Furthermore, it is only available if the BIOS reports ACPI version 2.0 or greater. Since we don't currently support the XSDT, we can't rely on that field and have to resort to the previous approach of mapping the RSDT header in order to determine the length of the RSDT itself.
Also add validation of the RSDT's checksum so we don't get tripped up by BIOS's with broken tables.
Should fix boot problems that were introduced by r42105.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@42118 a95241bf-73f2-0310-859d-f6bbb57e9c96
so map the whole table without freeing and remapping later
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@42105 a95241bf-73f2-0310-859d-f6bbb57e9c96
exceptions (page faults and the like). The handler dumps possibly interesting
information (registers, a (numerical) stack trace) to the serial output, and,
if possible, also to the screen. That should help debugging boot loader
crashes.
* For the IDT the boot loader sets up for the kernel the descriptors are set up
the same way, so until the kernel initializes the IDT itself (arch_init()) the
facility is still in place and can thus catch very early kernel boot crashes.
Unfortunately the on-screen output doesn't seem to work anymore at that point,
so the output only goes to the serial port...
* ... and to the debug syslog -- dprintf() does now append it there after
debug_cleanup() has been called. Seems to work fine in qemu, but when I tested
it on real hardware the debug syslog was gone.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@42092 a95241bf-73f2-0310-859d-f6bbb57e9c96
regression), since the tables are bigger than that.
Accessing unmapped memory was doing bad things on
XenServer.
Fixes ticket #7497.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@42068 a95241bf-73f2-0310-859d-f6bbb57e9c96
menu item it's associated with rather than an input string. This allows it
to calculate the position to start the input at, as well as the correct
line to place it on. The previous solution always put the input at the
center line, which happened to be the right place by happy coincidence
unless one also had the menu items for viewing/saving the debug syslog
present.
* Implement input buffer scrolling, and consequently lift the previous size
limit on user input (it is now only limited by the size of the passed in
buffer).
* Implement parsing of the input buffer to allow it to handle comma-separated
options. Thus, one can now input things like "disable_smp true, serial_debug_output false"
and it will be handled properly.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@41706 a95241bf-73f2-0310-859d-f6bbb57e9c96
generator). There are chipsets (namely ATI/AMD SBx00) where mode 2 doesn't seem
to work (the counter isn't reloaded after the countdown has completed). Mode 0
has the same resolution as mode 2 and, as interrupts are disabled at this point
in booting, is otherwise equivalent as well. I've tested this on 5 machines
available to me and it doesn't seem to have any negative effect.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@41683 a95241bf-73f2-0310-859d-f6bbb57e9c96
With that we will usually start right away without having to wait for the
timer to be in the desired state, which removes roughly 116ms of spinning
around for a normal calibration run.
* Read back the value once after programming. The delay this introduces
accounts for the fact that the counter will only start counting down on the
next clock cycle.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@41680 a95241bf-73f2-0310-859d-f6bbb57e9c96
bound to prevent spinning forever if we have a very unstable TSC that we
simply can't calibrate. Shouldn't really happen though.
* Set the gate low for channel 2 on exit if we used it as the counter.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@41678 a95241bf-73f2-0310-859d-f6bbb57e9c96
copies of it with a call to that.
* Make the variable names more readable and spacing cleanup.
No functional change intended.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@41670 a95241bf-73f2-0310-859d-f6bbb57e9c96
timer code has such definitions too, but they're not quite as verbose. Will
eventually make the latter use these too.
* Prepare for possibly using other PIT channels for the calibration. Right now
everything's the same still.
* Add disabled print of the resulting factors.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@41669 a95241bf-73f2-0310-859d-f6bbb57e9c96
