* Fixes problems with setting the partition name after uninitializing
a partition in DriveSetup. Previously, UninitializeJob() was
followed by SetStringJob(), but the kernel was updating the
change counter for the parent partition when uninitializing a
partition, leading to SetStringJob() having an incorrect change
counter for the parent partition. Now the parent change counter
will be correct when SetStringJob() runs.
* Add function core_dump_write_core_file(). It writes a core file for
the current thread's team. The file format is similar to that of
other OSs (i.e. ELF with PT_LOAD segments and a PT_NOTE segment), but
most of the notes are Haiku specific (infos for team, areas, images,
threads). More data will probably need to be added.
* Add team flag TEAM_FLAG_DUMP_CORE, thread flag
THREAD_FLAGS_TRAP_FOR_CORE_DUMP, and Team property coreDumpCondition,
a condition variable available while a core dump is progress. A
thread that finds its flag THREAD_FLAGS_TRAP_FOR_CORE_DUMP set before
exiting the kernel to userland calls core_dump_trap_thread(), which
blocks on the condition variable until the core dump has finished. We
need the team's threads to stop so we can get their CPU state (and
have a generally unchanging team state while writing the core file).
* Add user debugger message B_DEBUG_WRITE_CORE_FILE. It causes
core_dump_write_core_file() to be called for the team.
* Dumping core as an immediate effect of a terminal signal has not been
implemented yet, but that should be fairly straight forward.
Reduce duplication of code by
* Removing from elf_common.h definitions available in os/kernel/elf.h
* Deleting elf32.h and elf64.h
* Renaming elf_common.h to elf_private.h
* Updating source to build using public and private ELF header files
together
Signed-off-by: Jessica Hamilton <jessica.l.hamilton@gmail.com>
The use of an unreliable test for relocatability effectively broke
runtime_loader's support for non-position-independent executables, as it
would insist on randomly positioning these files' segments in memory
anyway causing the program to quickly crash.
With this change runtime_loader uses the object type specified in the
file's header to determine whether its segments can be safely relocated,
restoring support for non-PI executables.
Fixes#12427.
Signed-off-by: Adrien Destugues <pulkomandy@pulkomandy.tk>
* Instead of letting the kernel search for the syslog port, the
daemon now registers itself with the kernel (which even solves
a TODO).
* A port is created for the actual log messages from the launch_daemon,
and used on start.
* However, the SyslogTest does not yet work, due to the BMessage <->
KMessage communication problems.
* Fixes sharing semantics, so non-shared semaphores in non-shared
memory do not become shared after a fork.
* Adds two new system calls: _user_mutex_sem_acquire/release(),
which reuse the user_mutex address-hashed wait mechanism.
* Named semaphores continue to use traditional sem_id semaphores.
The get_stack_trace syscall generates a stack trace using the kernel
debugging facilities and copies the resulting return address array to
the preallocated buffer from userland. It is only possible to get a
stack trace of the current thread.
The lookup_symbol syscall can be used to look up the symbol and image
name corresponding to an address. It can be used to resolve symbols
from a stack trace generated by the get_stack_trace syscall. Only
symbols of the current team can be looked up. Note that this uses
the symbol lookup of the kernel debugger which does not support lookup
of all symbols (static functions are missing for example).
This is meant to be used in situations where more elaborate stack trace
generation, like done in the userland debugging helpers, is not possible
due to constraints.
There is absolutely no reason for these functions to be in commpage,
they don't do anything that involves the kernel in any way.
Additionaly, this patch rewrites memset and memcpy to C++, current
implementation is quite simple (though it may perform surprisingly
well when dealing with large buffers on cpus with ermsb). Better
versions are coming soon.
Signed-off-by: Paweł Dziepak <pdziepak@quarnos.org>
* The new libstdc++.so contains program headers of type PT_RELRO (for
making segments read-only after relocation). While the actual feature
has not been implemented, the runtime_loader should now silently
accept (and ignore) those program headers.
This patch introduces support of ELF based TLS handling with lazy allocation
and initalization of TLS block for each DSO and thread. The implementation
generally follows the official ABI except that generation counter in dtv
is in fact a pointer to Generation object that contains both generation
counter and size of the dtv. That simplified the implementation a bit, but
could be changed later. The ABI requirements regariding in memory position
of TLS block is not honoured what results in static TLS model being
unsupported. However, that should not be a problem as long as
"executables" in Haiku are in fact shared objects and optimizations which
require specific TLS block in memory layout are not possible anyway.
... in filenames. Replace the existing Unicode conversion functions
with UTF conversion functions from js that he relicensed MIT for us.
Put the UTF conversion functions in a private but shared code location
so that they can be accessed throughout the kernel.
Right now we only provide functions to convert between UTF-8 and UTF-16.
At some point we should also add functions to convert between UTF-8 and
UTF-32 and UTF-16 and UTF-32 but these aren't needed by exfat.
Remove the old Unicode conversion functions from exfat as they assumed
UCS-2 characters and don't work with UTF-16 used by exfat.
Rename most variables with the term length with code unit where code units
are intended. The term length, when used, means length in bytes while code
units represent either a full 2-byte UTF-16 character or half a 4-byte
surrogate pair.
