implemented system_beep() by sending an event to the media addon server
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@20728 a95241bf-73f2-0310-859d-f6bbb57e9c96
- TCP now behaves correctly when receiving new connections as its SYN/ACK is queued, or if lost correctly retransmitted when the peer resends a SYN.
- The first ICMP Replies from an external on-link host pinging Haiku are no longer lost.
- Reduced the number of ARP messages Haiku needs to generate until resolving an entry.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@20712 a95241bf-73f2-0310-859d-f6bbb57e9c96
part of the view, you can add a BRect "be:area" to that message - very handy.
* Cleaned up AppDefs.h a bit.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@20683 a95241bf-73f2-0310-859d-f6bbb57e9c96
- check if the destination address is specified in IPv4's SendData()
- minor cleanups to IPv4's TRACE()s.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@20681 a95241bf-73f2-0310-859d-f6bbb57e9c96
- made the ipv4 raw, udp and link protocols use DatagramSocket.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@20672 a95241bf-73f2-0310-859d-f6bbb57e9c96
- IPv4 now assumes the addresses it is supplied in send_routed_data are already the appropriate ones.
- made the Data(), operator* and operator-> methods in NetBufferFieldReader const so we can use them in the same expression as the constructor.
- fixed an issue with UDP where the wrong source address could be used in the calculating the checksum.
- changed ipv4_print_address to use the more common 0.0.0.0 format.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@20660 a95241bf-73f2-0310-859d-f6bbb57e9c96
- introduced base NetBufferFieldReader which deals with obtaining a continuguous field to deal with.
- renamed Detach() to Sync() to better express the fact that we may be writing to the buffer.
- Fixed IPv4's and ICMP's checksum calculation as it assumed the underlying header was contiguous.
- ICMP is now able to reply to ICMP Echo Requests which were split across data nodes.
- in split_buffer(), make sure we were able to trim() the new buffer before damaging the original one.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@20657 a95241bf-73f2-0310-859d-f6bbb57e9c96
- Properly flag sockets using non-blocking connects() when in SYN SENT.
- and when in LISTEN, we should use the socket's connection queue size.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@20631 a95241bf-73f2-0310-859d-f6bbb57e9c96
- Introduced public net_device_monitor.
- Changed the link protocol to maintain a lock per instance instead of inside the FIFO. Now all of the link instance data is protected.
- Adapted the link protocol to use net_device_monitor.
- Introduced a private Fifo class which doesn't maintain it's own lock.
- Maybe we should add something like a public net_protocol_implementation which maintains a fifo and a benaphore? With the fifo using the structure's lock instead of maintaining it's own.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@20614 a95241bf-73f2-0310-859d-f6bbb57e9c96
- changed the link, ipv4 and udp modules to use fifo_socket_enqueue_buffer
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@20587 a95241bf-73f2-0310-859d-f6bbb57e9c96
- changed the socket module to use thew new RECEIVE/SEND in all forms of recv() and send()
- changed libnetwork to use the new RECEIVE/SEND
- remove transfer_args processing from strace since the structure was removed
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@20581 a95241bf-73f2-0310-859d-f6bbb57e9c96
* use em_media_status to get link status
* added IFM_1000_SX (Fiber Optic) to net/if_media.h
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@20551 a95241bf-73f2-0310-859d-f6bbb57e9c96
* The device interface list now uses class DoublyLinkedList instead of struct list.
* Implemented SIOC[SG]IFMEDIA for setting (not supported by any device yet), and
retrieving the device media information.
* Fixed a locking bug in list_domain_interfaces().
* Added new stack function device_link_changed() that should be called in case the
link state (media) changed.
* The ethernet device module now spawns a thread and will periodically check the media
state of all ethernet devices that support this (if any).
* Minor cleanup.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@20546 a95241bf-73f2-0310-859d-f6bbb57e9c96
it might also be a good idea to change the constants to better match the usual
style.
* Added a BSD-style if_media.h.
* Added interface flags IFF_LINK, IFF_AUTO_CONFIGURED, and IFF_CONFIGURING. The
former will be set automatically by the stack, the rest will be set by the
net_server depending on the current state.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@20535 a95241bf-73f2-0310-859d-f6bbb57e9c96
rewind_query() -- are passed to the userland. get_vnode_name() has an
emulation in userland, in case the client FS doesn't implement it.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@20522 a95241bf-73f2-0310-859d-f6bbb57e9c96
in.
