restrictions for virtual/physical addresses.
* vm_page_allocate_page_run():
- Fixed conversion of base/limit to array indexes. sPhysicalPageOffset was not
taken into account.
- Takes a physical_address_restrictions instead of base/limit and also
supports alignment and boundary restrictions, now.
* map_backing_store(), VM[User,Kernel]AddressSpace::InsertArea()/
ReserveAddressRange() take a virtual_address_restrictions parameter, now. They
also support an alignment independent from the range size.
* create_area_etc(), vm_create_anonymous_area(): Take
{virtual,physical}_address_restrictions parameters, now.
* Removed no longer needed B_PHYSICAL_BASE_ADDRESS.
* DMAResources:
- Fixed potential overflows of uint32 when initializing from device node
attributes.
- Fixed bounce buffer creation TODOs: By using create_area_etc() with the
new restrictions parameters we can directly support physical high address,
boundary, and alignment.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@37131 a95241bf-73f2-0310-859d-f6bbb57e9c96
map_physical_memory()'s physicalAddress parameter type from void* to
phys_addr_t. This breaks source compatibility, but -- as long as
phys_{addr,size}_t remain 32 bit wide -- keeps binary compatibility with
BeOS.
* Adjusted all code using the affected interfaces (Oh what fun!). Added a few
TODOs in places where the wrong types (e.g. void* for physical addresses
are used). Looks like quite a few drivers aren't 64 bit safe and others
will break with PAE.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@36960 a95241bf-73f2-0310-859d-f6bbb57e9c96
* Removed irq_routing struct from ACPI.h to where it is used. Might be able to use acrestype.h instead of duplication.
* Disable old embedded controller and remove it from image.
* Move embedded controller code to busmanager module.
* Remove (some) code duplication
Should work as before, but is now initialized right after the bus manager. Can probably remove further code duplication.
I hope I've done it correctly, feedback is most welcome.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@36420 a95241bf-73f2-0310-859d-f6bbb57e9c96
* Exposed ACPI API needed by Embedded Controller
This will be removed again if moved inside the bus manager.
It also duplicates ACPI's own headers so it might go out of sync atm.
* Added mutex to controller and fixed the mixup between acpi_status needed in int handlers and Haiku status.
* Major code cleanup
Not for headers as they are mostly redundant if we move the controller.
Variable names still needs some cleanup
This makes the ACPI errors from the controller understandable. I get AE_NO_HARDWARE_RESPONSE now.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@36318 a95241bf-73f2-0310-859d-f6bbb57e9c96
* Implement such a module for x86 which currently exports only an MSI API.
* Implement the PCI part for configuring and enabling MSIs.
* Some automatic whitespace cleanup.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@36223 a95241bf-73f2-0310-859d-f6bbb57e9c96
to avoid recurring problems during migration of subversion checkouts
(restored binary files that were garbled by subversions during checkout)
* added appropriate svn:mime-type property for problematic (binary) files
* removed a single (mistyped) svn:mimetype property
* dropped svn:eol-style property for cleanup (they all contained 'native')
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@33670 a95241bf-73f2-0310-859d-f6bbb57e9c96
documentation found in those headers - this stuff should go into the Haiku
Book instead (although I'm not even sure the USB_rle.h, and midi_driver.h
are really needed any longer).
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@32901 a95241bf-73f2-0310-859d-f6bbb57e9c96
* Rewrote PartitionMapWriter
* Updated style to match current style guide for the intel partitioning system.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@32235 a95241bf-73f2-0310-859d-f6bbb57e9c96
* Reverted r31809 as it introduced a race condition; if the I/O request had been
notified, it could already been deleted at that point.
* Instead, we need to notify the request in each file system/driver that uses
it. Added new notify_io_request() function that does that exactly.
* Added a TODO comment to the userlandfs where the request notification needs
a bit more thought.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@31903 a95241bf-73f2-0310-859d-f6bbb57e9c96
introduced earlier.
* Reworked the previous device classes to make them ProtocolHandlers handling
their respective input_server <-> driver protocol.
* Implement setting report item data and building/sending reports based on that.
* Remove the old HID parsing code.
This enables us to use all HID devices as we now parse and use the HID
descriptors/reports. Non-boot-porotocol devices should therefore work.
The next step will be to implement a generic input/output framework in userland
that can communicate with a generic protocol handler in usb_hid. This will then
enable applications to make use of all the non-mapped HID stuff directly.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@31790 a95241bf-73f2-0310-859d-f6bbb57e9c96
KPartition::CreateChild(). CreateChild() calls AddChild(), which publishes
the new partition, though at that point offset and size were not set, so that
the published devices would not be usable.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@31463 a95241bf-73f2-0310-859d-f6bbb57e9c96
- Now also use the acpi handle to call a function and not use the path to get a handle and then call the function.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@31101 a95241bf-73f2-0310-859d-f6bbb57e9c96
* Copied ide_adapter.h as ata_adapter.h in attempt to further
separate the two stacks.
* Continued renaming stuff in drivers/bus/ATA.h
* Make all the busses/ata drivers include the new headers,
specifically ata_types.h, ata_adapter.h and bus/ATA.h,
they were all including ide_types and bus/IDE.h still
* Some renaming of global variables for coding style consistency
* Removed the promise driver from the build, it's not used on the
image and I don't believe it compiled even for the old IDE stack.
