* This is the bulk of the work. Anything else should be
minor cleanups and tweaking.
* riscv64 isn't a viable EFI platform yet.. just acting
as a stand-in to test a non-x86 EFI haiku_loader
Change-Id: Ib03de81e2b562e693987b86d7b4318209fb1c792
Reviewed-on: https://review.haiku-os.org/c/haiku/+/2256
Reviewed-by: Alex von Gluck IV <kallisti5@unixzen.com>
Reviewed-by: Adrien Destugues <pulkomandy@gmail.com>
* Move x86 hpet behind timer interface.
* Add a few if x86,x86_64 macros to start.cpp.
Change-Id: I583ec1b064785182e6d48dfbcd91b1bb2ead4b44
Reviewed-on: https://review.haiku-os.org/c/haiku/+/1929
Reviewed-by: Alex von Gluck IV <kallisti5@unixzen.com>
Change-Id: I88afad6d071e8b577c23da9c60392c60b3726514
Reviewed-on: https://review.haiku-os.org/c/haiku/+/1895
Reviewed-by: Alex von Gluck IV <kallisti5@unixzen.com>
Reviewed-by: Adrien Destugues <pulkomandy@gmail.com>
Sparcv9 runs Openboot in 64 bit mode, which means the cell size is
64bit. Use intptr_t where appropriate to make the open firmware calls
work.
Beware, some values are still 32bit, this matters for example for
of_getprop, if you get 32bits into a 64bit variables it will be in the
MSB of it (big endian only weakness...) and confuse things. See for
example in console.cpp, where the input and output handles are retrieved
as 32bit values. It seems wise to check the expected size when using
of_getprop in these cases, instead of just checking for errors.
Change-Id: Ie72ebc4afe7c6d7602a47478f0bfb6b8247004b8
Reviewed-on: https://review.haiku-os.org/c/1369
Reviewed-by: waddlesplash <waddlesplash@gmail.com>
memset uses rep stosb on x86 during boot, with memory
not set to write-combining, which makes it slow.
Instead we do aligned writes of 2 x four bytes at once.
Only clear the minimum of size and width * height * 4
UEFI framebuffer size can be huge, upto 512MB here,
and rep stosb seems to be around 25-30MB/s
This is written as generic as possible to work on
old compilers and different platforms, without
expecting boot memset to be optimized.
This makes it almost unnoticable compared to not
clearing.
Writes to videomem is slow without memory remapping
Can't do the mapping without leaving UEFI, so skipping
the clear. Afaict it should always be cleared by UEFI
This saves ~10 seconds of booting on my machine
(1920*1080*4 bytes)
EFI video mode (should have been it's own commit)
* Only do strcmp if there are enough params
* break when found
* Only set HAIKU_BOOT_PLATFORM to bios_ia32 if not defined
* Add gnuefi build feature
* Introduce BOOT_LDFLAGS, and move options for passing to linker
into ArchitectureSetup
* x86_64 compile fixes for warnings in boot loader
* loader/elf.cpp: don't include ELF32 support when targeting EFI
* relocation_func.cpp: copy of the relocation code from gnuefi
to make _relocate extern "C", and avoid including <efilib.h>
* boot_loader_efi.ld: copy of gnuefi's elf_x86_64_efi.lds,
modified to include support for C++ constructors, etc. Keep in
sync with the gnuefi package
Signed-off-by: Jessica Hamilton <jessica.l.hamilton@gmail.com>
* Set max cpu to 1 for PPC until atomic functions are finished
* We have atomic functions inline in the kernel and assembly
code in libroot post-scheduler merge... isn't that a lot of
duplication?
Since both platforms can boot the same kernel we must accept either
arg, so we make sure they are identical for now.
TODO: use a union or KMessage maybe?
Since we're using multi-part uImage format, we can add the FDT as
a seperate "blob" in the uImage, if the used U-Boot version is not
"FDT enabled".
This is used for example for our Verdex target. Currently I've got
a local hack in the platform/u-boot/Jamfile, looking into pulling
in the FDT files and a proper Jam setup to do that properly...
* For now let's include the same fields in platform_kernel_args
than in the OF version.
* This allows linking the kernel.
Later on we should allow supporting more than a single boot platform,
to have a single kernel per arch.
* Added a FixedWidthPointer template class which uses 64-bit storage to hold
a pointer. This is used in place of raw pointers in kernel_args.
* Added __attribute__((packed)) to kernel_args and all structures contained
within it. This is necessary due to different alignment behaviour for
32-bit and 64-bit compilation with GCC.
* With these changes, kernel_args will now come out the same size for both
the x86_64 kernel and the loader, excluding the preloaded_image structure
which has not yet been changed.
* Tested both an x86 GCC2 and GCC4 build, no problems caused by these changes.
* x86_64 is using the existing *_ia32 boot platforms.
* Special flags are required when compiling the loader to get GCC to compile
32-bit code. This adds a new set of rules for compiling boot code rather
than using the kernel rules, which compile using the necessary flags.
* Some x86_64 private headers have been stubbed by #include'ing the x86
versions. These will be replaced later.
CFE is used in the upcoming Amiga X-1000 dualcore PPC board.
* Largely inspired by the OF and U-Boot code.
* Still largely stubbed out.
* The loader builds but I don't have a machine to test it. Anyone interested?
to a panic at boot.
* Make the panic message more explicit when there is no more room left.
This should hopefully fix#7869.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@42715 a95241bf-73f2-0310-859d-f6bbb57e9c96
menu item it's associated with rather than an input string. This allows it
to calculate the position to start the input at, as well as the correct
line to place it on. The previous solution always put the input at the
center line, which happened to be the right place by happy coincidence
unless one also had the menu items for viewing/saving the debug syslog
present.