* New debugger command "find_page", which searches all page queues to
find out, which one a page is actually in.
* Solved nasty race condition between the page scrubber and
vm_page_allocate_page_run(): The page scrubber didn't mark the pages
it was processing busy, so that vm_page_allocate_page_run() could claim
them in the meantime. They would end up in the clear pages queue,
although being assigned to a cache at the same time. This should
finally solve bug #1056.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@20474 a95241bf-73f2-0310-859d-f6bbb57e9c96
again for target libbe_test. Added respective syscall stubs and other functions
to libhaikucompat.a.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@20447 a95241bf-73f2-0310-859d-f6bbb57e9c96
into its own shared/AutoLocker.h. It can be used by userland code too.
* Removed headers/private/shared/ObjectLocker.h and replaced all uses of
BObjectLocker by AutoLocker.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@20432 a95241bf-73f2-0310-859d-f6bbb57e9c96
* Added a comment to vm_remove_all_page_mappings() that shows that we need to
change the mapping spinlock into a mutex.
* Pointed out some potential problems in the code.
* Added vm_page_at_index(), vm_clear_map_activation(), and vm_test_map_activation()
in preparation of the page scanner rewrite.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@20407 a95241bf-73f2-0310-859d-f6bbb57e9c96
possibility to initialize the AutoLocker without locking the object even
if it is unlocked yet. Especially in loops Lock()/Unlock() come handy
when an otherwise constantly hold lock needs to be unlocked for a short
time.
I suppose we should move the kernel utils AutoLocker implementation
to headers/private/shared, and drop the less powerful ObjectLocker.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@20405 a95241bf-73f2-0310-859d-f6bbb57e9c96
see the "ARP entry updated with different address" message.
* sockaddr_dl::sdl_data is now unsigned (uint8_t instead of char).
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@20399 a95241bf-73f2-0310-859d-f6bbb57e9c96
{set,clear}_debugger_{break,watch}point(), allowing to set/clear break
and watchpoints for the calling team. When a break/watchpoint is hit,
the team enters the debugger. Handy in situations when the program in
question can't really be started in a debugger (or it would be
complicated to do so). The functions work only as long as no debugger is
installed for the team.
We clear the arch specific team and thread debug infos now, when a new
debugger is installed, thus clearing break- and watchpoints.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@20396 a95241bf-73f2-0310-859d-f6bbb57e9c96
with gcc 4. Fixed resulting build errors (gcc is more lenient for
headers in -isystem directories).
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@20386 a95241bf-73f2-0310-859d-f6bbb57e9c96
for the kernel. Added missing includes in userland code that uses the
header.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@20366 a95241bf-73f2-0310-859d-f6bbb57e9c96
suggested by Ingo; before it would just fill the physical pages with NULL pointers.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@20364 a95241bf-73f2-0310-859d-f6bbb57e9c96
that points to both, the page and the area the page is in. This will allow a page
scanner to steal unused pages when necessary.
* The locking is currently done with a spinlock which we might want to have another
look at one day.
* dump_page() and dump_area_struct() now dump the page mappings as well.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@20356 a95241bf-73f2-0310-859d-f6bbb57e9c96
* Use AGP Bus manager module
* Fixed wrong framebuffer address computation; this should fix bug #1079.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@20336 a95241bf-73f2-0310-859d-f6bbb57e9c96
can be emulated -- and pass this info to the kernel add-on. Thus we can
avoid passing requests to the userland that can't be serviced anyway.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@20331 a95241bf-73f2-0310-859d-f6bbb57e9c96
add-ons accordingly and removed the syscall.
* Removed send_notification().
* Reimplemented notify_listener(). It used the unimplemented
send_notification(). Now it has a chance to work. Note that
notify_listener() is obsolete. I would already have removed it, if
there weren't lots of FS implementations still using it (Hint!).
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@20329 a95241bf-73f2-0310-859d-f6bbb57e9c96
there and in <wchar.h>. Any reason for not removing them in <wctype.h>? Or
maybe even nicer reverse the inclusion direction, i.e. remove the
duplicate protos in <wchar.h> and include <wctype.h> instead.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@20317 a95241bf-73f2-0310-859d-f6bbb57e9c96
change.
