Double checked BeOS R5 & Haiku R1/A4 and BTextView should be 356
bytes, somewhere since then we've added 4 bytes. So, this commit
reduces the class size from 360 back to 356 by removing 1 reserved
int32 (instead of 2).
I believe the class size changed in hrev46798 as a result of adding
2 bools (1 byte each padded out to 4 bytes).
Sorry for the noise.
In hrev46796 I added two new private methods: _PreviousLineStart(),
and _NextLineEnd() which increased the size of the class breaking
binary compatability because I forgot to decrement the reserved array.
This commit decrements the reserved array restoring the class size
to the original size fixing the binary compat issue.
Thanks Axel for noticing.
The order is updated so the virtual methods appear in the same order
that they did in BeOS R5 with methods new to Haiku added to the bottom.
Perform() moves up, all other methods move below GetDragParameters(),
the last virtual method in BeOS R5's TextView.h.
* receiveEnd is set in a different place in case of chunked transfers,
which would cause the decompressor to never be flushed.
* In the case of chunked transfers, we call Flush() without any input
data (to flush only whatever is remaining in the decompression buffer).
This causes ZLib to return Z_BUF_ERROR which is translated to
B_BUFFER_OVERFLOW. This is a non-fatal error and is expected behavior in
that case. Don't handle this as an error, and do use the extracted data.
Fixes various cases of missing the last chunk of a page (pastie.org,
Google search results, and more).
Accidentally renamed these in the header, rename them back to
match the cpp file. These param names might not be very good but
they match the struct variable names. They are private methods
anyway. No functional change intended in either commit.
Besides that this is a nicer interface, it allows us to get a the HPKG
header as a side effect of initializing the reader, thus preventing
seeking backward in the file. This makes "package recompress - <file>"
work.
Until now we always declared in the HPKG header that the package file is
zlib compressed. For uncompressed files we would just store all
individual chunks uncompressed. Now we handle completely uncompressed
files slightly differently: We don't write the redundant chunk size
table anymore. The size savings are minor, but it makes the uncompressed
format read-streamable which may be handy.
* PackageFileHeap{Reader,Writer} as well as Package{Reader,Writer} and
their implementation and super classes do now internally use a
BPositionIO instead of a FD to access the package file. This provides
more flexibility needed for features to come.
* BPackageReader has already grown a new Init() version with a
BPositionIO* parameter.
Keep the brief description as a regular comment above each public method.
Leave the docs of private methods.
Some variable renaming mostly because of abbreviations.
Add documentation for all the public methods and app_info members and defines
that didn't have docs in the cpp file.
While enums are presented much more clearly in the docs and the values didn't
change this apparently caused some issues so we're going back to using #defines.
Also update the docs changing the \var tags to \def tag and putting the description
in a \brief tag.
No functional changes intended.
* Some variable renaming for clarity and consistency.
* Pointer style fixes.
* Added private method documentation back to cpp files for some methods.
Can be requested/stopped via BPackageRoster::{Start,Stop}Watching().
The notification message has the what code B_PACKAGE_UPDATE and contains
fields "event", "location", and "change count".
* BDaemonClient: Move inner class BCommitTransactionResult to top level
and make it public.
* BCommitTransactionResult:
- Add a whole bunch of specific error code enum values. Such an error
code is now the primary error, as opposed to before where we would
mix status_t and enum value errors. There's a systemError property
of type status_t which may provide additional information, though
(depending on the primary error type).
- Remove the errorMessage property. Due to mapping all errors to the
specific error codes this is no longer necessary. Mixing such a
message with another error description is also not very helpful when
it comes to localization (still not supported, though).
- Add several properties (paths, strings, error codes) that serve as
arguments to the primary error and are used by FullErrorMessage().
- Add issues property, a list of instances of new class
BTransactionIssue. Those describe non-critical issues (e.g. failed
update of a settings file) that occurred in the process of
committing the transaction. Those issues should be presented to the
user by the package management program.
* Exception: Adjust to transport the BCommitTransactionResult
properties.
* CommitTransactionHandler, FsTransactions, Root, Volume: Adjust to
BCommitTransactionResult/Exception changes.
* CommitTransactionHandler: Now requires a BCommitTransactionResult to
which it adds the issues it encounters. The reply BMessage is no
longer needed, though.
* Volume: Refactor common code from the three methods that use
CommitTransactionHandler into new method _CommitTransaction.
No functional change intended.
