This translator only supports still images for now, and supports both
decoding and encoding.
Encoding support has been tested only with aom, rav1e doesn’t build on
Haiku yet, see https://github.com/haikuports/haikuports/pull/5534 for
one of the missing dependencies.
Change-Id: I716f4b862ed316b89b227bfed38072d72074201f
Reviewed-on: https://review.haiku-os.org/c/haiku/+/3040
Reviewed-by: waddlesplash <waddlesplash@gmail.com>
Reviewed-by: Jérôme Duval <jerome.duval@gmail.com>
Tested-by: Commit checker robot <no-reply+buildbot@haiku-os.org>
* Merge all except the x86_gcc2 one into a single "generic" one.
It is now exactly the same on all architectures, save a single
ifdef for x86_64, which needs a different compat version, as there
are still some packages built that far back and never rebuilt since!
* Group the requires according to category: first any arch packages,
then commands, then the GCC syslibs, then packages always depended
upon if they are available, and finally packages only depended upon
in "regular" builds.
* Put all packages inside HAIKU_BUILD_FEATURE_* ifdef tests,
and order them alphabetically within their category.
If I have done this all correctly, at least x86_64 should get an
identically generated haiku .PackageInfo as before this commit, save
the reordering changes. Others may differ based on package availability,
as they were missing the requisite #ifdef sections.
* virtio_mmio for riscv64,arm,arm64
* enable new FDT bus for riscv64,arm,arm64
Change-Id: I5141de4e0bfcb44c5368dfafdf68ebf06ca5fb93
Reviewed-on: https://review.haiku-os.org/c/haiku/+/4063
Reviewed-by: Jérôme Duval <jerome.duval@gmail.com>
* Allows invoking build tools at the command line without having
to mess with the LD library path environment variables
* Does not change the use of HOST_ADD_BUILD_COMPATIBILITY_LIB_DIR
within the build itself
* Darwin currently excluded, as it uses a different method for
specifying rpath
Change-Id: I4db443f2b5824ee70ad44418251a9996c14663bc
Reviewed-on: https://review.haiku-os.org/c/haiku/+/4163
Tested-by: Commit checker robot <no-reply+buildbot@haiku-os.org>
Reviewed-by: Alex von Gluck IV <kallisti5@unixzen.com>
Reviewed-by: Adrien Destugues <pulkomandy@gmail.com>
* Haiku now consumes right at 700 MiB on x86_gcc2h
after the webkit update.
Change-Id: Ia41a3e6252190e73feaa49ebe7c58ef4c80df4dc
Reviewed-on: https://review.haiku-os.org/c/haiku/+/4161
Reviewed-by: Alex von Gluck IV <kallisti5@unixzen.com>
- This will fix page translation fault when accessing
static variables.
- Now with this patch, we made uart pl011 works for qemu.
Change-Id: I8eecc18ad05bd950768b49d9ed268c4c2a3baf25
Signed-off-by: Han Pengfei <pengphei@qq.com>
Reviewed-on: https://review.haiku-os.org/c/haiku/+/4123
Reviewed-by: Adrien Destugues <pulkomandy@gmail.com>
Reviewed-by: X512 <danger_mail@list.ru>
Tested-by: Commit checker robot <no-reply+buildbot@haiku-os.org>
EFI System Partition was the last remaining holdout for mtools usage.
