The previous hack, which as the comment (and __MWERKS__) implies
dates all the way back to the Be era, finally broke: int32 is "int"
on non-x86, not "long", and so this generated an undefined symbol
error on ARM.
The best solution seems to be to make StartMenuBar merely protected,
and then make a subclass where it is fully public to call it.
This is a lot less fragile (and much less ugly.)
Change-Id: I0519d0d9eeb1cc4523d0c6dd4fdfe8688ed1092c
Reviewed-on: https://review.haiku-os.org/c/1516
Reviewed-by: Adrien Destugues <pulkomandy@gmail.com>
Remove a currently unused copy of it from HaikuDepot.
Change-Id: Idb97fae8e7190da6bc1049b3c1f1df929ea91bab
Reviewed-on: https://review.haiku-os.org/c/1506
Reviewed-by: waddlesplash <waddlesplash@gmail.com>
Their copy constructors are exactly what GCC would generate,
but we can't remove them because doing so would make them
trivially copyable, and so they would be passed in registers
on x86_64, an ABI breakage.
So instead we have to add explicit casts to void* here.
A lot of these classes are not *technically* "trivially copyable"
for one reason or another, but in all of these cases it seems
OK to me to use memcpy/memset on them. Adding a cast to void*
tells GCC that "I know what I'm doing here" and shuts up the
warning.
These worked in identical fashion to what the default copy
constructors would be, but their mere presence marks the class
as being "non-trivially copyable," which means that memcpy'ing
it is now a -Werror on GCC 8.
We have to be careful when making this change, though: classes
which *are* trivially copyable can be passed inside registers
on x86_64, so changes like these break ABI in a dangerous way.
These classes is private, so it should not be a problem, but
for other classes (e.g. BRect, BPoint) we cannot fix them
properly right now.
should help for ports.
Change-Id: Id504bdb79cb68db4b615f58848e0e1a86ced8d2b
Reviewed-on: https://review.haiku-os.org/c/1467
Reviewed-by: Adrien Destugues <pulkomandy@gmail.com>
add-ons" is set.
Confirmed to fix#14361. It is finally possible to un-brick an install
with a bad system library in non-packaged without having to use another
install to do so.
Change-Id: Iafea7821f02cb34e77c766b1f97d1c19206b1081
Reviewed-on: https://review.haiku-os.org/c/1452
Reviewed-by: Adrien Destugues <pulkomandy@gmail.com>
All of Barrett's individual reverts have been squashed into this
one commit, save a few actual bugfixes.
Change-Id: Ib0a7d0a841d3ac40b1fca7372c58b7f9229bd1f0
This allows cpu_type.h to be used in C-based software,
with the get_cpu_*() functions all accessible via C as well
as C++ code.
Tested changes with sysinfo, AboutHaiku and Pulse.
Change-Id: Ide87d8e3f2ba5f0f1890f385b1ac90c677bcc274
Reviewed-on: https://review.haiku-os.org/c/1453
Reviewed-by: waddlesplash <waddlesplash@gmail.com>
app_server just passes the add-on path around.
Maybe we should make sure the add-on can be loaded when setting it.
Change-Id: I3acd3299782a22c1666bd5435dbf3d8053e359fa
Reviewed-on: https://review.haiku-os.org/c/1430
Reviewed-by: waddlesplash <waddlesplash@gmail.com>
* mutex_destroy() only checked wether or not there were waiters,
not if the lock itself was presently held by another thread.
Now we do, which should make #15015 panic much earlier instead
of trying to use freed memory.
* mutex_transfer_lock() and recursive_lock_transfer_lock() did
not check that the calling thread actually owned the lock.
Now it does, which should trigger asserts if anyone tries
to do this.
* Oops, there's a standard for these. Stick to the standard.
* Add a few that could be useful someday.
* Mention iana spec.
Change-Id: I4cf75e8c1e4b25f65d10921c7075fbd53f44e14e
Copied from PPC with the hooks for Apple hardware removed.
