* Working under qemu smp 1,2+
* Working on SiFive Unmatched
* x86_64 efi not broken by smp_boot_other_cpus change
Change-Id: I32ebc17913e46ed082be9ade8f56448bbf12f16e
Reviewed-on: https://review.haiku-os.org/c/haiku/+/4705
Tested-by: Commit checker robot <no-reply+buildbot@haiku-os.org>
Reviewed-by: Alex von Gluck IV <kallisti5@unixzen.com>
Pages in the given range are unmapped and freed without getting written
back anywhere. It can be used whenever a caller does not care about the
data in the given range anymore and wants to reduce page pressure.
Change-Id: I8bcce68fab278efef710d3714677e1d463504a56
Reviewed-on: https://review.haiku-os.org/c/haiku/+/2843
Reviewed-by: waddlesplash <waddlesplash@gmail.com>
The code in the Resize and Rebase methods was identical except for the
iterator.
Change-Id: I9f6b3c2c09af0c26778215bd627fed030c4d46f1
Reviewed-on: https://review.haiku-os.org/c/haiku/+/2835
Reviewed-by: waddlesplash <waddlesplash@gmail.com>
Rename MovePageRange to Adopt and group it with Resize/Rebase as it
covers the third, middle cut case.
Implement VMAnonymousCache::Adopt() to actually adopt swap pages. This
has to recreate swap blocks instead of taking them over from the source
cache as the cut offset or base offset between the caches may not be
swap block aligned. This means that adoption may fail due to memory
shortage in allocating the swap blocks.
For the middle cut case it is therefore now possible to have the adopt
fail in which case the previous cache restore logic is applied. Since
the readoption of the pages from the second cache can fail for the same
reason, there is a slight chance that we can't restore and lose pages.
For now, just panic in such a case and add a TODO to free memory and
retry.
Change-Id: I9a661f00c8f03bbbea2fe6dee90371c68d7951e6
Reviewed-on: https://review.haiku-os.org/c/haiku/+/2588
Reviewed-by: waddlesplash <waddlesplash@gmail.com>
* Adds VMCache::MovePageRange() and VMCache::Rebase() to facilitate
this.
Applied on top of hrev45098 and rebased with the hrev45564 page_num_t to
off_t change included.
Change-Id: Ie61bf43696783e3376fb4144ddced3781aa092ba
Reviewed-on: https://review.haiku-os.org/c/haiku/+/2581
Reviewed-by: waddlesplash <waddlesplash@gmail.com>
The base VMCache class changed to the generic_ types with their
introduction in in *2011* (435c43f591),
but these classes were never properly adapted. These functions should not
be called here (they panic() -- but the base class only returns B_ERROR,
so that is a difference at least.)
Found by Clang's -Woverloaded-virtual.
* Added the aforementioned functions.
* create_area_etc() now takes a guard size parameter.
* The thread_info::stack_base/end range now refers to the usable range
only.
* Turn VMCache::consumers C list into a DoublyLinkedList.
* Use object caches for the different VMCache types and the VMCacheRefs.
The purpose is to reduce slab area fragmentation.
* Requires the introduction of a pure virtual VMCache::DeleteObject()
method, implemented in the derived classes.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@43133 a95241bf-73f2-0310-859d-f6bbb57e9c96
the parameter (CID 5329).
* _MergeWithOnlyConsumer(): Removed the somewhat weird consumerLocked
parameter. The caller can unlock itself, if desired. Improves Unlock()
readability.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@40084 a95241bf-73f2-0310-859d-f6bbb57e9c96
vm_page::Init().
* Made vm_page::wired_count private and added accessor methods.
* Added VMCache::fWiredPagesCount (the number of wired pages the cache
contains) and accessor methods.
* Made more use of vm_page::IsMapped().
* vm_copy_on_write_area(): Added vm_page_reservation* parameter that can be
used to request a special handling for wired pages. If given the wired pages
are replaced by copies and the original pages are moved to the upper cache.
* vm_copy_area():
- We don't need to do any wired ranges handling, if the source area is a
B_SHARED_AREA, since we don't touch the area's mappings in this case.
- We no longer wait for wired ranges of the concerned areas to disappear.
Instead we use the new vm_copy_on_write_area() feature and just let it
copy the wired pages. This fixes#6288, an issue introduced with the use
of user mutexes in libroot: When executing multiple concurrent fork()s all
but the first one would wait on the fork mutex, which (being a user mutex)
would wire a page that the vm_copy_area() of the first fork() would wait
for.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@37460 a95241bf-73f2-0310-859d-f6bbb57e9c96
that are wide enough for both virtual and physical addresses.
* DMABuffer, IORequest, IOScheduler,... and code using them: Use
generic_io_vec and generic_{addr,size}_t where necessary.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@36997 a95241bf-73f2-0310-859d-f6bbb57e9c96
swap space when the cache shrinks. Currently the implementation stil leaks
swap space of busy pages.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@36373 a95241bf-73f2-0310-859d-f6bbb57e9c96
flag. The obvious advantage is that one can still see what state a page is in
and even move it between states while being marked busy.
* Removed the vm_page::is_dummy flag. Instead we mark marker pages busy, which
in all cases has the same effect. Introduced a vm_page_is_dummy() that can
still check whether a given page is a dummy page.
* vm_page_unreserve_pages(): Before adding to the system reserve make sure
sUnreservedFreePages is non-negative. Otherwise we'd make nonexisting pages
available for allocation. steal_pages() still has the same problem and it
can't be solved that easily.
* map_page(): No longer changes the page state/mark the page unbusy. That's the
caller's responsibility.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@35331 a95241bf-73f2-0310-859d-f6bbb57e9c96
argument. They replace the previous special-purpose allocation functions
(malloc_nogrow(), vip_io_request_malloc()).
