* Invoking jam from Haiku's checkout directory (instead of the output
directory) caused the repository creation to fail because of relative
paths to package files being used. Now we make sure that HAIKU_TOP
is an absolute path to avoid problems like these.
* Instead of separate variables, HAIKU_BUILD_TYPE is set to one of
'bootstrap', 'minimum' or 'regular'.
* Adjust uses of HAIKU_BOOTSTRAP_BUILD accordingly.
* All packaging architecture dependent variables do now have a
respective suffix and are set up for each configured packaging
architecture, save for the kernel and boot loader variables, which
are still only set up for the primary architecture.
For convenience TARGET_PACKAGING_ARCH, TARGET_ARCH, TARGET_LIBSUPC++,
and TARGET_LIBSTDC++ are set to the respective values for the primary
packaging architecture by default.
* Introduce a set of MultiArch* rules to help with building targets for
multiple packaging architectures. Generally the respective targets are
(additionally) gristed with the packaging architecture. For libraries
the additional grist is usually omitted for the primary architecture
(e.g. libroot.so and <x86>libroot.so for x86_gcc2/x86 hybrid), so that
Jamfiles for targets built only for the primary architecture don't
need to be changed.
* Add multi-arch build support for all targets needed for the stage 1
cross devel package as well as for libbe (untested).
The goal is to do hybrid builds in a single jam (instead of calling a
sub-jam to build parts with the secondary tool chain). This changeset
adds support to configure to prepare multiple tool chains.
configure:
* Merge option --build-cross-tools-gcc4 into --build-cross-tools. The
option does now always require a packaging architecture parameter,
i.e. x86_gcc2 for the legacy tool chain.
* Multiple occurrences of the --build-cross-tools and
--cross-tools-prefix options are allowed. The first one specifies the
primary tool chain, the subsequent ones the secondary tool chains.
* All architecture dependent jam variables are now suffixed with the
name of the packaging architecture. The new HAIKU_PACKAGING_ARCHS
contains the packaging architectures for the prepared tool chains. The
first element is for the primary tool chain.
* No longer generate a separate libgccObjects file. Just put the
respective variable into BuildConfig as well.
build_cross_tools[_gcc4]:
* Replace the <haiku output dir> parameter by a <install dir>
parameter. This allows to create different cross-tools directories.
They are simply suffixed by the packaging architecture.
Jamrules:
* For the moment map the variables for the primary tool chain to the
respective suffix-less variables, so that everything still works as
before.
The next step is to actually support the secondary tool chains in the
jam build system. This will require quite a bit more butchering, though.
* Add configure option --bootstrap which allows specifying the
haikuporter and HaikuPorts repository paths.
* Add rules for supporting a second repository type. The
PackageRepository rule is now private and RemotePackageRepository is
used for remote repositories. The new BootstrapPackageRepository rule
is for defining a bootstrap repository (there will probably be only
the HaikuPorts cross repository) whose packages can be built as needed
via haikuporter.
* Rename DownloadPackage to FetchPackage.
* Define repository HaikuPortsCross.
* HaikuCrossDevel package(s): There are now two sets of packages: A
"stage1" set with the same content as before and a final set
additionally containing the libraries libbe, libnetwork, libpackage.
Those are needed for building the libsolv bootstrap package while for
building them we need other bootstrap packages (ICU, libz).
This is basically all that's required to build a bootstrap Haiku
completely from sources, with a few caveats:
* There's no ICU bootstrap recipe yet (so one has to cheat and use the
prebuilt package ATM).
* Probably doesn't work on Haiku yet (tested on Linux only).
* A 32 bit environment must be used (otherwise building the gcc 2
bootstrap package fails).
* Building with multiple jobs doesn't work yet, since haikuporter uses
common directories for building different packages and there's no
explicit serialization yet.
* Haven't tested the resulting image save for booting it. So it probably
needs a bit more work before it can actually build the final
HaikuPorts packages.
DefaultBuildProfiles is now included earlier (right after BuildSetup).
This allows us to set HAIKU_BOOTSTRAP_BUILD earlier, so it can be used
for the repository selection. The actual build profile definitions,
which cannot be done that early, live in the rule
DefineDefaultBuildProfiles, which is invoked where the file was
previously included.