To be completed with the actual PCI bus implementation for Sun machines.
This is where we start doing machine specific stuff, apparently.
Change-Id: I06af4de9621e9d40593d153642478d928083e49a
Reviewed-on: https://review.haiku-os.org/c/1364
Reviewed-by: waddlesplash <waddlesplash@gmail.com>
* I added this early on, but to be honest, any interesting
workstation class hardware would be riscv64.
* Since riscv32 is mostly embedded or low power, just drop.
Change-Id: Id36274c882c46e766268f2ab53eb1bd5f95227be
Reviewed-on: https://review.haiku-os.org/c/1352
Reviewed-by: Adrien Destugues <pulkomandy@gmail.com>
By default, all targets support the "haiku" platform, and we no longer
support building for BeOS, Dan0, Zeta, or other BeOS-compatible targets,
so this is no longer needed.
Also remove all references to the non-Haiku compatible platforms, and
change all BEOS_COMPATIBLE checks to HAIKU_COMPATIBLE. Removal of
all SetSubDirSupportedPlatformsBeOSCompatible invocations
will be in the next commit.
Declare and use the correct registers to define a stack frame.
Change-Id: Ice3ba8f8715313a715f6b1cb553a6883541f5cc4
Reviewed-on: https://review.haiku-os.org/c/1327
Reviewed-by: Alex von Gluck IV <kallisti5@unixzen.com>
* Kernel is 64 bit, and we won't need a 32bit load base.
Change-Id: I729bab01c8f71083002db061e153b0e5052b9a1c
Reviewed-on: https://review.haiku-os.org/c/1326
Reviewed-by: Alex von Gluck IV <kallisti5@unixzen.com>
* firewire and freebsd_network expect the macros come from
sys/param.h, as this is one of the places FreeBSD defines them
* All others are Haiku-native and can use Be-style macros.
Fixes the build breakage caused by PulkoMandy's recent commit.
Remove these from ByteOrder.h now also, as per POSIX they should
come from netinet/in.h.
This is a small source compatibility breakage, but it will only
affect a small portion of non-POSIX, partially-Be applications.
If this triggers, it means something is using the "build" errors while
the build system thinks it is not, which is always an error. Nothing
triggers this at present, but some subtle bugs in the build system
a while back would have been caught by this.
Add a platform cleanup hook before starting the kernel. The openfirmware
and PXE loaders clean up their network stack there, while the other
loaders currently do nothing.
This closes ticket #6166
Change-Id: I34765892dfd9b2310c6af97c9ff7d414afae49e5
Reviewed-on: https://review.haiku-os.org/c/50
Reviewed-by: Adrien Destugues <pulkomandy@gmail.com>
Reviewed-by: waddlesplash <waddlesplash@gmail.com>
Change-Id: Ia2a86d8814d06950ea2d2d19d966c642d26f81d6
Reviewed-on: https://review.haiku-os.org/c/1302
Reviewed-by: Alex von Gluck IV <kallisti5@unixzen.com>
Reviewed-by: Adrien Destugues <pulkomandy@gmail.com>
A bit of an explanation for these weirdly named functions:
LatestActivePackageInfos() returns the packages on the system that are
both installed and fully set up. When packages are in the middle of being
installed, LatestInactivePackageInfos() shows the packages in the process
of being installed. Once the installation process is done,
LatestInactivePackageInfos() returns nothing. If there are packages that
can't be fully activated without a reboot, CurrentlyActivePackageInfos()
will return the same information as LatestActivePackageInfos(), or if
everything has been installed and activated, it will return no packages.
Change-Id: Ia1814a5abda6d815c46e0b46dc812b4e7af81de3
Reviewed-on: https://review.haiku-os.org/c/1129
Reviewed-by: Adrien Destugues <pulkomandy@gmail.com>
Add various stubs to fix undefined references. No implementation for
anything yet.
