* Assists on early boot platforms to install / upgrade when
no network is available.
* Doesn't introduce any additional dependencies
* Creates shine-though directories too.
Change-Id: I11dd207b2ffbae1768bab7a118a51034df238878
Reviewed-on: https://review.haiku-os.org/c/haiku/+/6185
Reviewed-by: Alex von Gluck IV <kallisti5@unixzen.com>
Tested-by: Automation <automation@haiku-os.org>
Reviewed-by: Fredrik Holmqvist <fredrik.holmqvist@gmail.com>
This will allow proper operation of POSIX SHM API (shm_open etc.).
Now memory files are stored fully in memory and do not affect disk
storage (except swap if enabled).
Change-Id: Iae3ce1afa968df72e82198e598a273cbf7cb0269
Reviewed-on: https://review.haiku-os.org/c/haiku/+/5802
Reviewed-by: Fredrik Holmqvist <fredrik.holmqvist@gmail.com>
Reviewed-by: waddlesplash <waddlesplash@gmail.com>
Tested-by: Commit checker robot <no-reply+buildbot@haiku-os.org>
Based on usb_ecm and other native USB ethernet drivers which share a
similar structure.
References used to implement this:
- FreeBSD urndis driver
- [MS-RNDIS].pdf v20140501
- Microsoft list of RNDIS OIDs
TODO:
- Better handling of "request id" field to make sure the replies we get
match up with the requests we sent, and it could allow to have
multiple requests in flight. However, the FreeBSD driver doesn't
bother to implement this, if you only ever have one request in flight
and wait for a reply before sending another, this isn't really needed.
- Endian safety, this code will only work on little endian systems for
now. Several structures sent/received to/from the device must be little
endian, so on big endian platforms a lot of byteswapping will be needed,
or the code rewritten to use some smarter object and not a plain
struct for all of these.
- Investigate if it's possible to send/receive multiple ethernet frames
in a single USB transaction for better performance. Our driver
structure doesn't really allow for it unless the driver implements
some buffering on its own.
Change-Id: I2c6dacf0c1aeb6c7c1c112e9b16a63e586ea979a
Reviewed-on: https://review.haiku-os.org/c/haiku/+/5281
Reviewed-by: Adrien Destugues <pulkomandy@gmail.com>
Tested-by: Commit checker robot <no-reply+buildbot@haiku-os.org>
It doesn't seem to work anymore, and it doesn't look to be particularly
maintained on FreeBSD's side of things. I think kallisti5 was the only
person who ever even attempted to use it.
libtermcap was deprecated in favor of terminfo in 2013; the library was
removed then, and this file was only left because not all optional
packages had yet been rebuilt against ncurses. Well, that has now
long been completed, and indeed all applications continue to function
even after removing /etc/termcap.
In case any legacy applications that I have missed still do need it,
it should be provided by HaikuPorts and not Haiku itself.
The other Atheros drivers are "atheros813x" and "atheroswifi",
so renaming this one (which is the oldest of the set) to match
the other two makes sense.
This reverts commit a0db7ef272.
This reverts commit 40cdf7d607.
This reverts commit 2ff22d6734.
This reverts commit b9eacd390d.
This partially reverts commit 5ae7ac5fd9.
This was all added in the run-up to the removal of the framebuffer driver,
or was added since then to enhance framebuffer-only support in that driver.
Change-Id: I32ab8199f22cf6846545ae19e943c98012b2a1d0
Reviewed-on: https://review.haiku-os.org/c/haiku/+/4615
Reviewed-by: waddlesplash <waddlesplash@gmail.com>
Change-Id: I44211b3533f99338d7246e88593fc8838628904c
Reviewed-on: https://review.haiku-os.org/c/haiku/+/4485
Reviewed-by: Alex von Gluck IV <kallisti5@unixzen.com>
Reviewed-by: Adrien Destugues <pulkomandy@gmail.com>
* virtio_mmio for riscv64,arm,arm64
* enable new FDT bus for riscv64,arm,arm64
Change-Id: I5141de4e0bfcb44c5368dfafdf68ebf06ca5fb93
Reviewed-on: https://review.haiku-os.org/c/haiku/+/4063
Reviewed-by: Jérôme Duval <jerome.duval@gmail.com>
Once change 2342 is in place (running first boot scripts exported from
packages), see https://review.haiku-os.org/c/haiku/+/2342,
remove data/system/boot/post_install/add_catalog_entry_attributes.sh
and related support infrastructure (magic files, launch_roster entries).
The work this script did can in fact be done at image creation time
instead of at first boot.
Change-Id: I485e1a0a87c3e6a6ba3f882e65996f2327134d37
Reviewed-on: https://review.haiku-os.org/c/haiku/+/3751
Reviewed-by: Adrien Destugues <pulkomandy@gmail.com>
And remove Mouse, Keyboard and Touchpad.
Userguide and localizations will need to be updated.
