This module provides an interface for drivers to use to perform calls
to the BIOS (only really for use by graphics drivers which need to use
the VESA BIOS). It uses the x86emu library from X.org which emulates
a real mode x86 CPU. This is necessary for x86_64 as virtual 8086 mode
no longer exists there.
Uses the x86 architecture code, made fixes to printf formats and a
couple of 64-bit fixes. Only potentially intrusive change is that I've
changed PCI.h to use uint32 rather than ulong. I don't see any way
this would cause any issues, though.
Haiku implements file locking at vfs level. That would not work for remote
and shared file systems, since they need to negotiate locks with peers.
This patch introduces three additional hooks in fs_interface that allow
file system module to take over the management of file locks.
recv on UDP sockets is not interrupted when the socket is closed.
Additionaly, signals do not interrupt kernel threads, that is why
new function interrupt_thread was implemented in order to cancel
listener thread.
I commited... need to get back into the habbit, sorry for the noise.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@42961 a95241bf-73f2-0310-859d-f6bbb57e9c96
by "jarz" to rewrite the last remaining (?) headers in order
to get rid of the Be copyright. Thanks a lot and sorry for the
long delay.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@42958 a95241bf-73f2-0310-859d-f6bbb57e9c96
See http://www.acpica.org/download/changes.txt done after 2010-10-13 for info on ACPI changes.
* Adapted the embedded controller to match current FreeBSD one.
There will probably be some issues with these changes initially.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@42637 a95241bf-73f2-0310-859d-f6bbb57e9c96
available as a module function as well.
* Remove some unneeded resetting from tty_destroy_cookie.
* Move the public module functions to the public API section of the file and
order them by their declaration order in the module info.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@42154 a95241bf-73f2-0310-859d-f6bbb57e9c96
partition_module_info::uninitialize().
* Implemented the hook for BFS.
* Implemented KFileSystem::Uninitialize().
Fixes failure to initialize a BFS initialized device with an intel partition
map.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@42142 a95241bf-73f2-0310-859d-f6bbb57e9c96
from settings retrieved through get_{current|possible}_resources().
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@41382 a95241bf-73f2-0310-859d-f6bbb57e9c96
turns out to be flaky, is a little bit of a hack anyway and performs unnecessary
operations. The functionality is now handled kernel side which optimizes those
problems away.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@41372 a95241bf-73f2-0310-859d-f6bbb57e9c96
the base bus number and segment which is what we're using them for. It should
work generically, however I only tested it to look up PCI bridge devices.
The logic is a subset of what is done in AcpiEvPciConfigRegionSetup when setting
up the operation region for a PCI device.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@41365 a95241bf-73f2-0310-859d-f6bbb57e9c96
the cached pci_info and writes the new value into PCI config space. Drivers
using either mechanism to enumerate devices will therefore get the updated
value.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@41364 a95241bf-73f2-0310-859d-f6bbb57e9c96
* Some automatic whitespace cleanup.
This makes the interrupt model change via kernel actually work.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@41340 a95241bf-73f2-0310-859d-f6bbb57e9c96
* ACPI module now has a get_possible_resources function.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@41320 a95241bf-73f2-0310-859d-f6bbb57e9c96
drivers in the future, such that NetworkStatus and similar software can show
nice names for the devices. The device manager should implement this and
return the B_DEVICE_PRETTY_NAME of the device (and in turn, new style drivers
should actually set this).
* Implemented handling of this ioctl in the scsi_periph to return the vendor/
product strings.
* Implemented this in the ATA bus manager to return the model from the info
block.
* KDiskDevice now fills in the partition_data::name if the B_GET_DEVICE_NAME
succeeds.
* As a side effect, at least BootManager now shows the drive name; maybe
DriveSetup does as well for the raw device.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@40231 a95241bf-73f2-0310-859d-f6bbb57e9c96
Renamed USB_CDC_*_PARITY and USB_CDC_*_STOPBIT* to follow the usual
naming pattern.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@40091 a95241bf-73f2-0310-859d-f6bbb57e9c96
* A lot of HID definitions got extracted from USB_hid.h into their
own files. Many more definitions have been added from the specs.
* The names have been moved into the proper B_* namspace.
* The USB hid driver has been adapted for the changes.
Thanks a lot and sorry for the delay!
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@39874 a95241bf-73f2-0310-859d-f6bbb57e9c96
and doesn't come with BeOS backwards compatibility. It also has the BeOS
compatibility ioctl ops removed and such. I've actually made this back in april,
so I don't really remember any more details.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@39760 a95241bf-73f2-0310-859d-f6bbb57e9c96
Embedded Controller still needs some looking into, and I had to remove the WIP code for dumping MADT.
