- Fixed issues sending data over USB bus (actually write data when
requested to; increased timeout when writing data).
- Added usb_printer to build and Haiku image.
- Sending data to printer over USB bus works now in Haiku (cat ... >
/dev/priner/usb/0). Not sure if it works when printing from an
application as I don't have a driver that supports my printer yet.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@33501 a95241bf-73f2-0310-859d-f6bbb57e9c96
printer drivers expect the existence of this folder (for instance
Philippes Canon bubblejet driver).
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@33500 a95241bf-73f2-0310-859d-f6bbb57e9c96
-Added grist to the sourcecode files sent to collectcatkeys to avoid mixups
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@33401 a95241bf-73f2-0310-859d-f6bbb57e9c96
-Jamrule for collectcatkeys no longer print all the strings, only a message when it can't parse one (happens for TR(variable) basically)
-Added fingerprint check in the plaintext catalog ReadFromFile. However, the adler checksum is different each time the catalog is loaded because it relies on the string being iterated always in the same order, but this is not always the case with an HashMap ! Some rethinking is needed, so disabled the check for now so it does not breaks the build
-Some try to debug the bluetooth preflet localization. Still buggy, but I wanted to commit all this mess before I break everything up again.
-Also sorted the fr.catkeys files to be in the same order as the autogenerated en.catkeys (this is useless but makes them easier to check) and updated their fingerprint even if they are still not checked.
-Miscelaneous style fixes, small bugfixes, more error checking and error messages saying where they come from.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@33322 a95241bf-73f2-0310-859d-f6bbb57e9c96
This is important when setting up the TARGET_LIB* constants later, in case
the target platform is not "haiku". (i.e. libbe_test).
* Added TODO about HOST_GCC_BASE_FLAGS being wrong for GCC4. I couldn't find
the proper fix, but it is important whan compiling libbe_test on Haiku.
I worked around this by having the constant defined correctly for the
problematic file. See the TODO comment.
* Small cleanups.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@33246 a95241bf-73f2-0310-859d-f6bbb57e9c96
* oshaiku.c is based on a different original from a stub, therefore it
looks like a lot of comment changes.
* achaiku.h is redone completely.
* dpc is added as boot module.
* acpi_busman.c now does all mandatory steps to init.
* style fixes
* added another acpi kernel settings to avoid full init for debugging.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@33236 a95241bf-73f2-0310-859d-f6bbb57e9c96
now be inspected. Still work in progress -- bit fields and arrays don't work
correctly yet nor does type lookup beyond the current compilation unit.
* Made most of the debugger output configurable via a config header. By default
it's much less noisy now.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@33217 a95241bf-73f2-0310-859d-f6bbb57e9c96
-MarkForTranslation was not scanned by collectcatkeys, improved the regexp to take it into account
-Some gristing was missing in jamrules, added a bit, still seem to miss some.
-Replaced $(var:B).ext with $(var:S=.ext) as it is the proper way in order not to loose grist and mess things up
-Removed icu include and replaced direct class nesting with pointer to avoid binary compatibility breakage on ICU updates.
-Fixed TimeFormatSettingsView to properly include needed icu things. Should not be there, actually. Needs cleanup.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@33210 a95241bf-73f2-0310-859d-f6bbb57e9c96
repository, not mirroed via git-svn. Calling git-svn on a plain
repository seems to cause it to go haywire.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@33192 a95241bf-73f2-0310-859d-f6bbb57e9c96
work to do, but it's about time to give this code more exposure.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@33176 a95241bf-73f2-0310-859d-f6bbb57e9c96
user and group ids on build platforms that support them. Fixes#4458.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@33066 a95241bf-73f2-0310-859d-f6bbb57e9c96
* update Firefox optional package for r1a1
+alphabranch (will do that next)
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@33019 a95241bf-73f2-0310-859d-f6bbb57e9c96
* fixed precedence problem in jam rule that caused an if to evaluate to true, no matter
if a cd or an image was being built
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@33007 a95241bf-73f2-0310-859d-f6bbb57e9c96
on the target image instead of extracting them, but only if the target image
is a CD image. This then speeds up installing a great lot, at the expense of
certain applications not being available in LiveCD mode. This affects
* the revision control tools and their dependency libraries,
* autotools
* texinfo
* perl and python
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@32996 a95241bf-73f2-0310-859d-f6bbb57e9c96
* Changed the Bootscript and the InstallerFinishScript to only create and
cleanup a link on the Desktop.
* Applied patch by idefix to fix removing the Installer link from volumes
that contain spaces in the name. (Thanks!)
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@32995 a95241bf-73f2-0310-859d-f6bbb57e9c96
- Bugs #4218#4275 are fixed with this version of KeymapSwitcher.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@32984 a95241bf-73f2-0310-859d-f6bbb57e9c96
the previous version (which at least broke BeZilla.) This is part of #4363.
+alphabranch
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@32983 a95241bf-73f2-0310-859d-f6bbb57e9c96
Updated to use all the new alpha1 packages. I have not yet done throughrough
testing myself. I figured that trunk should also use the newest packages.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@32885 a95241bf-73f2-0310-859d-f6bbb57e9c96
- Removed bitmap icons.
- Updated rdef copyrights.
- Added them to the image.
I also tested them.
+alphabranch
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@32799 a95241bf-73f2-0310-859d-f6bbb57e9c96
is obviously already configured not to use patented code.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@32577 a95241bf-73f2-0310-859d-f6bbb57e9c96
testing to determine where we are at sooner than later now.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@32569 a95241bf-73f2-0310-859d-f6bbb57e9c96
image and DevelopmentMin optional package. This is the original libjpeg (6b),
which I will updated to version 7 within the next few days. I need to
understand better the modifications made to it before updating.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@32553 a95241bf-73f2-0310-859d-f6bbb57e9c96
- Move the launching of files in this directory from the Bootscript to the
UserBootscript.
- This means we now ship a working UserBootscript instead of just a sample.
- Updated documentation based on this change and Humdinger's suggestions.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@32544 a95241bf-73f2-0310-859d-f6bbb57e9c96
The dead simple Bash code was just copied from Humdinger's patch on #1202. He
also suggested having a link on the Deskbar for this folder, but I don't know
if that is needed. We just need to document it, which I may do next.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@32527 a95241bf-73f2-0310-859d-f6bbb57e9c96
make it work, one would need to use versioning for all libbe symbols. This is
worth an 8k price per file that links against libbe.so, so I didn't want to
commit this as is. An alternative to this solution would be to write a
separate application that is responsible for the app_server's window. Comments
welcome.
* Removed BeOS compatbility of the libbe_test stuff.
* Renamed the libbe_test targets from *haiku* to *test*, ie. libbe_haiku.so is
now called libbe_test.so, haiku_registrar is now test_registrar, etc.
* This also removes BeOS compatibility from tracker/FSUtils.cpp (all BeOS
compatibility should be removed, but I don't want to make Alexandre more work
in his branch, and it's not urgent at all).
* Replaced the former "run" scripts for the test environment with a single
run script (see updated NOTES file).
