the new cpuid stuff was apparently exacerbating an existing problem where various bits of low level
cpu code (specifically get_current_cpu) weren't really initialized before being used. Changed the
order to set up a fake set of threads to point each cpu at really early in boot to make sure that at
all points in code it can get the current 'thread' and thus the current cpu.
A probably better solution would be to have dr3 point to the current cpu which would then point to the
current thread, but that has a race condition that would require an int disable, etc.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@20160 a95241bf-73f2-0310-859d-f6bbb57e9c96
Now two complete tss structures exist within the per-cpu structure. Instead
of having to create a seperate area per each one, initialize them in place.
Also, the old mechanism to getting all of the cpus to get initialized was
subtly broken, but still managed to work. Now, just force all the cpus to
initialize at boot, which makes the actual swapping of esp0 somewhat simpler.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@20131 a95241bf-73f2-0310-859d-f6bbb57e9c96
at boot, per cpu, detect the cpu, pull down all the relevant cpuid bits and
save them into the per-cpu structure. Changed most of the code scattered here
and there that reads the cpuid to use a new api, x86_check_feature, which looks
at the saved bits.
Also changed the system_info stuff to read from these bits.
While i was at it, refreshed all the bits to be current.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@20072 a95241bf-73f2-0310-859d-f6bbb57e9c96
some Pentium 200 MMX pretend to support MTRRs.
This should fix bug #553.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@19899 a95241bf-73f2-0310-859d-f6bbb57e9c96
the userland stack in an unsafe way - moved that stuff to arch_thread_enter_userspace(), too.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@19778 a95241bf-73f2-0310-859d-f6bbb57e9c96
turned off - accessing userland memory. Now, arch_thread_enter_userspace() does that
job, and as a result, may also fail.
* dump_thread() now directly prints the info of the current thread when used without
argument (rather than iterating the thread list to look for the current thread).
* If arch_thread_init_tls() fails upon thread creation, the function will now return
an error.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@19775 a95241bf-73f2-0310-859d-f6bbb57e9c96
arch dependent code (they will be removed as soon as someone else
asks for these interrupt lines).
* Added an interrupt driven keyboard handler to the kernel that uses
this technique. As a result, you can now press F12 to enter the kernel
debugger before the input_server has been started, and Control-Alt-Delete
should reboot the system (actually I did not test the latter yet).
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@17806 a95241bf-73f2-0310-859d-f6bbb57e9c96
the device manager is initialized. For x86 it does nothing, but
for PPC it searches for a supported interrupt controller and
remembers it for later use.
arch_int_{enable,disable}_io_interrupt() are implemented as
well as handling of external exceptions (aka as I/O interrupts).
We'll see later how well that works.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@16271 a95241bf-73f2-0310-859d-f6bbb57e9c96
code. The stack pointer was not adjusted, hence we were
overwriting the previous register value. But it looks like I
missed to check in the arch_cpu.h with the iframe structure
including the floating point registers anyway.
* Backported the ELF PPC relocation code from the boot loader to
the kernel.
* Fixed the PPC version of arch_thread_switch_kstack_and_call().
Apparently the signature had changed, but the assembly
implementation was not adjusted accordingly.
* sc prints more registers now (LR, CR, CTR, XER,...).
* Fixed several occurences of not-working fault handlers.
Apparently the compiler realized, that the "error" label was
never jumped to (by the code it knew), and optimized the
respective code away. Now we use a trick to make it think the
error label might actually be jumped to. I wonder whether the
x86 version has the same problem when being compiled with GCC4.
* Adopted the x86 page fault handling interrupt code.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@15933 a95241bf-73f2-0310-859d-f6bbb57e9c96
We don't do anything with it yet, though, so the BIOS will probably ignore us since
we are supposed to poll for events.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@15900 a95241bf-73f2-0310-859d-f6bbb57e9c96
* Cloned iframe stack management from x86.
* Reimplemented arch_thread_{get,set}_current_thread(). The
thread structure is stored in SPRG2. It is set to NULL in
arch_cpu_preboot_init(), now. A non-null current thread
causes all kinds of undesired behavior in early boot code.
