* x86_64 is using the existing *_ia32 boot platforms.
* Special flags are required when compiling the loader to get GCC to compile
32-bit code. This adds a new set of rules for compiling boot code rather
than using the kernel rules, which compile using the necessary flags.
* Some x86_64 private headers have been stubbed by #include'ing the x86
versions. These will be replaced later.
* while it seemed to work before, BuildSetup was actually adding includes from the default boot platform, before BoardSetup had a chance of changing it.
are stored in signature-based subdirectories. This improves upon r37871 and
should allow BOM to properly harvest catkeys for online translation tools.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@38819 a95241bf-73f2-0310-859d-f6bbb57e9c96
* made locale build tools shut up about anything except warnings or errors
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@37723 a95241bf-73f2-0310-859d-f6bbb57e9c96
- consolidate board specific definitions into build/jam/board/*/BoardSetup to avoid duplicating address values everywhere,
- add various addresses, boot script, custom C/C++ flags and SD card definition,
- not sure BoardSetup is included at the best place though,
- replaced board-specific ldscript with passing the loader address directly to LD from BoardSetup,
- added haiku.mmc target which generates an mmc/SD card image with a FAT partition with the files needed to boot for the board, should later be integrated with haiku.image with the BFS partition offset passed to bfs_shell, requires apt:sfdisk,mtools on GNU/Linux,
- added some more rules, one to build a script for the SD image,
- fake a NetBSD loader for now, U-Boot doesn't know haiku, and we'll need a way to pass the tgz image and RAM size, we'll either use standlone way (usual C argv[]) or the NetBSD args,
- style fixes,
- 80 cols, /me pets Ingo.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@32284 a95241bf-73f2-0310-859d-f6bbb57e9c96
build/jam/OptionalPackageDependencies and include it earlier (before the
Jamfiles).
* Introduced build/jam/OptionalBuildFeatures which is supposed to do the setup
for optional build features that need it.
* Renamed USE_SSL to HAIKU_BUILD_FEATURE_SSL and made it more intelligent.
The OpenSSL optional package is downloaded and unzipped automatically when
enabled. Switching between enabled/disabled HAIKU_BUILD_FEATURE_SSL is
handled gracefully -- the concerned components are built in separate
subdirectories. Adding the OpenSSL optional package to the image also enables
HAIKU_BUILD_FEATURE_SSL.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@30021 a95241bf-73f2-0310-859d-f6bbb57e9c96
* Check the first argument for "help" as well. If given print a somewhat
helpful text. Consider this my excuse to close ticket #1883. :-)
* Track available and added optional packages and fail, if an optional package
is requested that doesn't exist. Closes ticket #3332.
* Check for duplicate build profile definitions and fail if encountered.
Closes ticket #3333.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@29298 a95241bf-73f2-0310-859d-f6bbb57e9c96
clean yet. Provides a haiku-cd target and creates a bootable image using mkisofs.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@29203 a95241bf-73f2-0310-859d-f6bbb57e9c96
generated). When not using build profiles this allows for separate configuration
per output directory. When using build profiles you could for example have a
different profile per output directory with the same name (so an @disk with
different settings per output dir for example).
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@29161 a95241bf-73f2-0310-859d-f6bbb57e9c96
UserBuildConfigRulePreImage, and UserBuildConfigRulePostImage which will be
invoked at different points in the build system execution. They can be
overridden in UserBuildConfig, thus allowing for executing user code at
those points.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@28765 a95241bf-73f2-0310-859d-f6bbb57e9c96
the wrong Link actions were used (always the no-attributes-support ones
which remove the target first), for instance.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@28304 a95241bf-73f2-0310-859d-f6bbb57e9c96
Especially people building various kinds of images with different
settings may want to have a look at the respective section in the
UserBuildConfig.ReadMe.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@24757 a95241bf-73f2-0310-859d-f6bbb57e9c96
HaikuImage and enabled individually using the
AddOptionalHaikuImagePackages rule or all at once by setting
HAIKU_ADD_ALL_OPTIONAL_PACKAGES. In principle an optional package can
be any kind of addition to the Haiku image, but usually a zip file will
be downloaded from somewhere and unzipped onto the image. I've added a
WonderBrush package as an example.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@22184 a95241bf-73f2-0310-859d-f6bbb57e9c96
relevant for the image creation.