* Removed the libbe_test target from some applications - this was only to help
developing them under BeOS, and is thus no longer necessary.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@32521 a95241bf-73f2-0310-859d-f6bbb57e9c96
anymore with the small size, and it didn't fix the problem I originally hoped
it would.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@32495 a95241bf-73f2-0310-859d-f6bbb57e9c96
* Removed the headers/gnu from the default headers (the Jamfiles needing it
use it explicitly, now) and moved it under headers/compatibility/.
* Added libgnu.so to the image. Still untested, though.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@32481 a95241bf-73f2-0310-859d-f6bbb57e9c96
longer require libiconv
* removed libiconv from dependencies of DevelopmentMin, as this is
no longer true
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@32479 a95241bf-73f2-0310-859d-f6bbb57e9c96
Workaround for ld using 32k alignment between ELF segments, until a proper fix is found.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@32429 a95241bf-73f2-0310-859d-f6bbb57e9c96
in safe mode.
* Removed the Terminal from the Bootscript.
* Ordered the servers alphabetically in HaikuImage.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@32379 a95241bf-73f2-0310-859d-f6bbb57e9c96
- Added him to Contributors
- Missing a icon thoug, any thoughts about how it should look?
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@32334 a95241bf-73f2-0310-859d-f6bbb57e9c96
* Also added the automatic ATA/IDE switch logic from HaikuImage.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@32304 a95241bf-73f2-0310-859d-f6bbb57e9c96
- don't clobber the parameter regs in the entry point,
- fix entry point address for netbsd loader emulation,
- added a gUImage global to point to the uimage blob with the tgz,
- added tgz info to platform stage2 args,
- add simple uimage support, just dumps the header and gets the nth blob in the image, (seems we have a bug in the math code, some infos don't print),
- made devices.cpp use them to publish the MemoryDisk,
- add an haiku_loader_nbsd.ub target which puts both the loader and kernel_arm for now (need to replace with the tgz).
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@32295 a95241bf-73f2-0310-859d-f6bbb57e9c96
- consolidate board specific definitions into build/jam/board/*/BoardSetup to avoid duplicating address values everywhere,
- add various addresses, boot script, custom C/C++ flags and SD card definition,
- not sure BoardSetup is included at the best place though,
- replaced board-specific ldscript with passing the loader address directly to LD from BoardSetup,
- added haiku.mmc target which generates an mmc/SD card image with a FAT partition with the files needed to boot for the board, should later be integrated with haiku.image with the BFS partition offset passed to bfs_shell, requires apt:sfdisk,mtools on GNU/Linux,
- added some more rules, one to build a script for the SD image,
- fake a NetBSD loader for now, U-Boot doesn't know haiku, and we'll need a way to pass the tgz image and RAM size, we'll either use standlone way (usual C argv[]) or the NetBSD args,
- style fixes,
- 80 cols, /me pets Ingo.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@32284 a95241bf-73f2-0310-859d-f6bbb57e9c96
on it. With the other changes already made, we can now use a 1440k boot image
for x86 as well, again.
* If you build a CD, you'll have to take extra care to see whether it still fits
on the floppy or not - space is really tight already.
* Made USB support optional for the CD-ROM. It's turned on, though, since we do
want to support USB-CD-ROMs by default; this is just something you can use
once in case we need to enlarge the boot floppy to 2880k again.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@32282 a95241bf-73f2-0310-859d-f6bbb57e9c96
Since we don't support Flattened Device Trees yet (and they don't solve all the issues), we need a place to hole board-specific config, which are different even though we use U-Boot on ARM. Things like cpu & mmu type...
U-Boot doesn't really help us there anyway, it only passes a few board infos (RAM banks & the bill), and optionally other stuff if we fake a linux kernel or netbsd loader, but still not enough. FDT support isn't available for ARM in U-Boot yet either. So for now, and likely for stuff we can't get from FDT, we'll put board-specific config there.
Unlike desktop machines were we want a single kernel per arch, we'd rather have the kernel built for a single board without having to handle detecting mmu type at boot and switching calls like I did on m68k.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@32137 a95241bf-73f2-0310-859d-f6bbb57e9c96
* Replaced Pe GCC4 package with one that works again after the BToolTip
addition.
* Disabled Firefox and Vision GCC4 packages for the time being, so that one
at least gets a working hybrid installation.
* Added Clockwerk GCC2 and GCC4 packages. I also added it to the alpha
release build profile, so that people testing the pre-alpha images have
more easy access to it. I am not sure if it should stay there, since it may
not be polished enough. Feedback welcome! :-)
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@32112 a95241bf-73f2-0310-859d-f6bbb57e9c96
* Changed the boot loader to have architecture dependent partition/file system
support. Amiga/Apple partitions, and the AmigaFFS file system are now only
supported on PPC, while EFI GPT, and the FAT file system is now only supported
on x86.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@31713 a95241bf-73f2-0310-859d-f6bbb57e9c96
in others, and those where we already provide functionality for (VLC, Beam).
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@31581 a95241bf-73f2-0310-859d-f6bbb57e9c96
in /boot/common/bin (why does it care where sed lives?)
* revert subversion to 1.6.2, as that does not depend on the expat optional
package
I think we (well, I) should be more thorough when testing new packages,
it would probably be a good idea to test each package on a new, minimal
image.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@31486 a95241bf-73f2-0310-859d-f6bbb57e9c96
it (headers and library) from the image. The libiconv in our tree is
only used internally as a backend for libtextencoding. The real libiconv
is provided as an optional package.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@31452 a95241bf-73f2-0310-859d-f6bbb57e9c96
* gcc-4.3.3 did contain too-far-stripped versions of static libraries, missing all symbols.
Now only the unneeded ones have been removed - fixing the build of the kernel on haiku natively
* libiconv was missing the shared versions of the libraries. I have updated the package to 1.13.1
and built it with shared libs (which took me considerable time to get right - the auto*-suite
basically sucks)
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@31450 a95241bf-73f2-0310-859d-f6bbb57e9c96
multiple jobs. The problem was that the dummy targets used to compose the
scripts were independent from each other and jam could thus execute their
respective actions concurrently. We do now create a dependency chain between
the dummy targets of each script, so that jam is forced to execute the actions
sequentially.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@31419 a95241bf-73f2-0310-859d-f6bbb57e9c96
unified the Reader and Decoder plugins and renamed the add-on to "ffmpeg".
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@31358 a95241bf-73f2-0310-859d-f6bbb57e9c96
Fixes bug #4035.
* Create the libnetwork.so compatibility symlinks only for gcc 2.
* Install only the shared libstdc++ to /system/lib.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@31150 a95241bf-73f2-0310-859d-f6bbb57e9c96
incorrect check in the DevelopmentBase package. Thanks to Joseph Prostko for
the hint.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@31132 a95241bf-73f2-0310-859d-f6bbb57e9c96
Only libGL.so aliases, libglut.so and libGLU.so, deserves to be there.
Automatic space/tab cleanup.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@31128 a95241bf-73f2-0310-859d-f6bbb57e9c96
stripping the grist of SYSTEM_PREFERENCES. This also finally closes#3976
again.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@30997 a95241bf-73f2-0310-859d-f6bbb57e9c96
save for the additional '&'/'*' print_demangled_call() is printing for
reference/pointer arguments.