* We establish the address space mappings we know from the
Open Firmware as areas. At least those in kernel address
space. The ones in userland address space are tougher.
Fortunately on my Mac mini there aren't any save the
boot_loader stack, which is not needed any longer anyway.
* Added stack trace support to the kernel debugger. Mostly
cloned and adjusted the x86 code. Some bits are still
missing, like stack traces for other threads.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@15890 a95241bf-73f2-0310-859d-f6bbb57e9c96
void after turning off BAT for the segment containing itself.
The monster macro for the exception vector code was not really
elegant besides being too long for the 32 byte performance
monitor exception slot. Furthermore wasting three of the SPRG*
registers as cheap scratch memory wasn't that nice either.
We now have a three-step approach: The exception vectors
themselves contain only five instructions which branch to common
code at the beginning of the same physical page. That one sets
up BAT for itself, turns address translation back on and jumps
into the kernel. There we turn off BAT again, dump an iframe,
and enter the actual exception handler (/dispatcher). Upon return
the registers are restored from the iframe and we get back to the
place where the exception occurred.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@15881 a95241bf-73f2-0310-859d-f6bbb57e9c96
The time base conversion factor is the 32 bit value
2^32 * 1000000 / time base frequency,
so the system time can be computed by
system time = time base * conversion factor / 2^32.
The expression in system_time() looks more complicated now, but is
actually much faster (factor 2.5 on my Mac mini). I'm positively
surprised, how good the assembly looks, that GCC 4 generates. There's
not that much potential for optimization by hand-coding the function.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@15863 a95241bf-73f2-0310-859d-f6bbb57e9c96
device in the Open Firmware implementation of boot loader and
pass its path to the kernel, where it's opened and used for
getting/setting the real time. The expensive atomic_*64() on PPC
32-bit make things a bit more complicated. Moreover, missing
64 bit multiplication and division instructions won't really
allow system_time() to be anywhere near as fast as on x86. :-/
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@15837 a95241bf-73f2-0310-859d-f6bbb57e9c96
substructure now (that's the only member actually). The system time
offset is therefore accessed via architecture specific accessor
functions.
Note, that this commit breaks the PPC build. Since I want to rename at
least one file I've already changed, I can't avoid that.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@15835 a95241bf-73f2-0310-859d-f6bbb57e9c96
Basically the architecture specific code is now responsible to
init and make use of the platform specific code, now. The reason
being that we have only one kernel per platform and thus cannot
decide at compile time, which platform to use (if any).
The PPC implementation features an abstract base class PPCPlatform
(implemented for all supported platforms) through which platform
support is provided.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@15824 a95241bf-73f2-0310-859d-f6bbb57e9c96
bus, and time base frequency) in the PPC boot loader, and propagate
them to the kernel via kernel_args.
* Now we use the correct time base frequency for timer calculations.
* Implemented PPC specific system info stuff. Added a few PPC CPU
types to <OS.h>.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@15817 a95241bf-73f2-0310-859d-f6bbb57e9c96
remapping stuff into separate functions and made them available to
others.
* Remap the exception handler space in arch_int_init_post_vm() into the
kernel address space (same issue as with the page table).
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@15783 a95241bf-73f2-0310-859d-f6bbb57e9c96
According to the spec we need to set it before taking over the MMU,
but we can't call it before arch_mmu_init(), since we need the OF
to allocate the page table. So we do it after we have allocated
the new page table.
* Added PPC specific kernel_args: The virtual address ranges we want
to keep in the kernel. We fill that in with the translations we
find when initializing the MMU stuff. We remove the memory the
boot loader occupies from those. Besides the stack for the boot
loader only the OF stuff remains.
* arch_mmu_allocate() now starts to search at KERNEL_BASE for a free
virtual address when no particular address is requested. This saves
us further trouble in the kernel, since those allocations would
need to be remapped otherwise.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@15780 a95241bf-73f2-0310-859d-f6bbb57e9c96
the fact that I couldn't find ptesync in an otherwise more complete
documentation I downloaded yesterday made me suspicious.