* The new notification functions are used instead of send_notification()
and notify_listener() now. Mapped them in the BeOS kernel emulation
accordingly. RamFS node monitoring seems to work now.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@20298 a95241bf-73f2-0310-859d-f6bbb57e9c96
Removed most data allocations/copying from PicturePlayer, ServerPicture now has to do this when converting coordinates.
Added additional functions to ViewLayer to copy&convert multiple BPoint, BRect, BRegion to Screen coordinates, those should be further optimized.
Removed some function call overhead.
Note: some functions of PicturePlayer don't appear to be implented by PictureDataWriter,
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@20292 a95241bf-73f2-0310-859d-f6bbb57e9c96
to B_FULL_LOCK.
* vm_clone_area() now respects the source area's wiring and inherits it. This
should fix bug #1055.
* vm_cache::type is now duplicated in vm_area::cache_type - this allows looking
it up without having to lock a vm_cache_ref; this also solves a locking bug
in vm_unmap_pages() in this regard.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@20281 a95241bf-73f2-0310-859d-f6bbb57e9c96
Monitor Routing rework
* mostly to fix my issues with dual monitors VGA + DVI which didn't work! ;)
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@20275 a95241bf-73f2-0310-859d-f6bbb57e9c96
* New "ATOM" BIOS Support for radeons X-series
* This also removes scanning for the BIOS signature for other cards
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@20272 a95241bf-73f2-0310-859d-f6bbb57e9c96
Basically, there was a pretty subtle race between the cpus in main where if the main cpu released the AP cpus and then before the AP cpus had a chance to run the boot cpu started creating the main thread (which causes smp ici messages to be created) the system would livelock, where the boot cpu waited forever for the AP cpu to acknowledge the ICI (for a TLB flush when creating the kernel stack).
Added smp_cpu_rendezvous(), used to synchronize all the cpus to a particular point, and used it a few times in main().
While i was at it i fixed another race that'll probably never happen, but what the hey. Make sure the kernel args are copied into kernel space by the main cpu before letting any other ones use it.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@20269 a95241bf-73f2-0310-859d-f6bbb57e9c96
* Made publish_vnode() available in userland. For old style FS add-ons
publish_vnode() is used when they request a new_vnode(). The semantics
of new_vnode() changed considerably in Haiku, but publish_vnode()
seems to do pretty much what the old new_vnode() did.
* The UserlandFS hosted RamFS begins to work under Haiku. It runs pretty
soon out of memory though (under vmware with 256 MB) and node
monitoring is broken ATM.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@20264 a95241bf-73f2-0310-859d-f6bbb57e9c96
old interface is completely done in userland ATM.
It becomes more and more obvious that we probably need to provide
the kernel add-on with a bit more information about what the client FS
interface supports in the first place, so we can save unnecessary trips to
the userland. Opening/closing attributes for a FS using the old style
interface could be handled completely in the kernel add-on, for instance
(even if we lose a bit of accuracy wrt to open modes etc.).
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@20258 a95241bf-73f2-0310-859d-f6bbb57e9c96
need via library libuserlandfs_beos_kernel.so. Fine-tuned the legacy headers
so they can by used by the the kernel interface emulation code as well as by
the add-ons. This is actually a bit hacky, since we build everything in the
Haiku build environment and thus mix these old headers and Haiku's.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@20254 a95241bf-73f2-0310-859d-f6bbb57e9c96
* vm_area and vm_page now have a new field "mappings" where they will store lists
of vm_page_mapping structures. vm_page::ref_count is gone, as it's no longer
needed (it was never updated correctly, anyway).
* vm_caches now have a type field, ie. CACHE_TYPE_RAM for anonymous areas - this
makes the stores a bit less independent, but is quite handy in several places.
* Added new vm_map_page() and vm_unmap_pages() functions to be used whenever you
map in or unmap pages into/from an area. They don't do much more than handling
vm_page::wired_count correctly right now, though (ie. B_LAZY_LOCK is now working
as expected as well).
* Moved the device fault handler to vm_map_physical_memory(); it was not really
used as a fault handler, anyway.
* Didn't notice Ingo's changes to the I/O space region broke lock_memory(). It
now checks the type of the area that contains the memory, and doesn't lock
anymore if not needed which solves the problem in a platform independent way.
* Implemented lock_memory() and unlock_memory() for real: they now change the
vm_page::wired_count member to identify pages that shouldn't be paged out.
