* If we have a configured network, then we always try to connect to it
as soon as the interface has been brought up.
* If we don't have a configured network and are auto configuring, we
use the AutoconfigLooper to also do initial auto joins.
* Before issuing auto joins we need to wait for scan results to come
in, so we watch for corresponding messages.
For now auto joining is a one shot attempt as the infrastructure to
properly tell reasons for scans apart is not yet there.
* Various compilation fixes.
* Fixes to the FreeBSD compatibility layer (from comparing the x86-
specific bits with the equivalent amd64 sources in FreeBSD).
* Compile all the Ethernet drivers except for sis900 and wb840, these
require a bit more work to fix (will file a ticket soon). Tested
ipro1000 and rtl81xx, no issues.
BNetworkRoster::{Count|GetNext|Add|Remove}PersistentNetwork() as it fits
better (thanks Philippe for the heads up).
* Implement the backend for these functions in the net_server and also move
conversion of the wireless_network based format into the settings based format
there.
* Implement removal of a network from the settings and make adding a new network
with the same name replace the old one instead of just adding multiple ones.
Might need to change this in the future depending on how we want to handle
multiple networks with the same name (i.e. distinguish based on BSSID or
similar).
* Fix apparent oversight that caused configured networks _not_ to be used in the
auto join attempt.
* Remove auto joining open networks. I've been bitten by that more than once now
because we happen to have an open network in the neighbourhood that I now
accidentally used to transfer quite a bit of (unencrypted) stuff before
noticing... In the future, one will instead have to explicitly join an open
network once and store that config. Note that the driver will actually still
auto-associate with open networks due to how things are set up currently.
Note also that the auto join will fire join requests whenever there's a
disassociation event, so you might see spurious join dialogs when the
wpa_supplicant actually just re-establishes the connection.
* Make join requests async again. Instead of waiting for a synchronous reply of
the wpa_supplicant we instead return success when the request has been sent.
While the API call might still be made synchronous again in the future, the
net_server should really not block on an external application. In the case of
the wpa_supplicant we would otherwise deadlock when using the new
*PersistentNetwork() API after a successful join, and in other cases we might
just unacceptably delay other calls.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@42816 a95241bf-73f2-0310-859d-f6bbb57e9c96
sdl_e_type in network byte order, causing such a socket not to receive
anything.
When working around that by not using htons() on bind, sending would then fail
on such a socket because the byte order is actually required to be swapped
there.
* Extend the comment for the B_NET_FRAME_TYPE macro to document that the input
types are supposed to be in host byte order to avoid future confusion.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@42357 a95241bf-73f2-0310-859d-f6bbb57e9c96
Integrated the classes in the Network Kit (libbnetapi.so). Only the foundation
classed BUrl, BUrlContext, BNetworkCookie, BNetworkCookieJar and the private
HttpTime code is currently compiled. The BUrlProtocol currently contains some
misplaced BUrlProtocolHttp specific stuff, and the HTTP stuff itself has a
dependency on libcrypto and should live in an add-on instead. I've sprinkled
some TODOs in the code, and I've done some renaming compared to the last
version of the GSoC patch. Any help to bring this further along is appreciated.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@39161 a95241bf-73f2-0310-859d-f6bbb57e9c96
the missing notifications.
* Renamed ieee80211_haiku.c to .cpp, and made it compile (this part requires
the updated GCC2, as it uses the ISO-C varargs macros).
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@38378 a95241bf-73f2-0310-859d-f6bbb57e9c96
global name space, and have ugly identifiers for nothing :-)
* Added a flags field to struct ifaliasreq. Added flags to mark an alias that
is currently being configured, or has been automatically configured.
Those flags aren't used yet, but they will replace IFF_CONFIGURING and
friends.
* Implemented deleting addresses only from interfaces via ifconfig.
* Added more command aliases for delete to ifconfig ("del", and "delete", for
more consistency with route).
* Fixed control_routes() to only release a reference to an address if it
actually got one before.
* If an interface address is deleted, its routes are now removed as well.
* InterfaceAddress now holds a reference to its interface as planned.