Change-Id: I988f82a2f4318f2f90ec1efb80f7ff5c8908aff7
Reviewed-on: https://review.haiku-os.org/c/haiku/+/4140
Reviewed-by: Alex von Gluck IV <kallisti5@unixzen.com>
Change-Id: I854de44c1b31066dfa522b946cb04a5190f6b0b6
Reviewed-on: https://review.haiku-os.org/c/haiku/+/4113
Tested-by: Commit checker robot <no-reply+buildbot@haiku-os.org>
Reviewed-by: Alex von Gluck IV <kallisti5@unixzen.com>
* Solves out of space issue building release images
Change-Id: I888836774732f65fde3574ef498b272d8285356f
Reviewed-on: https://review.haiku-os.org/c/haiku/+/4107
Reviewed-by: Alex von Gluck IV <kallisti5@unixzen.com>
Change-Id: I7bf7d5dac5bb576f9ca5fc55680fc369556f4312
Reviewed-on: https://review.haiku-os.org/c/haiku/+/4044
Tested-by: Commit checker robot <no-reply+buildbot@haiku-os.org>
Reviewed-by: Alex von Gluck IV <kallisti5@unixzen.com>
* We accept the riscv loader to build it, but don't really put it
into the image since for now you'll just want the haiku_loader.riscv
for things like TinyEMU
Change-Id: I5005dd5063f2a84cf426db4c40635e87e579ad80
Reviewed-on: https://review.haiku-os.org/c/haiku/+/4075
Tested-by: Commit checker robot <no-reply+buildbot@haiku-os.org>
Reviewed-by: X512 <danger_mail@list.ru>
Reviewed-by: Alex von Gluck IV <kallisti5@unixzen.com>
Once change 2342 is in place (running first boot scripts exported from
packages), see https://review.haiku-os.org/c/haiku/+/2342,
remove data/system/boot/post_install/add_catalog_entry_attributes.sh
and related support infrastructure (magic files, launch_roster entries).
The work this script did can in fact be done at image creation time
instead of at first boot.
Change-Id: I485e1a0a87c3e6a6ba3f882e65996f2327134d37
Reviewed-on: https://review.haiku-os.org/c/haiku/+/3751
Reviewed-by: Adrien Destugues <pulkomandy@gmail.com>
- Switch to Python3
- Switch to mawk instead of gawk
- Update ffmpeg (there are several new dependencies)
- Update ICU
- Fix various pre-existing problems with packages not being properly
declared for gcc2 (but somehow it ended up working)
- remove curl, subversion, mercurial
Confirmed that both nightly and release images are building fine on both
32 and 64bit. However, non-x86 architecture may require re-bootstrapping
to do a complete nightly or release image build (the minimal profile
should be fine)
Fixes#16751.
Change-Id: Iacac92923c4113b3e0a49a64b0b4cc1b8e2f5e2e
Reviewed-on: https://review.haiku-os.org/c/haiku/+/3871
Reviewed-by: Adrien Destugues <pulkomandy@gmail.com>
this adds kernel & libroot stack protector hooks. it uses /dev/random in userspace.
A configure option --enable-stack-protector is added to activate -fstack-protector
on selected system components (ATM apps, kits, servers).
Change-Id: If3a2920ba9aa0a85eaff4ba6778947f8c76ade31
Reviewed-on: https://review.haiku-os.org/c/haiku/+/3895
Reviewed-by: Adrien Destugues <pulkomandy@gmail.com>
These will be added to the _devel packages so that other applications can link
to them.
Change-Id: If3fd231869823b42d6d896c6c9eb7a95c5fe715d
Reviewed-on: https://review.haiku-os.org/c/haiku/+/3666
Reviewed-by: Adrien Destugues <pulkomandy@gmail.com>
* Enable TLS for riscv64. For now select a dummy
implementation.
* RISC-V has a register (tp) dedicated to TLS
* All the "desktop-like" RV64 chipsets implement GC
* Same ISA we currently build for... but calls it out
in-case defaults change.
Change-Id: I623b6e5c309b6a6e80ec378e456b2335c561269d
Reviewed-on: https://review.haiku-os.org/c/haiku/+/3632
Reviewed-by: Adrien Destugues <pulkomandy@gmail.com>
* Fixes the ARM image to actually include Haiku within
a partition on the SD card.
* Drops the mtools requirement
* Drops the C/H/S requirements
Change-Id: Ie2776a09399ac181daab7a503e96e27ab7093af4
Reviewed-on: https://review.haiku-os.org/c/haiku/+/3608
Reviewed-by: Adrien Destugues <pulkomandy@gmail.com>
* Removes several previous hacks, and makes kernel loading
by our bootloader more reliable.