* arch_cpu_global_TLB_invalidate() uses tlbia now. The instruction is
optional, but so is tlbie (how I understood it is that both exist,
when the architecture implementation has a TLB). And the former loop
looked just scary.
* Implemented arch_cpu_user_TLB_invalidate(). It does just the same as
arch_cpu_global_TLB_invalidate().
* Some changes with respect to synchronization required on page table
and segment register updates.
* Some more minor renaming. Pulled a new function
remove_page_table_entry() out of unmap_tmap().
* In arch_vm_translation_map_init_post_area() we do now remap the page
table into the kernel address space, if it was without before. The
page table might actually be a good application for BAT, though.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@15773 a95241bf-73f2-0310-859d-f6bbb57e9c96
this saves 4 bytes per page. To compensate the loss of bytes, the offset is now
stored in page size units, that's enough to address 2^44 or 16 TB (which is now
the maximal supported file size!).
* Renamed vm_page::ppn to physical_page_number.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@15637 a95241bf-73f2-0310-859d-f6bbb57e9c96
arch/*/thread_struct.h to arch_thread_types.h, so that it can directly
be included without having to specify the architecure.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@15616 a95241bf-73f2-0310-859d-f6bbb57e9c96
kernel TLBs from being flushed on context switch.
* new arch_cpu_user_TLB_invalidate() that now does what arch_cpu_global_TLB_invalidate()
did before.
* arch_cpu_global_TLB_invalidate() will now flush all TLBs, even those from the
kernel.
* some cleanups.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@15535 a95241bf-73f2-0310-859d-f6bbb57e9c96
* The boot loader now checks the CPU for the cpuid and rdtsc features, which we
currently both rely on.
* Removed old and no longer used stage2_priv.h header
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@15534 a95241bf-73f2-0310-859d-f6bbb57e9c96
has not yet been tested, though - I'll do this after this commit):
* Removed the arch_memory_type stuff from vm_area; since there are only 8 memory
ranges on x86, it's simply overkill. The MTRR code now remembers the area ID
and finds the MTRR that way (it could also iterate over the existing MTRRs).
* Introduced some post_modules() init functions.
* If the other x86 CPUs out there don't differ a lot, MTRR functionality might
be put back into the kernel.
* x86_write_msr() was broken, it wrote the 64 bit number with the 32 bit words
switched - it took me some time (and lots of #GPs) to figure that one out.
* Removed the macro read_ebp() and introduced a function x86_read_ebp()
(it's not really a time critical call).
* Followed the Intel docs on how to change MTRRs (symmetrically on all CPUs
with caches turned off).
* Asking for memory types will automatically change the requested length to
a power of two - note that BeOS seems to behave in the same, although that's
not really very clean.
* fixed MTRRs are ignored for now - we should make sure at least, though,
that they are identical on all CPUs (or turn them off, even though I'd
prefer the BIOS stuff to be uncacheable, which we don't enforce yet, though).
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@15528 a95241bf-73f2-0310-859d-f6bbb57e9c96
to be able to follow the stack trace into userland.
No symbols there, yet, though.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@14697 a95241bf-73f2-0310-859d-f6bbb57e9c96
* there is now a "Disable Hyper-Threading" safemode in the boot loader
* the SMP & HT menu items are now added in smp.cpp - and are only added
if the system supports one of them.
* more cleanup to smp_apic.h
* removed cpuid() from the boot loader's support.S - instead, it will now
use the one from the kernel.
* added a very weak HT detection: if the MP config only listed one CPU,
and this CPU supports HT, we enable the other logic processor manually -
as this currently doesn't work, it's disabled, though.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@14536 a95241bf-73f2-0310-859d-f6bbb57e9c96
part of the base table, not the extended table.
Renamed some structure fields, variables to be clearer and nicer to read.