* Moved the new demangler and the gcc 2 demangler into the same module
always supporting both (the right one is chosen). In mixed gcc 2/gcc 4
environments we obviously need both of them.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@30954 a95241bf-73f2-0310-859d-f6bbb57e9c96
have a simple dedicated heap for the kernel debugger with stacked allocation
pools (deleting a pool frees all memory allocated in it). The heap should
eventually be used for all commands that need temporary storage too large for
the stack instead of each using its own static buffer.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@30949 a95241bf-73f2-0310-859d-f6bbb57e9c96
Both gcc2 and gcc4 packages are available now for installation.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@30935 a95241bf-73f2-0310-859d-f6bbb57e9c96
depends on CDRecord for mkisofs, which is used for building the
*-cd targets. Thanks!
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@30917 a95241bf-73f2-0310-859d-f6bbb57e9c96
* added watch command, which executes a program periodically, showing output full screen.
* added watch to the image.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@30900 a95241bf-73f2-0310-859d-f6bbb57e9c96
OptionalPackages. This makes the content definition part in
AlternativeGCCArchive superfluous.
* Moved the cc and c++ wrapper scripts from src/bin to data/bin.
* Added build variable HAIKU_ADD_OPTIONAL_PACKAGES to add optional packages
-- the list can be separated by slashes to allow easier passing through
the shell.
* When invoking the sub-jam that builds the alternative GCC archive, we force
it to ignore the UserBuildConfigs and we enable the optional packages
enabled in the main jam.
* Reorganized /boot/develop:
- There's now an "abi" subdirectory containing a <arch>/<gcc>/ subdirectory
for each installed ABI-incompatible gcc version and a "current" symlink
pointed to the currently selected one.
- All ABI-dependent directories under /boot/develop/ (lib/x86, headers/cpp,
tools/gnupro) symlink into /boot/develop/abi/current.
- Changed BELIBRARIES to contain
/boot/develop/abi/current/library-paths/common instead of /boot/common/lib.
The former is a symlink to either /boot/common/lib or
/boot/common/lib/<gccVersion>. There's also a respective "home" symlink.
- Repackaged the optional binutils+gcc 2/4 packages accordingly. Also fixed
the obsolete /boot/beos/system/lib/libstdc++.so symlink in the gcc 4
package.
- The new structure allows to switch between compilers by changing the
/boot/develop/abi/current symlink. Added script setgcc to do that.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@30875 a95241bf-73f2-0310-859d-f6bbb57e9c96
CopyDirectoryToHaikuImage just for the alternative GCC.
* Added rules Add{Files,Symlink}ToHaikuHybridImage. Those call both the
Add{Files,Symlink}toHaikuImage and Add{Files,Symlink}toAlternativeGCCArchive
rules, the latter with an optionally slightly changed parameter.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@30873 a95241bf-73f2-0310-859d-f6bbb57e9c96
Now that's done like building the network boot archive, which gives us a lot
more flexibility for defining its contents.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@30850 a95241bf-73f2-0310-859d-f6bbb57e9c96
symbols recently introduced. Until init_term_dyn.o is linked into kernel
add-ons, too, we link with haiku_version_glue.o, so we have those symbols
in kernel add-ons as well.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@30818 a95241bf-73f2-0310-859d-f6bbb57e9c96
- Added it to the image.
- Anyone wants to come up with an icon for it? :)
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@30736 a95241bf-73f2-0310-859d-f6bbb57e9c96
themselves in busses/ata instead of busses/ide.
* Re-introduce Francois change to install these drivers in busses/ata
when building with HAIKU_ATA_STACK = 1.
* Adopted the device manager to look for drivers in busses/ata
additionally to busses/ide.
This change works fine with a clean installation on a computer where I can
(and indeed have to) use the new ATA stack.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@30695 a95241bf-73f2-0310-859d-f6bbb57e9c96
publish themselves in busses/ide, so you cannot just move them to busses/ata
without changing that in the source as well. The object files are still built
in the separate busses/ata under generated.
* src/system/kernel/device_manager/device_manager.cpp also hardcodes
busses/ide in two places.
I tried changing all of this to add busses/ata, but my system remains
unbootable with the new ATA stack. I do have another system, and because
of the previous mixup in HaikuImage, there it installed the drivers in
busses/ide when building for the new ATA stack (by mistake), but those
drivers actually publish themselves in busses/ide, so this system actually
boots with the new ATA stack, because of the mixup. Therefore My change here
to install into busses/ide for either stack should be correct for now and should
actually fix building the *old* stack.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@30671 a95241bf-73f2-0310-859d-f6bbb57e9c96
* integrating most of the locale kit into the build (and image)
* removed LocaleBuild.h and _IMPEXP_LOCALE since that does not make
sense for elf (which usually exports all symbols anyway)
* added a couple of locale kit related pseudo targets for convenience
Hey, some of that stuff already seems to work :-)
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@30545 a95241bf-73f2-0310-859d-f6bbb57e9c96
original version:
- removed the BFS bug work-around to create two temporary files first; this
work around is not needed in our BFS implementation.
- improved error output.
- remove attributes before rewriting them. This is needed as BFS won't update
the indices anymore if the attribute has not actually been changed.
- applied our coding style.
* This also fixes bug #3843.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@30511 a95241bf-73f2-0310-859d-f6bbb57e9c96
anymore. This was the case for GCC4 already but is now also true for GCC2. We
might want to look into that again, or we can just ignore it as noone is really
using floppies anymore and for eltorito boot we can live with the 2.88 floppy
emulation.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@30312 a95241bf-73f2-0310-859d-f6bbb57e9c96
- DevelopmentMin: Contains only the stuff that comes with the source tree.
- DevelopmentBase: DevelopmentMin + common development tools (gcc, binutils,
bison, yacc,...) -- basically everything needed to build Haiku from the
sources.
- Development: DevelopmentBase + Perl + autotools -- the porters' tools.
* Moved "make" from the base image to the DevelopmentMin package. It should
really be removed from the tree completely and be available as download
package instead... someday.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@30249 a95241bf-73f2-0310-859d-f6bbb57e9c96
I couldn't find any problems with this release so far. One certain improvement
is the now working MKV support. Thanks a lot!
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@30239 a95241bf-73f2-0310-859d-f6bbb57e9c96
- Cleanup and smaller issues in the preferences app.
- Add driver and preferences to the image.
The driver supports some Pentium M and VIA Centaur CPUs (1000 to 2100 Mhz) and need acpi to detect the cpu device, so you have to enable acpi in the kernel setting file to test it.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@30234 a95241bf-73f2-0310-859d-f6bbb57e9c96
* enable bash_completion loading in etc/profile. this fixes on the second part #2886.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@30233 a95241bf-73f2-0310-859d-f6bbb57e9c96
enter/exit code. There's no real reason not to keep kernel breakpoints
enabled when in userland (unless there are breakpoints installed for the
team, of course).
* Enabled kernel breakpoints by default (check your kernel_debug_config.h,
if you have overridden it!), since they don't really add any overhead
anymore.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@30206 a95241bf-73f2-0310-859d-f6bbb57e9c96
* The Save file panel has no more overlapping controls. (patch by Maxime Simon,
Thanks a lot!)
* Functions at the top can now be jumped to via function popup.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@30161 a95241bf-73f2-0310-859d-f6bbb57e9c96
sets the HAIKU_YASM build variable, which will be checked in BuildSetup.
