Work in progress: fetch next partial downloaded message.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@40504 a95241bf-73f2-0310-859d-f6bbb57e9c96
handling:
* package attributes are now compatible with the low level attribute
handling of other HPKG attributes (such that 'package dump' now shows
package attributes, too)
* dropped type names from hpkg format, the attributes were identified
by IDs already and this simplifies the code considerably. Type names
are now handled in BLowLevelPackageHandler only.
* instead of rolling their own mechanism, high-level package attributes
handling is now implemented via a corresonding set of
AttributeHandler-subclasses
* adjusted package writer to only write package attributes that are
needed (empty ones are left out)
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@40466 a95241bf-73f2-0310-859d-f6bbb57e9c96
* actually write the checksum
* compress the repository info archive, too (handle it as separate
section)
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@40426 a95241bf-73f2-0310-859d-f6bbb57e9c96
* typedef base classes as 'inherited' and use that instead of the
explicit base class name
* remove superfluous scopes in case blocks
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@40420 a95241bf-73f2-0310-859d-f6bbb57e9c96
* fleshed out RepositoryWriterImpl
* renamed BRepositoryHeader to BRepositoryInfo (in accordance with
BPackageInfo)
* adjusted BRepositoryInfo to be able to parse itself from a
driver_settings file
* added package_repo binary (only 'create' works as of yet)
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@40405 a95241bf-73f2-0310-859d-f6bbb57e9c96
Accounts are now stored in a separate file. Previously they where somehow magically assembled from the chain ids. Now its possible to remove a account temporary by removing the account file form the account folder.
Each account could have an inbound protocol, an outbound protocol and some filters.
Mails are now associated with an account and not with a chain. This required to replace the chain id attribute by an account attribute.
Replace BMailFilter and BMailChain by a less general approach. Basically the chain had a list of filters and call the ProcessMailMessage for each filter. This made it sometime difficult to understand what is going on, e.g. sometimes a filter used information gathered by another filters. The new MailProtocol and MailFilter classes are calling more dedicated hook functions, e.g. HeaderFetched or MessageReadyToSend.
As before all MailProtocol's (plus their filters) are running in their own thread.
Cleaned up the error and status window a bit. Abstracted the interface to these windows. Should be easy to write a BNotification api back-end now.
Parsing of mail headers is much faster now. Fetching the headers of a large mailbox takes ~min and not ~hour now! Initial checkout time is in the same order like Opera. The problem was the massive use of fgets in parse_header (mail_util.cpp) now the complete header is read in one go. Furthermore, only interesting fields are extracted.
Remove some unused files, BeOS relicts... Feel free to translate the mail server and remove the own language system (headers/private/mail/MDRLanguage.h).
Sorry for the remaining old (and new) coding style issues, sometime just ignore them, to many :(
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@40397 a95241bf-73f2-0310-859d-f6bbb57e9c96
to create a package that refers to a license that is not a system
license or contained in the package
* added package-info flags (currently only approve_license and
system_package)
* adjusted package-reader/writer and pkgman accordingly
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@40393 a95241bf-73f2-0310-859d-f6bbb57e9c96
* PackageWriterImpl no longer accesses members of WriterImplBase
directly, but uses getters/setters instead
* package attribute registration has been moved from PackageWriterImpl
to WriterImplBase, as it will be used in the same manner by the
RepositoryWriter
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@40388 a95241bf-73f2-0310-859d-f6bbb57e9c96
* pulled commonly useful parts out of PackageWriterImpl into
WriterImplBase
* moved CachedStringTable and related methods into a separate class,
StringCache, in order to support having more than one string cache
per package file
* made package attribute section use a string cache, too, as that's
going to be very useful for repositories
* instead of writing package attributes directly, we now collect
corresponding PackageAttributes and write those later
* adjusted package reader accordingly
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@40376 a95241bf-73f2-0310-859d-f6bbb57e9c96
fixed size flag at once. Not sure if this can be merged into one of the
existing GetInfo() variants without breaking binary compatibility.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@40374 a95241bf-73f2-0310-859d-f6bbb57e9c96
types and defines of HPKG
* added header, magic and version for haiku repository format
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@40370 a95241bf-73f2-0310-859d-f6bbb57e9c96
section access into the SectionInfo structure, of which
PackageReaderImpl now keeps two instances and a pointer to the
current of these two
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@40359 a95241bf-73f2-0310-859d-f6bbb57e9c96
* added kernel-compatible datatypes for reading package info attribute
values (PackageInfoAttributeValue.h) - these will be used at a later
stage by the package-fs to transport those attributes to userland
when asked to do so (by ioctl)
* implemented parsing of package info attributes in PackageReaderImpl
* added support for compressed package attribute section to
PackageReaderImpl
* completed the writing of package info attributes in PackageWriterImpl
and fixed a couple of bugs exposed by parsing
* adjusted 'package list' to show the package info attributes as they
are found
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@40354 a95241bf-73f2-0310-859d-f6bbb57e9c96
* fixed a couple of copy'n'paste bugs during parsing of resolvable
expression lists (they were all added as 'requires')
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@40353 a95241bf-73f2-0310-859d-f6bbb57e9c96
and BPackageResolvableExpression
* switched GetAsString() to a AsString() as that's much more convenient
and nothing can go wrong anyway
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@40347 a95241bf-73f2-0310-859d-f6bbb57e9c96
logs (the OpenTracker license doesn't apply since NaturalCompare
was never part of OpenTracker).
