Temporarily removed the VESA driver, as long as it only builds on x86.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@25913 a95241bf-73f2-0310-859d-f6bbb57e9c96
controller. The device doesn't use the PCI_ide subclass (but
PCI_mass_storage_other) and requires not using compatibility mode. Otherwise
it's pretty much the generic_ide_pci driver.
* Directly adding the driver to the image.
This driver could either be merged into the generic ide driver so it supports
not quite standard devices, or this could be made into a driver that collects
all those non standard devices. Either way, this works for now and lets my
machine boot off the IDE drive :-)
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@25868 a95241bf-73f2-0310-859d-f6bbb57e9c96
should make default images bootable from USB automatically. DDing one to a
USB stick should work out of the box then (but this wipes the stick of course).
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@25836 a95241bf-73f2-0310-859d-f6bbb57e9c96
-nostdlib disables that for executables although it should be enabled by
default.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@25785 a95241bf-73f2-0310-859d-f6bbb57e9c96
* Minor cleanup of ide_isa, and generic_ide_pci (removed wrapper.h).
* Added ide_isa back to the image.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@25755 a95241bf-73f2-0310-859d-f6bbb57e9c96
either, it just hangs there trying ot connect and eventually times out.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@25751 a95241bf-73f2-0310-859d-f6bbb57e9c96
* Added legacy_sata and scsi_cd back to the image.
* Minor cleanup in scsi_disk.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@25739 a95241bf-73f2-0310-859d-f6bbb57e9c96
* Renamed scsi_dsk to scsi_disk.
* Joined all scsi_disk sources together to a single scsi_disk.cpp file.
* Cleanup.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@25737 a95241bf-73f2-0310-859d-f6bbb57e9c96
packages. Print an error message for unavailable packages.
* Detect the build of a GCC2/GCC4 hybrid image and install GCC2 packages
on a GCC4 build where no GCC4 package is available. I did not test
every GGC2 package on a GCC4 build, though I have not found any that
does not work. If a package gives problems, feel free to disable it
for the hybrid build or send me a note.
* Add new optional package for Beam. Though I could not test it since,
SATA AHCI does not work for me ATM. I know that Beam 1.1 for BONE is
unable to retrieve mails (times out). Maybe the R5 version has better
luck, will check later.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@25695 a95241bf-73f2-0310-859d-f6bbb57e9c96
* Removed std_ops(), as it wasn't used for anything, and is optional in Haiku.
* ide_isa, and legacy_sata are still waiting for the same set of changes :-)
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@25678 a95241bf-73f2-0310-859d-f6bbb57e9c96
* Moved devfs from fs/ to device_manager/, and separated the legacy driver
support from it.
* Removed fast_log module.
* There are a couple of (temporary) regressions, though:
- legacy SATA and ISA IDE support is disabled, the drivers haven't been
ported yet.
- The not yet used ATA bus manager hasn't been ported yet, either.
- AHCI changes have not been tested.
- the listdev command has been removed from the build (as it currently
doesn't work anymore).
- device manager generated IDs currently are not freed anymore when a device
node is removed.
- generic drivers can't yet use the new driver architecture.
- simple busses that do not support device types won't work yet.
- legacy driver publishing/unpublishing (ie. what USB needs) has not been
tested, and may be broken.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@25662 a95241bf-73f2-0310-859d-f6bbb57e9c96
Gerald Zajac. Thanks a lot!
* Also put it on the image by default.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@25583 a95241bf-73f2-0310-859d-f6bbb57e9c96
* Made the pthread_cond_t internals public. This is necessary to support
process shared condition variables. Fixed initializer macro.
* Made the pthread_rwlockattr_t structure opaque.
* pthread_t is no longer typedef'ed to int. It's the pointer to the
internal _pthread_thread structure.
* Removed __get_pthread(). pthread_self() can be used instead.
* No longer tunnel the pthread exit value through Haiku's thread exit
value. We do have a separate field in the _pthread_thread structure
for it, now.