Re-running configure or adding the variable manually to
generated/build/BuildConfig is required.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@30145 a95241bf-73f2-0310-859d-f6bbb57e9c96
raw image. This fixes the problem that an existing image couldn't be resized.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@30133 a95241bf-73f2-0310-859d-f6bbb57e9c96
gcc 2.95.3 build:
Cc /home/bonefish/develop/haiku/haiku/generated-gcc2/objects/haiku/x86/release/add-ons/media/plugins/avcodec/libavcodec/dsputil_mmx.o
In file included from /home/bonefish/develop/haiku/haiku/src/add-ons/media/plugins/avcodec/libavcodec/x86/dsputil_mmx.c:31:
/home/bonefish/develop/haiku/haiku/src/add-ons/media/plugins/avcodec/libavcodec/x86/mmx.h:24: warning: #warning Everything in this header is deprecated, use plain __asm__()! New code using this header will be rejected.
/home/bonefish/develop/haiku/haiku/src/add-ons/media/plugins/avcodec/libavcodec/x86/dsputil_mmx.c: In function `gmc_mmx':
/home/bonefish/develop/haiku/haiku/src/add-ons/media/plugins/avcodec/libavcodec/x86/dsputil_mmx.c:1753: Invalid `asm' statement:
/home/bonefish/develop/haiku/haiku/src/add-ons/media/plugins/avcodec/libavcodec/x86/dsputil_mmx.c:1753: fixed or forbidden register 6 (bp) was spilled for class GENERAL_REGS.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@30122 a95241bf-73f2-0310-859d-f6bbb57e9c96
build.
* Remove the APE reader from the image as it also depends on the non-working
yasm rule.
Please don't just leave the build in such a broken state. It's really annoying
when you're held up by stuff like that when you want to work on something.
Just leave changes like those disabled until you have verified that they work.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@30111 a95241bf-73f2-0310-859d-f6bbb57e9c96
them to the image. Thanks Urias for testing, submitting patches and... being
patient ;)
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@30094 a95241bf-73f2-0310-859d-f6bbb57e9c96
that also sets LOCATE, which could cause jam to incorrectly place our
directory. Should fix the problems with the SSL build feature some people
have been seeing.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@30039 a95241bf-73f2-0310-859d-f6bbb57e9c96
build/jam/OptionalPackageDependencies and include it earlier (before the
Jamfiles).
* Introduced build/jam/OptionalBuildFeatures which is supposed to do the setup
for optional build features that need it.
* Renamed USE_SSL to HAIKU_BUILD_FEATURE_SSL and made it more intelligent.
The OpenSSL optional package is downloaded and unzipped automatically when
enabled. Switching between enabled/disabled HAIKU_BUILD_FEATURE_SSL is
handled gracefully -- the concerned components are built in separate
subdirectories. Adding the OpenSSL optional package to the image also enables
HAIKU_BUILD_FEATURE_SSL.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@30021 a95241bf-73f2-0310-859d-f6bbb57e9c96
* Added DownloadOptionalPackage which is mainly a wrapper around DownloadFile
preventing the package from being downloaded twice, even if invoked more
than once.
* InstallOptionalHaikuImagePackage uses DownloadOptionalPackage now.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@30020 a95241bf-73f2-0310-859d-f6bbb57e9c96
directories when a certain feature is enabled/disabled/configured a certain
way.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@30019 a95241bf-73f2-0310-859d-f6bbb57e9c96
"on_exit" with which you can add commands to run when exiting the debugger.
With this you could for example "on_exit sync" and "on_exit shutdown -r" when
your app_server crashed.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@30016 a95241bf-73f2-0310-859d-f6bbb57e9c96
- Introduce a database of known providers.
- Guess the mx server if the provider is not known.
- Guess default setting.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@29969 a95241bf-73f2-0310-859d-f6bbb57e9c96
* I noticed a bit too late that we usually have lower caps folder in our
repository. Well, if someone complains enough... :-)
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@29942 a95241bf-73f2-0310-859d-f6bbb57e9c96
* Cleaned up CannaLooper.cpp/h to mostly conform to our coding style.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@29897 a95241bf-73f2-0310-859d-f6bbb57e9c96
* Made the TimeZoneView less error prone, and also actually use Haiku code (the
previous check didn't work since it used #if, not #ifdef).
* Also took the liberty to rename our boot loader to haiku_loader, since I had
to update the nasm binary anyway. Updated the assembly sources to nasm 2.0.
* I haven't found where the synth location in the MIDI code is specified,
though.
* Also, NetBootArchive, and FloppyBootImage haven't been updated yet. Will do
so next.
* Some optional packages still put their license to beos/etc/licenses. I didn't
update them yet, as we'll probably do so anyway at some point. Also, I think
we might want to introduce a common/data/licenses instead for those.
* If you encounter any problems, please tell!
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@29876 a95241bf-73f2-0310-859d-f6bbb57e9c96
files in /boot/home/config/boot. Thanks! Though eventually I'd like to have a
more intuitive method of adding start up applications.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@29814 a95241bf-73f2-0310-859d-f6bbb57e9c96
(mostly at least). Also disables -Werror for the binutils, but those should
be fixed eventually.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@29804 a95241bf-73f2-0310-859d-f6bbb57e9c96
* seems we hit a race during shutdown, thus the BGLView would already be delete
by unload_add_on, crashing the screenblanker (tested with several GL saver)
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@29793 a95241bf-73f2-0310-859d-f6bbb57e9c96
folders in /boot/beos/, but are real folders, with links to the respective
entries in the /boot/beos/preferences and demos folders. This allows third
party software to place links into the Preferences and Demos entries in the
Deskbar. Fixes ticket #3612.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@29745 a95241bf-73f2-0310-859d-f6bbb57e9c96
Two notes by myself:
* I've changed the patch to remove code duplication. This is always preferable.
* GCC4 packages may break, because Haiku does not claim to keep binary
compatibility with itself until after the R1 release. Even then we may not
keep it for GCC4, since Haiku will most likely be GCC2, and there will be a
real GCC4 switch where we will try to make API changes that will be supported
in future releases. So GCC4 packages should be considered very carefully.
In the case of Pe, there may be the benefit of faster launch times, since
most libs will be already loaded (unlike if it's a GCC2 package on a GCC4
Haiku). I am just saying the benefits need to outweight the additional work
to maintain and test these packages.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@29744 a95241bf-73f2-0310-859d-f6bbb57e9c96
ported software:
* If the macro B_USE_POSITIVE_POSIX_ERRORS is defined the POSIX error code
constants (ENOMEM, EINTR,...) will have positive values.
* Introduced the macros B_TO_{POSITIVE,NEGATIVE}_ERROR() which do convert a
given error code to a positive/negative value.
* Added static library libposix_error_mapper.a that overrides all POSIX
functions (save the ones I forgot to add :-)) directly meddling with error
codes (having them as parameter or returning them) dealing with the
positive<->negative error code conversions. The functions have hidden
visibility, so they affect only the shared object they are linked into.
* So ideally all one has to do is to build a ported software with
-DB_USE_POSITIVE_POSIX_ERRORS and -lposix_error_mapper and be good with
respect to error code problems.