Change-Id: I4543b2b63367cd13562c542610bad34b5934b103
Reviewed-on: https://review.haiku-os.org/c/haiku/+/2210
Reviewed-by: waddlesplash <waddlesplash@gmail.com>
Now provided in the tnftp package.
Change-Id: I862b1ff98586aa0e5a9418cf26e30b7136140249
Reviewed-on: https://review.haiku-os.org/c/1641
Reviewed-by: waddlesplash <waddlesplash@gmail.com>
This one had an uncertain "freeware" license, and the code quality
is not so great. BeOS didn't have an 'uptime' command, so we can
replace this with the coreutils one without worry.
We don't include the wpa_supplicant on the minimum image, so
these aren't very useful (it seems one needs the wpa_supplicant
to connect even to an unsecured network, with our setup.)
Anyone who needs one of these and also has a reason to use the
minimum image can easily add them back via their UserBuildConfig.
This replaces the old Haiku-native driver that was removed in the last commit.
It should support all the same chips that one did, in addition to the SiS 7014,
and the DP83815 also.
I don't have this hardware, so for anyone who does, please test.
Fixes#1657.
The lowest model number supported by this driver is "3160", but that's just
Intel's insanity: the 7260 was released the quarter before it. So following
our naming convention strictly, "7260" is the correct name for this driver.
The firmware situation for this one is also a little different. Unlike past
instances where Intel has released mostly nonsubstantial firmware updates,
allowing us to just copy a recent-ish version from the iwlwifi archives,
the firmware is more closely tied to the driver in this series. As a result,
some of this firmware is not even used by Linux yet (they're a few versions
behind it seems), so the firmware packages included here come from FreeBSD.
One major hardware feature - RX of multiple frames at a time - is disabled
in this commit, as it depends on mbuf reference-counting, according to the
FreeBSD developers I asked, which we do not implement yet. I'll hopefully
get to looking at that in the next few weeks.
And with that, I finally have WiFi on my primary laptop, my original reason
for setting out on this quest last year. This commit was pushed through it,
even :)
Per #10267, "Most (ported) third-party software should be removed
from the Haiku source repository."
Since HaikuPorts already has the ncompress package, this file
should no longer exist.
Signed-off-by: Augustin Cavalier <waddlesplash@gmail.com>
Original patch missed modifying the "minimum" definition and the
src/bin/Jamfile, so I took care of that.
I wrote this back in 2010 as my first driver project.
Reasons to remove it:
* The license is GPL
* Current WiMAX hardware is generally WIFI based.
* It controlled the hardware, but never worked
for network access since we need SSL certs and stuff
which vendors weren't too open with.
* WiMAX kind of died (at least in the US)
I left the wwan directory, it would be a nice spot
for CDMA / GSM dongle drivers.
libmedia.so was used by at least 2 apps included in the minimum image,
Activity Monitor and Deskcalc which subsequently failed to load on minimum.
Deskcalc wasn't actually using libmedia.so so I managed to get it to link and
run on minimum, however, Activity Monitor is using libmedia.so so needed it
to be present.
To fix this I added libmedia.so to the minimum image, I hope this does not blow
its size budget. (adds 1.0MB)
* Hasn't been used for quite some time
* Everything was ported over to a new ATA stack
some time ago.
* No huge regressions were seen from the new ATA
stack.
* The app_server isn't designed to support two fallback drivers, so
on systems using UEFI to boot, the framebuffer driver will often
win when other drivers would likely work on those systems.
This is separate to the VESA driver, as the VESA driver requires
using the VBE BIOS. Under UEFI, we don't have the VBE BIOS, nor
are we able to switch modes after leaving UEFI Boot Services, so
a dumb framebuffer driver seemed like the easier way to approach
the problem.
The framebuffer & vesa drivers now test for the presence of the
VESA_MODES_BOOT_INFO boot item to distinguish between which driver
to use. Also added check for the VESA mode count to determine
whether to add the VESA_MODES_BOOT_INFO item.
UEFI video updated to explicitly zero out the VESA and EDID
boot data.
- B_TRIM_DEVICE on a ram disk frees all requested pages. Reading from a
trimmed page returns all 0s. This can be used with fstrim to release
memory for the parts not used by the filesystem, without unregistering
then registering the device.
- Add icon and ioctl to get it.
- Add it to the image, because it works reasonably well and there is no
reason not to include it.
- Add subfolder src/kits/debugger which contains the debugger's core
functionality and lower layers. Correspondingly add headers/private/debugger
for shared headers to be used by clients such as the Debugger application
and eventual remote_debug_server. Adjust various files to account for
differences as a result of the split and moves.
- Add libdebugger.so to minimal Jamfile.
Signed-off-by: Augustin Cavalier <waddlesplash@gmail.com>
This is a squash of the 42 commits by @mshlyn, as I couldn't find a
way to break them into logical chunks. I did not include these in the build,
as it appears that they only partially work anyway, and much more cleanup is
still needed. However, this is a huge improvement on what was in the tree
before, which looked horrendous and didn't even compile (as it was designed
for the old stack).
Mostly fixes#812.