Change-Id: I2d398bc2369d099e3a35f0713058d6a5edc6801d
Reviewed-on: https://review.haiku-os.org/c/1138
Reviewed-by: waddlesplash <waddlesplash@gmail.com>
This behaves mostly like a pointer, but pointer maths works in bytes,
not the native object size.
It avoids casting to char* and back when doing byte-based pointer math,
making the code easier to read.
Change-Id: I6a8681a398345f0c7d419a2cfe7244d972ffa62f
Reviewed-on: https://review.haiku-os.org/c/1086
Reviewed-by: waddlesplash <waddlesplash@gmail.com>
non standard extension, but widely available to obtain attributes for a thread.
also provides an alias for pthread_getattr_np which is the bsd equivalent.
Change-Id: I26ef8245ed2537186f48c8b8bdf3e42b03e70892
Reviewed-on: https://review.haiku-os.org/c/1172
Reviewed-by: Adrien Destugues <pulkomandy@gmail.com>
These are simple structs, so hopefully GCC8 will be OK with us
memsetting them. We can't use the standard = {} route because
GCC2 does not support that.
Initialize each class members instead of memset()
for clearing PackageInfoAttributeValue.
Pointed out by gcc8.
Change-Id: I8bdb328e2271e49e840b1294dba9cca544805e72
Reviewed-on: https://review.haiku-os.org/c/1114
Reviewed-by: waddlesplash <waddlesplash@gmail.com>
Add empty implementation of timer, elf, vm, debugger support, to let the
kernel link.
Also add the kernel linker script.
Change-Id: If0795fa6554aea3df1ee544c25cc4832634ffd78
Reviewed-on: https://review.haiku-os.org/c/1108
Reviewed-by: waddlesplash <waddlesplash@gmail.com>
Previous commit adding these was merged very quickly, so here's one
more...
Change-Id: I23c424db7631db1f0ec48e2d0ae47c8409ae6af2
Reviewed-on: https://review.haiku-os.org/c/1088
Reviewed-by: waddlesplash <waddlesplash@gmail.com>
During the compilation of LLVM version 8, the build failed because it depends
on a constant in this file. In hrev49042 all BSD headers were feature-gated by
_BSD_SOURCE. This is not done (for this file) in glibc and (obviously) not in
BSD's libc.
Since this is not common practise, I would propose removing the feature gate
for this header file, as it would mean that we would have to upstream patches
for ports of other software that depends on the availability of these
constants.
Change-Id: I486f0c2e87eff489ce92d03589a6299ef1be6ca5
Reviewed-on: https://review.haiku-os.org/c/1144
Reviewed-by: waddlesplash <waddlesplash@gmail.com>
Gets the stage0 bootstrap to run.
Imlementation is probably nonsense at this point.
Change-Id: I10876efbb54314b864c0ad951152757cdb2fd366
Reviewed-on: https://review.haiku-os.org/c/1061
Reviewed-by: waddlesplash <waddlesplash@gmail.com>
The kernel version is only partially tested.
Change-Id: I9a2f6c78087154ab137eadbced99062a8a2dd688
Reviewed-on: https://review.haiku-os.org/c/918
Reviewed-by: waddlesplash <waddlesplash@gmail.com>
sdhci:
- Add semaphore for interrupt management
- Add basic operations (setting clock, executing a command)
- Add early initialization (clocks and power up)
- Wrap the bus in a C++ class to ease usage
- Expose API to MMC bus manager
- TODO: manage card insertion and removal interrupts
- TODO: use MSI when available
mmc_bus:
- Implements SD card management independant of the way we access the bus
(later on different drivers can provide the same API as SDHCI)
- Worker thread to do the initialization
- Implement card initialization process up until getting an RCA from the
card. This is the generic part to assign an ID to the card, after this
point commands can be targetted at the specific card so it can be
handed over to the mmc_disk driver.
- TODO: initialization for non-SDHC cards which do not reply to CMD8.
