* IvyBridge or higher can auto-train.
* Linux doesn't use this feature, however
manual FDI link training is *really*
complex... lets try auto-training first.
* I really hope we can kill head_mode some day
* Break pll code out from mode code
* The LVDS and Digital are smooshed together and
likely need broken apart.
* No impact to non-ValleyView chipsets
* Bump some register locations for VLV
* Only have HDMI port to test with on my ValleyView GPU
and our driver seems to be missing all HDMI and
sideband functionality.
* As ValleyView chipsets seem to be UEFI only, we don't
have VESA fallback, so this shouldn't cause regressions.
(unless we get UEFI framebuffer support)
Intel changed the PCH interrupt bits between Sandy Bridge and Ivy Bridge
to make space for the 3rd display pipe. Take this into account and check
for the correct bits on the newer devices.
Fixes#11522.
* These aren't tested, but since we go off of DCE
versions for a lot of stuff, they may work.
* AMD doens't include market names in their drivers
anymore, so if we want to label them it will take
additional work.
* This is less pretty, but we need access to the connector
to find the HPD gpio pin mask on the card.
* dp_aux communications seem to work again.
* If you have a DisplayPort item attached to your card you
may want to just unplug it at this point. We attempt DP
link training and it fails. This failure will also cause
other monitors to not function as app_server still isn't
multi-head aware (#10486)
https://github.com/druga/haiku-stuff/tree/master/intel_extreme
Rebased against current sources.
* The BIOS video mode sometimes reports a scaled mode instead of the
physical panel dimensions. Get the data from the VBT table as well, and
use it if the reported resolution is bigger.
* On first boot, force the panel native mode so the user doesn't have to
set it manually.
* Only allow a single head at a time on i855gm, as the card can't drive
both heads at the same time.
* Detect when a new requested mode is the same as the current one, and
skip modesetting in that case. Avoids screen flickering when changing
workspaces.
* Fix some cases of misdetecting which pipes to enable
* They are all over the place.. I give up
* Going off of engineering names and DCE is more accurate
* A lot of this info came from the x.org wiki
* I'd like to transition some of the engineering
name checks to use DCE versions.. they tend to be more
accurate and exact. (in some cases we can't, but most of
the time we can)
* edid1_detailed_timing_raw was missing
a field which threw off the sync bits.
* The result was the monitor will receive
a different sync polarity than it requested.
Most monitors handle this, but it is still
a bug