* Implemented removing interfaces. Works quite nicely.
* When downing an interface, all of its routes are now removed. When upping
it again, at least the default routes are added.
* datalink.cpp's get_interface_name_or_index() leaked a reference to the
interface found.
* SIOCAIFADDR would also leak a reference when new addresses were added.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@37872 a95241bf-73f2-0310-859d-f6bbb57e9c96
send_datagram() to send_data().
* Renamed DatagramSocket::SocketEnqueue() to EnqueueClone(), SocketDequeue()
to Dequeue().
* Ordered the methods in ProtocolUtilities.h according to their declaration.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@37870 a95241bf-73f2-0310-859d-f6bbb57e9c96
type one wants to receive. Changed ipv6_datagram to use that (but note that
it currently does not compile).
* Header cleanup.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@37868 a95241bf-73f2-0310-859d-f6bbb57e9c96
interface - this caused quite a number of changes.
* Network interfaces, and its addresses are now reference counted (not yet
complete, though, InterfaceAddresses need to hold references to their
interface as well).
* There are two known regressions of this commit that I will fix later:
- you cannot remove interfaces anymore
- IPv4 multicast was broken anyway, but now it's disabled, too.
* Moved a device_interfaces.cpp|h out of interfaces.cpp.
* The datalink layer chain is now instantiated per domain per interface,
not just per interface anymore.
* When a buffer reaches the network layer, it has no known interface yet, ie.
the ipv4|6|whatever modules need to set this manually.
* Added more debug output, and some new debugger commands, the control option
is now printed in clear text.
* Added hash_address() function to the address modules. Added "const" to
set_to_defaults() where needed.
* Fixed net_buffer's restore header functions offset use as reported by Atis.
* Improved buffer dump output, use the domain module to print the address if
available.
* Moved net_buffer::type into the union, as it's not needed by the upper layers
anymore.
* Moved IPv6 specific code from {add|remove}_default_route() to where it
belongs, but disabled it for the time being.
* Completely discarded useless ipv4_datagram module.
* Added ping6 to the build.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@37794 a95241bf-73f2-0310-859d-f6bbb57e9c96
do not get the '_' prefix, only private ones do).
* Added a "peek" argument to SocketStatus() (and generally renamed "clone" to
"peek" where it made sense).
* Implemented the base version of SocketStatus() to return the actual socket
error. This enables returning ICMP errors back to the socket user.
* Other minor cleanup.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@37712 a95241bf-73f2-0310-859d-f6bbb57e9c96
upper layers: you use the store_header() function to mark the header you want
to preserve. All subsequent remove_header() calls won't claim the actual
data, but only move the node start around.
* This header can then be restored by restore_header(). However, a call to
prepend_data() will destroy the stored header. Also, if remove_header() cuts
off a whole node, restoring the header won't succeed anymore.
* Discarded the no longer needed net_buffer::network_header field.
* Also discarded the hoplimit field which temporarily breaks the IPv6 build
until Atis reworks it.
* IPv4 now also dumps the IP header in the send path if debug output is enabled.
* icmp_error_reply() might be called so early that the net_buffer's addresses
do not point to the reply address; this is now detected, and the addresses are
taken out of the IP header in that case.
* Improved dumping the net_buffer to also include its address, and flags.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@37688 a95241bf-73f2-0310-859d-f6bbb57e9c96
2007), and Yin Qiu (GSoC 2008). And even though I needed to rewrite pretty
much all of it because of the countless bugs and problems it had, it still
shares the same architectural problems of introducing a domain dependent
error mechanism to the upper layers, and needing the
net_buffer::network_header hack. This I will rework later.