* Potential issues:
- When mixing ported and Haiku native code, i.e. using Haiku native code in
a ported software or using a ported library in a Haiku native application
care must be taken to convert error codes where the two interface. That's
what the B_TO_{POSITIVE,NEGATIVE}_ERROR() macros are supposed to be used
for.
- A ported static library can obviously not be linked directly against
-lposix_error_mapper. The shared object linking a against the ported static
library has to do that. The previous point applies when that causes mixing
with Haiku native code.
- When dependent ported libraries are used probably all of them should use
the error mapping.
Comments welcome.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@29653 a95241bf-73f2-0310-859d-f6bbb57e9c96
which auto-generates dependencies. It was written by Lars Duening for BeOS
and uses libglob, which is also part of make. To re-use libglob and since
make is already part of the Haiku tree, I added mkdepend to the bin tools.
* Added Lars Duening's copyright to AboutSystem.
* Added skeleton makefile and makefile-engine to data/develop.
* Added mkdepend and makefile-engine files to the Development optional package.
It could be argued to move the make bin command there too, from it's current
location in the HaikuImage file. However, make could be useful to always
have available.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@29609 a95241bf-73f2-0310-859d-f6bbb57e9c96
--alternative-gcc-output-dir configure option has been specified,
HAIKU_ADD_ALTERNATIVE_GCC_LIBS is set by default. One has to explicitely
unset it in UserBuildConfig to avoid building the alternative gcc libs.
* Adjusted documentation accordingly.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@29607 a95241bf-73f2-0310-859d-f6bbb57e9c96
headers in the right places (/boot/common). I made it depend on the Development
package, since without it it wouldn't be useful. It also refuses to install on
a GCC4 based Haiku, since it's intended to help building some popular
BeOS/Haiku software, and there you couldn't link against GCC2 libs I suppose
when you have GCC4 development tools.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@29451 a95241bf-73f2-0310-859d-f6bbb57e9c96
- Pe - 2.4.1 built in Haiku gcc2
- BeZillaBrowser -- built in Haiku gcc4
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@29420 a95241bf-73f2-0310-859d-f6bbb57e9c96
RecursiveLock in the kernel.
* Several adjustments according to UserlandFS header changes.
* Re-added reiserfs to image.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@29410 a95241bf-73f2-0310-859d-f6bbb57e9c96
* Check the first argument for "help" as well. If given print a somewhat
helpful text. Consider this my excuse to close ticket #1883. :-)
* Track available and added optional packages and fail, if an optional package
is requested that doesn't exist. Closes ticket #3332.
* Check for duplicate build profile definitions and fail if encountered.
Closes ticket #3333.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@29298 a95241bf-73f2-0310-859d-f6bbb57e9c96
* Added debugger commands to resolve usb_ids to pipes.
* Adjusted the physical memory allocator to be usable in a slimmed down mode
when running inside the kernel debugger.
* Implemented USB keyboard support for KDL through a kernel debugger add-on.
* Added kgetc() and made use of it where previously individual methods were used
to ensure that reading characters always goes through the kernel debugger
add-ons and the other methods.
This has some preconditions to meet though:
1) The keyboard must be in the boot protocol (currently the case but needs to
be revisited once we have a full usb_hid).
2) The keyboard must be attached to a UHCI root port (i.e. not use EHCI or OHCI,
also not through hubs unless those are USB 1.1).
3) the usb_hid driver has to be opened for this to work. This means that for the
time between initializing USB and when usb_hid is opened by the input_server
there is no keyboard support.
Also note that this has no way of detecting hot-plug, meaning that you can't
re-attach your USB keyboard from the hub to the root port once in KDL.
On the bright side of things, since this is a non-destructive mechanism it is
possible to enter and leave KDL without loosing the USB state.
Tested OK in QEMU, not tested on real hardware yet, will see in a few minutes.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@29291 a95241bf-73f2-0310-859d-f6bbb57e9c96
* Add attribute_overlay and write_overlay to the image/floppy instead.
* Mount a iso9660 boot volume with both write and attribute overlay for now.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@29261 a95241bf-73f2-0310-859d-f6bbb57e9c96
Therefore we switch to building a 2.88 floppy image in that case so it's at
least usable to build a bootable CD.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@29211 a95241bf-73f2-0310-859d-f6bbb57e9c96
what we want.
* Remove some more temporary files/directories after the build.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@29209 a95241bf-73f2-0310-859d-f6bbb57e9c96
clean yet. Provides a haiku-cd target and creates a bootable image using mkisofs.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@29203 a95241bf-73f2-0310-859d-f6bbb57e9c96
* When booting from an iso, mount the boot volume with the overlay layer.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@29202 a95241bf-73f2-0310-859d-f6bbb57e9c96
By default it now presents a relatively concise list of USB
devices found on the bus, with an optional -v flag to dump
exhaustive detail. It still also takes an optional device
parameter in case you only want information for a particular
device.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@29185 a95241bf-73f2-0310-859d-f6bbb57e9c96
* Also don't install the GCC2 package on a GCC4 based hybrid, as it's again not
usable without proper manual setup.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@29160 a95241bf-73f2-0310-859d-f6bbb57e9c96
These all work on pure GCC4 images as well because they do not use any of our
C++ APIs.
* Remove the GCC4 package from hybrid installs though, as it's not usable
without proper setup. Also the trick with rewriting the symlink obviously
doesn't work because symlinks are done way earlier than unzipping the optional
packages when building the image.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@29158 a95241bf-73f2-0310-859d-f6bbb57e9c96
* Enable -Werror on GCC4 builds as well (limited to the same selected targets).
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@29118 a95241bf-73f2-0310-859d-f6bbb57e9c96
and also comes with proper default includes.
* If installing GCC4 as part of a GCC2 based hybrid build, re-setup the gnupro
link that is overwritten by the GCC4 package.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@29085 a95241bf-73f2-0310-859d-f6bbb57e9c96
installed either when building with GCC4 or when making a hybrid. Can be
installed separatly as well. Have fun :-)
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@29046 a95241bf-73f2-0310-859d-f6bbb57e9c96
include_next work properly with newer headers. GCC 4.3.2 has a <cstddef> in its
C++ headers for example that does an include_next of <stddef.h>. The latter is
located in the C headers. For this to work, the include directory for the C
headers needs to be specified later than the one of the C++ headers.
With that Haiku is now completely buildable with GCC 4.3.2.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@28995 a95241bf-73f2-0310-859d-f6bbb57e9c96
the main() signature are not applied and do not generate errors when violated.
Our bootloader has a non-standard main() signature for example, which is of
course fine.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@28983 a95241bf-73f2-0310-859d-f6bbb57e9c96
old invalid user listeners yet, though (ie. if a team dies).
* Implemented userland network monitor functions.
* Added a few notifications to the network stack, even though this part isn't
complete yet (especially notify_interface_changed()).
* Added optional debug output to the notifications module.
* Added the module to the image, it basically works now (tested).
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@28825 a95241bf-73f2-0310-859d-f6bbb57e9c96
UserBuildConfigRulePreImage, and UserBuildConfigRulePostImage which will be
invoked at different points in the build system execution. They can be
overridden in UserBuildConfig, thus allowing for executing user code at
those points.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@28765 a95241bf-73f2-0310-859d-f6bbb57e9c96
It's getting annoying having to maintain so many identical driver lists... maybe those should be factored out in some way...