* Long list of "Couldn't find both text and data" errors
no gone in our bootloader as it loads our kernel
Change-Id: Ic9f5ed44975d41fb22d7ab19536261432abe84ba
Reviewed-on: https://review.haiku-os.org/c/haiku/+/3444
Reviewed-by: Alex von Gluck IV <kallisti5@unixzen.com>
Reviewed-by: Fredrik Holmqvist <fredrik.holmqvist@gmail.com>
Reviewed-by: Adrien Destugues <pulkomandy@gmail.com>
Hardlinked-By: Alexander von Gluck IV <kallisti5@unixzen.com>
Change-Id: I1a76647fe47949e950b4034629ad92ca16c53aa8
Reviewed-on: https://review.haiku-os.org/c/haiku/+/3325
Reviewed-by: waddlesplash <waddlesplash@gmail.com>
Hardlinked-By: Alexander von Gluck IV <kallisti5@unixzen.com>
Change-Id: Id37ef57b0042722ca8089e73d420d6e4edac1019
Reviewed-on: https://review.haiku-os.org/c/haiku/+/3121
Reviewed-by: Alex von Gluck IV <kallisti5@unixzen.com>
Jam comparison logic is string-based, and so was detecting GCC >= 10
as being < 2. This rectifies that by removing the GCC version parsing
from Jam logic entirely, and setting various BuildConfig variables
instead.
Change-Id: I0c0ae3b9002fb5e77f9ca7a78600c91871657f03
Reviewed-on: https://review.haiku-os.org/c/haiku/+/3293
Reviewed-by: Adrien Destugues <pulkomandy@gmail.com>
Reviewed-by: Jérôme Duval <jerome.duval@gmail.com>
Reviewed-by: Alex von Gluck IV <kallisti5@unixzen.com>
Combined with a buildtools CL, this will change the AR variable
to be more in line with conventions, where AR points at the binary and
ARFLAGS are the arguments to AR, while keeping compatibility with the
original style of using the AR variable.
Change-Id: I2b9797b9e5ab35929970487b3d1b8dddb9476c1f
Reviewed-on: https://review.haiku-os.org/c/haiku/+/3227
Reviewed-by: Adrien Destugues <pulkomandy@gmail.com>
* Tianocore is still in an early state for RISCV64 with a lot of work
needed around qemu support.
* u-boot however is working, and can load EFI binaries... so follow the
arm model for now. (EFI via u-boot, or EFI via EFI Bios)
Change-Id: I3dfde25db17b114aedce6faefc58d7556e17a46a
Reviewed-on: https://review.haiku-os.org/c/haiku/+/3176
Reviewed-by: Alex von Gluck IV <kallisti5@unixzen.com>
Reviewed-by: Adrien Destugues <pulkomandy@gmail.com>
* mmc might be not ideal. But raw is just a single partition and
anyboot is heavily x86. MMC will technically work for now to get
bootable images.
* floppyboot isn't used on EFI platforms, since we call two different
actions, just drop floppyboot altogether on EFI SD Images.
Change-Id: Idabb5483304007dd601bf8a1158036ffd24f73aa
Reviewed-on: https://review.haiku-os.org/c/haiku/+/3165
Reviewed-by: Adrien Destugues <pulkomandy@gmail.com>
Note it is not enough to fit, you also need to disable USB boot.
Change-Id: I5159c9ddebb242c4d4874d70430da6852073fdb4
Reviewed-on: https://review.haiku-os.org/c/haiku/+/3102
Reviewed-by: Adrien Destugues <pulkomandy@gmail.com>
Since the boot ROM API structure is declared with a custom alignment, we
simulate it with padding bytes around, and use aligntest.prg to verify
using ARAnyM + TOS/MiNT as we know how to link simple PRG files.
It now prints something to the screen then panics when initializing the
heap.
For now one must insert the loader manually into an existing floppy
image:
dd if=generated-m68k/objects/haiku/m68k/release/system/boot/next_m68k/haiku_loader.next_m68k bs=$((0x8000)) seek=1 of=next_floppy.img conv=notrunc
Change-Id: I06d74e9d85a352aab68dedce545bbe5fe9e990d5
Reviewed-on: https://review.haiku-os.org/c/haiku/+/2220
Reviewed-by: Adrien Destugues <pulkomandy@gmail.com>
Remove the InstallerInitScript (it does nothing) and the
InstallerFinishScript (it does too many things). Instead implement the
finishing directly in Installer. Separate writing the bootsector, so
that the "write bootsector" menu writes only the bootsector.
