- Adds IPv6 fragmentation support and some partial work to enable configuration of IPv6 in net_server. Not currently in the build.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@41291 a95241bf-73f2-0310-859d-f6bbb57e9c96
* Changed the session module to create an extra session for existing audio
tracks.
* Let cdda also recognize "audio partitions" as published by the session module.
* If there is only a single session, the session module now gives file system
drivers the chance to play with the device directly.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@41288 a95241bf-73f2-0310-859d-f6bbb57e9c96
* when removing a transfer, if this was the only one in the list, we set fLastIsochronousTransfer to NULL.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@41286 a95241bf-73f2-0310-859d-f6bbb57e9c96
we now request the last address we got from DHCP server, and only on failure
we fallback on the whole INIT state (discover, collect offer, etc).
This should fix people losing their IP address at each renewal, or far worse,
after the link goes up again.
Closed#7346.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@41285 a95241bf-73f2-0310-859d-f6bbb57e9c96
* Use uint64 instead of off_t for the frame numbers.
* Shuffled Volume methods around to match the declaration order.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@41282 a95241bf-73f2-0310-859d-f6bbb57e9c96
Before, DHCP will still run after a link down & up event, which could
leads to break the user-defined static configuration.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@41277 a95241bf-73f2-0310-859d-f6bbb57e9c96
Before, the "interfaces" settings file creation/removal notification was
leading to a attempt to configure/remove an interface named
"/boot/common/settings/network/interfaces"!
Could help fixing issue #7475.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@41274 a95241bf-73f2-0310-859d-f6bbb57e9c96
bfs_fuse act as a mount helper. This closes ticket #7433. Thanks a lot!
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@41258 a95241bf-73f2-0310-859d-f6bbb57e9c96
updated several firmwares for iprowifi4965 and iprowifi3945. Tested on iprowifi4965 only.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@41240 a95241bf-73f2-0310-859d-f6bbb57e9c96
a multi-document application. This is already more useful than
before, but will be even more useful once it is possible to copy
more types of objects to the system clipboard and paste them into
other open icons.
* Fixed wrong snapping menu item being marked when restoring settings
that enable a different snapping mode from the default.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@41212 a95241bf-73f2-0310-859d-f6bbb57e9c96
icon scale is larger than the maximum visibility scale of
4.0f. This just means you cannot prevent shapes from
rendering in icons rendered larger than 256x256.
visibility scale is 4.0
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@41206 a95241bf-73f2-0310-859d-f6bbb57e9c96
to get the main menu bar to report the correct minimum size. My
previous commit with regards to setting the correct minimum window
size introduced a regression that the window could not shrink below
it's initial size because of some backwards compatibility behavior
of BMenuBar (IIRC).
* Inserted a content view to hold the tool bar and the show image
views. This one does not use layout management, so that everything
pretty much works as before.
* Showing/Hiding the tool bar is now animated.
* When the tool bar is enabled in principle, it will automatically
show in full screen mode when the user moves the mouse. When the
mouse is not above the tool bar, it is hidden after a delay.
* Added a right-aligned "Leave full screen" icon to the tool bar.
* Improved the workings of the slide show icon. As before, it automatically
triggers full screen mode. It is now pressed when the slide show is
running. Clicking it again just stops the slide show without affecting
the full screen mode (i.e. also not when the user left full screen mode
meanwhile).
There are some problems with images not being automatically sized to
the full screen size as would be expected. This needs to be fixed, yet.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@41202 a95241bf-73f2-0310-859d-f6bbb57e9c96
will stretch the icons across the available space. However,
it's possible to still add items afterwards, which makes those
items right-aligned.
* Added SetActionVisible() to show or hide icons.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@41200 a95241bf-73f2-0310-859d-f6bbb57e9c96
* added _ProbeCommitFormat() and _SelectBestAlternate()
* to be noticed: BUSBInterface::SetAlternate() isn't const and there is no mean to get a non-const BUSBInterface.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@41196 a95241bf-73f2-0310-859d-f6bbb57e9c96
* added SuggestVideoFrame() so that this can be overriden.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@41195 a95241bf-73f2-0310-859d-f6bbb57e9c96
simple click or becomes a tap drag. ALPS does not send these events.
- Enable ALPS.