* vm_area_for() now uses vm_area_lookup() internally.
* Fixed various potential overflow conditions with areas that reach 0xffffffff.
* Creating anonymous areas with B_FULL_LOCK no longer causes vm_soft_fault()
to be called, instead, the pages are allocated and mapped (via vm_map_page())
directly.
* Removed the _vm_ prefix for create_area_struct() and create_reserved_area_struct().
* Fixed a bug in vm_page_write_modified() that would not have enqueued pages that
failed to be written to the modified queue again when needed.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@20251 a95241bf-73f2-0310-859d-f6bbb57e9c96
interface. The classes actually interfacing with the client FS add-on still
need to be adjusted.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@20246 a95241bf-73f2-0310-859d-f6bbb57e9c96
* Renamed them, made everything static besides vm_allocate_early() (previous
vm_alloc_from_kernel_args()) which now allows you to specify a different
virtual than physical size, and therefore makes vm_alloc_virtual_from_kernel_args()
superfluous (which isn't exported anymore, and is now called allocate_early_virtual()).
* Enabled printing a stack trace on serial output on team crash - it doesn't hurt
for now, anyway.
* Cleanup.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@20244 a95241bf-73f2-0310-859d-f6bbb57e9c96
FS interface. Adjusted old hooks, but didn't add the new ones yet. The
module builds now at least.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@20235 a95241bf-73f2-0310-859d-f6bbb57e9c96
* Renamed a few parameters of the FS module hooks:
- *file in the attribute functions to *vnode
- v to vnode
- I could barely restrain myself from renaming the "_*" parameters. I
understand this marks return parameters, but I'd prefer a nicer prefix
or suffix (that doesn't makes you think this is a private/internal
identifier) like "out", "ret", "return", "result", or something similar.
I'd also like to propose renaming {read,write}_link() to
{read,write}_symlink(). Er, and do we need write_link() at all?
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@20226 a95241bf-73f2-0310-859d-f6bbb57e9c96
This fixes bug #242. The value is currently stored in a separate file.
* Removed some unused codes from ServerProtocol.h.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@20188 a95241bf-73f2-0310-859d-f6bbb57e9c96
The first use is to let the kernel decide what the preferred syscall mechanism is at boot time and copy the
appropriate user space code there. Can be used for routines the kernel can decide best how to use (memcpy, some
timing routines, etc).
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@20161 a95241bf-73f2-0310-859d-f6bbb57e9c96
the new cpuid stuff was apparently exacerbating an existing problem where various bits of low level
cpu code (specifically get_current_cpu) weren't really initialized before being used. Changed the
order to set up a fake set of threads to point each cpu at really early in boot to make sure that at
all points in code it can get the current 'thread' and thus the current cpu.
A probably better solution would be to have dr3 point to the current cpu which would then point to the
current thread, but that has a race condition that would require an int disable, etc.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@20160 a95241bf-73f2-0310-859d-f6bbb57e9c96
updated the mesa software addon to work again (maybe would need more work)
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@20137 a95241bf-73f2-0310-859d-f6bbb57e9c96
Now two complete tss structures exist within the per-cpu structure. Instead
of having to create a seperate area per each one, initialize them in place.
Also, the old mechanism to getting all of the cpus to get initialized was
subtly broken, but still managed to work. Now, just force all the cpus to
initialize at boot, which makes the actual swapping of esp0 somewhat simpler.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@20131 a95241bf-73f2-0310-859d-f6bbb57e9c96
* recursive_lock_unlock() now returns a void to mirror it's counterpart better;
use recursive_lock_get_recursion() if you're interested in the lock depth.
* switch_sem(), and release_sem() now don't do anything anymore in kernel startup
mode.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@20099 a95241bf-73f2-0310-859d-f6bbb57e9c96
for one quantum wasn't really a good idea, as this could get quite expensive for the thread
(depending on the system load, it might have taken a long time until the thread was scheduled
again, no matter what priority it was).
Also, calling thread_yield() in a loop would have taken 100% CPU time.
Now, we sort the thread into the queue as with any other thread, but we'll ignore it once.
This now guarantees an actual context switch, as well as a much fairer rescheduling policy
for threads calling that function.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@20077 a95241bf-73f2-0310-859d-f6bbb57e9c96
at boot, per cpu, detect the cpu, pull down all the relevant cpuid bits and
save them into the per-cpu structure. Changed most of the code scattered here
and there that reads the cpuid to use a new api, x86_check_feature, which looks
at the saved bits.