Removed some unused stuff.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@14502 a95241bf-73f2-0310-859d-f6bbb57e9c96
your system, I've also added a "Disable SMP" safemode option. The NO_SMP
define is still there, and will be removed once SMP works flawlessly.
Prints out infos about the interrupt entries in the MP config.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@14499 a95241bf-73f2-0310-859d-f6bbb57e9c96
user application performs a division by zero or causes a general
protection fault. For some exceptions (e.g. machine check) I wasn't
quite sure whether they can be caused by user apps at all, so we panic()
in those cases. Wouldn't harm, if someone more knowledgable would check
this, though.
* Removed the unused fault handling stuff, respectively moved the little
that was used into x86/arch_int.c.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@13795 a95241bf-73f2-0310-859d-f6bbb57e9c96
called by debug_init_post_vm().
Since the availability of a blue screen specific getchar() is static anyway, there
is no need for the sBlueScreenGetChar variable (only the message "only serial input
available" gets lost, but since that is platform specific anyway...).
Hello blue screen! We now have an on-screen KDL, to be enabled by the kernel
setting "bluescreen", just like on BeOS.
The blue screen does not yet support any cursor actions or backspace, though (need
to grab some stuff from our console driver).
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@12896 a95241bf-73f2-0310-859d-f6bbb57e9c96
kernel_debugger() didn't do enough before; panic() did all the work - but
since the former is a public function as well, I moved all the functionality
to it. Also fixed a possible buffer overrun in panic().
Renamed dbg_* to debug_*.
"serial_debug_port" setting did not ignore negative values.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@12889 a95241bf-73f2-0310-859d-f6bbb57e9c96
Lots of cleanup:
- moved B_NO_ENABLE_COUNTER flag definition out of int.h to KernelExport.h, as it's
described in the BeBook (although it's probably not really used that often :))
- int.c no longer has any platform dependent code (+ 0x20 on interrupt numbers is gone);
it's now entirely handled in the arch/x86/ section.
- the io_vectors[] is now statically initialized, instead of allocated from the heap
- removed {install|remove}_interrupt_handler(); they weren't that useful, arch_smp_init()
is now calling install_io_interrupt_handler() correctly instead
- introduced a new arch_int.h header file that currently contains NUM_IO_VECTORS only
(though on x86, it also has ARCH_INTERRUPT_BASE == 0x20).
- changed the return type from {install|remove}_io_interrupt_handler() from "long" to
"status_t"
- rearranged and cleaned the PIC initialization code, made the PIC code more prominent
- changed comments that talk about a non existing 8239 (the PIC chip is actually 8259)
- moved arch/x86/interrupts.h to the source directory, as it's not used outside
- added BeOS compatible interrupts_enabled() function, that should replace our
equivalent (and private) are_interrupts_enabled()
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@12477 a95241bf-73f2-0310-859d-f6bbb57e9c96
create_area() and friends should fail if it's not supported.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@12248 a95241bf-73f2-0310-859d-f6bbb57e9c96
for these changes. I was mostly just staring in amazement at the screen
while Axel and Thomas were discussing IA32 internals. A particularly
fascinating moment was when Thomas produced the cause of a bug we had
been trying to track down for hours off the top of his head (of course
iret behaves specially when the NT bit is set :-). His slowness must be
excused though, since he hadn't slept for more then 30 hours. ;-)
The code doesn't wholeheartedly deal with multi-processor machines yet.
Axel will certainly do some cleanup...
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@12239 a95241bf-73f2-0310-859d-f6bbb57e9c96
flag. Now, it will choose how to set the granularity by evaluating the
limit.
This call was actually already used this way in the kernel, so that
the TLS and TSS segments were much too large (harmless but incorrect).
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@12231 a95241bf-73f2-0310-859d-f6bbb57e9c96
Introduced a gBootFrameStack that is used until the first thread structure
is available - this allows stack crawls and useful register dumps during
early startup. Could also be solved differently by making sure there is
always a thread structure installed in %dr3 (ie. the boot thread would
get a static thread structure instead of a static iframe stack only).
