* Remove 4.2 sourcecode
* ICU is now an optional package (mandatory)
* Adjust the namespaces and libraries names where needed
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@37498 a95241bf-73f2-0310-859d-f6bbb57e9c96
* copy the needed jam files during compile time. This ensures the correct data
files are used, for example in non-trunk builds
* -f now only removes the generated at runtime listing of available packages
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@37465 a95241bf-73f2-0310-859d-f6bbb57e9c96
I've removed it for now, until someone finds the time to look into it.
* Therefore, enabled all supported devices for the rtl81xx driver.
* Made the rtl81xx driver actually work by adding the missing PHYs - it doesn't
use the same PHYs as the rtl8139 driver. Imported the rgephy.c|h from FreeBSD
8 (not yet in vendor branch, but unchanged).
* It seems to work reliably with Gigabit now, albeit a bit slow, and with too
high CPU load.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@37425 a95241bf-73f2-0310-859d-f6bbb57e9c96
Haiku causes the image file to need 193 MB; building it in FreeBSD requires
only 180 MB.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@37343 a95241bf-73f2-0310-859d-f6bbb57e9c96
This will be utilized by installoptionalpackage, to determine which packages
are already installed in the system and thus should not prevent the
installation of other packages.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@37239 a95241bf-73f2-0310-859d-f6bbb57e9c96
"application/x-vnd.haiku-screenshotapp" to "application/x-vnd.haiku-screenshot"
* Rename "Screenshot" to "screenshot", rename its signature from
"application/x-vnd.haiku-screenshot" to "application/x-vnd.haiku-screenshot-cli"
* Move screenshot from /system/apps to /bin
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@37059 a95241bf-73f2-0310-859d-f6bbb57e9c96
- Remove the options panel, and the "-o, --options" switch, put all options
inside the main panel as discussed in ticket #3831.
- Add a "Copy to clipboard" button, as discussed in ticket #3831.
- Add a "-c, --clipboard" switch to quickly copy a screenshot to the clipboard
without launching the GUI.
- All settings apply directly to the current schreenshot as well as new
Screenshots, as discussed in ticket #4100.
- Separate executables for the CLI (Screenshot) and GUI (ScreenshotApp).
When "Screenshot" is launched it runs in the background, and launches the
GUI (if not run with the -s or -c switch) before quiting itself. When a new
screenshot is requested through the ScreenshotApp GUI interface,
ScreenshotApp launches Screenshot before quiting itself, after which
Screenshot re-launches ScreenshotApp. This fixes ticket #4100.
Note that because of this change the deskbar entry will show "ScreenshotApp"
and not "Screenshot" as might be expected. I am not sure if this is a
problem.
- Fixed the code that determines the active window because it was just finding
the top most window. This change fixes tickets #3112, #4878, and #4423.
- Hide the cursor by calling BApplication::HideCursor().
This fixes ticket #2988 (but *not* #2997).
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@37017 a95241bf-73f2-0310-859d-f6bbb57e9c96
#1245. There are some TODOs outlined in the ticket, but they will be much
easier to review as individual patches against trunk, versus as a new version
of the huge patch.
I've messed a lot with src/servers/notification/NotificationsView.cpp in order
to resolve a crash I was getting when testing this thing (rewrote line
wrapping). I've also replaced the icons with the one that zuMi did long ago.
Thanks, plfiorini, for working on this code as much as you did!
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@36949 a95241bf-73f2-0310-859d-f6bbb57e9c96
* remove superfluous (unused) language files - we now get this information
from ICU
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@36856 a95241bf-73f2-0310-859d-f6bbb57e9c96
control icon into a new post_install script. Tested in QEMU and the items are
persistent also for the volume control.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@36805 a95241bf-73f2-0310-859d-f6bbb57e9c96
prevents a second folder "draft" being created when saving mails in Mail.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@36503 a95241bf-73f2-0310-859d-f6bbb57e9c96
indicates the archive to be usable with either GCC. When utilized, the
packages shared libraries will automatically be symlinked in the alternative
gcc subdir, eg common/lib/gcc4. At the moment, packages that set isCDPackage
are not supported, as Installer needs to be enhanced.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@36456 a95241bf-73f2-0310-859d-f6bbb57e9c96
test for BGradient. Mandelbrot would also be a candidate for removal, but maybe
some people are sentimentally attached to it, since it was an old BeOS demo. :-)
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@36428 a95241bf-73f2-0310-859d-f6bbb57e9c96
* Removed irq_routing struct from ACPI.h to where it is used. Might be able to use acrestype.h instead of duplication.
* Disable old embedded controller and remove it from image.
* Move embedded controller code to busmanager module.
* Remove (some) code duplication
Should work as before, but is now initialized right after the bus manager. Can probably remove further code duplication.
I hope I've done it correctly, feedback is most welcome.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@36420 a95241bf-73f2-0310-859d-f6bbb57e9c96
uses it.
* While I were at it, I removed the ps2mouse driver as well, as well the whole
arch directory (as it is otherwise empty).
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@36261 a95241bf-73f2-0310-859d-f6bbb57e9c96
* addition of common/etc/vimrc
* creation of symlink vi --> vim
Improves but not a final fix for #5699
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@36082 a95241bf-73f2-0310-859d-f6bbb57e9c96
temporary means for joining an unencrypted or WEP encrypted wifi network.
setwep works with 64- and 128-bit WEP and supports both text keys as well as
hex digit keys.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@36057 a95241bf-73f2-0310-859d-f6bbb57e9c96
* build shared and static libraries for libtiff, cleaned libtiff sources
* TIFFTranslator now uses this library
I used 3.8 as library version as it seems the API didn't change since then
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@35857 a95241bf-73f2-0310-859d-f6bbb57e9c96
whether to extract the firmware archive onto Haiku Image or to simply copy
it intact. This allows the ipw2100 and iprowifi2200 firmware archives to be
copied onto the default images. Fixes#5523
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@35738 a95241bf-73f2-0310-859d-f6bbb57e9c96
* Added iprowifi4965 driver to the image.
* Add the firmware for the Wifi drivers that need it to the image.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@35687 a95241bf-73f2-0310-859d-f6bbb57e9c96
* InstallOptionalHaikuImagePackage: Made the first argument an actual file
name, i.e. the extension ".zip" is no longer appended by it.
* Renamed rules UnzipArchiveTo{Container,HaikuImage} to
ExtractArchiveTo{Container,HaikuImage} and generalized them to support
tgz/tar.gz archives (implemented in build_haiku_{image,cd}).
* Removed DownloadOptionalPackage. DownloadFile is used instead.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@35634 a95241bf-73f2-0310-859d-f6bbb57e9c96
* Removed the test driver from the image; it serves no practical purpose.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@35459 a95241bf-73f2-0310-859d-f6bbb57e9c96
could prove to be a major PITA (because of all the dependencies that would need to be rebuilt)
* when adding a library to the image, its optional minor abi version is taken care of, too (i. e. a
corresponding link is created).
* the ABI-related links in /system/lib are now replicated in /boot/develop/lib/<arch>
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@35362 a95241bf-73f2-0310-859d-f6bbb57e9c96
build system
* declared ICU-libs as private system libraries, which causes them to no longer
be available for building software (they no longer are linked from the
development lib folder, so the linker won't find them)
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@35323 a95241bf-73f2-0310-859d-f6bbb57e9c96
One just has to love the write overlay. That one really saved a lot
of work.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@35224 a95241bf-73f2-0310-859d-f6bbb57e9c96
* Moved the "tmp" directory out of /var, and to /boot/common/cache/.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@35104 a95241bf-73f2-0310-859d-f6bbb57e9c96