Focused on documented classes only.
* Update copyright information.
* whitespace fixes.
* pointer style
* Rename some variables, msg => message, form => what
* Need consistent variable names to make documentation easier,
allows us to use \copydoc or \copydetails instead of repeating
ourselves over and over again.
* The Network Kit now makes use of it for BUrlContext, so we need this
in the public headers.
* Problem caught by the new build bot by compiling the unit tests.
* Each BHttpAuthentication object is locked on all field accesses,
* They are owned by the BUrlContext and never deleted, so there is no
need for reference-counting them,
* The BUrlContext itself is now reference counted, and all BUrlRequests
hold a reference to it.
This makes sure using the BHttpAuthentication objects from requests is
thread-safe.
* Change the semantics of the iterators copy constructor and assignment
operator: they now return a new iterator for the same cookie jar (and
same url for the UrlIterator). They don't try to point to the same
position as the copied iterator. The only purpose of these is to write
code such as:
Iterator it = jar.GetIterator();
so having a full copy isn't that useful.
* The per-domain cookie lists are now protected with a read-write lock.
The iterators retain a read lock while they are handling cookies from
that list. They get a write lock when doing Remove. Adding a cookie to
the jar also gets the write lock for the matching list
* Fix a memory leak when adding a new domain-list to the jar failed
* Simplify the declaration of the PrivateHashMap type (it would be
even simpler if HashMap was a public API)
* The domain hashmap is now a SynchronizedHashMap. It is locked as long
as an Iterator or UrlIterator exists, which may be a problem as these
are public APIs. Writing safe iterators for an hashmap with concurrent
accesses is not easy, so the API could be modified to return a list of
domains and a list of cookies for a given domain or URL instead. This
would suit the intended uses just as well.
* The jar now store const cookies, so there is no need to lock them for
access/modification. Updating a cookie is done by replacing it with
another one in the jar (with the same domain and value). There is still
the problem of deleting a cookie while other threads may still access
it, this will be fixed by making cookies BReferenceable.
These were getting out of sync and causing trouble, and they are easy to
compute from existing information.
Fixes some problems detected by the testsuite where the user/password or
the host would sometime disappear from the URL.
No functional changes intended.
* Updated copyright information.
* Reduced doxygen documentation down to a helpful summary
in a regular comment, the documentation has been moved into
the Haiku Book.
* Some parameter renaming for consistency and clarity.
* A few other style fixes.
* A problem with our gcc requires adding casts for gcc4 when
the __builtin_bswap functions are used with a format string
* Unlike gcc2, the __builtin_bswap functions do not get disabled
despite using -fno-builtins, hence added compiler check in
runtime_loader/utility.cpp
* Introduced in gcc-4.3 for at least Intel platforms
* On ARM, full support added in gcc-4.8
* Other platforms untested, left as-is
* This introduces a breaking change to the ABI for gcc4
* Nothing ever reads fTargetName in the scrollbar code, so remove the
field.
* Frees one reserved slot, and a little memory, as the target name was
copied with strdup.
* The DataReceived hook gets a position argument, making it possible for
listeners to handle out-of-order data (from two range requests at
different positions, for example)
* Adjust HaikuDepot (only user of the API in our sources)
* Add a copy constructor to HTTPRequest that copies the relevant
parameters from an existing request. Makes it easy to repeat a request
with a different range. Could be useful for restarting downloads, or
paralellizing them.
* Add SetRangeStart, SetRangeEnd calls to HTTPRequest, no implementation
yet. I'm putting all the API changes in this commit as it needs to be
synced with a matching haikuwebkit release.
* All archs must update to HaikuWebkit 1.3.0. Previous versions are
broken by this.
Create and use BLayoutUtils::AlignOnRect() to position the button label
in BControlLook::DrawLabel().
AlignOnRect(), unlike AlignInFrame(), provides the possibility to return
a rectangle with dimensions greater than the available size.
Add some comments above the methods in LayoutUtils that indicate such.
Also update copyright headers in LayoutUtils and ControlLook
* BView gets SetFillRule/FillRule methods. The fill rule is part of the
view state.
* The B_NONZERO rule is the default. This is what we implemented before.
* The B_EVEN_ODD rule is the other common possibility for this, and
we need to support it to help WebKit to render properly.
* BSecureSocket::CertificateVerificationFailed() took a BCertificate
instance by value as parameter.