Both are on my TODO.
Also removed a lot of unneeded parts of ACPICA from trunk and did some cleanup in Jamfile.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@39565 a95241bf-73f2-0310-859d-f6bbb57e9c96
restrictions for virtual/physical addresses.
* vm_page_allocate_page_run():
- Fixed conversion of base/limit to array indexes. sPhysicalPageOffset was not
taken into account.
- Takes a physical_address_restrictions instead of base/limit and also
supports alignment and boundary restrictions, now.
* map_backing_store(), VM[User,Kernel]AddressSpace::InsertArea()/
ReserveAddressRange() take a virtual_address_restrictions parameter, now. They
also support an alignment independent from the range size.
* create_area_etc(), vm_create_anonymous_area(): Take
{virtual,physical}_address_restrictions parameters, now.
* Removed no longer needed B_PHYSICAL_BASE_ADDRESS.
* DMAResources:
- Fixed potential overflows of uint32 when initializing from device node
attributes.
- Fixed bounce buffer creation TODOs: By using create_area_etc() with the
new restrictions parameters we can directly support physical high address,
boundary, and alignment.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@37131 a95241bf-73f2-0310-859d-f6bbb57e9c96
map_physical_memory()'s physicalAddress parameter type from void* to
phys_addr_t. This breaks source compatibility, but -- as long as
phys_{addr,size}_t remain 32 bit wide -- keeps binary compatibility with
BeOS.
* Adjusted all code using the affected interfaces (Oh what fun!). Added a few
TODOs in places where the wrong types (e.g. void* for physical addresses
are used). Looks like quite a few drivers aren't 64 bit safe and others
will break with PAE.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@36960 a95241bf-73f2-0310-859d-f6bbb57e9c96
* Removed irq_routing struct from ACPI.h to where it is used. Might be able to use acrestype.h instead of duplication.
* Disable old embedded controller and remove it from image.
* Move embedded controller code to busmanager module.
* Remove (some) code duplication
Should work as before, but is now initialized right after the bus manager. Can probably remove further code duplication.
I hope I've done it correctly, feedback is most welcome.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@36420 a95241bf-73f2-0310-859d-f6bbb57e9c96
* Exposed ACPI API needed by Embedded Controller
This will be removed again if moved inside the bus manager.
It also duplicates ACPI's own headers so it might go out of sync atm.
* Added mutex to controller and fixed the mixup between acpi_status needed in int handlers and Haiku status.
* Major code cleanup
Not for headers as they are mostly redundant if we move the controller.
Variable names still needs some cleanup
This makes the ACPI errors from the controller understandable. I get AE_NO_HARDWARE_RESPONSE now.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@36318 a95241bf-73f2-0310-859d-f6bbb57e9c96
* Implement such a module for x86 which currently exports only an MSI API.
* Implement the PCI part for configuring and enabling MSIs.
* Some automatic whitespace cleanup.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@36223 a95241bf-73f2-0310-859d-f6bbb57e9c96
to avoid recurring problems during migration of subversion checkouts
(restored binary files that were garbled by subversions during checkout)
* added appropriate svn:mime-type property for problematic (binary) files
* removed a single (mistyped) svn:mimetype property
* dropped svn:eol-style property for cleanup (they all contained 'native')
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@33670 a95241bf-73f2-0310-859d-f6bbb57e9c96
documentation found in those headers - this stuff should go into the Haiku
Book instead (although I'm not even sure the USB_rle.h, and midi_driver.h
are really needed any longer).
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@32901 a95241bf-73f2-0310-859d-f6bbb57e9c96
* Rewrote PartitionMapWriter
* Updated style to match current style guide for the intel partitioning system.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@32235 a95241bf-73f2-0310-859d-f6bbb57e9c96
* Reverted r31809 as it introduced a race condition; if the I/O request had been
notified, it could already been deleted at that point.
* Instead, we need to notify the request in each file system/driver that uses
it. Added new notify_io_request() function that does that exactly.
* Added a TODO comment to the userlandfs where the request notification needs
a bit more thought.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@31903 a95241bf-73f2-0310-859d-f6bbb57e9c96
introduced earlier.
* Reworked the previous device classes to make them ProtocolHandlers handling
their respective input_server <-> driver protocol.
* Implement setting report item data and building/sending reports based on that.
* Remove the old HID parsing code.
This enables us to use all HID devices as we now parse and use the HID
descriptors/reports. Non-boot-porotocol devices should therefore work.