This might be a better solution as i386_handle_trap() would no longer
need to check for an existing thread structure.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@12230 a95241bf-73f2-0310-859d-f6bbb57e9c96
Moved ptentry/pdentry to arch_vm_translation_map.c and renamed them to
page_table_entry and page_directory_entry.
Fixed a race condition that happened when memory was remapped (which
can currently happen because lock_memory() does not work correctly, and
there might be other conditions as well, like certain vm_store fault
handlers). Now, page table and directory entries are updated atomically.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@12229 a95241bf-73f2-0310-859d-f6bbb57e9c96
with the bit number, not the respective mask).
* Added a small hack to allow single stepping to work in qemu.
Apparently the BS bit in DR6 is not set when the debug exception
is handled. So we always assume that a single step event occurred,
when we couldn't recognize any other event, if the hack is enabled.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@11998 a95241bf-73f2-0310-859d-f6bbb57e9c96
we only have 3 debug registers available for break-/watchpoints.
* Added definitions for debug status register DR6. Reordered DR7 defs to
ascending order. Added definitions for the EFLAGS flags we need.
* Added arch_thread_debug_info structure and related definitions.
git-svn-id: file:///srv/svn/repos/haiku/trunk/current@11525 a95241bf-73f2-0310-859d-f6bbb57e9c96
needed to get the topmost user iframe. Added i386_get_user_iframe() for
exactly that purpose.
* Added reinitialization of user debugging for the new thread when
switching the context.
git-svn-id: file:///srv/svn/repos/haiku/trunk/current@11523 a95241bf-73f2-0310-859d-f6bbb57e9c96
* Made the parameter for restoring the FPU state const.
git-svn-id: file:///srv/svn/repos/haiku/trunk/current@11522 a95241bf-73f2-0310-859d-f6bbb57e9c96
debug infos.
* Added function for setting the CPU state.
* Added functions for setting break-/watchpoints.
git-svn-id: file:///srv/svn/repos/haiku/trunk/current@11507 a95241bf-73f2-0310-859d-f6bbb57e9c96
Introduced new arch_vm.h ("public" arch headers have the arch_ prefix).
git-svn-id: file:///srv/svn/repos/haiku/trunk/current@10384 a95241bf-73f2-0310-859d-f6bbb57e9c96
of BIOS32, SMBIOS, and DMI services.
Also implemented a get_bios32_service() function which you can use to get
access to that service (ie. for use by the PCI bus manager).
git-svn-id: file:///srv/svn/repos/haiku/trunk/current@10286 a95241bf-73f2-0310-859d-f6bbb57e9c96
an error, there is supposed to be one of these at maximum right now).
git-svn-id: file:///srv/svn/repos/haiku/trunk/current@9517 a95241bf-73f2-0310-859d-f6bbb57e9c96
and why they are called.
Introduced a cpu_init_post_vm() that will now call arch_init_post_vm() instead
of letting main() doing it.
Fixed some return types (mostly from int to status_t).
git-svn-id: file:///srv/svn/repos/haiku/trunk/current@9438 a95241bf-73f2-0310-859d-f6bbb57e9c96
- the above file now also exports a function to finally complete the kernel's
address space translation map after semaphores became available (was just
not done before)
- renamed some functions, especially the *_init2() functions are now called
like *_init_post_area() to indicate they are called after the area functionality
became available
- removed the _struct suffix from certain structures
- fixed some return types
- added prototype for vm_free_unused_boot_loader_range() to be called by
arch code.
git-svn-id: file:///srv/svn/repos/haiku/trunk/current@9423 a95241bf-73f2-0310-859d-f6bbb57e9c96
The former now only contains the structure definitions, while the other one
contains the arch-specific function prototypes (which do not have the arch_
prefix).
Added a ToDo comment to remember cleaning this up one day.
Made all headers C++ safe, simplified where possible.
git-svn-id: file:///srv/svn/repos/haiku/trunk/current@5197 a95241bf-73f2-0310-859d-f6bbb57e9c96
Replaced definitions for enable_interrupts() and are_interrupts_enabled()
with static inlines.