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@28654 a95241bf-73f2-0310-859d-f6bbb57e9c96
code duplication and will make maintaining it much easier.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@28647 a95241bf-73f2-0310-859d-f6bbb57e9c96
* adjusted libtextencoding's Jamfile
* added libiconv.so to image
* added iconv headers to optional package Development (under 3rdparty)
* removed old private version of libiconv from textencoding
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@28631 a95241bf-73f2-0310-859d-f6bbb57e9c96
* Updated autoconf, automake, libtool, texinfo, flex, and bison to
their respectively current version. They are installed in /boot/common
now.
* Removed the /boot/home/config/bin/perl and /bin/m4 symlinks again.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@28582 a95241bf-73f2-0310-859d-f6bbb57e9c96
source and it works fine.)
* Updated WonderBrush package. The new version is compiled on Haiku and
improves the installation of the document mimetype (finally a more reliable
sniffer rule, thanks to Francois for helping me with this). The About window
is fixed to no longer use a hardcoded font file path. This version only runs
on Haiku, but it is fully unlocked! Next version with new features won't be.
Also comes with a new vector icon for the native document type.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@28570 a95241bf-73f2-0310-859d-f6bbb57e9c96
redownloading the package.
* Added link "vlc" to "VLC media player" in /boot/common/bin to make it
easier on people launching VLC from the command line.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@28558 a95241bf-73f2-0310-859d-f6bbb57e9c96
* While I was at it, I also removed the extra screen savers until Ryan fixed
the issue (bug #2339).
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@28547 a95241bf-73f2-0310-859d-f6bbb57e9c96
* Added GNU M4 1.4.12 package to the Development optional package.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@28486 a95241bf-73f2-0310-859d-f6bbb57e9c96
* Firefox -> 2.0.0.17, includes new HVIF icon
* VLC -> renamed VLC to "VLC media player" which is what the official name is
* Pe -> updated to most recent version (called it RC2) which includes a few
fixes and new HVIF icons for most of it's supported document types. Renamed
the application folder to "Pe" and removed the "Drag lpe here to install"
link. Renamed the application itself to "Pe".
Hope these changes are alright with everyone.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@28485 a95241bf-73f2-0310-859d-f6bbb57e9c96
* Implemented a small app "checkfs" to check partitions and put it on the image.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@28435 a95241bf-73f2-0310-859d-f6bbb57e9c96
apparently is enabled by default on newer Ubuntu versions and breaks the
gcc build.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@28396 a95241bf-73f2-0310-859d-f6bbb57e9c96
installation has been relocated to /boot/common and socket support is
enabled.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@28364 a95241bf-73f2-0310-859d-f6bbb57e9c96
the wrong Link actions were used (always the no-attributes-support ones
which remove the target first), for instance.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@28304 a95241bf-73f2-0310-859d-f6bbb57e9c96
* vm_clone_area() does now set the B_SHARED_AREA flag on both the source
and the cloned area. This is necessary, since it would no longer be
guaranteed that areas are backed by leaf caches only (after
fork()ing), which doesn't work with our cache merging strategy.
Fixes#2605.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@28296 a95241bf-73f2-0310-859d-f6bbb57e9c96
* Turned the checks for all those macros to "#if"s instead of "#ifdef"s.
* Introduced macro KDEBUG_LEVEL which serves as a master setting.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@28248 a95241bf-73f2-0310-859d-f6bbb57e9c96
* Refactored a User Guide style documentation from the previous Welcome
documentation. The Welcome documentation links to the User Guide, the
biggest difference is that there is now a separate contents page.
* Improvements to the text.
* Added Tracker-Add-ons page.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@28211 a95241bf-73f2-0310-859d-f6bbb57e9c96
Make sure you rm generated/downloads/NetSurf.zip to get the new replicable one.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@28190 a95241bf-73f2-0310-859d-f6bbb57e9c96
* Implemented BGradient, BGradientLinear, BGradientRadial,
BGradientDiamond, BGradientConic and BGradientRadialFocus
new Interface Kit classes.
* Implemented all the (AGG-based) backend necessary in
the app_server to render gradients (Painter, DrawingEngine)
* app_server/View can convert a BGradient layout to screen
coordinates.
* Added BGradient methods of the Fill* methods in BView.
* Implemented a test app and added it to the image as a
demo.
* Adopted Icon-O-Matic and libs/icon in order to avoid
clashing with the new BGradient class. Re-use some
parts where possible.
Awesome work, Artur! Thanks a lot. Now a more modern
looking GUI has just become much easier to implement! :-)
TODO:
* Remove the need to have gradient type twice in the
app_server protocol.
* Refactor some parts of the patch to remove duplicated
code (Painter, DrawingEngine).
* Adopt the BPicture protocol to know about BGradients.
* Review some parts of the BArchivable implementation.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@28109 a95241bf-73f2-0310-859d-f6bbb57e9c96
* added opengl to build be api headers
* define USES_BE_API for gen_matypes
this should fix the build for Linux which don't provide GL headers :)
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@28050 a95241bf-73f2-0310-859d-f6bbb57e9c96
please let us know. Especially shutting down your system can potentially
change its behaviour (maybe even for the better, but maybe not :-)).
* Added the GCC2 KDL demangle module to the image by default.
* White space cleanup.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@28020 a95241bf-73f2-0310-859d-f6bbb57e9c96
build. This is mostly complete, excepting BBufferConsumer's virtuals are not
yet implemented, and needs more testing to ensure that the encoded stream is
correctly read from the camera, though based off preliminary tests by Francois,
detection/publishing at least seems to work.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@27965 a95241bf-73f2-0310-859d-f6bbb57e9c96
copied to /boot/beos/documetation/welcome and a link to welcome.html
is placed on the Desktop. The mime_update.sh script makes sure that
the mime type of the html files is set. However, Firefox has a problem
when it is launched for the first time via double clicking an HTML
file. Apparently, it initializes some settings and relaunches itself,
which in turn makes it forget to open the file. A second problem is
annoying as well: When launching Firefox to display a local file,
it will always open a second window with the default web location.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@27868 a95241bf-73f2-0310-859d-f6bbb57e9c96
HAIKU[_KERNEL]_WARNING_CCFLAGS.
* Added -Werror for various parts of the source tree for the gcc 2
build. Feel encouraged to add more.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@27842 a95241bf-73f2-0310-859d-f6bbb57e9c96
Currently it only contains KDEBUG and the block cache debugging macros.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@27816 a95241bf-73f2-0310-859d-f6bbb57e9c96
various system information.
* Implemented retrieving some VM stats via this call.
* The VM now maintains a page fault counter, and sets system_info::page_faults
accordingly.
* Added a (pretty simple) "vmstat" command line app.
* Minor cleanup.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@27597 a95241bf-73f2-0310-859d-f6bbb57e9c96
first remove the target and its attributes (if any). Before gcc would
just unlink it and leak the attributes, which could lead to later
mixups, if the file's inode ID was re-used. As reported by Rene this
improves the attribute mixup situation, but doesn't solve it
completely. So that status quo is still the same: When using the
generic attribute emulation one has to build from the scratch to be
sure all attributes are fine.