Also changed the system_info stuff to read from these bits.
While i was at it, refreshed all the bits to be current.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@20072 a95241bf-73f2-0310-859d-f6bbb57e9c96
Replaced the _kern_null syscall with _kern_is_computer_on.
is_computer_on_fire is a bit harder, since it returns a float from kernelland, which
at the moment isn't supported in haiku.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@20069 a95241bf-73f2-0310-859d-f6bbb57e9c96
* replaced new[] with malloc()/realloc() where appropriate - since we're messing with
the bits anyway, this makes the code slightly faster.
* however, we might want to throw some std::bad_alloc exceptions to deal correctly with
low memory situations.
* cleanup.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@20065 a95241bf-73f2-0310-859d-f6bbb57e9c96
this fixes bug #1005. As a result, the Disks icon will now appear in file panels
when you change that setting with a panel open.
* _ObserverList is now in the BPrivate namespace (and renamed to ObserverList).
* its BHandler map is now only temporarily used for handlers that do not belong to
a looper yet; when BHandler::SendNotices() is called, they will be transferred
into the BMessenger map.
* Invalid messengers are now removed from the map when encountered.
* Added TODO comments about a possible reference counting if a handler is added
twice to a list (right now, this will be ignored).
* All {Start|Stop}Watching() methods are now more or less safe to be used in low
memory situations (adding some items to the map can still throw an exception...).
* Renamed BHandler::InitData() to _InitData().
* Some refactoring and cleanup.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@20029 a95241bf-73f2-0310-859d-f6bbb57e9c96
* we now always flush the TLBs after having unmapped some pages.
* vm_soft_fault() could traverse to a source cache while it was being collapsed
by vm_cache_remove_consumer() - this is now no longer possible as the latter
marks the cache as busy when doing so, and the former now tests this flag and
locks the cache (via the new fault_acquire_locked_source() function).
* if fault_acquire_locked_source() fails with B_BUSY, the current cache is locked
again, and tested again for the page - as it might have been moved upwards to it
with the destruction of its former source.
* The cache delivering the page for vm_soft_fault() is now locked until the end;
it can no longer go away before having actually mapped the page into the area.
* This also fixes the issue where pages would get lost as vm_soft_fault() put the
page in the active list, no matter if its cache still existed.
* Also, we now keep a reference of to a cache in case a dummy page is inserted; this
makes again sure that it doesn't go away during the execution of vm_soft_fault()
(which could even add this page to the free list...).
* divided vm_soft_fault() into several smaller functions which should make it much
more readable.
* Added a "cache_chain" KDL command that dumps the whole chain until the bottom
when giving a pointer to a vm_cache as parameter.
* now usually call vm_cache_acquire_ref() before map_backing_store(), even though
it shouldn't be really needed (I added it for debugging purposes).
* Some minor cleanup.
* NOTE: a major problem still persists: when removing a vm_cache, it's possible
that some of its pages are still mapped, and there is currently no mechanism
to get rid of these mappings! I've added TODO comments into vm_cache.c where
appropriate.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@20028 a95241bf-73f2-0310-859d-f6bbb57e9c96
process group. This fixes bug #996.
* As a result, the process group stuff and wait_for_child() got much simpler;
get_death_entry() and update_wait_for_any() could go away completely.
* If a team goes away, all of its children are now "reparented" to the kernel team,
instead of the team's parent - this follows common implementations (and POSIX if
I understand it correctly), but not BeOS anymore. The OpenGroup Base says this
about this topic: "If a parent process terminates without waiting for all of its
child processes to terminate, the remaining child processes shall be assigned a
new parent process ID corresponding to an implementation-defined system process."
* We wait too long in wait_test_4 which at least puts us on par with Linux; see
comment in _user_setpgid().
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@20010 a95241bf-73f2-0310-859d-f6bbb57e9c96
C style ones, as this is a C header, too (and a very basic one).
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@19984 a95241bf-73f2-0310-859d-f6bbb57e9c96
feel free to change that ;-)
* Cleaned up existing headers.
* Coding style guide update to BBufferIO (renamed m_* members to f*).
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@19972 a95241bf-73f2-0310-859d-f6bbb57e9c96
with PostMessage() in case the message queue is full.
