AMD C1E is a BIOS controlled C3 state. Certain processors families
may cut off TSC and the lapic timer when it is in a deep C state,
including C1E state, thus the cpu can't be waken up and system will hang.
This patch firstly adds the support of idle selection during boot. Then
it implements amdc1e_noarat_idle() routine which checks the MSR which
contains the C1eOnCmpHalt (bit 28) and SmiOnCmpHalt (bit 27) before
executing the halt instruction, then clear them once set.
However intel C1E doesn't has such problem. AMD C1E is a BIOS controlled
C3 state. The difference between C1E and C3 is that transition into C1E
is not initiated by the operating system. System will enter C1E state
automatically when both cores enters C1 state. As for intel C1E, it
means "reduce CPU voltage before entering corresponding Cx-state".
This patch may fix#8111, #3999, #7562, #7940 and #8060
Copied from the description of #3999:
>but for some reason I hit the power button instead of the reset one. And
>the boot continued!!
The reason is CPUs are waken up once power button is hit.
Signed-off-by: Fredrik Holmqvist <fredrik.holmqvist@gmail.com>
* make the system catalog a BCatalog instead of a BCatalogAddOn*,
such that using a non-existing system catalog won't crash but
simply return the untranslated string instead
* rename MutableLocaleRoster::GetSystemCatalog() to LoadSystemCatalog()
and adjust it to use BCatalog::SetTo() in order to replace the
data used by the given catalog
* adjust all users of gSystemCatalog accordingly
* use a locker to protect the CatalogAddOn-chain against parallel
access
* rename BCatalog::SetCatalog() to SetTo() and make it a proper
initializing function
* adjust implementation of BLocaleRoster accordingly
* unify pointer style (to type* )
* always use boolean expressions in if
* introduce some spacing for better readability
* make a couple inline methods non-inline
The gcc2 cross-compiler built on Mac OS X Lion has a bug in it
where it is erroring with 'cast specifies signature type' when
assigning 0 or NULL to a pointer to a member fuction. NULL in this
instance is correctly converted to 0 since it is illegal to assign
((void*)0) to a pointer to a member function. However, it should
be legal to assign 0 to a pointer to a member function. Thus, there
is a bug. Since I can't fix the gcc2 compiler I am working around
this bug by assigning the pointer to a do nothing function instead.
My host compiler version is
i686-apple-darwin11-gcc-4.2.1 (GCC) 4.2.1 (Apple Inc. build 5666) (dot 3)
The same error occurs using the default gcc-llvm compiler and
a standard gcc 4.61 built from source. This bug does not occur on
Mac OS X 10.6 gcc2 or gcc4, nor does it occur on Mac OS X 10.7 with
the gcc4 cross-compiler.
If and when we decide to finally leave gcc2 behind we can revert this
change.
* General DisplayPort functions in common dp.cpp
* DP port information struct in common header
* Please don't use this private accelerant common DP
code just yet as it is very early.
* If dladdr can't find an exact match, it returns the nearest symbol
less than the given address.
* If no suitable symbol can be found, but the address is within a
loaded library, dladdr returns the library name and base address.
Signed-off-by: Ingo Weinhold <ingo_weinhold@gmx.de>
* Make the locale kit a part of libbe.
* Drop the LocaleBackend kludge used from within libbe (and from
other places, too) in order to access system catalog strings.
This is now done via gSystemCatalog, which is provided and initialized
by libbe.
* Drop all references to liblocale.so from all Jamfiles.
* Add legacy symlink liblocale.so in order to keep optional packages
that rely on it in a working state.
TODO: the documentation hasn't been updated.
* added optional feature package for freetype 2.4.6 gcc4/gcc2 x86 and gcc4 ppc.
* FT_CONFIG_OPTION_SUBPIXEL_RENDERING is disabled, --include-patented-code doesn't
change this setting anymore. This would require different packages.
* drop freetype sources and headers from the tree.
* fix decorators, test app server and appearance to use feature package headers.
* hybrid build untested.
* The AtomBIOS timeout fix has made my DP bridge
stop working
* The current DisplayPort code is a little lacking
on DP link training... I think thats the cause.
* This puts the first steps towards DP training
in place.
* I plan on trying to make some of this DP stuff
common accelerant stuff after it works.
* This makes future changes less troublesome, although we should also add
some virtual slots there (probably just dozens of it, though, that's why
I was being lazy).