BCertificate deletes internal data in its destructor. Passing an
object by value creates a copy, so the copy attempted to delete
the internal data again during its destruction.
This caused mail_daemon to crash here when it came across a failed
certificate.
* Fix: pass BCertificate object as reference.
* This will be used to implement compressed http streams
* Remove the custom BDataOutput class, and use BDataIO instead, for
easier integration with existing code.
inline const floats are a gcc extension. It is possible to do it in a
standard way in C++11 using constexpr, but then gcc will reject the
previously accepted nonstandard syntax.
Everything untested, but compiles, so it must work. The idea is to introduce
BAffineTransform additionally to the existing Origin and Scale properties of
BViews. One may use it in parallel or as an alternative. Painter in app_server
is not yet aware of the additional transformation. It is however already used
to transform drawing coordinates. It probably needs to work differently,
perhaps only in Painter and AGGTextRenderer.
Make Cmd+Left and Cmd+Right work the same as Option+Left and
Option+Right, that is, they do word-wise navigation.
Make Option+Up go to beginning of paragraph and Option+Down go to end
of paragraph like Cmd+Left and Cmd+Right used to.
Unfortunately option shortcuts are currently eaten by S&T until #9431
gets fixed.
* Command+Left goes to beginning of line, ignoring softwrap
* Command+Right goes to the end of line, ignoring softwrap
* Home goes to beginning of line, accounting for softwrap
* End goes to end of line, accounting for softwrap
* Option+Left goes to previous word
* Option+Right goes to next word
* Command+Home and Command+Up go to beginning of document
* Command+End and Command+Down go to end of document
Shift with any of the above also selects the text.
This is similar to how the text editor Eddie works.
Add SetSupportedTypes() and SetIcon[ForType]() versions with an
additional bool updateMimeDB parameter. If false, the method doesn't
update the MIME DB entries for the type.
* BSolver/LibsolvSolver: Add FullSync() method. It uses libsolv's
SOLVER_DISTUPGRADE mode.
* BPackageManager: Add FullSync() using the new solver mode.
* pkgman: Add full-sync command.
The new command is similar to the update command without arguments, just
more aggressive, allowing downgrading or even removal of packages, to
match the state of the repositories. Just like "update" it doesn't work
properly yet.
* Fix incorrect cpu vendor name mapping
* Add additional CPU architectures
* Add additional CPU vendors
* Rework PowerPC arch_system_info passing
PVR back for cpu model
* Instead of creating an OpenSSL context ofor each socket, use a global
one and initialize it lazily when the first SecureSocket is created
* Load the certificates from our certificate list so SSL certificates
sent by servers can be validated.
* Add a callback for signalling that certificate validation failed, the
default implementation proceeds with the connection anyway (to keep the
old behavior).
* Introduce BCertificate class, that provides some information about a
certificate. Currently it's only used by the callback mentionned above,
but it will be possible to get the leaf certificate for the connection
after it's established.
Review of the API and implementation is welcome, before I start making
use of this in HttpRequest and WebKit to allow the user to accept new
certificates.
Use standard error codes instead.
This allows using error code returned by the underlying functions
directly, and makes it possible to use strerror for debugging. So, we
can also remove StatusString() from the various *Request classes.
* Previously PE binaries would trigger the "incorrectly
executable" dialog. Now we get a special message for
B_LEGACY_EXECUTABLE and B_UNKNOWN_EXECUTABLE
* Legacy at the moment is a R3 x86 PE binary. This could
be extended to gcc2 binaries someday far, far, down the
road though
* The check for legacy is based on a PE flag I see
set on every R3 binary (that isn't set on dos ones)
* Unknown is something we know *is* an executable, but
can't do anything with (such as an MSDOS or Windows
application)
* No performance drops as we do the PE scan last
* Tested on x86 and x86_gcc2
This field forces kernel to track each CPU load all the time. It is not
a problem with the current scheduler on a multicore systems, but on
single core machnies or with any other future scheduler this field may
become just an unnecessary burden. It isn't difficult for an application
to compute CPU load by itself when it needs it.
When calling Stop(), we expect the request thread to exit as soon as
possible. Closing the connection unlocks it from any blocking read() or
write(), avoiding some lockup situations.
* My BeagleBone gcc defines __ARMEL__ but not
__ARM__ which breaks the native tool builds
* As ARM was originally Little Endian, we assume
__ARM__ means as such.
* Look for Big Endian ARM and define the needed big
endian preprocessors
* Add behavior constant B_POP_UP_BEHAVIOR which adds a pop-up marker
to the button (similar to that of BMenuField).