Some notes:
* for synchronous replies, we don't use this mechanism yet, but it could be
extended to do that as well.
* the code looks so complicated because we need a way to access the looper's
queue without locking it (to prevent deadlocks); like Dano's solution, I've
abused BTokenSpace to store a BDirectMessageTarget with a BHandler.
* we also need to decouple the lifetime of a looper's queue from its target,
as we cannot lock the looper, and therefore, can't guarantee it stays valid
as long as we're accessing it outside of BLooper.
* init_clipboard() now needs to be done after the global constructors have
been called - since sending messages now needs gDefaultTokens to be initialized.
Since this is done per image, it shouldn't cause any troubles, though.
* some minor cleanup, removed unused _msg_cache_cleanup_() and friends.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@19968 a95241bf-73f2-0310-859d-f6bbb57e9c96
* Got rid of unused BLooper members
* renamed fTaskID to fThread
* Removed private and deprecated AddLooper()/RemoveLooper()/... stuff; BLooper is now
directly calling BLooperList methods.
* Got rid of extensive and useless comments
* Made a few TODOs more clear
* Merged InitData() and InitData(...) to _InitData(...)
* BLooper::Team() now uses BPrivate::current_team(), sTeamID is gone now.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@19966 a95241bf-73f2-0310-859d-f6bbb57e9c96
* BLooper::AddMessage() is now using this method to determine wether or not to
update its looper thread.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@19956 a95241bf-73f2-0310-859d-f6bbb57e9c96
Use the size of the struct instead of checking a pointer that is never NULL...
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@19935 a95241bf-73f2-0310-859d-f6bbb57e9c96
It is supposed to be cleaner and more object oriented. It also adds some features (like a string getter for the interface) that were appearantly left out in the Be implementation.
It is currently built as a small static library from src/libs.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@19913 a95241bf-73f2-0310-859d-f6bbb57e9c96
Some files renamed. Won't build yet with our usb_raw driver due to different namings. classes need to be B-prefixed anyway. USBKit.h needs to be split like in zeta as well.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@19901 a95241bf-73f2-0310-859d-f6bbb57e9c96
some Pentium 200 MMX pretend to support MTRRs.
This should fix bug #553.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@19899 a95241bf-73f2-0310-859d-f6bbb57e9c96
* libprint based drivers can now show a preview window and show progress
window while printing contributed in part by Hartmut Reh.
* Libprint and PCL6 driver bug fixes.
* Code clean-up (removed code duplications, coding style, copyright text)
Builds under Linux. Not tested under BeOS.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@19882 a95241bf-73f2-0310-859d-f6bbb57e9c96
this fixes bug #227 again (which I recently opened again accidently).
* We actually switched the last consumer's source without having acquired its
lock! This fixes some rare random app crashes as well as potential kernel
crash ("cache to be deleted still has consumers").
* Some more comments to explain why things are done and can be done the way they
are done :-)
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@19878 a95241bf-73f2-0310-859d-f6bbb57e9c96
Switcher now works as expected.
* Renamed TRoster::ActivateApp() to UpdateActiveApp(), as the app is already activated
at that point (the registrar only keeps track of it).
* BWindow::DispatchMessage() now calls the new BRoster::Private::UpdateActiveApp()
method when it receives a B_WINDOW_ACTIVATED message.
* Added BRoster::_UpdateActiveApp() which calls the new B_REG_UPDATE_ACTIVE_APP.
* Removed now unused B_REG_ACTIVATE_APP.
* Minor cleanup.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@19857 a95241bf-73f2-0310-859d-f6bbb57e9c96
did for yellowTAB GmbH when I worked for then and is being used under permission.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@19840 a95241bf-73f2-0310-859d-f6bbb57e9c96
* "sc"/"where"/"bt" now prints the area where the function of the stack frame
is located in case there is no other information (using the above function).
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@19800 a95241bf-73f2-0310-859d-f6bbb57e9c96
Pending DPCs at queue death time are now called too, to avoid possible leaks.
Meanwhile, queue_dpc() will refuse to add another DPC and returns B_CANCELLED.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@19798 a95241bf-73f2-0310-859d-f6bbb57e9c96
two cache_refs - it needs to count the consumers of the lower cache to find
its actual number of references; the upper cache could still be in use by
someone else.
* There were several locking bugs in the VM code; since cache_ref::cache can
change, we must not access it without having the cache_ref locked.