* Don't pass messages by value; they are copied twice this way.
* Minor coding style corrections, automatic whitespace cleanup.
* Rather than duplicating the decision taking logic involving wheter or not to draw
the outline or glow in every replicant, update be_control_look to make it more
generic.
* The Monitoring of the background preferences is now only done in Tracker (where it
was already being done).
* Add a BControlLook::B_IGNORE_OUTLINE flag to avoid this new behaviour.
* Remove that said logic from ActivityMonitor and use be_control_look.
* Use the ignore flag in DeskCalc to avoid the outline in its case.
Should fix#7716, #7291.
* Prepend x86_ to non-static x86 code
* Add x86_init_fpu function to kernel header
* Don't init fpu multiple times on smp systems
* Verified fpu is still started on smp and non-smp
* SSE code still generates general protection faults
on smp systems though
* maintain a list of all BPictures to do so
* BView downloads the BPicture data after recording the picture. This could probably done more efficiently using shared memory in the first place.
* Rename init_sse to init_fpu and handle FPU setup.
* Stop trying to set up FPU before VM init.
We tried to set up the FPU before VM init, then
set it up again after VM init with SSE extensions,
this caused SSE and MMX applications to crash.
* Be more logical in FPU setup by detecting CPU flag prior
to enabling FPU. (it's unlikely Haiku will run on
a processor without a fpu... but lets be consistant)
* SSE2 gcc code now runs (faster even) without GPF
* tqh confirms his previously crashing mmx code now works
* The non-SSE FPU enable after VM init needs tested!
* add Wcscoll() and Wcsxfrm() ICU locale backend
* provide implementations of wcscoll() and wcsxfrm() that are using
the respective methods of the locale backend
* Casts like BReference<Derived> to BReference<Base> are now possible.
* This cast for BWeakReference is, because of the underlying structure, not automatically type safe. I used a simple hack to make the compiler complain if the cast
is not type safe. Please take a look if that can be done better.
* Smaller style and bug fixes.
* make room in mbstate_t for containing an ICU-converter's state
(well, in fact the whole converter object)
* adjust libroot's locale add-on to clone converters into a given
mbstate_t directly
* adjust ICUThreadLocalStorageValue to contain the converter pointer
instead of a converter-ID (if the converter is related to an
mbstate_t, it points into the mbstate_t).
* adjust users of converters to directly use converter pointers
instead of ICUConverterRef
* drop now unused ICUConverterManager and ICUConverterRef
* update gcc4 optional package
This brings our multibyte implementation into a fully working state,
both non-ascii and non-8-bit characters can now be handled normally
in the Terminal, i.e. this finally fixes#6276.
N.B.: Since the size of mbstate_t has changed, everything (including
the compiler!) needs to be rebuilt.
* I'd rather this be common code, but I don't have access
to the DisplayPort specifications. If I added it as common
code I would want to be 100% it was complete and variables
were named properly.
* For now putting in radeon_hd private headers
* add MultibyteStringToWchar() to ICU locale backend
* implement mbsrtowcs() and mbsnrtowcs() on top of
MultibyteStringToWchar()
* drop respective glibc files
It turns out,this is an old method added by Be, and is not really related to BView::InvalidateLayout(bool). In fact BMenu::InvalidateLayout() does something separate, but related to the BView method. I was wrong to delete this method, since it needs to have action taken each time it is called, so moving these actions into LayoutInvalidated() only worked sometimes (when the BView was considered to have a valid layout).
I have added a comment for future hackers so that they don't delete this method.
This one works with non-terminated strings that we may need to handle.
It also validates that the sequence is valid UTF-8 so it results in
the same behaviour as the version that is used when converting to
codes (syncing the enumeration and drawing behaviour).
This allows to use the debug features of the guarded heap also on
allocations made through the object cache API. This is obivously
horrible for performance and uses up huge amounts of memory, so the
initial and grow sizes are adjusted accordingly.
Note that this is a rather simple hack, using the object_cache pointer
to transport the allocation size. The alignment is neglected completely.
This adds a pair of functions vm_prepare_kernel_area_debug_protection()
and vm_set_kernel_area_debug_protection() to set a kernel area up for
page wise protection and to actually protect individual pages
respectively.
It was already possible to read and write protect full areas via area
protection flags and not mapping any actual pages. For areas that
actually have mapped pages this doesn't work however as no fault, at
which the permissions could be checked, is generated on access.