* Moved the I/O VIP heap to heap.cpp accordingly.
* Added quite a bit of passing around of allocation flags in the VM,
particularly in the VM*AddressSpace classes.
* Fixed IOBuffer::GetNextVirtualVec(): It was ignoring the VIP flag and always
allocated on the normal heap.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@35316 a95241bf-73f2-0310-859d-f6bbb57e9c96
memory and page reservation functions have a new "priority" parameter that
indicates how deep the function may tap into that reserve. The currently
existing priority levels are "user", "system", and "VIP". The idea is that
user programs should never be able to cause a state that gets the kernel into
trouble due to heavy battling for memory. The "VIP" level (not really used
yet) is intended for allocations that are required to free memory eventually
(in the page writer). More levels are thinkable in the future, like "user real
time" or "user system server".
* Added "priority" parameters to several VMCache methods.
* Replaced the map_backing_store() "unmapAddressRange" parameter by a "flags"
parameter.
* Added area creation flag CREATE_AREA_PRIORITY_VIP and slab allocator flag
CACHE_PRIORITY_VIP indicating the importance of the request.
* Changed most code to pass the right priorities/flags.
These changes already significantly improve the behavior in low memory
situations. I've tested a bit with 64 MB (virtual) RAM and, while not
particularly fast and responsive, the system remains at least usable under high
memory pressure.
As a side effect the slab allocator can now be used as general memory allocator.
Not done by default yet, though.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@35295 a95241bf-73f2-0310-859d-f6bbb57e9c96
VMCacheRef object which points to the cache. This allows to optimize
VMCache::MoveAllPages(), since it no longer needs to iterate over all pages
to adjust their cache pointer. It can simple swap the cache refs of the two
caches instead.
Reduces the total -j8 Haiku image build time only marginally. The kernel time
drops almost 10%, though.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@35155 a95241bf-73f2-0310-859d-f6bbb57e9c96
* Added "bool consumerLocked" parameter to VMCache::Unlock() and
ReleaseRefAndUnlock(). Since Unlock() may cause the cache to be merged with
a consumer cache, the flag is needed to prevent a deadlock in case the
caller still holds a lock to the consumer. Hasn't been a problem yet, since
that situation never occurred.
* VMCacheChainLocker: Reversed unlocking order to bottom-up. The other
direction could cause a deadlock in case caches would be merged, since the
locking order would be reversed. The way VMCacheChainLocker was used this
didn't happen, though.
* fault_get_page(): While copying a page from a lower cache to the top cache,
we do now unlock all caches but the top one, so we don't unnecessarily
kill concurrency.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@35153 a95241bf-73f2-0310-859d-f6bbb57e9c96
* Added VMCache::MovePage() and MoveAllPages() to move pages between caches.
* VMAnonymousCache:
- _MergeSwapPages(): Avoid doing anything, if neither cache has swapped out
pages.
- _MergeSwapPages() does now also remove source cache pages that are
shadowed by consumer swap pages. This allows us to call _MergeSwapPages()
before _MergePagesSmallerSource(), save the swap page shadowing check
there and get rid of the vm_page::merge_swap flag. This is an
optimization based on the assumption that usually none or only few pages
are swapped out, so we save a lot of checks.
- Implemented _MergePagesSmallerConsumer() as an alternative to
_MergePagesSmallerSource(). The former is used when the source cache has
more pages than the consumer cache. It iterates over the consumer cache's
pages, moves them to the source and finally moves all pages back to the
consumer. The final move is relatively cheap (though unfortunately we
still have to update all pages' vm_page::cache field), so that overall we
save iterations of the main loop with the more expensive checks.
The optimizations particularly improve the common fork()+exec*() situations.
fork() uses CoW, which is implemented by putting two new empty caches between
the to be copied area and its cache. exec*() destroys one copy of the area,
its cache and thus causes merging of the other new cache with the old cache.
Since this usually happens in a very short time, the old cache does still
contain many pages and the new cache only few. Previously the many pages were
all checked and moved individually. Now we do that for the few pages instead.
A very extreme example of this situation is the Haiku image build. jam has a
huge heap (> 200 MB) and it fork()s+exec*()s for every action to be executed.
Since during the cache merging the cache is locked, any write access to a
heap page causes jam to block until the cache merging is done. Formerly that
took so long that it killed a lot of parallelism in multi-job builds. That
could be observed particularly well when lots of small actions where executed
(like the Link, XRes, Mimeset, SetType, SetVersion combos when building
executables/libraries/add-ons). Those look dramatically better now.
The overall speed improvement for a -j8 image build on my machine is only
about 15%, though.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@34784 a95241bf-73f2-0310-859d-f6bbb57e9c96
another. The code originates from vm_copy_on_write_area(). We now generate
the VM cache tracing entries, though.
* count_writable_areas() -> VMCache::CountWritableAreas()
* Added debugger command "cache_stack" which is enabled when VM cache tracing
is enabled. It prints the source caches of a given cache or area at the
time of a specified tracing entry.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@34751 a95241bf-73f2-0310-859d-f6bbb57e9c96
waits for certain events on a given page, NotifyPageEvents() wakes up
waiting threads respectively.
* Used the new feature instead of condition variables for waiting on busy
pages. We save publishing and unpublishing of a condition variable whenever
a page is marked busy. There's only something to do, if there's at least
one thread waiting in the list of the respective cache. The general
assumption is that this is only rarely the case and even if it happens,
there should be only very few threads.
* Added an apparently missing notification in cache_io(). At least I didn't
see the reason for it not being there.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@34537 a95241bf-73f2-0310-859d-f6bbb57e9c96