Fixes#16303
- libicule and libiculx do not exist anymore in newer ICU versions
(harfbuzz replaces them), but we didn't actually use them, so remove
them from the build feature and from the package dependencies
- Add namespace usage marcos since the newer ICU packages put ICU things
in a namespace, making it easier to have multiple versions of ICU used
side by side.
No functional change intended, but this makes it possible to build the
code with either ICU 57 (for gcc2) or 66 (for other architectures).
Change-Id: I90a9440898994459f8d6de922a3f363fbeddaaf4
Reviewed-on: https://review.haiku-os.org/c/haiku/+/2974
Reviewed-by: Alex von Gluck IV <kallisti5@unixzen.com>
Reviewed-by: Adrien Destugues <pulkomandy@gmail.com>
* boot.scr was growing past Jam MAXLINE and was causing segfaults
* Break out to tree, data/boot could be used for other arches
* boot.scr is getting a bit complex, but supports the old
u-boot haiku_loader, as well as u-boot starting our EFI loader.
Change-Id: I93a3167ab0bc78747c1d70fedd08595e9ac89662
Reviewed-on: https://review.haiku-os.org/c/haiku/+/2963
Reviewed-by: Adrien Destugues <pulkomandy@gmail.com>
* Stub out makebootable like on u-boot
* Place haiku_loader.efi at EFI/BOOT/BOOTXXX.EFI
* Generate boot.scr for u-boot + EFI
* haiku-mmc.image now attempts to auto-boot in qemu-system-arm
* Same code paths should roughly apply for arm64,riscv,etc
Change-Id: I563ebd77422d9e5dfcfeeedadcbc60471e8a57f4
Reviewed-on: https://review.haiku-os.org/c/haiku/+/2938
Reviewed-by: Alex von Gluck IV <kallisti5@unixzen.com>
Reviewed-by: Adrien Destugues <pulkomandy@gmail.com>
* This should 'fix' the arm build
* No longer parse FDT in bootloader, just pass ptr.
* The EFI loader doesn't load yet on arm
* It compiles though. Ship it!
Change-Id: I7c8ce588298dfaf4fba8054c6b6d9a92733b5943
Reviewed-on: https://review.haiku-os.org/c/haiku/+/2903
Reviewed-by: Alex von Gluck IV <kallisti5@unixzen.com>
Reviewed-by: waddlesplash <waddlesplash@gmail.com>
Change-Id: Ibce15f70e20ea010937edb0a297d220c4e5a7af2
Reviewed-on: https://review.haiku-os.org/c/haiku/+/2817
Reviewed-by: Alex von Gluck IV <kallisti5@unixzen.com>
Reviewed-by: waddlesplash <waddlesplash@gmail.com>
This is the partitioning system used on sparc machines.
Confirmed working with a Solaris install iso image.
Added to the haiku package for sparc and to haiku_extras for other
architectures.
Fixes#15638
Change-Id: I0584bef5e6a66eff9a33eb6675d5533cc9a45d1e
Reviewed-on: https://review.haiku-os.org/c/haiku/+/2709
Reviewed-by: Adrien Destugues <pulkomandy@gmail.com>
This pulls in the final translations for applications for R1/beta2,
and also the new HaikuWebKit.
Change-Id: I2bfb8933dcf35239f6962f8bee2dea507dec6fd5
Reviewed-on: https://review.haiku-os.org/c/haiku/+/2869
Reviewed-by: waddlesplash <waddlesplash@gmail.com>
The @image build is not used anymore and doesn't work. Use @nightly-raw
or @nightly-anyboot instead. The new method of release type/image type
configuration of profiles is more flexible and allows to manage the
various configurations a lot more easily for us. But the old profiles
were never formally deprecated.
Fixes#15963
Change-Id: I1c72f0e77bfbcda10502476e595f120280e8c7a4
Reviewed-on: https://review.haiku-os.org/c/haiku/+/2625
Reviewed-by: waddlesplash <waddlesplash@gmail.com>
Also remove the MINGW support, as it was far too incomplete.
This *should* work under case-sensitive NTFS, but instead,
it seems #14963 occurs. So perhaps there is a GCC bug
related to case-sensitive vs. case-insensitivity after all.
for Development: automake and autoconf require perl
for DevelopmentMin: makefile_engine requires make and mkdepend
Change-Id: Ica2bace17a233e2e589e139208e468870b1cc84e
Reviewed-on: https://review.haiku-os.org/c/haiku/+/2507
Reviewed-by: waddlesplash <waddlesplash@gmail.com>
Notable changes:
* jpeg replaced with libjpeg_turbo across the board.