* Add methods [Set]PopUpMessage(). To set/get the the message that is
sent to the button's target when the pop-up marker is clicked.
* Add methods SetFlat()/IsFlat(). A flat button doesn't draw its frame,
unless the mouse is hovering over it or it is otherwise activated.
* As a side effect this change also activates the hover glow that was
already implemented in BControlLook, but not activated in BButton.
* Draw(): Remove the non-BControlLook code.
* GetPreferredSize(): Implement based on _ValidatePreferredSize() to
avoid code duplication.
* Draw(): Fix off-by-one error. The label was too close to the box.
* Draw(), _ValidatePreferredSize(): Add icon support.
_ValidatePreferredSize() is now actually aligned with what Draw()
expects. The preferred width is now a tight fit; there were three or
four pixels of empty space before.
Due to the fixed check box position the layout isn't that nice in
some situations (particularly with an icon larger than the text),
IMHO.
The icon is meant as an addition to or replacement of the label. Icon
bitmaps for various states of the control (off, on, partially on, each
enabled or disabled, plus up to 125 custom states) can be set
individually via SetIconBitmap() (getter IconBitmap()).
The convenience method SetIcon() can be used to set the bitmaps for the
standard states from a single bitmap; it also supports cropping the
icon to its non-transparent area. Code borrowed from BIconButton.
* Update the previously unused frame_type and background_type enums.
* Add methods GetFrameInsets(), GetBackgroundInsets(), GetInsets() to
get the insets for a given frame type, background type, or both
respectively.
* Add possible control state B_CONTROL_PARTIALLY_ON and support it in
BCheckBox and BControlLook.
* BCheckBox: Add partialStateToOff property defining whether the
partial state should transition to off. Defaults to false (i.e.
partial to on).
* This is primarily a service method for ports of widget tool kits
that require single-threaded GUI. DispatchExternalMessage() calls
DispatchMessage(), but also sets fLastMessage, so that
[Detach]CurrentMessage() work correctly. This allows to detach a
message in DispatchMessage() when called from the window thread,
add it to a global queue, and later process the queued messages in
a different thread that calls DispatchExternalMessage().
* BLooper/BWindow: Make sure fLastMessage is accessed only when locked.
* BUrlResult is back, with ContentType and Length methods.
* BHttpResult subclasses it and use HTTP header fields to implement
those
* Introduce BDataRequest for "data" URIs. These embed the data inside
the URI, either as plaintext or base64 encoded.
We can send the data directly to the output socket instead of copying it
into a BString first, at the cost of very slightly less information in
debug output.
* Create new interface for cpuidle modules (similar to the cpufreq
interface)
* Generic cpuidle module is no longer needed
* Fix and update Intel C-State module
When using the copy constructor of BNetEndpoint the socket of the
original endpoint gets dup'ed. The Accept() method later directly reset
the fSocket member of the newly created BNetEndpoint to the socket
returned by accept(). The socket dup'ed by the copy constructor was
therefore leaked.
Of course dup'ing the socket and copying the local and remote addresses
is superfluous in the accept case, as these members all get set to new
values. To reduce that overhead there is now a new private constructor
that directly gets the final socket and remote and local address.
Add a constructor and a SetTo() method with a
BPackageResolvableExpression parameter instead of a path. The path of
the package satisfying the expression is used.
The new functionality lives in libpackage as it uses the package kit.
* get_architectures() returns the primary and the secondary
architectures in one array. That turned out to be convenient.
* Add C++ versions for get[_secondary]_architectures(), returning a
BStringList.
* Add get_architecture(), get_primary_architecture(),
get_secondary_architectures(), guess_architecture_for_path() to get
the caller's architecture, the primary architecture, all secondary
architectures, or the architecture associated with a specified path
respectively.
* Rename the find_path*() functions to find_path*_etc() and add an
optional architecture parameter. Add simplified find_path*()
functions.
* BPathFinder: Add FindPath[s]() versions with an architecture
parameter.
Implement BNetworkRoster::GetRoutes() and BNetworkInterface::GetRoutes().
Also implement BNetworkInterface::GetDefaultGateway().
There is code duplication at the moment, and the api only supports IPV4.