* The CopySetHaikuRevision propagates the value of the
HAIKU_INCLUDE_IN_IMAGE variable from the source to the target.
* Propagate the value of HAIKU_INCLUDE_IN_IMAGE from "kernel" to
"kernel_$(TARGET_ARCH)".
Now "jam update-install kernel" should work as expected.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@21527 a95241bf-73f2-0310-859d-f6bbb57e9c96
operate manually on digit lists, so they are certainly not fast and shouldn't
be used excessively, but at least it's possible to do calculations in Jam now,
should the need arise.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@20596 a95241bf-73f2-0310-859d-f6bbb57e9c96
avoid all dependencies on libraries (that have been specified with
LinkSharedOSLibs or a rule that uses it).
This means you can now run a
NO_LIBRARY_DEPENDENCIES=1 jam MyApp
to build MyApp without updating any library MyApp depends on, even if they
have changed. This is a feature for people who know what they are doing to
speed up development.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@13483 a95241bf-73f2-0310-859d-f6bbb57e9c96
StaticLibraryFromObjects is a copy-paste of LibraryFromObjects without grist on source files
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@13199 a95241bf-73f2-0310-859d-f6bbb57e9c96
StaticLibrary now accepts static libraries to include (note that jam should be rebuilt)
LibraryFromObjects doesn't FGristFiles now, but Library does
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@13119 a95241bf-73f2-0310-859d-f6bbb57e9c96
- removed libnetapi.so from $NETWORK_LIBS - it's not used by anyone anyway,
and it's definitely not necessary to link against it by default.
Note, this might cause problems in some of the mail add-ons; I haven't
tested this.
- route/ping/... now also link against $SELECT_UNAME_ETC_LIB
makehdimage should now work again under all BeOS platforms.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@12325 a95241bf-73f2-0310-859d-f6bbb57e9c96
for building under Linux.
* Tried to get the header setup into a shape that would allow us to build
under Linux with gcc 3.x. But I give up for the moment. The C++ support
headers don't seem to be separate from the STL headers, which makes it
virtually impossible to use our STL together with gcc 3.x.
Worse, I don't even think, how we build under BeOS at the moment is
correct. The _G_config.h (glibc configuration) header is included from
some public headers, but is itself not made available. This causes the
R5 header to be used, which belongs to a completely different glibc
version. But when building our libroot we use the new header. I wouldn't
be surprised, if that could cause all kinds of subtle problems. Maybe
even the STL string problem I encountered recently.
git-svn-id: file:///srv/svn/repos/haiku/trunk/current@11607 a95241bf-73f2-0310-859d-f6bbb57e9c96
flags to be used. Defaults to -g. You might want to use -ggdb with
gcc 3.x.
* Added variable C++_SUPPORT_LIBS. Is set to sup++ for gcc 3.x.
* ResComp can be built under BeOS only at the moment.
* Define _NO_INLINE_ASM when building for the build platform. Is not
strictly necessary under BeOS, but helps under Linux.
git-svn-id: file:///srv/svn/repos/haiku/trunk/current@11561 a95241bf-73f2-0310-859d-f6bbb57e9c96
not just .o - newer GCC releases seem to have .oS objects in libgcc.a).
git-svn-id: file:///srv/svn/repos/haiku/trunk/current@11057 a95241bf-73f2-0310-859d-f6bbb57e9c96
That makes fine tuning any of them a nicer experience.
You have to rerun ./configure in order to build anything.
git-svn-id: file:///srv/svn/repos/haiku/trunk/current@11056 a95241bf-73f2-0310-859d-f6bbb57e9c96
DEBUG_PRINTF to be defined.
* Fixed KernelAddon rule: Now not the file but the target kernel.so is
specified for linking the add-on against, which results in proper
dependencies. Axel: Want to clarify the ToDo comment?
git-svn-id: file:///srv/svn/repos/haiku/trunk/current@10754 a95241bf-73f2-0310-859d-f6bbb57e9c96
Alex Smith