Made int.h C++ safe.
git-svn-id: file:///srv/svn/repos/haiku/trunk/current@5190 a95241bf-73f2-0310-859d-f6bbb57e9c96
Added constructors to block_address_translation and segment_descriptor
that will clear its memory (could be done more efficiently though, it just
uses memset()).
Added definitions for the MSR (machine state register).
Added tlbsync() macro (direct assembler call).
git-svn-id: file:///srv/svn/repos/haiku/trunk/current@5092 a95241bf-73f2-0310-859d-f6bbb57e9c96
in this file.
Moved the vm_translation_map_get_pgdir() function to the x86 specific
header.
git-svn-id: file:///srv/svn/repos/haiku/trunk/current@5066 a95241bf-73f2-0310-859d-f6bbb57e9c96
Added an alternative page_table_entry::SecondaryHash() signature.
git-svn-id: file:///srv/svn/repos/haiku/trunk/current@4988 a95241bf-73f2-0310-859d-f6bbb57e9c96
They are only used if the architecture doesn't support them directly.
git-svn-id: file:///srv/svn/repos/haiku/trunk/current@4360 a95241bf-73f2-0310-859d-f6bbb57e9c96
from smp_priv.h and stage2_priv.h. Created a new file smp_apic.h which now
contains those definitions.
Made the APIC_xxx register offsets only base offsets (without referencing a
particular variable).
Other small cleanups (i.e. "unsigned int" to uint32).
git-svn-id: file:///srv/svn/repos/haiku/trunk/current@2604 a95241bf-73f2-0310-859d-f6bbb57e9c96
Renamed i386_set_kstack() to i386_set_tss_and_kstack(), because that's what
it does.
Added a new function arch_thread_init_tls() which must be called after
having allocated the TLS area.
Renamed arch_thread_initialize_kthread_stack() to arch_thread_init_kthread_stack()
to be more consistent.
Changed the parameters for arch_thread_enter_uspace() - it now gets a pointer
to the thread structure and takes the user stack pointer from there (which
might also be architectural different).
git-svn-id: file:///srv/svn/repos/haiku/trunk/current@2379 a95241bf-73f2-0310-859d-f6bbb57e9c96
Moved the tss_descriptor structure to descriptor.h, updated it to be a
segment_descriptor structure, and provided inlines for set_tss_descriptor(),
set_segment_descriptor(), set_segment_descriptor_base(), and
clear_segment_descriptor().
Also added defines for the different privilege levels and descriptor types.
Removed the unusused and incorrect TSS definition, introduced new
TSS_BASE_SEGMENT and TLS_BASE_SEGMENT macros.
Removed include of arch/cpu.h in arch_cpu.h.
git-svn-id: file:///srv/svn/repos/haiku/trunk/current@2360 a95241bf-73f2-0310-859d-f6bbb57e9c96
Changed the file_descriptor structure (more status_t, name removed).
Changed "extern inline" to "static inline" in thread.h/arch_thread.h as those
also work with -O0 -g.
Added prototypes for [arch_cpu_]user_strlcpy().
git-svn-id: file:///srv/svn/repos/haiku/trunk/current@1454 a95241bf-73f2-0310-859d-f6bbb57e9c96
Removed dependencies on arch/x86/types.h - this file is not really used
anymore, now. Might prevent compiling on Windows, though.
Replaced "int" with "int32" for the id types.
Removed some stuff from ktypes.h because it didn't belong there.
git-svn-id: file:///srv/svn/repos/haiku/trunk/current@1120 a95241bf-73f2-0310-859d-f6bbb57e9c96
A couple of changes in various interrupt and thread functions and structures.
These make it now possible to change the stack at any time without making the kernel crash. This is needed for calling VESA 3.0 VBE functions through the protected mode interface.
git-svn-id: file:///srv/svn/repos/haiku/trunk/current@422 a95241bf-73f2-0310-859d-f6bbb57e9c96