* Remove useless dummy protocol loop in UrlRequest
* Stop HTTP requests before deleting the socket and other things the
loop may still be using
* Deletion of items from the authentication map wasn't working
* Remove some debug traces
* virtio_scsi can have 16384 luns, though we cap at 256 as our scsi_ccb
only uses uchar as a type for target_lun and target_id members.
* minor code cleanup in scsi_scan_bus().
* The UNMAP command is theoretically much faster, as it can get many block
ranges instead of just a single range.
* Furthermore, the ATA TRIM command resembles it much better.
* Therefore, fs_trim_data now gets an array of ranges, and we use SCSI UNMAP
to trim.
* Updated BFS code to collect array ranges to fully support the new
fs_trim_data possibilities.
No functional change intended.
Renamed title => name in regular constructors,
No right or wrong here but consistant now.
Renamed data => archive in Achive constructor,
Ditto.
* No need for the atomically changed variables to be declared as
volatile.
* Drop support for atomically getting and setting unaligned data.
* Introduce atomic_get_and_set[64]() which works the same as
atomic_set[64]() used to. atomic_set[64]() does not return the
previous value anymore.
The new functions are meant to replace many uses of find_directory():
* find_paths() is supposed to be used when the directories of a certain
kind in all installation directories are needed (e.g. font
directories, add-on directory, etc.). Using this API makes code
robust wrt addition or removal of installation locations.
* find_path() is supposed to be used when files/directories associated
with a loaded program, library, or add-on need to be found (e.g. data
files or global settings).
* find_path_for_path() is similar to find_path(), but it starts from a
given path instead of an image.
The authentication state is stored (in a hash map, using the domain+path
as a key) in the UrlContext class. It can then be reused for multiple
requests to the same place. We also lookup stored authentications for
parent directories and stop at the first we find.
Authentication state is not stored on disk (unlike cookies), and there
can only be one for each domain+path.
This change is needed for implementing cookie persistence in Web+ using
the network kit backend.
The current implementation requires the user to unarchive the cookie
jar, then hand it over to the BUrlContext which will copy it to its own
field. This makes the code simpler, but maybe doing a complete copy
(with all the cookies) is an heavy operation and could be avoided.
* BWindow used to generate the B_MOUSE_IDLE events by sending a
delayed message with a one-shot BMessageRunner to itself.
Every creation and deletion of BMessageRunners causes synchronous
messaging between the application under the mouse cursor and the
registrar. This creates large amounts of calls to set_port_owner()
in the kernel whenever moving the mouse.
* Now, B_MOUSE_IDLE is sent by the cursor loop inside the app_server
instead. When the mouse wasn't moved for the tooltip delay time,
it inserts a B_MOUSE_IDLE message into the event stream.
* The tooltip delay thus becomes a system-wide constant and is not
configurable per-application anymore (no code currently in the
Haiku repo makes use of that anyhow).
* Remove the fRawData field, as handling it is too complicated (it's
not easy to have proper copy semantics on a BDataIO) and it's not used
anyway, as the listener DataReceived call is enough to get the data and
handle it.
* All the remaining fields are HTTP-only, so rename the class to
HttpResult and attach it to HttpRequest instead of UrlRequest.
CID 1108353, 1108335: memory leak.
CID 610473: unused variable.
CID 1108446, 1108433, 1108432, 1108419, 1108400, 991710, 991713, 991712,
610098, 610097, 610096, 610095: uninitialized field
CID 1108421: unused field
Change the ownership of the result for Url/HttpRequests. The request now
owns its result and you either access it by reference while the request
is live, or copy it to keep it after the request destruction. To help
with that, get BUrlResult copy constructor and assignment operator to
work.
Performance issue: copying the BUrlResult also copies the underlying
BMallocIO data. This should be shared between the BUrlResult objects to
make the copy lighter. The case of BUrlSynchronousRequest is now
particularly inefficient, with at least 2 copies needed to get at the
result.
* Now takes ownership of headers, form data and input data
* Split Set* and Adopt* methods to help with proper use of this (Set
does a copy)
* Write documentation.
* The RFC provide a regular expression for URI parsing, so just use it.
* Allows parsing URIs with missing components (no scheme or authority)
* This allows to parse relative URLs as expected
* Can also handle things such as data: or mailto:
* Also more fixes to handling of incomplete URIs, some flags weren't
always set to the right values.
This gets Windows Live Mail (or is it called Outlook?) working, with
some other fixes on WebKit side.
* With so long class names, there's no way I'm going to follow the 64
char limit on commit headlines.