* man replaced with mandoc.
* ilmbase merged into openexr.
* gnutls no longer needed in this set.
A few other packages unused in the local scripts were
also removed. Build fixes are in following commits.
Previously, all packages on the image, both activated and unactivated,
were in $systemPackages, so if a package actually in /system/packages
had a dependency in the Installer optional package area, the dependency
checking would see no problem but the generated image would be broken.
Now, packages going into /system/packages are treated separately
from those going elsewhere, and error checks added so the above
condition will not occur.
(I ran into this while working on the build-package upgrade
in the following commits.)
Should constitute a minor performance gain, with no functional change
(the kernel ELF loader does not do any semantic interposition; or
any interposition for that matter.)
Activating all these packages on live boot (especially live DVD where we
also have the write overlay eating up RAM) significantly increases
memory requirements for running Haiku, to the point that Installer may
fail to run. Move them outside the packages/ directory so they are not
activated.
Installer already skips the _sources_ directory when installing, and
lists the contents of _packages_ with checkbox to decide what to include
in the install (they are put in system/packages on the target disk).
Fix from previous version: the Haiku package was installed to /system
instead of /system/packages.
Fixes#15621.
Activating all these packages on live boot (especially live DVD where we
also have the write overlay eating up RAM) significantly increases
memory requirements for running Haiku, to the point that Installer may
fail to run. Move them outside the packages/ directory so they are not
activated.
Installer already skips the _sources_ directory when installing, and
lists the contents of _packages_ with checkbox to decide what to include
in the install (they are put in system/packages on the target disk).
Fixes#15621.
Change-Id: Ibfac14c43dbe708316a0d82ca1c9d49b5cba2aef
Reviewed-on: https://review.haiku-os.org/c/haiku/+/2157
Reviewed-by: Sergei Reznikov <diver@gelios.net>
Reviewed-by: waddlesplash <waddlesplash@gmail.com>
Change-Id: I23db3cbb57fea1f9346db9477f72bcc164794926
Reviewed-on: https://review.haiku-os.org/c/haiku/+/2282
Reviewed-by: Alex von Gluck IV <kallisti5@unixzen.com>
Reviewed-by: Adrien Destugues <pulkomandy@gmail.com>
* This is the bulk of the work. Anything else should be
minor cleanups and tweaking.
* riscv64 isn't a viable EFI platform yet.. just acting
as a stand-in to test a non-x86 EFI haiku_loader
Change-Id: Ib03de81e2b562e693987b86d7b4318209fb1c792
Reviewed-on: https://review.haiku-os.org/c/haiku/+/2256
Reviewed-by: Alex von Gluck IV <kallisti5@unixzen.com>
Reviewed-by: Adrien Destugues <pulkomandy@gmail.com>
Change-Id: Idc50cfee16db5f7c0dbea625a7739ad42b2d7bf0
Reviewed-on: https://review.haiku-os.org/c/haiku/+/2249
Reviewed-by: Alex von Gluck IV <kallisti5@unixzen.com>
Reviewed-by: Adrien Destugues <pulkomandy@gmail.com>
* "xorriso doesn't support much of the mkisofs options"
* Dropping the hfs map made our bootloader no-longer get
mapped as :tbxi which means qemu + Apple devices refused
to boot it.
* Switch to genisoimage which can generate the correct image.
(xorriso -as genisoimage doesn't work either)
Change-Id: Id71b97796f5004f6ddf6244644c51a5787f9bf8e
Reviewed-on: https://review.haiku-os.org/c/haiku/+/2241
Reviewed-by: Alex von Gluck IV <kallisti5@unixzen.com>
And remove Mouse, Keyboard and Touchpad.
Userguide and localizations will need to be updated.