Change-Id: I71950ca3ce206378a68fa7f97c19f638183d6cdd
Reviewed-on: https://review.haiku-os.org/c/1032
Reviewed-by: waddlesplash <waddlesplash@gmail.com>
Nothing that uses this API at present needs a const iterator (and
as far as I could see, nothing ever called Remove() on the iterator.)
But this is now how HashMap's API works, so let's be consistent.
Changes are pretty straightforward. The iterator is now const
again, but can be passed to the hash table itself for removal
of the current item.
Change-Id: Ifd3c8096ffb187a183ca5963ed69a256562a524f
Reviewed-on: https://review.haiku-os.org/c/1042
Reviewed-by: waddlesplash <waddlesplash@gmail.com>
The HashMap and HashSet classes are copied from userlandfs. The
HashMap one works as-is as it's already used in userlandfs; the
HashSet does not even compile yet.
Change-Id: I1deabb54deb3f289e266794ce618948b60be58c0
Reviewed-on: https://review.haiku-os.org/c/1041
Reviewed-by: waddlesplash <waddlesplash@gmail.com>
There isn't much use for a class that can only compute the dates of
two minor and one major holiday. Probably in the future the Locale Kit
could be extended to expose ICU holiday APIs, but seeing as that
is a less-used functionality, this can just be removed altogether
for now at least.
Change-Id: I18be044be7d5c6896295ed85d294abeea90b8bb0
Reviewed-on: https://review.haiku-os.org/c/1037
Reviewed-by: Adrien Destugues <pulkomandy@gmail.com>
* This indicates the view will manage whatever scrollbars are targeted
to it.
* Use _B_RESERVED7_ for this. It's been RESERVED since BeOS R5
(I guess it was probably something on some older BeOS version?)
and we don't really care about BeOS R4 ABI compatibility, so
that should be fine.
* Update BScrollView to not touch BScrollBar range/proportion
when the target view has this set.
* Update BListView to set this flag, always.
Fixes#14871.
Change-Id: I17027f3b63ef28da1e735c5393593496c415dce3
Reviewed-on: https://review.haiku-os.org/c/998
Reviewed-by: Adrien Destugues <pulkomandy@gmail.com>
No "real" functional change, but this causes GCC7 to throw errors when
these functions are declared without the image_id argument, which
in some files they were (as this commit repairs.)
This change is largely inconsequential on x86, but on callee-cleanup-args
targets, leaving out the argument would probably cause stack corruption.
Previously, __haiku_init_before was a symbol that was included in
each (shared) object, and so it could be used to determine what
one we were in. Now, there are no such universal symbols that
are declared private to only the object, so we have to use
a different approach.
__func__ is defined as a const char* at the very beginning of
every function it's used in, set to a string of the function name
only, i.e., the arguments and return type are left off. So while
including that is perhaps not quite optimal, in practice this
definition is used extremely rarely (it was introduced by Haiku,
and it is used in only 2 applications at all that I could find --
WebKit and Canna.)
There really isn't any other way to get a pointer that we know
for certain is within the current object besides this one
without inserting one, but that really isn't merited just for this.
(__builtin_return_address() has problematic semantics wrt. inlining,
including linker-inlining.) So this will have to do.
It is only used as an argument to _kern_load_image directly, not to
any of the load_image functions in image.h, so it belongs in a syscall-
specific header like other such constants.
No functional change intended.
* This iSCSI implementation only worked on PPC big-endian atm.
* We're pretty sure iSCSI support in haiku_loader doesn't make
much sense anymore. iPXE on (on arm,x86,etc EFI/BIOS platforms)
supports iSCSI boot of disks.
* Haiku could use a iSCSI driver add-on, but it would exist much
higher up and likely use standard drivers vs bare-minimum iSCSI
target impementations.
* Leaving TCP and adding to all arches since it could make sense
for haiku's native network disk subsystem or network debugging?
