* check specific node ids for nodes declared as inputs which are really beepers
* when unmuting/setting amp on the input amplifier, iterate on each input instead of only the first one
* also unmute/set amp on the output and input amplifiers for the input and output paths, respectively
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@28683 a95241bf-73f2-0310-859d-f6bbb57e9c96
be used.
* Added tty::ref_count. Each cookie keeps a reference. Only when a
cookie is freed the reference is surrendered. A tty is considered used
as long as it is still referenced. This allows to access a tty through
the cookie, even if it already has been closed.
* Fixed tty_deselect(). It was keeping registered select events when
called after the cookie has been closed. The referenced select_sync
structure would become invalid and later attempts to send select
notifications for the tty could crash. Fixes#3126.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@28651 a95241bf-73f2-0310-859d-f6bbb57e9c96
I just added a check in bmtphy_probe() as ENXIO is negative on Haiku.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@28597 a95241bf-73f2-0310-859d-f6bbb57e9c96
acquire_sem_etc(), but treat it as an error instead. This allows
to kill device polling threads in the input_server and prevents
a busy loop in the kernel then. Before the input_server was shutting
down devices upon quit (happens only when restarting it), this
busy loop could also be observed, since then polling threads would
be quit on exit of the team.
* Supply B_INFINITE_TIMEOUT for the MouseDevice instead of 0. Does not
change anything, but was probably not intended.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@28407 a95241bf-73f2-0310-859d-f6bbb57e9c96
* The first problem was introduced by myself, when I added deleting the
transfer semaphore in HIDDevice::Close(). Obviously, I should (re)create it
in Open() then, or it won't work another time. (Open() is now the only place
where it's created.)
* The second problem was when transfers have already been scheduled the
last time the device was open, but never triggered yet. We need to reset the
fTransferUnprocessed flag, or we won't schedule another transfer but
wait on the transfer semaphore anyways in Control(). I also added
canceling the usb transfers with the stack in Close().
* The remaining problems were specific to the KeyboardDevice, the repeat
key stuff needs to be reset in Open(). I also added unsetting the repeat
key when the key release is detected, but this should have already worked,
because the semaphore timeout was reset to B_INFINITE_TIMEOUT.
One can now "/system/servers/input_server -q" and everything will be back
in working order. There may be some remaining problems in the Wacom driver
which I have not yet looked at.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@28368 a95241bf-73f2-0310-859d-f6bbb57e9c96
on it are unblocked and get an error.
* Make fOpen volatile to prevent unwanted caching effects when checking it from
different threads. (?)
* Check IsOpen() in the KeyboardDevice class in more acquire_sem_etc() return
cases, analogous to the MouseDevice class.
I am still getting a problem when relaunching input_server with the input_server
add-on thread that ioctl()s on a USB keyboard fd, which should have never fired
because it's a fake device from a KVM. After the first input_server instance is
gone, this thread keeps on busy looping in acquire_sem_etc()->switch_sem() from
within the ioctl() of the KeyboardDevice usb_hid driver. Still on it.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@28350 a95241bf-73f2-0310-859d-f6bbb57e9c96
a panic when ejecting a disc, since updating DMAResource isn't implemented
yet...).
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@28348 a95241bf-73f2-0310-859d-f6bbb57e9c96
parts of the init sequence if that's not the case anyways. This correctly
initializes the engine lock and a few other things, fixing the deadlock in
ticket #2893. This also seems to result in somewhat improved graphics
performance, at least on my X800.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@28295 a95241bf-73f2-0310-859d-f6bbb57e9c96
changes on auich.settings are now taken into account when restarting media_server
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@27972 a95241bf-73f2-0310-859d-f6bbb57e9c96
* The hardware cursor is now disabled at 640x480 with a Virge VX (before it
was just invisible).
* EDID info can now be read for all S3 chips.
* For the Savage IX, Savage MX, and SuperSavage chips the display is no
longer expanded to fill a laptop LCD display when the mode resolution is
less than the size of LCD display.
* Savage IX, Savage MX, and SuperSavage chips will now display mode
1400x1050 on a 1400x1050 laptop LCD display. Previously the display was
blank at that resolution.
* Previously about half the Savage chips would not draw properly at
1400x1050. That is, the image was badly skewed and unusable. All of
them now draw properly at 1400x1050.