* Handle detaching of threads correctly.
* pthread_rwlockattr_{g,s}etpshared() use the
PTHREAD_PROCESS_{SHARED,PRIVATE} constants, now.
* Commented out yet unsupported structures (barriers, spinlocks).
* Rebuilt APR optional package. The pthread changes weren't binary
compatible.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@25582 a95241bf-73f2-0310-859d-f6bbb57e9c96
* made the output easier to observe
* added the sigsuspend_6-1 test to the package
* made the fork_3-1 test return when it fails
* added output to the pthread_once tests
* other minor cosmetic changes
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@25567 a95241bf-73f2-0310-859d-f6bbb57e9c96
pointer also contains the toggle carry and the halt bit (which was obviously
always set as the endpoint had an error) the address comparison failed and
the head was dead in the water with all further transfers timing out until
a subsequet cancel cleaned the mess up again.
* Add the OHCI host controller driver to the image as it should now be fully
functional except for isochronous transfers.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@25565 a95241bf-73f2-0310-859d-f6bbb57e9c96
4). One has to have a (fully configured) "generated" directory for the
alternative gcc and specify it using the new option
"--alternative-gcc-output-dir" when configuring the main build.
Additionally the build variable HAIKU_ADD_ALTERNATIVE_GCC_LIBS has to be
set to "1".
If that has been done, when building the image a sub-jam is invoked that
generates the alternative libs and zips them. The main-jam unzips them
into the correct directory in the image. Note that the JAM build
variable has to be set when using a jam executable not invoked by "jam".
Tested with gcc 2 NetPositive, Pe, and FireFox under gcc 4 Haiku, and
with a few of the standard gcc 4 Haiku apps under gcc 2 Haiku. Seems to
work fine so far.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@25536 a95241bf-73f2-0310-859d-f6bbb57e9c96
the targets/symlinks added to a container/Haiku image directory.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@25535 a95241bf-73f2-0310-859d-f6bbb57e9c96
Added a new command line utility "mkfs" which can initialize a given volume
with a file system by it's short name via the new Disk Device API.
Thanks!
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@25491 a95241bf-73f2-0310-859d-f6bbb57e9c96
- fix build (at least CodyCam), NETAPI lib is now libnetapi for Haiku...
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@25488 a95241bf-73f2-0310-859d-f6bbb57e9c96
to contain headers shared by kernel and userland (mainly libroot).
* Moved quite a few private kernel headers to the new location. Split
several kernel headers into a shared part and one that is still kernel
private. Adjusted all affected Jamfiles and source in the standard x86
build accordingly. The build for other architectures and for test code
may be broken.
* Quite a bit of userland code still includes private kernel headers.
Mostly those are <util/*> headers. The ones that aren't strictly
kernel-only should be moved to some other place (maybe
headers/private/shared/util).
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@25486 a95241bf-73f2-0310-859d-f6bbb57e9c96
* The built-in services are no longer added as resource to libnetwork,
but as attribute. This removes the libbe dependency.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@25485 a95241bf-73f2-0310-859d-f6bbb57e9c96
AddLicenseToHaikuImage that can be used in optional package definitions
to add a copyright entry in AboutSystem and add a license file to
/etc/licenses.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@25313 a95241bf-73f2-0310-859d-f6bbb57e9c96
(just "sshd"), ATM. Not sure how we want to deal with daemons, yet.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@25311 a95241bf-73f2-0310-859d-f6bbb57e9c96
a bit:
* Added directory /etc/post_install, which can contain scripts that will
be executed on the first boot.
* Moved the mimeset invocations to such a script. Use the "-apps"
option instead of "-all". Since create_app_meta_mime() (and thus
mimeset) work recursively now, running the commands does actually have
an effect.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@25309 a95241bf-73f2-0310-859d-f6bbb57e9c96
paths by default, but I guess we want to keep it that way.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@25137 a95241bf-73f2-0310-859d-f6bbb57e9c96
