* Removed the mp3_reader and mp3_decoder from the image and from
the source tree even. The mpeg123lib based decoder was crashy,
since the lib didn't cope with bad input data too well, whatever
the reason, but bad input can also be a specially crafted file.
I didn't see the value in keeping two decoders around that use
a third party library as backend. While reading in the mp3_decoder
code, I even saw that it used global variables in the mpeg123 lib
to figure out framerate and channel count, after decoding a bit of
input. Obviously this has concurrency issues.
* Removed the mp4_reader from the image. It is native code, and should
perhaps be preferred over imported code, but I don't have the
resources to look into it, and David doesn't seem to have the time
either. There are basically three types of problems with the
native mp4 reader: 1) It is way too CPU intensive. I have many HD
files that don't play at all, since there is not enough time left
for actual decoding. 2) Seeking leaves a lot of visual artifacts
(with the very same decoder plug-in), since there seems something
wrong either with finding true keyframes, or with flushing buffers
correctly. And 3) very often audio stops working at all after
seeking. Sometimes a keyframe is returned for audio which is very
far away from the wanted frame, which currently triggers bad
behavior in the audio producer node in MediaPlayer and can even
crash the media_addon_server. With the ffmpeg based mp4 reader,
none of these problems exist: Seeking is perfect, no artifacts,
CPU load is low enough for pretty much all HD clips I tested with,
and audio always works and is always in perfect sync with the video
after seeking.
If there are regressions after this commit at all (I tested a lot of
files), then I anticipate only that the ffmpeg plugin does not advertise
support for files it could actually handle (i.e. easily fixable). In
those cases hopefully a test stream can be made available. If the
native mp4 reader is improved to the point that it works as well as
the ffmpeg mp4 demuxer, we can easily switch it back, but for now, users
will prefer reliable playback.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@38403 a95241bf-73f2-0310-859d-f6bbb57e9c96
* Since they all work reasonalbly well, add them to the default image. (beOs had them after all)
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@37864 a95241bf-73f2-0310-859d-f6bbb57e9c96
interface - this caused quite a number of changes.
* Network interfaces, and its addresses are now reference counted (not yet
complete, though, InterfaceAddresses need to hold references to their
interface as well).
* There are two known regressions of this commit that I will fix later:
- you cannot remove interfaces anymore
- IPv4 multicast was broken anyway, but now it's disabled, too.
* Moved a device_interfaces.cpp|h out of interfaces.cpp.
* The datalink layer chain is now instantiated per domain per interface,
not just per interface anymore.
* When a buffer reaches the network layer, it has no known interface yet, ie.
the ipv4|6|whatever modules need to set this manually.
* Added more debug output, and some new debugger commands, the control option
is now printed in clear text.
* Added hash_address() function to the address modules. Added "const" to
set_to_defaults() where needed.
* Fixed net_buffer's restore header functions offset use as reported by Atis.
* Improved buffer dump output, use the domain module to print the address if
available.
* Moved net_buffer::type into the union, as it's not needed by the upper layers
anymore.
* Moved IPv6 specific code from {add|remove}_default_route() to where it
belongs, but disabled it for the time being.
* Completely discarded useless ipv4_datagram module.
* Added ping6 to the build.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@37794 a95241bf-73f2-0310-859d-f6bbb57e9c96
as correctly pointed out by Ingo these are no setting files.
* Use find_directory() here and in places marked with TODOs.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@37772 a95241bf-73f2-0310-859d-f6bbb57e9c96
(closed ticket #6380).
* Changed path to /boot/common/settings.
Someone feel free to change the implementation to get
the path from find_directory(...).
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@37761 a95241bf-73f2-0310-859d-f6bbb57e9c96
files from HaikuImage and is set when HAIKU_DISTRO_COMPATIBILITY is 'official'
or 'compatible'
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@37742 a95241bf-73f2-0310-859d-f6bbb57e9c96
* Remove 4.2 sourcecode
* ICU is now an optional package (mandatory)
* Adjust the namespaces and libraries names where needed
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@37498 a95241bf-73f2-0310-859d-f6bbb57e9c96
* copy the needed jam files during compile time. This ensures the correct data
files are used, for example in non-trunk builds
* -f now only removes the generated at runtime listing of available packages
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@37465 a95241bf-73f2-0310-859d-f6bbb57e9c96
I've removed it for now, until someone finds the time to look into it.
* Therefore, enabled all supported devices for the rtl81xx driver.
* Made the rtl81xx driver actually work by adding the missing PHYs - it doesn't
use the same PHYs as the rtl8139 driver. Imported the rgephy.c|h from FreeBSD
8 (not yet in vendor branch, but unchanged).