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@40341 a95241bf-73f2-0310-859d-f6bbb57e9c96
but publish that info through a BPackageWriterListener
* adjusted 'package create' to print a package summary by default and
more verbose info upon request.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@40332 a95241bf-73f2-0310-859d-f6bbb57e9c96
* FDCloser is private, so it should live in BPackageKit::BHPKG::BPrivate
* adjusted 'package' binary to no longer use FDCloser (trivial)
* minor cleanup in command_extract.cpp
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@40329 a95241bf-73f2-0310-859d-f6bbb57e9c96
* added my own copyright to a couple of files that I changed
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@40321 a95241bf-73f2-0310-859d-f6bbb57e9c96
public and private API (still far from ideal, but a start):
* moved several HPKG-classes into the public namespace BPackageKit::HPKG
* added fImpl-wrappers around PackageReader and PackageWriter to hide
most of the gory details
* adjusted 'package'-binary and packagefs accordingly
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@40320 a95241bf-73f2-0310-859d-f6bbb57e9c96
* split BPackageResolvable, BPackageResolvableExpression
and BPackageVersion into separate files
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@40316 a95241bf-73f2-0310-859d-f6bbb57e9c96
This fixes#7022 and is mostly based on the patch attached to that ticket, with
these changes:
- The patch was adding this to the private _TextInput_ class, not BTextView.
- The patch had a Clear menu item too. I removed that due to the different
semantics between Clear in a BTextView and in a TextInput. The former just
clears the selection where the latter clears the whole view.
We could later add a virtual callback for adding menu items to this context
menu which could be used to add Clear with the two semantics in each class
(this is mainly needed for the enabling logic...each class could handle a clear
message in its own way.) This callback could also obviously be used for other
things, like a spell-check menu or whatever an application would want to add.
Since BTextView has 10 free virtual slots it seems reasonable to add.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@40305 a95241bf-73f2-0310-859d-f6bbb57e9c96
* added class BPackageInfo, which contains packaging attributes of
a package (the values relevant for package management)
* implemented parser (mostly) for reading a BPackageInfo from a config
file (.PackageInfo) in order to pass them on to the PackageWriter
when creating a package
* pulled hpkg-related stuff from bin/package into the package kit
* adjusted packagefs-Volume to skip .PackageInfo files when populating
the mountpoint, as those files shouldn't appear as part of an
activated package
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@40301 a95241bf-73f2-0310-859d-f6bbb57e9c96
* rip BRepositoryHeader out of BRepositoryConfig and add support
for it to BRepositoryCache
* implement repository removal
* some minor cleanups
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@40290 a95241bf-73f2-0310-859d-f6bbb57e9c96
* drop 'Haiku' namespace
* rename 'Package' namespace to 'BPackageKit'
* renamed all public classes to begin with a 'B'
* renamed BPackageKit::Roster to BPackageKit::BPackageRoster to not
clash with the BRoster from the application kit.
* fix some instances of public headers including private ones
Some functional changes, too:
* JobQueue now removes and deletes dependants of failed jobs
automatically
* JobQueue supports waiting for jobs to become runnable
* added a couple of InitCheck() methods where they make sense
and invoke those in users of these classes
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@40287 a95241bf-73f2-0310-859d-f6bbb57e9c96
The solver part has been refactored in this way that both solver can be used with the same layout specifications. The active set solver is default now; the performance is not as good as lp_solve, though.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@40285 a95241bf-73f2-0310-859d-f6bbb57e9c96