The next step will be to implement a generic input/output framework in userland
that can communicate with a generic protocol handler in usb_hid. This will then
enable applications to make use of all the non-mapped HID stuff directly.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@31790 a95241bf-73f2-0310-859d-f6bbb57e9c96
KPartition::CreateChild(). CreateChild() calls AddChild(), which publishes
the new partition, though at that point offset and size were not set, so that
the published devices would not be usable.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@31463 a95241bf-73f2-0310-859d-f6bbb57e9c96
- Now also use the acpi handle to call a function and not use the path to get a handle and then call the function.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@31101 a95241bf-73f2-0310-859d-f6bbb57e9c96
* Copied ide_adapter.h as ata_adapter.h in attempt to further
separate the two stacks.
* Continued renaming stuff in drivers/bus/ATA.h
* Make all the busses/ata drivers include the new headers,
specifically ata_types.h, ata_adapter.h and bus/ATA.h,
they were all including ide_types and bus/IDE.h still
* Some renaming of global variables for coding style consistency
* Removed the promise driver from the build, it's not used on the
image and I don't believe it compiled even for the old IDE stack.
* There is no more Command Queueing in the new ATA stack, so I
removed the capability indication from the busses/ata drivers
and ata_adapter.h.
The new ATA stack still boots fine on my computer and I proof-read
the diff like two times. Basically, this was a careful search&replace
job only. The only things I am not sure about is renaming some
publishing related strings, but it seems to all work fine.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@30700 a95241bf-73f2-0310-859d-f6bbb57e9c96
pointed out, there is also an unsolvable race condition with BFS that other
file systems should share.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@30204 a95241bf-73f2-0310-859d-f6bbb57e9c96
but doesn't really do anything more than before.
* It also replaces everything IDE with ATA counterparts and cleans up a lot
of the definitions.
* Cleaning up the old ATA bus_manager as well as some license headers missing.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@30049 a95241bf-73f2-0310-859d-f6bbb57e9c96
newly created dir. The VFS really doesn't need it and for some file systems
it might not be easy to get by. Several file systems (e.g. rootfs and fat)
were ignoring the parameter anyway.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@29719 a95241bf-73f2-0310-859d-f6bbb57e9c96
IORequest.{h,cpp}.
* Introduced public <io_requests.h> header. Currently it only declares the
single function BFS uses.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@29446 a95241bf-73f2-0310-859d-f6bbb57e9c96
needed at all when used as intended. Thanks Ingo for the explanation on how this
is intended to work. Adjusted the overlay fs accordingly and updated/reverted
the changes to the other filesystems.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@29250 a95241bf-73f2-0310-859d-f6bbb57e9c96
been mounted. This is to allow layered filesystems to setup internal data that
requires all the sub/super volumes to be available.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@29248 a95241bf-73f2-0310-859d-f6bbb57e9c96
It causes the interrupt handler to be inserted at the very end of the list
instead of at the top. It is intended to be used as a workaround when a
interrupt handler cannot know if it actually handled the interrupt. This
should never be used by native drivers. Also if we know that the result is
not valid because of this flag we won't disable the vector in case we count
many unhandled interrupts as those numbers are then unreliable.
* Moved B_NO_LOCK_VECTOR to be a private flag as well.
* Made the interrupt handler list a simple manually maintaned singly linked list
instead of the doubly linked one used with insque and remque as it greatly
simplifies things for such an easy use case and is more compact.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@29241 a95241bf-73f2-0310-859d-f6bbb57e9c96
* Remove the previous method of applying the overlay by flags. In the future the
overlay can just be mounted as a filesystem layer. This is probably how layers
were intended to work in the first place.
* Move the filesystem module info and filesystem name from the fs_mount to the
fs_volume structure. Filesystem layering is done by having multiple layered
volumes and we want to be able to have a different fs per layer.
* Adapt VFS code to this move.
* Implement mounting layered filesystems. Specifying multiple filesystems
separated by a colon on mount will cause the layers to be set up and the
corresponding filesystems to be mounted at that layer.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@29199 a95241bf-73f2-0310-859d-f6bbb57e9c96
node. That is needed for a layered filesystem to be able to construct a full
fs_vnode out of a volume/inode pair.
* Adapt places where get_vnode is used. Sadly this is a C API and we can't just
use a default NULL for that argument.
* Introduce a flag B_VNODE_WANTS_OVERLAY_SUB_NODE that can be returned in the
flags field of a fs get_vnode call. A filesystem can use this flag to indicate
that it doesn't support the full set of fs features (attributes, write support)
and it'd like to have unsupported calls emulated by an overlay sub node.
* Add a perliminary overlay filesystem that emulates file attributes using files
on a filesystem where attributes aren't supported. It does currently only
support reading attributes/attribute directories though. All other calls are
just passed through to the super filesystem.