Change-Id: I4543b2b63367cd13562c542610bad34b5934b103
Reviewed-on: https://review.haiku-os.org/c/haiku/+/2210
Reviewed-by: waddlesplash <waddlesplash@gmail.com>
Signed-off-by: Jaroslaw Pelczar <jarek@jpelczar.com>
Change-Id: Ie043af5b7471f626a1ffe100848151c832dcc439
Reviewed-on: https://review.haiku-os.org/c/haiku/+/1853
Reviewed-by: Alex von Gluck IV <kallisti5@unixzen.com>
Needed for the sparc port, allows to build elf2aout which uses err() and
errx(). Allows to build the sparc port from Haiku.
Change-Id: Ia14dd9b1be1c03b36634a675f1a51eeac8d4aacf
Reviewed-on: https://review.haiku-os.org/c/haiku/+/2129
Reviewed-by: waddlesplash <waddlesplash@gmail.com>
- Factor in types changes (introduction of intptr_t)
- Align JamFiles syntax with in progress architectures (arm/sparc)
- Xorriso doesn't support much of the mkisofs options (anymore ?)
- (After a correct bootstrap) one should be able to build @minimum-raw and haiku-boot-cd again
Change-Id: I4f779ad8f2210389fa9b7f7c0a98c3652a64c257
Reviewed-on: https://review.haiku-os.org/c/haiku/+/1983
Reviewed-by: François Revol <revol@free.fr>
* Add a link to the Quick Tour to the desktop.
* Remove the Welcome page from desktop. We don't want to clutter
the user's desktop more than necessary. As "Home" page of
WebPositive, it's still very visible.
* Mention the Quick Tour in the Welcome package description.
* Add a "quicktour" script similar to the welcome/userguide
that opens the online version if it's not installed locally.
* Add icons to the userguide and quicktour scripts. Fixes#14706.
* Add bookmark and launcher for the Quick Tour.
Adjust the AddFileDataAttributeRule to create its temporary file in
the "common" architecture, the file is not architecture specific.
Add a rule PrepareScriptWithIcon in src/data/bin/Jamfile to assign
an icon and make the script executable.
Change-Id: Ia7604ff4715a5aaf9a645c1b3333a954d6a4dafc
Reviewed-on: https://review.haiku-os.org/c/haiku/+/1924
Reviewed-by: Adrien Destugues <pulkomandy@gmail.com>
So many Jamfiles to search through...runs also, but there
are lots of graphical glitches
Change-Id: Ibf9e64566a5b8c5742792ac9b1b0f9ccc6693c8d
Reviewed-on: https://review.haiku-os.org/c/haiku/+/1753
Reviewed-by: waddlesplash <waddlesplash@gmail.com>
The "exec" tool can only handle one command with environs set at
the beginning of the line, so now we set the ADD_BUILD_COMPAT...
in this format. This also seems to be a general performance
improvement to builds using real shells, too.
Change-Id: If4b3117651b5475039d5e8116cd3de398582290a
This makes pkgman functional in minimum-profile images.
Change-Id: I3578886743fecbf76779ac1b4b76762d8ce1be3d
Reviewed-on: https://review.haiku-os.org/c/haiku/+/1715
Reviewed-by: waddlesplash <waddlesplash@gmail.com>
Now provided in the tnftp package.
Change-Id: I862b1ff98586aa0e5a9418cf26e30b7136140249
Reviewed-on: https://review.haiku-os.org/c/1641
Reviewed-by: waddlesplash <waddlesplash@gmail.com>
Change-Id: If11a892665d08f61c46b5a6a5b4bf0453225c3ee
Reviewed-on: https://review.haiku-os.org/c/1533
Reviewed-by: Alex von Gluck IV <kallisti5@unixzen.com>
* haiku_loader.u-boot doesn't fit in fat32 like haiku_loader.ub
* Adjust when writing. Update u-boot scripts to expect new filename
* Shrink loader partition to 32M, add our filesystem to end
Change-Id: I62936526a7dea2c41e26a7c0f9e05a368622a6a3
* For tracking, there are *mega* hacked together using
llvm's linker and functionality isn't a sure thing.
* Thanks waddlesplash for the sketchy changes :-)
* Hopefully gets non-bootstrap arm builds working again
and let us work on the toolchain without blocking arm
development.
Change-Id: I0617ed83cc757d098e6464222405f75eed91196e
I am using this to use clang+lld for linking on ARM builds,
which seems to be more tolerant than binutils ld is, and
gets the build a bit farther for now.