- Force const edge motion speed. Synaptics sends events with a certain frequency ALPS don't. Even worse ALPS stops sending events durring a edge motion when you don't move your finger. Current
speed is 200 pixel/s. In theory synaptics has different event frequency modes which would result in a different edge motion speed in the previous approach. Please check if synaptics works/speed is correct. Will try to get a synaptics laptop for testing...
- fix class variable names.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@41190 a95241bf-73f2-0310-859d-f6bbb57e9c96
I suppose it was discussed on the i18n list as mentioned in that
commit. However two things, Humdinger: 1) You did not test your commit,
and 2) You did incomplete cleanup. If you had removed the member variable
from the StyledEditWindow header, you would have gotten at least a
compile error. Those things being said, I did not test my changes
either... :-)
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@41187 a95241bf-73f2-0310-859d-f6bbb57e9c96
* When exporting for the first time, use the native saver's file
name to initialize the file panel save text.
* Don't shadow exportMode variable.
* Small cleanups.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@41181 a95241bf-73f2-0310-859d-f6bbb57e9c96
* Do not implement backbuffering. Besides being inefficient on Haiku it solves
the grey area on start up.
* Reimplement scrolling and layouting the canvas. The mouse cursor is now the
anchor when scrolling with the mouse wheel.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@41180 a95241bf-73f2-0310-859d-f6bbb57e9c96
* Make validating the scroll offset in SetDataRect() optional.
* Introduced SetDataRectAndScrollOffset() to set both atomically.
This avoids some unwanted feedback when having to set them
both anyway, but hook methods are called and re-enter back into
the client code.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@41179 a95241bf-73f2-0310-859d-f6bbb57e9c96
the application to set the file panel save text to the previous
ref name.
* Wait for the export thread to finish writing the file before
trying to set the icon attribute. Usually it never worked when
saving a file for the first time, since the file did not yet
exist.
* Report errors to std::err.
* Code style cleanup.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@41178 a95241bf-73f2-0310-859d-f6bbb57e9c96
* add SetRawString() to both implementations of DefaultCatalog which sets
the translated string as given
* use SetRawString() in both (standard- and build-)versions of linkcatkeys
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@41167 a95241bf-73f2-0310-859d-f6bbb57e9c96
* Renamed _UpdateUI() to _UpdateDate().
* Added copyright year when Karsten wrote that code.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@41156 a95241bf-73f2-0310-859d-f6bbb57e9c96
February only has 28 to 29 days, so setting the current day may fail).
* This caused bug #7421.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@41155 a95241bf-73f2-0310-859d-f6bbb57e9c96
which triggers MainWindow::ObjectChanged() and locked the window, this could
happen at a time where the application already has the MainWindow locked in _Open(),
and tries to execute fDocument->MakeEmpty(), which in turn waits for the export
thread to finish.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@41152 a95241bf-73f2-0310-859d-f6bbb57e9c96
left side of the interface below the menu bars
minimum width. Resolves cut off strings with
localization.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@41149 a95241bf-73f2-0310-859d-f6bbb57e9c96
makes it abort earlier when no firmware files are available. Note that this
worked some time ago and seems to be an edge case triggering an issue in the
slab allocator. Freeing the buffer (possibly allocated with an invalid size)
in the error case triggered the assert in #6679. That should probably be looked
at, but meanwhile this should close#6679.
Note also that looking for firmware is deliberatly done only at open() time,
since the configured operational mode determines the firmware to be used and
having the firmware loaded later makes the mode easily changeable at runtime.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@41144 a95241bf-73f2-0310-859d-f6bbb57e9c96
ALPS movements are fine now, hope the synaptics is still working. Please test! There are still some leftovers form switching from a c struct to a c++
class will fix that later.
- Support ALPS devices with passthrough.
- ALPS is still disabled because tap and edge motion is not working yet. The
problem is that synaptics generates more helper events which makes this a lot
easier to implement. My plan is to emulate this events to imitate the synatics touchpad.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@41140 a95241bf-73f2-0310-859d-f6bbb57e9c96
* Disallow renaming of entries with localized names for now - this is meant to be temporary - and so far only in Tracker's Info window. Renames do not result in a change, visually, as the localized name hides the real name, and results in a bad user experience. One could possibly allow renames of the localized name, writing it back to the catalog. I've experimented with using BCatalogAddOn::SetString() but haven't been able to make it stick yet.
* Disallow renaming Trash in Tracker's Info window via Command-E.