* Adjust places where a HAS_FS_CALL() is taken as a guarantee that the operation
is supported. For the overlay filesystem we may later return a B_UNSUPPORTED,
so make sure that in that case proper fallback options are taken.
* Make the iso9660 filesystem request overlay sub nodes. This can be fine tuned
later to only trigger where there are features on a CD that need emulation
at all.
If you happened to know the attribute file format and location you could build
an iso with read-only attribute support now. Note that this won't be enough to
get a bootable iso-only image as the query and index support is yet missing.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@29177 a95241bf-73f2-0310-859d-f6bbb57e9c96
add the const in any case. As Axel points out these are C functions and we do
not affect binary compatibility by changing their signature.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@29124 a95241bf-73f2-0310-859d-f6bbb57e9c96
* Replaced the use of offsetof() for structs that aren't PODs. Add a
offset_of_member() macro to util/khash.h because that's what it's used for
in our cases.
* Change the signature of add_debugger_command()/remove_debugger_command() on
GCC > 2 to avoid the depricated conversion from string constants to char *.
* Adding some "suggested" parenthesis. I know that not everyone likes that, but
it pointed out at least one bug that is fixed here as well.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@29113 a95241bf-73f2-0310-859d-f6bbb57e9c96
discarding their changes. This functionality currently only works correctly
when no transactions are used.
* Started test application for the block cache, doesn't do anything yet.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@28496 a95241bf-73f2-0310-859d-f6bbb57e9c96
enumeration (getting roothubs, enumerating child devices and detecting device
topology) and hub port management (resetting and disabling ports). These were
laying around for quite some time.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@27768 a95241bf-73f2-0310-859d-f6bbb57e9c96
wake vector (not tested at all).
* Removed disabling interrupts when entering the sleep state - looks like
ACPI still needs memory then.
* Cleanup.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@27403 a95241bf-73f2-0310-859d-f6bbb57e9c96
vector at the end of the file will be aligned to the given value.
* BFS uses an alignment of 512 bytes (should be block size of the
underlying device or BFS block size, whatever is less), which should
be fine, since file data are only stored in BFS blocks. This totally
avoids any partial operations at the I/O scheduler level, thus saving
disk operations. Not that I could measure any performance difference.
Theoretically it should help a lot though, particularly when dealing
with lots of small files, since we avoid using bounce buffers, which
are (a) limited in number and (b) require copying of the data.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@27246 a95241bf-73f2-0310-859d-f6bbb57e9c96
- B_GET_ICON_NAME: returns the name of an icon. This will then be read from
a predefined location on disk (not yet implemented). This would also allow
to add specifiers like "-boot", or "-fat|bfs|ntfs|...", and have special
icons for those.
- B_GET_VECTOR_ICON: retrieves the vector icon of a device, if any.
* get_device_icon(BBitmap*, ...) now supports other color spaces than B_CMAP8.
* Added get_device_icon(), BPartition::GetIcon(), and BVolume::GetIcon()
variants that can also retrieve the icon data directly (like
BNodeInfo::GetIcon()).
* Reenabled the previous BPartition::GetIcon(), based on a patch by
Justin O'Dell - this fixes#1391.
* Tracker's MountMenu class now uses B_RGBA32 icons, instead of B_CMAP8.
* Added vector icon to scsi_disk, and scsi_cd. The former doesn't have any
special removable icon, though.
* Header cleanup, added/updated license, whitespace cleanup.
* Marked deprecated/obsolete driver ioctls in Drivers.h.
* Removed OpenBeOS namespace in the headers I touched that still had them.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@27001 a95241bf-73f2-0310-859d-f6bbb57e9c96
our dma_restrictions structure (but we're using blocks instead of bytes,
since unlike the block size, the restrictions attributes are constant).
* We might want to use blocks for the dma_restrictions structure as well in
the future...
* Fixed another bug in the device_node variant of DMAResource::Init(): the max
segment size was specified in blocks as well.
* Removed the "hardcode" block_io module and header.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@26973 a95241bf-73f2-0310-859d-f6bbb57e9c96
architecture: for now, we do this on the lowest layer only, therefore all
requests are handled synchronously (ie. in the scheduler's thread).
* Instead of using the block_io module, scsi_disk (and scsi_cd) are now
exporting a device on their own, and use an I/O scheduler with an appropriate
DMA resource.
* There are still lots of TODOs, and it can easily panic - don't update if
you intend to demo Haiku.
* scsi_periph now only has an io() function that get an io_operation, instead
of the previous read/write functions, moved preferred CCB size from those
functions into the device registration.
* Changed all scsi_periph files to C++.
* scsi_cd ported, too, but untested.