* Got rid of superfluous whitespace.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@27385 a95241bf-73f2-0310-859d-f6bbb57e9c96
exists -- this seems to happen only in case a specific name is given for
the target, though, so it might well be a bug in the fs_shell as well.
Seen when copying kernel.so to _KERNEL_ on a "update-all".
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@27016 a95241bf-73f2-0310-859d-f6bbb57e9c96
the revision failed using "svn info".
* While there is no official git tree, this should help those people using
svn over git.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@26977 a95241bf-73f2-0310-859d-f6bbb57e9c96
architecture: for now, we do this on the lowest layer only, therefore all
requests are handled synchronously (ie. in the scheduler's thread).
* Instead of using the block_io module, scsi_disk (and scsi_cd) are now
exporting a device on their own, and use an I/O scheduler with an appropriate
DMA resource.
* There are still lots of TODOs, and it can easily panic - don't update if
you intend to demo Haiku.
* scsi_periph now only has an io() function that get an io_operation, instead
of the previous read/write functions, moved preferred CCB size from those
functions into the device registration.
* Changed all scsi_periph files to C++.
* scsi_cd ported, too, but untested.
* Removed block_io from image - it will be removed completely soon.
* Temporarily commented an ASSERT() in the ATA bus manager (in case you use
it); it's sometimes triggered by the code now, and I haven't yet looked into
the issue -- doesn't seem to harm, at least.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@26828 a95241bf-73f2-0310-859d-f6bbb57e9c96
* {read,write}_pages() use vfs_{read,write}_pages() now, instead of
invoking the FS {read,write}_pages() hooks.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@26750 a95241bf-73f2-0310-859d-f6bbb57e9c96
in Tracker add-ons folder with short cut (like done for Backgrounds). Untested.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@26739 a95241bf-73f2-0310-859d-f6bbb57e9c96
- For simplicity we'll force using only insn common to 020 to 060, mostly to avoid unimplemented floating point ops in the kernel.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@26647 a95241bf-73f2-0310-859d-f6bbb57e9c96
the scheme that Ingo started and thus installs the license and copyright to the right
places.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@26603 a95241bf-73f2-0310-859d-f6bbb57e9c96
* add cygwin specific options.
* Cygwin cannot handle -fPIC option and throws warnings, thus we only use it on non windows platforms for the host tools.
* Windows uses PATH instead of LD_LIBRARY_PATH, so before calling a host tool this environment variable needs to be expanded... Brilliant...
* Using jam on Windows is kind of complicated, as the cygwin included gcc creates executables with a .exe extension. When jam parses dependencies for being up to date it ignores this extension again and tries to rebuild the executables again and again. This hack removes the extension after successful linking. Though jam has a SUFEXE variable for cygwin builds, we cannot use this one directly as crosscompiled targets do not have an extension, it is complicated to use the same jam for both platforms. A more clean attempt would be to check for the extension on each host target depending on the platform. This should be fixed later on.
* Btw. Say hello to Haiku compiling successfully on Windows :) with one patch to be discussed for jam...
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@26590 a95241bf-73f2-0310-859d-f6bbb57e9c96
be used to update an installation without erasing the whole volume (ie. it
works like install-haiku on BFS capable platforms).
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@26435 a95241bf-73f2-0310-859d-f6bbb57e9c96
straight all-static build, with only OpenSSL as dependency. Be sure to include
OpenSSH (and set a hostname) if you intend to use svn+ssh. Should work with
svn, svn+ssh, http and https. Feel free to replace with a proper dynamically
linked version once available.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@26158 a95241bf-73f2-0310-859d-f6bbb57e9c96
screen mode from the command line.
* With its "--fall-back" parameter, it's also thought to be called from BWindow
when a specific shortcut has been pressed (similar to screenshots) - this
part is not implemented yet. Anyone against <Command><Control>-<Escape>?
* Added it to the image.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@26150 a95241bf-73f2-0310-859d-f6bbb57e9c96
include the OSS media add-on (node), since Haiku comes with it's own
version. Therefor you can now add the OpenSound optional package and
it will just work out of the box, unless you have native drivers that
fight over the hardware with OSS. It is no longer necessary to delete
the opensound.media_addon from the home/config/add-ons/media folder.
If you don't build from scratch, make sure you delete
generated/download/OpenSound.zip or the change won't take effect.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@26064 a95241bf-73f2-0310-859d-f6bbb57e9c96
less.
* Added /etc/vim/vimrc. Besides fixing key mappings it also disables
compatibility mode and adjusts some settings to make using vi a more
pleasant experience.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@26028 a95241bf-73f2-0310-859d-f6bbb57e9c96
invoking it this way works at all; this avoids problems with readlink
programs that don't support the option.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@26018 a95241bf-73f2-0310-859d-f6bbb57e9c96
Temporarily removed the VESA driver, as long as it only builds on x86.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@25913 a95241bf-73f2-0310-859d-f6bbb57e9c96
controller. The device doesn't use the PCI_ide subclass (but
PCI_mass_storage_other) and requires not using compatibility mode. Otherwise
it's pretty much the generic_ide_pci driver.
* Directly adding the driver to the image.
This driver could either be merged into the generic ide driver so it supports
not quite standard devices, or this could be made into a driver that collects
all those non standard devices. Either way, this works for now and lets my
machine boot off the IDE drive :-)
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@25868 a95241bf-73f2-0310-859d-f6bbb57e9c96
should make default images bootable from USB automatically. DDing one to a
USB stick should work out of the box then (but this wipes the stick of course).
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@25836 a95241bf-73f2-0310-859d-f6bbb57e9c96
* Cleanup the license header and add authors
* Sort the available keymaps list in the config file and add 'dv'
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@25806 a95241bf-73f2-0310-859d-f6bbb57e9c96
keymap there too.
* Add a config header where one can select what KDL keymap should be used
(currently only 'us' and 'sg' are available though).
* Provide a third keymap that is used when the alt modifier is used (the swiss
german keymap is pretty useless without alt as all the useful keys like
backslash and curly braces use alt).
Our KDL is so powerful and nice to use, the only thing that bothered me was
that I always had to think about where some of the special keys are located in
the US keymap. So this simple compile-time keymap switching provided to be
helpful for me and might be for others too. Keymaps for other layouts obviously
have to be written before this becomes really useful.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@25803 a95241bf-73f2-0310-859d-f6bbb57e9c96
-nostdlib disables that for executables although it should be enabled by
default.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@25785 a95241bf-73f2-0310-859d-f6bbb57e9c96
* Minor cleanup of ide_isa, and generic_ide_pci (removed wrapper.h).
* Added ide_isa back to the image.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@25755 a95241bf-73f2-0310-859d-f6bbb57e9c96
either, it just hangs there trying ot connect and eventually times out.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@25751 a95241bf-73f2-0310-859d-f6bbb57e9c96
* Added legacy_sata and scsi_cd back to the image.
* Minor cleanup in scsi_disk.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@25739 a95241bf-73f2-0310-859d-f6bbb57e9c96
* Renamed scsi_dsk to scsi_disk.
* Joined all scsi_disk sources together to a single scsi_disk.cpp file.
* Cleanup.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@25737 a95241bf-73f2-0310-859d-f6bbb57e9c96
packages. Print an error message for unavailable packages.