* As a result, map_backing_store() now requires you to have the lock of the
store's cache_ref held.
* And therefore, some functions in vm_cache.c must no longer lock the cache_ref
on their own, but require the caller to have it locked already.
* Added the -s option to the cache/cache_ref KDL commands: it will only print
the requested structure, and not its counterpart (useful if accessing one
structure results in a page fault, as was possible previously).
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@19796 a95241bf-73f2-0310-859d-f6bbb57e9c96
Made the following changes from the version I got from Eric:
* made BppForSpace() in DriverInterface.h inline to remove some warnings
* renamed driver source files to lower case.
* removed Be Inc. copyright from kernel driver as I couldn't see anything coming
from Be Inc. there - correct me if I was wrong, Eric.
* Minor other changes like added missing header guards.
* The README provided in the main directory is only included in the accelerant
directory.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@19793 a95241bf-73f2-0310-859d-f6bbb57e9c96
the userland stack in an unsafe way - moved that stuff to arch_thread_enter_userspace(), too.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@19778 a95241bf-73f2-0310-859d-f6bbb57e9c96
turned off - accessing userland memory. Now, arch_thread_enter_userspace() does that
job, and as a result, may also fail.
* dump_thread() now directly prints the info of the current thread when used without
argument (rather than iterating the thread list to look for the current thread).
* If arch_thread_init_tls() fails upon thread creation, the function will now return
an error.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@19775 a95241bf-73f2-0310-859d-f6bbb57e9c96
them to commit substantially less memory (we we're committing about 40 MB (!) too much
after a complete system boot). This means you'll run out of memory less likely now.
* fill_area_info() no longer filters out kernel protection flags - we may want to keep
filtering them when called from userland, though, dunno.
* Added new debugger command "avail" which shows how much memory has been committed, and
how much is regarded as free space.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@19771 a95241bf-73f2-0310-859d-f6bbb57e9c96
Fixed most obvious issues, as reported by Marcus and Axel.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@19765 a95241bf-73f2-0310-859d-f6bbb57e9c96
to other kernel components.
* wait_for_thread_etc() will now search the team's death entries in case the
thread is already gone; also resume_thread() is now done later, and its return
code will no longer matter (as we already have our death entry, no matter if
the thread is gone now or not).
* The fibo_load_image test now works as expected (only tested with low numbers
yet, though - the mean testing comes later (first comes functionality) :-))
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@19758 a95241bf-73f2-0310-859d-f6bbb57e9c96
in addr_range.h to add ranges to the arrays. This fixes the crashing bug reported
by Larry Baydak.
* Added some more exported functions to kernel_args.cpp (prototypes are in addr_range.h).
* TODO: let the PPC/OpenFirmware implementation use those as well.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@19739 a95241bf-73f2-0310-859d-f6bbb57e9c96
app_server for this; added a new AS_IS_FRONT_WINDOW command for this.
For example, clicking on the menu bar to bring windows to front in FFM mode
does work now.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@19725 a95241bf-73f2-0310-859d-f6bbb57e9c96
* _ContrainPoint() was broken as it could never change the point it was supposed
to contrain.
* MouseDown() no longer sends a notification message automatically (only if it
changed something)
* MouseMoved() and synchronous MouseDown() will now only send modification messages
if something actually changed (not for every mouse update).
* After key presses, the invokation message is only sent when the value changed.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@19697 a95241bf-73f2-0310-859d-f6bbb57e9c96
auto scrolling to its own method, introduced a new private
StyledWidthUTF8Safe method.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@19694 a95241bf-73f2-0310-859d-f6bbb57e9c96
is done from inside the BMenu::_track() function, and not inside Pulse()
anymore. Patch by Lucasz Zemczak
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@19653 a95241bf-73f2-0310-859d-f6bbb57e9c96
* Unified UTF8CountChars and UTF8ToLength and removed the latter
* Rewrote UTF8CountBytes to use the more safe algorithm from UTF8CountChars
* Removed the unsafe count_utf8_bytes() function
This should fix bug #839. Marcus can you please review?
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@19624 a95241bf-73f2-0310-859d-f6bbb57e9c96
app_server. I added it at the end. Feel free to move it to a better spot, if
there is one. Note that putting it in the middle with require recompiling a lot
of things.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@19614 a95241bf-73f2-0310-859d-f6bbb57e9c96