* Removed block_io from image - it will be removed completely soon.
* Temporarily commented an ASSERT() in the ATA bus manager (in case you use
it); it's sometimes triggered by the code now, and I haven't yet looked into
the issue -- doesn't seem to harm, at least.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@26828 a95241bf-73f2-0310-859d-f6bbb57e9c96
* Added file_map_set_mode() function that you can use to keep a whole file
cached. This is needed for the swap file support: FILE_MAP_CACHE_ALL will
not only precache all file_io_vecs when called, but it will also cause all
file_map_translate() calls to fail that would require further caching (ie.
if the file size had changed).
* Updated the fs_shell file map code to the latest one (with several bug fixes).
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@26785 a95241bf-73f2-0310-859d-f6bbb57e9c96
actual caching in the file cache, i.e. all reads and writes go directly
to the underlying device. The implementation is not quite complete,
since the VM can still add pages to the cache when the file is mmap()ed,
which can lead to inconsistencies.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@26779 a95241bf-73f2-0310-859d-f6bbb57e9c96
inode - unlike get_vnode() the busy flag won't prevent you from getting that
reference.
* Changed put_vnode() to return an error in case the vnode couldn't be found.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@26713 a95241bf-73f2-0310-859d-f6bbb57e9c96
partially (e.g. due to hitting the end of file). The respective
classes have grown new methods and attributes to deal with that. The
"finished" callbacks have got additional parameters to indicate
whether the transfer was only partial and how much has been
transferred. Other callbacks and functions have a size_t* in/out
parameter instead of a simple size_t, now.
* vfs_{read,write}_pages() do now use the I/O request framework instead
of the underlying FS's {read,write}_pages() hooks (those should be
unused now). Furthermore they've got an additional "flags" parameter,
which is passed to IORequest::Init(), i.e. it allows to specify that
the given vecs refer to physical addresses.
* The file cache's read_into_cache() reads directly into physical
pages, now.
* Fixed bug in DoIO::IO(): The offset was not adjusted, so that all
pages were incorrectly transferred from/to the same location.
* Fixed broken subrequest scheduling loop head in
do_iterative_fd_io_iterate().
* Adjusted the test driver and implemented its io() hook. Using this
driver I/O requests are passed all the way from the VFS/VM to the
driver and through the I/O scheduler. It even seems to work. :-)
* Added missing const to the iovec* parameter of the IORequest::Init()
methods.
* Disabled some debug output by default. Added new optional debug
output.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@26692 a95241bf-73f2-0310-859d-f6bbb57e9c96
to provide asynchrounous (or only synchronous, if asynchronous is not
supported) I/O request support. It will eventually replace
{read,write}_pages(). None of the FS implementations implement them
yet.
* Implemented some support functions for request-based I/O. File system
implementations can use do_fd_io() which passes an I/O request to the
layer responsible for a given FD, and do_iterative_fd_io(), which
translates a request for a file to subrequests for the underlying
device and passes them on. Both fall back to synchrounous processing
when the io() hook is not supported.
Furthermore added vfs_synchronous_io() which should be handy for the
devfs to perform io_requests synchronously for devices that don't
support the io() hook.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@26655 a95241bf-73f2-0310-859d-f6bbb57e9c96
get_memory_map(), but has a saner semantics and allows specifying a
team.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@26600 a95241bf-73f2-0310-859d-f6bbb57e9c96
using a lock and I'm not very much in favor of a global one.
* Added "finished" callback to IORequest.
* IOOperation::Finish() no longer invokes its parent request's
ChunkFinished(). The finisher does this instead. ChunkFinished()
can optionally remove the chunk from the parent.
* Added IORequest::Wait() which waits for the completion of the request.
* Introduced IORequestChunk::ResetStatus() to make setting the status to
"pending" somewhat more explicit.
* Implemented the missing IOScheduler::SetCallback() methods.
* The NotifyAll() calls on the IOScheduler's condition variables were
missing, so it just waited forever.
* Added some more debug output.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@26597 a95241bf-73f2-0310-859d-f6bbb57e9c96
fs_vnode_ops::write_pages() to be called with fsReenter = true. Since
this is no longer the case, the argument has become superfluous. For
read_pages() it always was. Removed the argument from the functions
and all functions that propagated it.
* Some whitespace at the end of lines was removed.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@26579 a95241bf-73f2-0310-859d-f6bbb57e9c96
This allows drivers to lock the memory outside of the original team context.
* create_area_etc() got a struct team as first argument, but that should have
been a team_id.
* Removed delete_area_etc() - there is already vm_delete_area() doing the same
thing.