* net_buffer's append_size(), and prepend_size() will now gracefully handle
buffers without a data node.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@37647 a95241bf-73f2-0310-859d-f6bbb57e9c96
directly here), I made only a few style changes:
* introduced 'has_broadcast_address' field in
struct net_address_module_info
- REVIEW: the name, and the status of this field for UNIX and L2CAP
families
* ipv6 address family support
* ipv6 address printing
* ipv6 protocol support
* ipv6 multicast support
- TODO: add and remove multicast routes in a more proper way
- TODO: support MLD
* ipv6 datalink protocol support
* icmpv6 protocol support (EchoRequest and EchoResponse messages)
* ipv6 neigbor discovery protocol support
(Advertisement and Solicitation messages)
- TODO: only the very basic support is present,
the protocol state machine is by no means completed
- TODO: replying to Solicitation does not work too good ATM
(visible, when pinging Haiku from outside)
* added Jenkin's hash algorith
* minor changes in existing IPv4 code - cleanup function
ipv4_get_loopback_address(), written by myself
* add tests: raw, udp, tcp/udp, mullicast sender
* add 'hoplimit' field in struct net_buffer
- TODO: this is just a hack, more generic approach would be better.
* add 'receive_data' function pointer in
struct net_datalink_protocol_module_info
- TODO: this is also more like a hack, to support information
passing from ICMPv6 to IPv6_datagram level.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@37604 a95241bf-73f2-0310-859d-f6bbb57e9c96
* fix connecting to INADDR_ANY work for tcp (effectively will
connect to INADDR_LOOPBACK)
* add same behaviour to udp
* move some ipv4-specific code out of tcp into ipv4 address module
* bind() and connect() now reject addresses from non-matching
families
* myself: minor cleanup in udp.cpp with respect to 80 chars limit
Closes#5716 - many thanks!
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@36192 a95241bf-73f2-0310-859d-f6bbb57e9c96
* Instead, added a new function is_local_link_address() which returns the
interface with the matching link level address, and can additionally test
for unconfigured interfaces.
* Merged the two versions of fill_sockaddr_in() together in ipv4.cpp.
* ipv4 now uses the new is_local_link_address() function to figure out whether
the received packet should be processed or not. This should fix a few DHCP
issues with multiple and configured interfaces as recently explained on the
mailing list.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@34466 a95241bf-73f2-0310-859d-f6bbb57e9c96
Bosii is a transcription of 802.11. It is a work-in-progress title to
point out parts of the wlan stack which are still in an experimental state.
For example the control codes within bosii_driver.h are moving targets.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@34349 a95241bf-73f2-0310-859d-f6bbb57e9c96
* added new protocol method process_ancillary_data_no_container() that does not
need a container to fill the cmsghdr data.
* Added support for the IP_RECVDSTADDR option using this call.
* Implemented support for IP_MULTICAST_IF.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@31585 a95241bf-73f2-0310-859d-f6bbb57e9c96
pings to fail (raw socket initialization) after r31079.
* Further cleanup.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@31238 a95241bf-73f2-0310-859d-f6bbb57e9c96
socket could be acquired, ie. when its reference count is 0, it cannot be
acquired anymore. This requires the protocol to do proper locking, though.
* The TCP EndpointManager now checks the return value of acquire_socket(), and
only returns the endpoint if that succeeded.
* This fixes bug #2197.
* Minor cleanup.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@30363 a95241bf-73f2-0310-859d-f6bbb57e9c96
* This fixes the problem when a socket changes something with regards to its
parent.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@30000 a95241bf-73f2-0310-859d-f6bbb57e9c96
- This means that buffers with a initial size of 0 work now.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@29006 a95241bf-73f2-0310-859d-f6bbb57e9c96
- Default buffer size is now set to 1 instead of 0, which would cause the
construction without a given size to fail.
- Added copy constructor.
- Changed _GrowToFit() to have a boolean parameter to indicate if we want
to resize the buffer to an exact size. Used by the copy constructor.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@28924 a95241bf-73f2-0310-859d-f6bbb57e9c96
- Will be used by the new (R5 compatible) NetBuffer class.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@28918 a95241bf-73f2-0310-859d-f6bbb57e9c96
old invalid user listeners yet, though (ie. if a team dies).
* Implemented userland network monitor functions.
* Added a few notifications to the network stack, even though this part isn't
complete yet (especially notify_interface_changed()).
* Added optional debug output to the notifications module.
* Added the module to the image, it basically works now (tested).
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@28825 a95241bf-73f2-0310-859d-f6bbb57e9c96