* Some code was reorganized to remove unnecessary and redundant code.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@27863 a95241bf-73f2-0310-859d-f6bbb57e9c96
supports many Realtek based NIC which our own driver doesn't support
(for example the RTL8101E). Thanks! Not added to the image yet, since it
causes some problems on my laptop (but could well be caused by the
freebsd compat layer, or by the scheduler)
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@27843 a95241bf-73f2-0310-859d-f6bbb57e9c96
case the cd_driver_info::io_scheduler field is not initialized and we
shouldn't try to access it. No idea why, but this only crashed with
the gcc4 build.
* Fixed warning with tracing enabled.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@27762 a95241bf-73f2-0310-859d-f6bbb57e9c96
This should enable internal MII PHY detection again, thanks to Siarzhuk for
finding this!
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@27702 a95241bf-73f2-0310-859d-f6bbb57e9c96
interfaces, endpoints and generic descriptors.
* Add getter for active interface index and simplify the count operation as
it isn't misused to also get interface descriptors anymore.
* Refactor out some common code into helper functions.
* Adapt the USBKit to the changed/new interface.
* Change how alternate interfaces are exposed by USBKit by providing normal
BUSBInterface objects for alternate interfaces that can easily be examined
and used.
* Make BUSBInterface class aware of its alternate index and use the alternate
aware usb_raw functionallity to build the endpoint and descriptor lists.
* Add ActiveAlternateIndex() to find out what alternate is currently active.
* Style cleanup of the USBKit classes, use std::nothrow everywhere and check
all allocations. Simplify some code by removing optimization where the benefit
is questionable.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@27409 a95241bf-73f2-0310-859d-f6bbb57e9c96
32 bits data
* Echo audio driver doesn't support 24 bits in a 32 bits container as proposed by the media kit. We just manage 24 bits as 32 bits samples.
* The main benefit of this change is that the hda driver is now working with 24 bits samples (and 192khz).
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@27362 a95241bf-73f2-0310-859d-f6bbb57e9c96
* check if the device is still opened when waiting for data
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@27310 a95241bf-73f2-0310-859d-f6bbb57e9c96
http://www.SpringDaemons.com/stas/if_ae-1214569185.tar.bz2
(This is the wired NIC on the Asus EEE PC!)
NOTE: It is not in the image because it currently still crashes, will look into that soon.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@27290 a95241bf-73f2-0310-859d-f6bbb57e9c96
dynamically assign one when needed. Under the assumption that in most
cases a bounce buffer isn't needed, we can thus prepare a lot more
operations.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@27185 a95241bf-73f2-0310-859d-f6bbb57e9c96
* Removed B_GET_ICON support from scsi_disk, and scsi_cd. This won't be
necessary anymore soon.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@27029 a95241bf-73f2-0310-859d-f6bbb57e9c96
- B_GET_ICON_NAME: returns the name of an icon. This will then be read from
a predefined location on disk (not yet implemented). This would also allow
to add specifiers like "-boot", or "-fat|bfs|ntfs|...", and have special
icons for those.
- B_GET_VECTOR_ICON: retrieves the vector icon of a device, if any.
* get_device_icon(BBitmap*, ...) now supports other color spaces than B_CMAP8.
* Added get_device_icon(), BPartition::GetIcon(), and BVolume::GetIcon()
variants that can also retrieve the icon data directly (like
BNodeInfo::GetIcon()).
* Reenabled the previous BPartition::GetIcon(), based on a patch by
Justin O'Dell - this fixes#1391.
* Tracker's MountMenu class now uses B_RGBA32 icons, instead of B_CMAP8.
* Added vector icon to scsi_disk, and scsi_cd. The former doesn't have any
special removable icon, though.
* Header cleanup, added/updated license, whitespace cleanup.
* Marked deprecated/obsolete driver ioctls in Drivers.h.
* Removed OpenBeOS namespace in the headers I touched that still had them.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@27001 a95241bf-73f2-0310-859d-f6bbb57e9c96
our dma_restrictions structure (but we're using blocks instead of bytes,
since unlike the block size, the restrictions attributes are constant).
* We might want to use blocks for the dma_restrictions structure as well in
the future...
* Fixed another bug in the device_node variant of DMAResource::Init(): the max
segment size was specified in blocks as well.
* Removed the "hardcode" block_io module and header.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@26973 a95241bf-73f2-0310-859d-f6bbb57e9c96