These new functions use the debug helpers of the translation map to mark
individual pages as non-present without unmapping them. This allows them
to be "protected", i.e. causing a fault on read and write access. As they
aren't actually unmapped they can later be marked present again.
Note that these are debug helpers and have quite a few restrictions as
described in the comment above the function and is only useful for some
very specific and constrained use cases.
They can be used to mark pages as present/non-present without actually
unmapping them. Marking pages as non-present causes every access to
fault. We can use that for debugging as it allows us to "read protect"
individual kernel pages.
* The vm86 code or the code running in virtual 8086 mode may clobber the
%fs register that we use for the CPU dependent thread local storage
(TLS). Previously the vm86 code would simply restore %fs on exit, but
this doesn't always work. If the thread got unscheduled while running
in virtual 8086 mode and was then rescheduled on a different CPU, the
vm86 exit code would restore the %fs register with the TLS value of
the old CPU, causing anything using TLS in userland to crash later on.
Instead we skip the %fs register restore on exit (as do the other
interrupt return functions) and explicitly update the potentially
clobbered %fs by calling x86_set_tls_context(). This will repopulate
the %fs register with the TLS value for the right CPU. Fixes#8068.
* Made the static set_tls_context() into x86_set_tls_context() and made
it available to others to faciliate the above.
* Sync the vm86 specific interrupt code with the changes from hrev23370,
using the iframe pop macro to properly return. Previously what was
pushed in int_bottom wasn't poped on return.
* Account for the time update macro resetting the in_kernel flag and
reset it to 1, as we aren't actually returning to userland. This
didn't cause any harm though as only the time tracking is using that
flag so far.
* Some minor cleanup.
Apparently I should have done a complete rebuild after moving
directories.h from headers/private/libroot to .../system, since a lot of
stuff didn't build anymore.
The implementation is temporary. Currently it reads through the packages
in the respective packages directory and checks against the package
links. Once package activation is tracked explicitly we'll use the
activation file/directory.
A BPackageContentHandler subclass that initializes a BPackageInfo from
the read package attributes. Pulled out of RepositoryWriterImpl's
PackageContentHandler.
* Remove InitCheck() and the initializing constructor.
* Rename PackageCount() to CountPackages().
* Use BOpenHashTable instead of HashMap for the internal PackageMap.
* Allow multiple packages with the same name. Equally named packages are
in a singly linked list after the first package with that name.
* Add an Iterator inner class and a GetIterator() method, so one can now
iterate through the packages in the repository.
The attribute is intended for simplifying package building. The
package's install path will be used for the package's .self package
symlink, allowing installation to a temporary directory when building
the package.
* AVLTreeMap::_GetKey(): Change return type from const Key& to Key, so
the strategy can do that as well and doesn't have have a Key object in
the node.
* Fix the Auto strategy: It was using the undefined _GetKey() instead
of GetKey().
Extended policy by IndexIteratorSuspend() and IndexIteratorResume()
methods that are invoked for the index iterator by Query::GetNextEntry()
after entering respectively before exiting.
both:
* Add Previous()/Next().
* Add Insert() version that returns a Node* instead of an Iterator.
* Add Remove() version that takes a Node* instead of a key.
TwoKeyAVLTree:
* Add GetIterator() version that takes an additional Node*, i.e.
initializing an iterator to point to the node.
* Add Iterator::CurrentNode().
This is a tree implementation with elements with primary and secondary
key. The code is a cleaned up version of ramfs's implementation. ramfs
doesn't use this version yet.
Add flags parameter to BPackageWriter::Init() (and the private
implementation classes) to indicate that an existing package file shall
be updated instead of created. Currently that always happens in-place.
When compression doesn't save space, using it nonetheless results in a
file that the reader complains about. So we fall back to writing an
uncompressed package attributes section in such a case.
The same still needs to be done for the TOC section.
* Add hooks HandleSectionStart() and HandleSectionEnd(). They are
invoked to bracket package file section, so the handler can
discriminate which section the attributes belong to.
HandleSectionStart() features a return parameter _handleSection, which
allows to handler to pick which sections it wants to handle.
* "package dump" does now print the section names.
If a FD is specified, instead of using the file with the given the FD is
used. Allows for adding entries without first copying them into the
directory structure.
This makes opening symlinks work universally in the build system tools.