Change-Id: Ic181b93a1d8ffd77f69e00e372b44b79abbddb42
Reviewed-on: https://review.haiku-os.org/c/899
Reviewed-by: Alex von Gluck IV <kallisti5@unixzen.com>
Reviewed-by: waddlesplash <waddlesplash@gmail.com>
Better performance by using a single write, and some servers may not be
happy about getting so many TCP fragments for the HTTP header.
Change-Id: If7139e2a7748ea423d470676e70bd523a89031b2
Reviewed-on: https://review.haiku-os.org/c/909
Reviewed-by: waddlesplash <waddlesplash@gmail.com>
Registrar schedules an event every second to do
fRoster-CheckSanity(). This uses 2.5% cpu on my machine
when idle. Changing it to five seconds lowers it to 0.1%
waddlesplash then pointed me to this bug which changes it
to watch for team deletion and call fRoster->CheckSanity()
As I know little in this area, it's mostly based on what
LaunchDaemon does in MessageRecieved.
Change-Id: Ie69f9399cab41d2d492d469b5d3dc88e6080c15c
Reviewed-on: https://review.haiku-os.org/c/876
Reviewed-by: waddlesplash <waddlesplash@gmail.com>
This seems to fit the "spirit of layout" better.
Change-Id: I7a75b58de4c9f703d828cdd292b7b91ee720c135
Reviewed-on: https://review.haiku-os.org/c/891
Reviewed-by: waddlesplash <waddlesplash@gmail.com>
The old fixed-rect method was very error-prone in corner-cases,
resulting in half-visible (cut off) parameters, incorrectly
sized controls, etc. on various devices, which often made it
impossible to use.
While there are still a few rough edges (scrollbar behavior could
be further improved, though it's already much better than it was before),
this method is much better than the previous one.
Fixes#11592 and related tickets.
Change-Id: I65175f760bda98e42d1fc68ba8e526470bf17c25
Reviewed-on: https://review.haiku-os.org/c/889
Reviewed-by: Adrien Destugues <pulkomandy@gmail.com>
Implemented against POSIX-1.2013.
The implementation POSIX requirement thats setpriority() shall affect the
priority of all system scope threads only extends to POSIX threads. This
is implemented by modifying the default attributes for newly spawned
pthreads.
It is not possible to modify the default pthread attributes for different
processes with the current implementation, as default pthread attributes
are implemented in user-space. As a result, PRIO_PROCESS for which and 0
for who is the only supported combination for setpriority().
While it is possible to move the default attributes to the kernel, it
is chosen not to so as to keep the pthread implementation user-space only.
POSIX requires that lowering the nice value (increasing priority) can be
done only by processes with appropriate privileges. However, as Haiku
currently doesn't harbor any restrictions in setting the thread priority,
this is not implemented.
It is possible to have small precision errors when converting from Unix-
style thread priority to Be-style. For example, the following program
outputs "17" instead of the expected "18":
#include <stdio.h>
#include <sys/resource.h>
int
main()
{
setpriority(PRIO_PROCESS, 0, 18);
printf("%d\n", getpriority(PRIO_PROCESS, 0));
return 0;
}
The underlying reason is because when you setpriority() both 18 and 19
are converted to the Be-style "2". This problem should not happen with
priority levels lower than or equal to 20, when the Be notation is more
precise than the Unix-style.
Done as a part of GCI 2014. Fixes#2817.
Signed-off-by: Timothy Gu <timothygu99@gmail.com>
Co-authored-by: Leorize <leorize+oss@disroot.org>
Change-Id: Ie14f105b00fe8563d16b3562748e1c2e56c873a6
Reviewed-on: https://review.haiku-os.org/c/78
Reviewed-by: Jérôme Duval <jerome.duval@gmail.com>
Reviewed-by: waddlesplash <waddlesplash@gmail.com>
Registrar schedules an event every second to do
fRoster-CheckSanity(). This uses 2.5% cpu on my machine
when idle. Changing it to five seconds lowers it to 0.1%
waddlesplash then pointed me to this bug which changes it
to watch for team deletion and call fRoster->CheckSanity()
As I know little in this area, it's mostly based on what
LaunchDaemon does in MessageRecieved.