* There is no more Command Queueing in the new ATA stack, so I
removed the capability indication from the busses/ata drivers
and ata_adapter.h.
The new ATA stack still boots fine on my computer and I proof-read
the diff like two times. Basically, this was a careful search&replace
job only. The only things I am not sure about is renaming some
publishing related strings, but it seems to all work fine.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@30700 a95241bf-73f2-0310-859d-f6bbb57e9c96
pointed out, there is also an unsolvable race condition with BFS that other
file systems should share.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@30204 a95241bf-73f2-0310-859d-f6bbb57e9c96
but doesn't really do anything more than before.
* It also replaces everything IDE with ATA counterparts and cleans up a lot
of the definitions.
* Cleaning up the old ATA bus_manager as well as some license headers missing.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@30049 a95241bf-73f2-0310-859d-f6bbb57e9c96
newly created dir. The VFS really doesn't need it and for some file systems
it might not be easy to get by. Several file systems (e.g. rootfs and fat)
were ignoring the parameter anyway.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@29719 a95241bf-73f2-0310-859d-f6bbb57e9c96
IORequest.{h,cpp}.
* Introduced public <io_requests.h> header. Currently it only declares the
single function BFS uses.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@29446 a95241bf-73f2-0310-859d-f6bbb57e9c96
needed at all when used as intended. Thanks Ingo for the explanation on how this
is intended to work. Adjusted the overlay fs accordingly and updated/reverted
the changes to the other filesystems.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@29250 a95241bf-73f2-0310-859d-f6bbb57e9c96
been mounted. This is to allow layered filesystems to setup internal data that
requires all the sub/super volumes to be available.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@29248 a95241bf-73f2-0310-859d-f6bbb57e9c96
It causes the interrupt handler to be inserted at the very end of the list
instead of at the top. It is intended to be used as a workaround when a
interrupt handler cannot know if it actually handled the interrupt. This
should never be used by native drivers. Also if we know that the result is
not valid because of this flag we won't disable the vector in case we count
many unhandled interrupts as those numbers are then unreliable.
* Moved B_NO_LOCK_VECTOR to be a private flag as well.
* Made the interrupt handler list a simple manually maintaned singly linked list
instead of the doubly linked one used with insque and remque as it greatly
simplifies things for such an easy use case and is more compact.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@29241 a95241bf-73f2-0310-859d-f6bbb57e9c96
* Remove the previous method of applying the overlay by flags. In the future the
overlay can just be mounted as a filesystem layer. This is probably how layers
were intended to work in the first place.
* Move the filesystem module info and filesystem name from the fs_mount to the
fs_volume structure. Filesystem layering is done by having multiple layered
volumes and we want to be able to have a different fs per layer.
* Adapt VFS code to this move.
* Implement mounting layered filesystems. Specifying multiple filesystems
separated by a colon on mount will cause the layers to be set up and the
corresponding filesystems to be mounted at that layer.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@29199 a95241bf-73f2-0310-859d-f6bbb57e9c96
node. That is needed for a layered filesystem to be able to construct a full
fs_vnode out of a volume/inode pair.
* Adapt places where get_vnode is used. Sadly this is a C API and we can't just
use a default NULL for that argument.
* Introduce a flag B_VNODE_WANTS_OVERLAY_SUB_NODE that can be returned in the
flags field of a fs get_vnode call. A filesystem can use this flag to indicate
that it doesn't support the full set of fs features (attributes, write support)
and it'd like to have unsupported calls emulated by an overlay sub node.
* Add a perliminary overlay filesystem that emulates file attributes using files
on a filesystem where attributes aren't supported. It does currently only
support reading attributes/attribute directories though. All other calls are
just passed through to the super filesystem.
* Adjust places where a HAS_FS_CALL() is taken as a guarantee that the operation
is supported. For the overlay filesystem we may later return a B_UNSUPPORTED,
so make sure that in that case proper fallback options are taken.
* Make the iso9660 filesystem request overlay sub nodes. This can be fine tuned
later to only trigger where there are features on a CD that need emulation
at all.
If you happened to know the attribute file format and location you could build
an iso with read-only attribute support now. Note that this won't be enough to
get a bootable iso-only image as the query and index support is yet missing.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@29177 a95241bf-73f2-0310-859d-f6bbb57e9c96
add the const in any case. As Axel points out these are C functions and we do
not affect binary compatibility by changing their signature.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@29124 a95241bf-73f2-0310-859d-f6bbb57e9c96
* Replaced the use of offsetof() for structs that aren't PODs. Add a
offset_of_member() macro to util/khash.h because that's what it's used for
in our cases.
* Change the signature of add_debugger_command()/remove_debugger_command() on
GCC > 2 to avoid the depricated conversion from string constants to char *.
* Adding some "suggested" parenthesis. I know that not everyone likes that, but
it pointed out at least one bug that is fixed here as well.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@29113 a95241bf-73f2-0310-859d-f6bbb57e9c96
discarding their changes. This functionality currently only works correctly
when no transactions are used.
* Started test application for the block cache, doesn't do anything yet.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@28496 a95241bf-73f2-0310-859d-f6bbb57e9c96