* It seems to work reliably with Gigabit now, albeit a bit slow, and with too
high CPU load.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@37425 a95241bf-73f2-0310-859d-f6bbb57e9c96
Haiku causes the image file to need 193 MB; building it in FreeBSD requires
only 180 MB.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@37343 a95241bf-73f2-0310-859d-f6bbb57e9c96
This will be utilized by installoptionalpackage, to determine which packages
are already installed in the system and thus should not prevent the
installation of other packages.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@37239 a95241bf-73f2-0310-859d-f6bbb57e9c96
"application/x-vnd.haiku-screenshotapp" to "application/x-vnd.haiku-screenshot"
* Rename "Screenshot" to "screenshot", rename its signature from
"application/x-vnd.haiku-screenshot" to "application/x-vnd.haiku-screenshot-cli"
* Move screenshot from /system/apps to /bin
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@37059 a95241bf-73f2-0310-859d-f6bbb57e9c96
- Remove the options panel, and the "-o, --options" switch, put all options
inside the main panel as discussed in ticket #3831.
- Add a "Copy to clipboard" button, as discussed in ticket #3831.
- Add a "-c, --clipboard" switch to quickly copy a screenshot to the clipboard
without launching the GUI.
- All settings apply directly to the current schreenshot as well as new
Screenshots, as discussed in ticket #4100.
- Separate executables for the CLI (Screenshot) and GUI (ScreenshotApp).
When "Screenshot" is launched it runs in the background, and launches the
GUI (if not run with the -s or -c switch) before quiting itself. When a new
screenshot is requested through the ScreenshotApp GUI interface,
ScreenshotApp launches Screenshot before quiting itself, after which
Screenshot re-launches ScreenshotApp. This fixes ticket #4100.
Note that because of this change the deskbar entry will show "ScreenshotApp"
and not "Screenshot" as might be expected. I am not sure if this is a
problem.
- Fixed the code that determines the active window because it was just finding
the top most window. This change fixes tickets #3112, #4878, and #4423.
- Hide the cursor by calling BApplication::HideCursor().
This fixes ticket #2988 (but *not* #2997).
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@37017 a95241bf-73f2-0310-859d-f6bbb57e9c96
#1245. There are some TODOs outlined in the ticket, but they will be much
easier to review as individual patches against trunk, versus as a new version
of the huge patch.
I've messed a lot with src/servers/notification/NotificationsView.cpp in order
to resolve a crash I was getting when testing this thing (rewrote line
wrapping). I've also replaced the icons with the one that zuMi did long ago.
Thanks, plfiorini, for working on this code as much as you did!
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@36949 a95241bf-73f2-0310-859d-f6bbb57e9c96
* remove superfluous (unused) language files - we now get this information
from ICU
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@36856 a95241bf-73f2-0310-859d-f6bbb57e9c96
control icon into a new post_install script. Tested in QEMU and the items are
persistent also for the volume control.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@36805 a95241bf-73f2-0310-859d-f6bbb57e9c96
prevents a second folder "draft" being created when saving mails in Mail.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@36503 a95241bf-73f2-0310-859d-f6bbb57e9c96
indicates the archive to be usable with either GCC. When utilized, the
packages shared libraries will automatically be symlinked in the alternative
gcc subdir, eg common/lib/gcc4. At the moment, packages that set isCDPackage
are not supported, as Installer needs to be enhanced.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@36456 a95241bf-73f2-0310-859d-f6bbb57e9c96
test for BGradient. Mandelbrot would also be a candidate for removal, but maybe
some people are sentimentally attached to it, since it was an old BeOS demo. :-)
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@36428 a95241bf-73f2-0310-859d-f6bbb57e9c96
* Removed irq_routing struct from ACPI.h to where it is used. Might be able to use acrestype.h instead of duplication.
* Disable old embedded controller and remove it from image.
* Move embedded controller code to busmanager module.
* Remove (some) code duplication
Should work as before, but is now initialized right after the bus manager. Can probably remove further code duplication.
I hope I've done it correctly, feedback is most welcome.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@36420 a95241bf-73f2-0310-859d-f6bbb57e9c96
uses it.
* While I were at it, I removed the ps2mouse driver as well, as well the whole
arch directory (as it is otherwise empty).
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@36261 a95241bf-73f2-0310-859d-f6bbb57e9c96
* addition of common/etc/vimrc
* creation of symlink vi --> vim
Improves but not a final fix for #5699
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@36082 a95241bf-73f2-0310-859d-f6bbb57e9c96
temporary means for joining an unencrypted or WEP encrypted wifi network.
setwep works with 64- and 128-bit WEP and supports both text keys as well as
hex digit keys.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@36057 a95241bf-73f2-0310-859d-f6bbb57e9c96
* build shared and static libraries for libtiff, cleaned libtiff sources
* TIFFTranslator now uses this library
I used 3.8 as library version as it seems the API didn't change since then
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@35857 a95241bf-73f2-0310-859d-f6bbb57e9c96
whether to extract the firmware archive onto Haiku Image or to simply copy
it intact. This allows the ipw2100 and iprowifi2200 firmware archives to be
copied onto the default images. Fixes#5523
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@35738 a95241bf-73f2-0310-859d-f6bbb57e9c96