* Renamed vm_get_address_space_by_id() to vm_get_address_space(), as there is
no other method of getting an address space.
* Removed erroneous white space.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@26455 a95241bf-73f2-0310-859d-f6bbb57e9c96
used by file systems to get a useful name, if the file system (or just
that specific volume) doesn't have one.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@26403 a95241bf-73f2-0310-859d-f6bbb57e9c96
systems can get the partition they reside on easily.
* Updated TODO.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@26401 a95241bf-73f2-0310-859d-f6bbb57e9c96
B_DEBUG_SPINLOCK_CONTENTION is defined to 1. It typedefs spinlock to a
structure (thus breaking BeOS binary compatibility), containing a
counter which is incremented whenever a thread has to wait for the
spinlock.
* Added macros for spinlock initialization and access and changed
code using spinlocks accordingly. This breaks compilation for BeOS --
the macros should be defined in the respective compatibility wrappers.
* Added generic syscall to get the spinlock counters for the thread and
the team spinlocks.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@25752 a95241bf-73f2-0310-859d-f6bbb57e9c96
* Renamed scsi_dsk to scsi_disk.
* Joined all scsi_disk sources together to a single scsi_disk.cpp file.
* Cleanup.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@25737 a95241bf-73f2-0310-859d-f6bbb57e9c96
* Moved devfs from fs/ to device_manager/, and separated the legacy driver
support from it.
* Removed fast_log module.
* There are a couple of (temporary) regressions, though:
- legacy SATA and ISA IDE support is disabled, the drivers haven't been
ported yet.
- The not yet used ATA bus manager hasn't been ported yet, either.
- AHCI changes have not been tested.
- the listdev command has been removed from the build (as it currently
doesn't work anymore).
- device manager generated IDs currently are not freed anymore when a device
node is removed.
- generic drivers can't yet use the new driver architecture.
- simple busses that do not support device types won't work yet.
- legacy driver publishing/unpublishing (ie. what USB needs) has not been
tested, and may be broken.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@25662 a95241bf-73f2-0310-859d-f6bbb57e9c96
* Added BDiskDeviceRoster::GetDiskSystem() method, that can get a disk system
by short/pretty/module name - since they should all be unique, I put them
in a single namespace, please complain if you don't like that :-)
* Cleaned up DiskSystem.h and DiskDeviceRoster.h according to the updated
header guidelines.
* Renamed ntfs pretty name from "ntfs File System" to "Windows NT File System".
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@25414 a95241bf-73f2-0310-859d-f6bbb57e9c96
- use the dano version by default
- s/ddraquire/ddaquire/
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@25203 a95241bf-73f2-0310-859d-f6bbb57e9c96
- the dano version is exposed as v1.1 so drivers can use select with a simple ifdef
- add copyrights from the tty driver as I'll be copying code from it.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@25201 a95241bf-73f2-0310-859d-f6bbb57e9c96
* Also removed the header files that belong to those files.
* Only kept the userland_ipc.h header for now, to remember us about the
former userland server driver (that I also removed - it can always be
resurrected from SVN if needed).
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@25045 a95241bf-73f2-0310-859d-f6bbb57e9c96
suffix. You can use this to verify the version of a module_info structure.
* Made module_info::std_ops optional.
* Minor cleanup in module.h.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@24873 a95241bf-73f2-0310-859d-f6bbb57e9c96
API, uses the _PRINTFLIKE macro where appropriate.
* Got rid of the "qent" structure, struct timer now contains everything we
need. This makes the affected code in sem.cpp, signal.cpp, and timer.c much
cleaner, and resolves a few TODOs.
* Minor cleanup in vfs.cpp.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@24871 a95241bf-73f2-0310-859d-f6bbb57e9c96
- Moved most file_system_module_info hooks into separate structures.
Those that operate on mounted volumes to fs_volume_ops, those
operating on a vnode to fs_vnode_ops.
- Got rid of the fs_volume, fs_cookie, fs_vnode typedefs. We use void*
again.
- Instead of a void* volume and node cookie hooks are passed a
fs_volume and fs_vnode structure pointer, which contain the cookie
and an ops pointer (fs_volume a few more things).
- The VFS {new,publish,get,...}_vnode() functions take a fs_volume*
instead of the volume ID. So does vfs_get_fs_node_from_path().
- Added type and flags arguments to publish_vnode() and the
get_vnode() hook and removed the type argument from lookup() hook.
Added vnode::type using formerly unused bits to store the node type.
Simplified a few things in the VFS due to the now always available
node type.
- Added fs_volume_ops::{create,delete}_sub_vnode() and
fs_vnode_ops::get_super_vnode() hooks. They are used to support file
system layers, e.g. allowing to extend an FS not supporting BeOS
attribute with attribute support. Needs some more work in the VFS.