Two mechanisms have been implemented, both of which don't always work.
The first is remapping via preprocessor macros. This fails where equally
named methods are used (e.g. STL fstream::open()). The other is using
hidden functions in the new libroot_build_function_remapper.a that is
linked into everything that is linked against libroot_build.so. This one
fails for functions that are defined inline in headers (Linux/glibc does
that). Together they seem to cover our build system needs ATM.
To avoid a clash with the regular version or an extra attribute level we
use the "package:provides.compatible" package attribute instead of
"package:version.major".
* The version string pattern is now:
<major>[.<minor>[.<micro>]][-<pre>][-<release>]
* Introduce B_HPKG_ATTRIBUTE_ID_PACKAGE_VERSION_PRE_RELEASE package
attribute.
* Add "preRelease" field to BPackageVersionData.
* Add "preRelease" property to BPackageVersion and packagefs's Version.
* Adjust package reader and writer code accordingly.
* Add support function vfs_get_mount_point(), so a file system can get
its own mount point (i.e. the node it covers). Re-added
fs_mount::covers_vnode for that purpose -- the root node isn't know to
the VFS before the mount() hook returns.
* Add function vfs_bind_mount_directory() which bind-mounts a directory
to another. The Vnode::covers/covered_by mechanism is used, so this
isn't true bind-mounting, but sufficient for what we need ATM and
cheaper as well. The vnodes connected thus aren't tracked yet, which
is needed for undoing the connection when unmounting.
* get_vnode_name(): Don't use dir_read() to read the directory. Since we
have already resolved vnode to the covered vnode, we don't want the
dirents to be "fixed" to refer to the covering nodes. Such a vnode
simply wouldn't be found.
* Introduce Vnode flags for covered and covering. Can be used as a quick
check when one doesn't already hold sVnodeLock.
* Rename resolve_mount_point_to_volume_root() to
resolve_vnode_to_covering_vnode().
* Adjust all code that deals with transitions between mount points and
volume root vnodes to generally support covered/covering vnodes.
Bring the changes that aren't package management related and the ones
that are but don't take effect as long as they are ignored by the build
system into the master.
Summary of changes:
* Introduce private header <directories.h> with constants for a good
deal of paths that should usually be retrieved via find_directory().
* Replace hard-coded paths by using find_directory() or the
<directories.h> constants (e.g. in drivers and the kernel).
* Add find_directory() constants needed for package management.
* Add __HAIKU_ABI_NAME and B_HAIKU_ABI_NAME macros.
* src/apps/deskbar: BeMenu.* -> DeskbarMenu.*,
DeskBarUtils.* -> DeskbarUtils.*
* Change deskbar menu settings directory from ~/config/be to
~/config/settings/deskbar.
* Other smaller cleanups, changes, and fixes.
* add temperature query support for Juniper, Sumo, Evergreen, and North Islands
* add missing thermal defines for evergreen cards
* northern island cards use the evergreen thermal calculations
* add errno_private.h, which defines the __set_errno() macro with
and without tracing
* instead of setting errno manually, all libroot's code now invokes
__set_errno(), which makes it much easier to trace changes to errno
* redirect glibc's use of __set_errno() to our own version
* update copyrights of locale backend files
Multibyte-support has been rewritten to use ICU as backend.
While this does not necessarily work properly in every aspect
(e.g. the shell still has [different] problems with multibyte-
characters now), it does fix#6263 and #7700.
* add implementations for the following multibyte-related
functions:
btwoc()
mblen()
mbrlen()
mbrtowc()
mbsinit()
mbtowc()
wcrtomb()
wcswidth()
wctob()
wctomb()
* the implementation of the above function live in a symbol
named __<name>, the above symbol names are defined as a weak
alias to the internal ones - TODO: we need to make sure to
only invoked the internal functions (i.e. prepended with __)
in order to avoid problems with symbol preemption.
* deactivate the limited mb implementation we provided before,
as well as respective stuff from glibc
* This doesn't necessarily belong here, but we're going to make use
of it in the next changeset. Additionally, this change to BeBuild.h
will trigger a rebuild of nearly all files, and applying it during
the multibyte-related work will skip another full rebuild ...
* add actual converter methods MultibyteToWchar() and WcharToMultibyte()
to locale backend and implement them in the ctype subpart
* add management code for maintaining converters referenced by mbstate_t