Just use BControLook where appropriate. It already provides a nice arrow
drawing function (also used in DeskBar expander and in scrollbar
buttons).
Fix second part of #8900
Changes by John Scipione:
Update menu mark and submenu arrow color with menu text color
Use text color for checkmark and submenu arrow colors, tint less black.
This means that colored bg/white text menu item will also draw a white
checkmark and submenu arrow.
Break out BMenuItem::Draw functionality into private methods _IsActive,
_LowColor() and _HighColor() methods and use them to set the mark colors.
Scale submenu arrow and checkmark with item height (which scales with
font size.)
does not align shortcuts with submenu arrows... but if you were to do
that you'd add item->Bounds().Height() / 2.
Signed-off-by: John Scipione <jscipione@gmail.com>
Change-Id: I8299094ef88bf227510b116eb1b84c261dc94723
Reviewed-on: https://review.haiku-os.org/c/341
Reviewed-by: Stefano Ceccherini <stefano.ceccherini@gmail.com>
Reviewed-by: Axel Dörfler <axeld@pinc-software.de>
Reviewed-by: waddlesplash <waddlesplash@gmail.com>
* Also implemented recording DrawString(string, length,
BPoint[] locations), which was previously not recorded at all.
* Also implemented playing back recently added drawing commands
in PicturePlayer.cpp. I don't quite understand what this is
actually used for, but it seemed it was forgotten. I just followed
the pattern already established in the code.
* The other important bit in this change is to update the pen
location when it is needed while recording a BPicture. Often
the BView will use PenLocation() in order to transmit drawing
commands to the app_server which use absolute coordinates only.
This isn't actually so nice, since it means the client has to
wait for the server to transmit the current pen location. If there
were dedicated link-commands for pen-relative drawing commands,
the client could just keep sending without waiting for the server.
In any case, the app_server needs to update the pen location in
the current DrawState and even the DrawingEngine even while
recording a picture, because some next command may need up-2-date
state information, such as the font state and the pen location.
* I have not yet tried to find /all/ instances where the DrawState
needs to be updated while recording. This change should repair
/all/ font state changes, all versions of drawing a string, and
all versions of StrokeLine().
Change-Id: Ia0f23e7b1cd058f70f76a5849acb2d02e0f0da09
Reviewed-on: https://review.haiku-os.org/c/817
Reviewed-by: Stephan Aßmus <superstippi@gmx.de>
* I want to introduce a new way for plugins to
register for a format. Supporting the old FormatManager is
too painful at this point and not worth the effort.
* We don't aim to replicate this functionality. I don't
think this will be useful at all in future iterations.
Originally I planned to rewrite it on top of the new
BMediaFormat, but now I am of the hopinion this is
greatly unneeded.
* Adds some missing methods signatures.
* integer vs float framerate is a longstanging debate. In theory,
in digital a/v there should not be need for floating point framerates.
This is because unless the software is run on exoteric hardware, there
is not need for it. Unfortunately, some legacy from the past like the
29.7 hz debate (NTSC) still may need to work under floating point framerates.
Even if in pratice it'd be run at 30 hz anyway.
* In theory, to handle all those correctly we should use a rational framerate,
however most code should be rewritten to support that correctly, and
it'd add some excessive complexities.
* All integer types are reverted back to unsigned ones. There's really
no reason to use signed integers there, and more importantly the danger
for integer underflows and the attached security concerns is very big.
There was no synchronization of the check of the done flag and the
waiting thread suspending to wait for it. It was therefore possible that
the new team both set the flag and triggered the wakeup of the waiting
thread in that time window, causing it to miss both the set flag and the
thread resumption.
Use a condition variable instead.