* The class share the same API, so having them separate is not very
useful.
* This makes it possible to use the same listener in either synchronous
or asycnhronous mode (or both, for different requests)
* Add some error handling in NetworkCookie and don't add broken cookies
(or should I say crumbs?) to the cookie jar
* More control on the path and domain, as well as the expiration time
We now pass Opera cookie testsuite functionality tests, as well as some
of the negative tests (we even do better than curl). Not going further
right now as this works well enough for positive cases and most
security/privacy issues are fixed (cross domain and cross path cookie
setting or spying).
* They used an unsigned int, which led to overflows when trying to set
them to a time before January 1st, 1970 (local time)
* Some things use January 1st, 1970, GMT (or UTC) as a reference point.
In my timezone this leads to such a negative date. An example is cookie
expiration dates which are set to this date to expire them immediately.
Spotted by Opera testsuite.
* This makes the method unuseable for dates after 2036 (signed 32-bit
time_t will overflow then. This gives us just 33 years to switch to a
64-bit time_t. In te meantime, please try using other methods to set the
date and time for BDateTime objects if you need to go this far.
* This takes a relative path as a parameter, and modifies the object to
point to the given location.
* '..' is not handled yet, and will be sent as-is to the server.
* Makes it possible to follow more types of 302 redirects
In particular, I can now run the tests from Opera's testsuite
(testsuite.opera.com), which shows I have more work to do on cookie
handling.
* Some fields weren't initialized, leading to random crashes later on
* Remove the enum that was used for protocol options
* Use a single field to track the request state, instead of separate
booleans.
* The cookie jar iterator now use a BObjectList instead of a BList
* Add a convenience method to the cookie jar to add a cookie by BUrl
and raw cookie string.
* Remove some methods in BNetworkCookie that could lead to invalid
cookies (cross-domain or with no domain at all).
* Make the cookie parsing able to report errors
* Fix off-by-one error in domain cookies validation.
...while mouse is down on a menufield
This makes it so that you can't open 2 menufields simultaneously
by clicking and holding the right mouse button on one menufield while
clicking a second with the the left mouse button opening it.
This matches the behavior on BeOS R5.
Should help with #6408 comment:9
* Remove the BUrlRequest class, which was only delegating work to
BUrlProtocol and subclasses
* Rename BUrlProtocol to BUrlRequest, and BUrlRequestHttp to BHttpRequest
* Creating a request is now done through the BUrlProtocolRoster. For
now there is just a static MakeRequest method, this will be completed
when we get to actually allowing add-ons to provide different request
handlers.
This allows cleanup of the API for requests:
* Remove the universal SetOption method with constants, and have
dedicated setters for each protocol option.
* Setters can now have multiple parameters, for example you can give
BHTTPRequest a BDataIO and a known size
* In this case, the BHttpRequest will not use HTTP chunked transfers,
which were always used before and made most servers unhappy (tested and
failed with lighttpd, google accounts and github).
* This does intentionally break source compatibility, so that a review
of concerned code is forced.
* Binary compatibility should be maintained in most cases. The values
of the constants for the writable directories are now used for the
writable system directories. The values for the non-writable
directories are mapped to "/boot/system/data/empty/...", an empty or
non-existent directory, so that they will simply be skipped in search
paths. Only code that explicitly expects to find something in a
B_COMMON_* directory, will fail.
* Remove support for the "common" installation location from packagefs,
package kit, package daemon, package managers.
* Rename the B_COMMON_*_DIRECTORY constants referring to writable
directories to B_SYSTEM_*_DIRECTORY.
* Remove/adjust the use of various B_COMMON_*_DIRECTORY constants.
I'm sure some occurrence still remain. They can be adjusted when the
remaining B_COMMON_*_DIRECTORY constants are removed.
- BJobStateListener: Add progress state and corresponding hook.
- FetchFileJob: Notify job progress hook on libcurl notifications.
- UserInteractionHandler: Add hooks for download progress and checksum
validation progress.
- PackageManager: inherit from JobStateListener and watch for job
notifications for internally generated jobs. Forward to corresponding
UserInteractionHandler hooks as needed.
- Adapt pkgman, HaikuDepot and package_daemon to above changes.
Neither HaikuDepot nor package_daemon's progress hooks are wired up to
do anything yet though.
- A subset of jobs that require a BContext don't in fact make use of the
decision provider. As such, make the default implementation usable for
those cases so one doesn't need to always create a dummy derived class.