* Previously PE binaries would trigger the "incorrectly
executable" dialog. Now we get a special message for
B_LEGACY_EXECUTABLE and B_UNKNOWN_EXECUTABLE
* Legacy at the moment is a R3 x86 PE binary. This could
be extended to gcc2 binaries someday far, far, down the
road though
* The check for legacy is based on a PE flag I see
set on every R3 binary (that isn't set on dos ones)
* Unknown is something we know *is* an executable, but
can't do anything with (such as an MSDOS or Windows
application)
* No performance drops as we do the PE scan last
* Tested on x86 and x86_gcc2
* Increase FIFO buffer capacity from 32 to 64 KiB and the FIFO atomic
write size ({BUF_SIZE}) from 512 bytes to 4 KiB (both like Linux).
* Fix *pathconf(..., _PC_PIPE_BUF). It was returning 4 KiB although the
implemented atomic write size was 512 bytes only. Now both *pathconf()
and the FIFO implementation refer to the same constant.
In each installation location, it is now possible to create a settings
file "packages" that allows to blacklist entries contained in packages.
The format is:
Package <package name> {
EntryBlacklist {
<entry path>
...
}
}
...
<package name> is the base name (no version) of the respective package
(e.g. "haiku"), <entry path> is an installation location relative path
(e.g. "add-ons/Translators/FooTranslator").
Blacklisted entries will be ignored by packagefs, i.e. they won't appear
in the file system. This addresses the issue that it may be necessary to
remove a problematic file (e.g. driver, add-on, or library), which would
otherwise require editing the containing package file.
The settings file is not not "live". Changes take effect only after
reboot (respectively when remounting the concerned packagefs volume).
* get_architectures() returns the primary and the secondary
architectures in one array. That turned out to be convenient.
* Add C++ versions for get[_secondary]_architectures(), returning a
BStringList.
* Add get_architecture(), get_primary_architecture(),
get_secondary_architectures(), guess_architecture_for_path() to get
the caller's architecture, the primary architecture, all secondary
architectures, or the architecture associated with a specified path
respectively.
* Rename the find_path*() functions to find_path*_etc() and add an
optional architecture parameter. Add simplified find_path*()
functions.
* BPathFinder: Add FindPath[s]() versions with an architecture
parameter.
The new functions are meant to replace many uses of find_directory():
* find_paths() is supposed to be used when the directories of a certain
kind in all installation directories are needed (e.g. font
directories, add-on directory, etc.). Using this API makes code
robust wrt addition or removal of installation locations.
* find_path() is supposed to be used when files/directories associated
with a loaded program, library, or add-on need to be found (e.g. data
files or global settings).
* find_path_for_path() is similar to find_path(), but it starts from a
given path instead of an image.
Should already have been done back when the semantics for the
B_COMMON_*DIRECTORY constants was changed.
Currently old and new version behave the same. So this is just a
contingency measure ATM.
* This does intentionally break source compatibility, so that a review
of concerned code is forced.
* Binary compatibility should be maintained in most cases. The values
of the constants for the writable directories are now used for the
writable system directories. The values for the non-writable
directories are mapped to "/boot/system/data/empty/...", an empty or
non-existent directory, so that they will simply be skipped in search
paths. Only code that explicitly expects to find something in a
B_COMMON_* directory, will fail.
* find_directory() and hard-coded paths use /boot/system instead of
/boot/common.
* The build system creates the writable directories in /boot/system
instead of /boot/common.
* The build system no longer installs any packages in /boot/common.
Support for 64-bit atomic operations for ARMv7+ is currently stubbed
out in libroot, but our current targets do not use it anyway.
We now select atomics-as-syscalls automatically based on the ARM
architecture we're building for. The intent is to do away with
most of the board specifics (at the very least on the kernel side)
and just specify the lowest ARMvX version you want to build for.
This will give flexibility in being able to distribute a single
image for a wide range of devices, and building a tuned system
for one specific core type.
As korli suggested use B_PAGE_SIZE for defining stack size related
definitions what seems to be more natural for them and also may
help if we ever support an architecture with page size different than
4kB.
As korli suggested use B_PAGE_SIZE for defining stack size related
definitions what seems to be more natural for them and also may
help if we ever support an architecture with page size different than
4kB.
* Mostly useful for virtualization at the moment. Works in QEmu.
* Can be enabled by safemode settings/menu.
* Please note that x2APIC normally requires use of VT-d interrupt remapping feature
on real hardware, which we don't support yet.
* If at least one image is either B_HAIKU_ABI_GCC_2_ANCIENT or
B_HAIKU_ABI_GCC_2_BEOS almost all areas are marked as executable.
* B_EXECUTE_AREA and B_STACK_AREA are made public. The former is enforced since
the introduction of DEP and apps need it to correctly set area protection.
The latter is currently needed only to recognize stack areas and fix their
protection in compatibility mode, but may also be useful if an app wants
to use sigaltstack from POSIX API.
This patch introduces randomization of commpage position. From now on commpage
table contains offsets from begining to of the commpage to the particular
commpage entry. Similary addresses of symbols in ELF memory image "commpage"
are just offsets from the begining of the commpage.
This patch also updates KDL so that commpage entries are recognized and shown
correctly in stack trace. An update of Debugger is yet to be done.