* Implement input buffer scrolling, and consequently lift the previous size
limit on user input (it is now only limited by the size of the passed in
buffer).
* Implement parsing of the input buffer to allow it to handle comma-separated
options. Thus, one can now input things like "disable_smp true, serial_debug_output false"
and it will be handled properly.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@41706 a95241bf-73f2-0310-859d-f6bbb57e9c96
aren't otherwise exposed via the safe mode menus. The option can be
found under the debug options menu, where additional settings can be
added one at a time with the same syntax used in kernel settings files
(i.e. disable_acpi on).
Scrolling of the input buffer is not yet supported (will implement that
soon), so currently the input is clamped to the size of one line. This
shouldn't be a problem for our current set of options though.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@41577 a95241bf-73f2-0310-859d-f6bbb57e9c96
* Made the page table allocation more flexible. Got rid of sMaxVirtualAddress
and added new virtual_end address to the architecture specific kernel args.
* Increased the virtual space we reserve for the kernel to 16 MB. That
should suffice for quite a while. The previous 2 MB were too tight when
building the kernel with debug info.
* mmu_init(): The way we were translating the BIOS' extended memory map to
our physical ranges arrays was broken. Small gaps between usable memory
ranges would be ignored and instead marked allocated. This worked fine for
the boot loader and during the early kernel initialization, but after the
VM has been fully set up it frees all physical ranges that have not been
claimed otherwise. So those ranges could be entered into the free pages
list and would be used later. This could possibly cause all kinds of weird
problems, probably including ACPI issues. Now we add only the actually
usable ranges to our list.
Kernel:
* vm_page_init(): The pages of the ranges between the usable physical memory
ranges are now marked PAGE_STATE_UNUSED, the allocated ranges
PAGE_STATE_WIRED.
* unmap_and_free_physical_pages(): Don't free pages marked as unused.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@35726 a95241bf-73f2-0310-859d-f6bbb57e9c96
Remove the 4 cores limit at boot, and fix the allocator to handle 8 cores.
There are still performance problems, but this allows booting with 8 cores.
WARNING: since this changes x86 platform kernel args, you really don't want to update haiku_loader and kernel_x86 separately!
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@33349 a95241bf-73f2-0310-859d-f6bbb57e9c96
- don't clobber the parameter regs in the entry point,
- fix entry point address for netbsd loader emulation,
- added a gUImage global to point to the uimage blob with the tgz,
- added tgz info to platform stage2 args,
- add simple uimage support, just dumps the header and gets the nth blob in the image, (seems we have a bug in the math code, some infos don't print),
- made devices.cpp use them to publish the MemoryDisk,
- add an haiku_loader_nbsd.ub target which puts both the loader and kernel_arm for now (need to replace with the tgz).
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@32295 a95241bf-73f2-0310-859d-f6bbb57e9c96
* Images preloaded by the boot loader had to be modules to be of any use
to the kernel. Extended the mechanism so that any images not accepted
by the module code would later be tried to be added as drivers by the
devfs. This is a little hacky ATM, since the devfs manages the drivers
using a hash map keyed by the drivers inode ID, which those drivers
obviously don't have.
* The devfs emulates read_pages() using read(), if the device driver
doesn't implement the former (all old-style drivers), thus making it
possible to BFS, which uses the file cache which in turn requires
read_pages(), on the device. write_pages() emulation is still missing.
* Replaced the kernel_args::boot_disk structure by a KMessage, which can
more flexibly be extended and deals more gracefully with
arbitrarily-size data. The disk_identifier structure still exists,
though. It is added as message field in cases where needed (non net
boot). Moved the boot_drive_number field of the bios_ia32 platform
specific args into the message.
* Made the stage 1 PXE boot loader superfluous. Moved the relevant
initialization code into the stage 2 loader, which can now be loaded
directly via PXE.
* The PXE boot loader does now download a boot tgz archive via TFTP. It
does no longer use the RemoteDisk protocol (it could actually be
removed from the boot loader). It also parses the DHCP options in the
DHCPACK packet provided by PXE and extracts the root path to be
mounted by the kernel.
* Reorganized the boot volume search in the kernel (vfs_boot.cpp) and
added support for network boot. In this case the net stack is
initialized and the network interface the boot loader used is brought
up and configured. Since NBD and RemoteDisk are our only options for
net boot (and those aren't really configurable dynamically) ATM, the
the boot device is found automatically by the disk device manager.
Booting via PXE does work to some degree now. The most grievous problem
is that loading certain drivers or kernel modules (or related activity)
causes a reboot (likely a triple fault, though one wonders where our
double fault handler is on vacation). Namely the keyboard and mouse input
server add-ons need to be deactivated as well as the media server.
A smaller problem is the net server, which apparently tries to
(re-)configure the network interface we're using to boot, which
obviously doesn't work out that well. So, if all this stuff is disabled
Haiku does fully boot, when using the RemoteDisk protocol (not being
able to use keyboard or mouse doesn't make this a particular fascinating
experience, though ;-)). I had no luck with NBD -- it seemed to have
protocol problems with the servers I tried.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@21611 a95241bf-73f2-0310-859d-f6bbb57e9c96
This allowes to actually execute the boot loader now.
Need to use Ingo's remote_disk_server now for booting.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@19113 a95241bf-73f2-0310-859d-f6bbb57e9c96
We don't do anything with it yet, though, so the BIOS will probably ignore us since
we are supposed to poll for events.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@15900 a95241bf-73f2-0310-859d-f6bbb57e9c96