* Detect the build of a GCC2/GCC4 hybrid image and install GCC2 packages
on a GCC4 build where no GCC4 package is available. I did not test
every GGC2 package on a GCC4 build, though I have not found any that
does not work. If a package gives problems, feel free to disable it
for the hybrid build or send me a note.
* Add new optional package for Beam. Though I could not test it since,
SATA AHCI does not work for me ATM. I know that Beam 1.1 for BONE is
unable to retrieve mails (times out). Maybe the R5 version has better
luck, will check later.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@25695 a95241bf-73f2-0310-859d-f6bbb57e9c96
* Removed std_ops(), as it wasn't used for anything, and is optional in Haiku.
* ide_isa, and legacy_sata are still waiting for the same set of changes :-)
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@25678 a95241bf-73f2-0310-859d-f6bbb57e9c96
* Moved devfs from fs/ to device_manager/, and separated the legacy driver
support from it.
* Removed fast_log module.
* There are a couple of (temporary) regressions, though:
- legacy SATA and ISA IDE support is disabled, the drivers haven't been
ported yet.
- The not yet used ATA bus manager hasn't been ported yet, either.
- AHCI changes have not been tested.
- the listdev command has been removed from the build (as it currently
doesn't work anymore).
- device manager generated IDs currently are not freed anymore when a device
node is removed.
- generic drivers can't yet use the new driver architecture.
- simple busses that do not support device types won't work yet.
- legacy driver publishing/unpublishing (ie. what USB needs) has not been
tested, and may be broken.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@25662 a95241bf-73f2-0310-859d-f6bbb57e9c96
Gerald Zajac. Thanks a lot!
* Also put it on the image by default.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@25583 a95241bf-73f2-0310-859d-f6bbb57e9c96
* Made the pthread_cond_t internals public. This is necessary to support
process shared condition variables. Fixed initializer macro.
* Made the pthread_rwlockattr_t structure opaque.
* pthread_t is no longer typedef'ed to int. It's the pointer to the
internal _pthread_thread structure.
* Removed __get_pthread(). pthread_self() can be used instead.
* No longer tunnel the pthread exit value through Haiku's thread exit
value. We do have a separate field in the _pthread_thread structure
for it, now.
* Handle detaching of threads correctly.
* pthread_rwlockattr_{g,s}etpshared() use the
PTHREAD_PROCESS_{SHARED,PRIVATE} constants, now.
* Commented out yet unsupported structures (barriers, spinlocks).
* Rebuilt APR optional package. The pthread changes weren't binary
compatible.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@25582 a95241bf-73f2-0310-859d-f6bbb57e9c96
* made the output easier to observe
* added the sigsuspend_6-1 test to the package
* made the fork_3-1 test return when it fails
* added output to the pthread_once tests
* other minor cosmetic changes
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@25567 a95241bf-73f2-0310-859d-f6bbb57e9c96
pointer also contains the toggle carry and the halt bit (which was obviously
always set as the endpoint had an error) the address comparison failed and
the head was dead in the water with all further transfers timing out until
a subsequet cancel cleaned the mess up again.
* Add the OHCI host controller driver to the image as it should now be fully
functional except for isochronous transfers.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@25565 a95241bf-73f2-0310-859d-f6bbb57e9c96
4). One has to have a (fully configured) "generated" directory for the
alternative gcc and specify it using the new option
"--alternative-gcc-output-dir" when configuring the main build.
Additionally the build variable HAIKU_ADD_ALTERNATIVE_GCC_LIBS has to be
set to "1".
If that has been done, when building the image a sub-jam is invoked that
generates the alternative libs and zips them. The main-jam unzips them
into the correct directory in the image. Note that the JAM build
variable has to be set when using a jam executable not invoked by "jam".
Tested with gcc 2 NetPositive, Pe, and FireFox under gcc 4 Haiku, and
with a few of the standard gcc 4 Haiku apps under gcc 2 Haiku. Seems to
work fine so far.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@25536 a95241bf-73f2-0310-859d-f6bbb57e9c96
the targets/symlinks added to a container/Haiku image directory.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@25535 a95241bf-73f2-0310-859d-f6bbb57e9c96
compatible with what our code assumed (pointers to objects of
TraceEntry and its POD base class trace_entry aren't identical
anymore).
* Added optional stack traces for ktrace_printf() output in the kernel.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@25531 a95241bf-73f2-0310-859d-f6bbb57e9c96
Added a new command line utility "mkfs" which can initialize a given volume
with a file system by it's short name via the new Disk Device API.
Thanks!
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@25491 a95241bf-73f2-0310-859d-f6bbb57e9c96
- fix build (at least CodyCam), NETAPI lib is now libnetapi for Haiku...
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@25488 a95241bf-73f2-0310-859d-f6bbb57e9c96
to contain headers shared by kernel and userland (mainly libroot).
* Moved quite a few private kernel headers to the new location. Split
several kernel headers into a shared part and one that is still kernel
private. Adjusted all affected Jamfiles and source in the standard x86
build accordingly. The build for other architectures and for test code
may be broken.
* Quite a bit of userland code still includes private kernel headers.
Mostly those are <util/*> headers. The ones that aren't strictly
kernel-only should be moved to some other place (maybe
headers/private/shared/util).
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@25486 a95241bf-73f2-0310-859d-f6bbb57e9c96
* The built-in services are no longer added as resource to libnetwork,
but as attribute. This removes the libbe dependency.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@25485 a95241bf-73f2-0310-859d-f6bbb57e9c96
AddLicenseToHaikuImage that can be used in optional package definitions
to add a copyright entry in AboutSystem and add a license file to
/etc/licenses.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@25313 a95241bf-73f2-0310-859d-f6bbb57e9c96
(just "sshd"), ATM. Not sure how we want to deal with daemons, yet.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@25311 a95241bf-73f2-0310-859d-f6bbb57e9c96
a bit:
* Added directory /etc/post_install, which can contain scripts that will
be executed on the first boot.
* Moved the mimeset invocations to such a script. Use the "-apps"
option instead of "-all". Since create_app_meta_mime() (and thus
mimeset) work recursively now, running the commands does actually have
an effect.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@25309 a95241bf-73f2-0310-859d-f6bbb57e9c96
- Prepend "ahci port" to all trace entries in ahci_port.cpp.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@25293 a95241bf-73f2-0310-859d-f6bbb57e9c96
- Added controller attribute to the AHCIPort class for debugging purposes.
AHCI is failing whenever the PRD table has an address above the 2048 Mb mark.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@25291 a95241bf-73f2-0310-859d-f6bbb57e9c96
block would be incorrectly addressed when allocating a stream - this could
cause random blocks to be overwritten, and therefore could cause many sorts
of problems.
* Moved BFS_TRACING macro to the tracing_config.h file, and let it follow the
new semantics of those other macros in there.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@25249 a95241bf-73f2-0310-859d-f6bbb57e9c96
* Introduced the TCP_TRACING macro in tracing_config.h.
* Enlarged the default trace size to something a tiny bit useful (but still
acceptable for systems with little RAM).
* Cleanup.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@25235 a95241bf-73f2-0310-859d-f6bbb57e9c96
Adrien Destugues