- Added fs_vnode_ops::create_special_node() hook for creating special
nodes (e.g. FIFOs).
* Adjusted the built-in file systems and BFS according to the interface
changes. Removed all other FSs from the image for the time being.
We'll see whether further API changes are necessary before porting
them.
* Adjusted the bfs_shell accordingly.
* Implemented create_special_node() in rootfs to support special nodes.
* Added support for FIFOs:
- Added syscall _kern_create_fifo() (used by mkfifo()), which creates
a special node (type S_IFIFO) in the respective file system.
- When a special node is published the VFS creates a respective sub
node. Currently only FIFOs are supported.
- Added a little support for FIFO subnodes by using functionality from
the pipefs.
- Added mkfifo to the image. It can create FIFOs in the rootfs, but
the FIFOs aren't really usable ATM, since they still work like
pipes, i.e. readers and writers need to have them open at the same
time.
* Some smaller changes in the VFS:
- Made the *_CALL macros nicer to use (vargs).
- Refactored FS entry lookup into new function lookup_dir_entry().
- create_vnode() no longer just calls the FS create() hook. First it
looks up the entry and uses open_vnode(), if it already exists. This
is necessary for two reasons: 1) The FS might not support create()
while still allowing to open() entries. 2) When the FS has other
layers on to of it (or the respective node) it might not be
responsible for opening the node.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@24816 a95241bf-73f2-0310-859d-f6bbb57e9c96
of r24768 (block cache notification mechanism rewrite).
Thanks for the note, Vasilis!
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@24772 a95241bf-73f2-0310-859d-f6bbb57e9c96
hasn't been used for more than 2 seconds.
* Replaced the block_cache::lock benaphore with a recursive lock, so that
you can call cache functions from within the notification listeners.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@24737 a95241bf-73f2-0310-859d-f6bbb57e9c96
file system to not fill newly created space with zeros.
BFile::SetSize() now uses this, while [f]truncate() does not. This
is only a temporary work-around until BFS supports sparse files.
* Apps that want to reserve space to fill up later should use
BFile::SetSize() for now, as this will be a lot faster than
[f]truncate().
* cache_io() and the functions below now use a special mode when you
pass in a NULL buffer: for read access, the cache is only populated
(useful for prefetching), for write access, the file is filled with
zeros.
* Implemented BFS's Inode::FillGapWithZeros() using this method now.
* Removed extraneous white space.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@24555 a95241bf-73f2-0310-859d-f6bbb57e9c96
the former ones).
* Removed extraneous white space.
* net_server settings are now also updated when the size of the
file changed.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@24552 a95241bf-73f2-0310-859d-f6bbb57e9c96
When specified it desigantes that the interrupt handler should not lock the
vector with a spinlock when executing the installed interrupt handlers. This
is necessary to allow the same interrupt vector to be handled in parallel on
different CPUs. And it is required for the CPU halt to work synchronously when
there is more than one AP CPU. Though the acquire_spinlock() should cause IPIs
to be processed, only this fixed the SMP_MSG_FLAG_SYNC problem for me.
Not locking is safe as long as it is guaranteed that no interrupt handler is
registered or removed while the interrupt handler is running. We can guarantee
this for the SMP interrupt handlers we install in arch_smp_init() as they are
never uninstalled. Probably this flag should be made private though.
Restored the SMP_MSG_FLAG_SYNC when entering the kernel debugger.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@23838 a95241bf-73f2-0310-859d-f6bbb57e9c96
blocks into the new transaction, but it would set that transaction on all
blocks of the old transaction, too. Also, it did not correctly update the
num_blocks/sub_num_blocks fields of the old transaction. Even worse, it did
return B_OK instead of the ID of the new transaction...
* get_writable_cached_block() did not correctly maintain the number of blocks
in the sub transaction.
* write_cached_block() did not free the original_data of a block when it wrote
it back as part of a previous transaction.
* Changed "cookie" for cache_next_block_in_transaction() to "long", so it will
be 64 bits when needed.
* Improved the API for detaching sub transactions: you can now get the blocks
of only the main (parent) transaction as well, added new
cache_block_in_main_transaction() function.
* BFS now flushes the log when there is no space left for the current
transaction.
* _WriteTransactionToLog() allocated a "vecs" array, but never freed it.
* _WriteTransactionToLog() now also supports detaching the current sub
transaction if the whole thing is getting too large (it will now also panic
if that doesn't work out).
* Removed a useless optimization: making the blocks available in the cache
isn't really needed, as all blocks in a transaction are locked into the
cache, anyway.