Fixes#13081.
Change-Id: I93c45db8dd773fe42b45c4b67153bcd39e200d3b
Reviewed-on: https://review.haiku-os.org/803
Reviewed-by: waddlesplash <waddlesplash@gmail.com>
This allows heap implementations to initialize and clean up any thread
specific structures. The current default hoard heap does not use these.
Note that the thread exit hook will not be called for the main thread as
the heap may be needed during process termination (__cxa_finalize for
example).
Change-Id: I703fbd34dec0d9029d619a2125c5b19d8c1933aa
Reviewed-on: https://review.haiku-os.org/799
Reviewed-by: waddlesplash <waddlesplash@gmail.com>
This file is included, directly or indirectly, by most of the
kernel-space C++ code, and so importing the entirety of "std"
seriously pollutes the global namespace.
So instead, just import "std::nothrow", which is the only thing
we really want in the global namespace. Tested on both GCC2
and GCC7 and seems to work just fine.
While I'm here, also update the include guards and copyright
header to match the standard format used elsewhere.
I need this to use loopers in WebKit, which spawns threads and expects
to be able to turn them into event loops later on.
This is the pattern already used in BApplication, we may as well make it
available elsewhere.
Change-Id: I5939ca89d33cb3bcc92567b302c2038d976af598
Reviewed-on: https://review.haiku-os.org/735
Reviewed-by: Axel Dörfler <axeld@pinc-software.de>
Reviewed-by: waddlesplash <waddlesplash@gmail.com>
Use BStackOrHeapArray instead of using auto_ptr to array.
Change-Id: I171cb002829c36ec51ba7d1e387869263e2a40f2
Reviewed-on: https://review.haiku-os.org/745
Reviewed-by: Adrien Destugues <pulkomandy@pulkomandy.tk>
* We try to conform to what ffmpeg does, it is
unuseful to support metadata keys formats which
aren't really used anywhere.
* Add TODO with some infos for future improvements.
* Namespaces protect symbols, I didn't consider that when adding
the BCodecKit namespace, so, the AddOnManager complained that
instantiate_plugin() was missing. A macro is introduced that allow
plugins to specify it's className, version and name, this ease
the declaration of the plugin symbols, otherwise the function
should have been declared inside the BCodecKit namespace which
we would like to avoid.
* The code is also more future proof, since in future the AddOn manager
can begin to check for plugin versions.
Fix 'true / false' value is implicitly cast to the integer type.
Change-Id: I2f72fcd34d2d97d20e2a98ed5efe25919a485c9d
Reviewed-on: https://review.haiku-os.org/739
Reviewed-by: Jérôme Duval <jerome.duval@gmail.com>
* This should be probably uniformed with the future
media kit format defs. Not sure why those formats are
separated and used only by the codec kit. Eventually,
if needed can be changed to some name that differentiate
them better than media defs.
* Move to BCodecKit namespace and make extensive use
of BCodecRoster.
* This is a first step in the right direction of
decreasing private dependencies. Some APIs are being
translated to the CodecKit. I am doing an investigation
on which APIs are really used among apps, so that the new
kit can be more slim and oriented toward easy development
and can be extended in the right direction instead to
continue maintaning unuseful code.
* BMediaFormats needs still a bit of love.
* General improvements in style and code maintainability.
This allows Clang builds (linked with our cross binutils) to
at least start runtime_loader and then try to load launch_daemon.
That fails with an infinite loop somewhere...
This doesn't fully work yet (the FS code in libroot_build
needs to be adapted, as some of the symlink-related calls
are not available on MinGW), but it gets much further than
the "Cygwin" target did.
These have been broken for a long time. Some Cygwin changes that
are relevant on MinGW are kept here, but users on Windows who
want to build Haiku should probably use WSL at this point.
However, now that we are using relative paths and don't need
to worry about drive path kludges, it's actually possible to
get some host tools built on MinGW. Changes for that coming.