* Adjust the argument order of BLocaleRoster::GetLocalizedFileName().
* Add a BLocaleRoster::GetLocalizedFileName() variant to look up another app's name given its signature and unlocalized, canonical name.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@41126 a95241bf-73f2-0310-859d-f6bbb57e9c96
more or less a copy of the synaptics driver. Next step is to refactor the movement generation and share the
code with the synaptics driver.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@41124 a95241bf-73f2-0310-859d-f6bbb57e9c96
unload a driver. This was causing bug #4608 depending on the order of events;
now you should have less worries removing your USB device before having it
unmounted.
* Added a "legacy_device" KDL command.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@41119 a95241bf-73f2-0310-859d-f6bbb57e9c96
a problem on the Mac which obviously messed up its BIOS.
* This busy loops, but CPU utilization should be a maxed out in the boot loader
anyway - we could add a pause, though.
* This closes bug #2654.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@41117 a95241bf-73f2-0310-859d-f6bbb57e9c96
Fix header order, ups never changed a libbe file before ;) thx Oliver. Add small optimization as pointed out by Ingo.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@41093 a95241bf-73f2-0310-859d-f6bbb57e9c96
* ntfs log handler wasn't included for Haiku, it should be used to set up a log handler.
* style fix
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@41081 a95241bf-73f2-0310-859d-f6bbb57e9c96
print from this window's looper.
There is two majors bugs raised by the test page feature, which sports both
gradiants and vector drawing (leaf, gradiant colors):
- radiants are not recorded/handled in BPicture
color gradiants presents in the test page
- scale is not correctly recorded or handled in BPicture, as seen when zooming on
the leaf drawing in Preview window...
I will investigate how to fix both.
Anyway, an incomplete test page is better than none.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@41067 a95241bf-73f2-0310-859d-f6bbb57e9c96
* When saving, the internal bitmap wasn't detached from stream, which then
deleted it, paving the road to a crash at next bitmap access.
* When saved, notify PictureView that current and original pictures are
the same.
Also, add support for bitmap paste (needs more improvement) and
to avoid reloading picture on B_STAT_CHANGED after our own save operation.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@41066 a95241bf-73f2-0310-859d-f6bbb57e9c96
* Removed the full-screen icon, since the zoom icon of the window
already does the job.
* Added an icon for the slide show, but it additionally goes into
full-screen mode.
* Added appropriate work arounds for bugs in the Interface Kit
concerning the hiding of tool-tips, and a bug in the app_server
concerning the invalidation of unhidden views...
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@41065 a95241bf-73f2-0310-859d-f6bbb57e9c96
an appropriate offset when the button is drawn in
pressed look. Fixes the bitmap being drawn with a
much too big offset.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@41056 a95241bf-73f2-0310-859d-f6bbb57e9c96
View menu)
* The previous/next, selection mode, zoom actions and full screen
mode are accessible via tool bar.
* The tool bar can currently not be shown in full screen mode.
Eventually, I want it to work like in MediaPlayer when it is
generally enabled.
* Fixed capitalization "Selection Mode" into "Selection mode"
(needs catalogs update for all languages).
* When leaving selection mode, clear the selection. Especially
with the new tool bar icon, it looked really weird and irritating
when the selection persisted.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@41055 a95241bf-73f2-0310-859d-f6bbb57e9c96
derived classes. This is now used for storing and restoring DataSources
in/from the ActivityView archive. Fixes replicant restoration after
switching the preferred system language.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@41027 a95241bf-73f2-0310-859d-f6bbb57e9c96
the swap file specifically. There is already a TODO in
the code for replacing this mechanism with something
cleaner and more flexible. Resolves ticket #7367.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@41026 a95241bf-73f2-0310-859d-f6bbb57e9c96
marked as read by another client the haiku client at least updates the flags and mark it as read when fetching the body. Thats the way Opera is
doing it.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@41018 a95241bf-73f2-0310-859d-f6bbb57e9c96
product id. Currently the list only has an example entry.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@41017 a95241bf-73f2-0310-859d-f6bbb57e9c96
- context menu of the replicant dragger. Fixes#7363;
- default <empty> menu placeholder. Fixes#7072;
- other messages used in PrintJob, Dragger and ZombieReplicantView classes.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@40991 a95241bf-73f2-0310-859d-f6bbb57e9c96