* Implemented Transaction::WriteBlocks().
* Minor cleanup, removed some dead code, fixed warnings in the fs_shell's
block_cache when compiled with debug output on.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@23610 a95241bf-73f2-0310-859d-f6bbb57e9c96
transaction ends or has been aborted.
* BFS now listens for transactions when it created an inode to see if
the transaction will be aborted without freeing the inode (in which
case it will panic for now).
* Started implementing tracing support, but it's not working yet.
* Minor cleanup.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@23492 a95241bf-73f2-0310-859d-f6bbb57e9c96
the complete extent info or not.
* file_map_translate() now cuts down the request to the file bounds.
* Adjusted BFS and FAT to the API changes.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@22913 a95241bf-73f2-0310-859d-f6bbb57e9c96
that can be used by file systems.
* Changed the way the file cache works: instead of reading/writing to the
underlying device directly, it can now be used for any data source, ie.
also network file systems.
* As a result, the former pages_io() moved to the VFS layer, and can now be
called by a file system via {read|write}_file_io_vec_pages() (naming
suggestions are always welcomed :-)). It now gets an FD, and uses that to
communicate with the device (via its fs_{read|write}_pages() hooks).
* The file_cache_{read|write}() functions must now be called without holding
an I/O relevant file system lock. That allows the file cache to prepare the
pages without colliding with the page writer, IOW the "mayBlock" flag can
go into the attic again (yay!).
* This also results in a much better performance when the system does I/O and
is low on memory, as the page writer can now finally write back some pages,
and that even without maxing out the CPU :)
* The API changes put slightly more burden on the fs_{read|write}_pages()
hooks, but in combination with the file_map it's still pretty straight
forward. It just will have to dispatch the call to the underlying device
directly, usually it will just call its fs_{read|write}_pages() hooks
via the above mentioned calls.
* Ported BFS and FAT to the new API, the latter has not been tested, though.
* Also ported the API changes to the fs_shell. I also completely removed its
file cache level page handling - the downside is that device access is no
longer cached (ie. depends on the host OS now), the upside is that the code
is greatly simplified.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@22886 a95241bf-73f2-0310-859d-f6bbb57e9c96
This should help to reduce the number of warnings imported code will throw
during compilation (helps a lot with tcpdump, for example).
* Since long is 64 bit on 64 bit platforms, we might want to think about doing
that change for the Haiku types int32 and uint32 as well.
* Fixed several occurences of hidden type problems.
* Fixed build of the stack and TCP under BeOS.
* Fixed incorrect typedef in socket_interface.h.
* Minor cleanup.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@22643 a95241bf-73f2-0310-859d-f6bbb57e9c96
additional partition_data* child parameter now.
* _user_get_partitionable_spaces() doesn't need to copy the buffer into
the kernel, since it is no input parameter. It also copies back the
actual partitionable spaces count on error, now -- B_BUFFER_OVERFLOW
is returned when the buffer was too small, but then the count must be
returned too.
* Fixed several instances of syscall implementations that unloaded a disk
system, although they didn't load it in the first place. This screwed
up the load count with undesirable consequences.
* _user_create_child_partition() would set the size to the supplied
offset.
* Fixed broken loop in KPhysicalPartition::CreateShadowPartition().
* KPartition::RemoveChild() notified the listeners about the wrong
event.
* Intel partitioning module:
- The *_get_partitionable_spaces() correctly return B_BUFFER_OVERFLOW
now, if the supplied buffer is too small.
- Implemented a part of pm_shadow_changed(), which creates and updates
the PartitionMap, so that the validate_*() hooks have a chance to
work at all.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@22475 a95241bf-73f2-0310-859d-f6bbb57e9c96
physical partition, unlike get_partition() which returns the shadow
partition, if it exists.
* Added B_PARTITION_SHADOW[_CHILD] partition pseudo operation values for
the shadow_changed() hook, notifying a disk system, that a shadow
partition has been created.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@22472 a95241bf-73f2-0310-859d-f6bbb57e9c96
system initialize() hooks. It's often the only info about the
partition one needs and thus locking the partition just to get it is
no longer necessary.
* intel partitioning system:
- Removed passing around block sizes. We require 512 byte sectors
anyway. In fact using the parent partition's block size was even
wrong.
- Simplified writing the partition map sector.
- Simplified and corrected the partition map initialization.
- We don't fail identifying a partition anymore, if the partition map
contains no partitions. We would never identify a freshly
initialized partition map before.
- Made pm_identify() more intelligent: It determines the priority to
return depending on whether the partition is the device itself and
whether we have recognized child partitions.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@22447 a95241bf-73f2-0310-859d-f6bbb57e9c96