The package kit actually requires the files "repo", "repo.info",
"repo.sha256" to be located under the repository base URL, so the
approach to name the repository file "repo-<hash>" doesn't work.
Now there's a directory "<hash>" which contains the files.
This commit moves the computation of the hash and downloading the
repository file from the build_haiku_image script to the jam build
system. The repo.info is also downloaded and a repository config file
is generated.
* Build libsolv and the dependency solver part of the package kit for
the build platform.
* Add build tool get_package_dependencies. Given a list of package files
and a list of repository files it determines the additional packages
that need to be retrieved from the repositories and prints their URLs.
* Add rules to work with external repositories in the build system
(build/jam/RepositoryRules):
- PackageRepository declares an external repository with all its
packages. The URL of the repository file isn't specified. It is
computed from a given base URL and the SHA256 hash of the list of
package files.
- GeneratedRepositoryPackageList generates a file containing the file
names of all packages in a repository.
- IsPackageAvailable returns whether a package is available in any
repository.
- PackageURL returns the URL for a package.
* Declare the HaikuPorts repository for x86_gcc2
(build/jam/repositories/HaikuPorts/x86_gcc2).
* Add rule AddHaikuImagePackages to add a package to the image and rule
IsHaikuImagePackageAdded to determine whether a package has been
added.
* OptionalPackages: Remove all entries that just downloaded and
installed an external package. AddHaikuImagePackages can be used
instead and is used in the remaining entries. Also move the remaining
optional package dependency declarations from
OptionalPackageDependencies here.
* ExtractBuildFeatureArchives: Instead of the URL parameter a package
name must be specified now. This allows to simplify BuildFeatures
significantly, since there's no dealing with URLs anymore. "if" out
the entries that aren't supported yet.
* build_haiku_image: For the packages installed in system and common
resolve their dependencies and download and install them as well.
* x86_64 is using the existing *_ia32 boot platforms.
* Special flags are required when compiling the loader to get GCC to compile
32-bit code. This adds a new set of rules for compiling boot code rather
than using the kernel rules, which compile using the necessary flags.
* Some x86_64 private headers have been stubbed by #include'ing the x86
versions. These will be replaced later.
* while it seemed to work before, BuildSetup was actually adding includes from the default boot platform, before BoardSetup had a chance of changing it.
are stored in signature-based subdirectories. This improves upon r37871 and
should allow BOM to properly harvest catkeys for online translation tools.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@38819 a95241bf-73f2-0310-859d-f6bbb57e9c96
* made locale build tools shut up about anything except warnings or errors
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@37723 a95241bf-73f2-0310-859d-f6bbb57e9c96
- consolidate board specific definitions into build/jam/board/*/BoardSetup to avoid duplicating address values everywhere,
- add various addresses, boot script, custom C/C++ flags and SD card definition,
- not sure BoardSetup is included at the best place though,
- replaced board-specific ldscript with passing the loader address directly to LD from BoardSetup,
- added haiku.mmc target which generates an mmc/SD card image with a FAT partition with the files needed to boot for the board, should later be integrated with haiku.image with the BFS partition offset passed to bfs_shell, requires apt:sfdisk,mtools on GNU/Linux,
- added some more rules, one to build a script for the SD image,
- fake a NetBSD loader for now, U-Boot doesn't know haiku, and we'll need a way to pass the tgz image and RAM size, we'll either use standlone way (usual C argv[]) or the NetBSD args,
- style fixes,
- 80 cols, /me pets Ingo.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@32284 a95241bf-73f2-0310-859d-f6bbb57e9c96
build/jam/OptionalPackageDependencies and include it earlier (before the
Jamfiles).
* Introduced build/jam/OptionalBuildFeatures which is supposed to do the setup
for optional build features that need it.
* Renamed USE_SSL to HAIKU_BUILD_FEATURE_SSL and made it more intelligent.
The OpenSSL optional package is downloaded and unzipped automatically when
enabled. Switching between enabled/disabled HAIKU_BUILD_FEATURE_SSL is
handled gracefully -- the concerned components are built in separate
subdirectories. Adding the OpenSSL optional package to the image also enables
HAIKU_BUILD_FEATURE_SSL.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@30021 a95241bf-73f2-0310-859d-f6bbb57e9c96
* Check the first argument for "help" as well. If given print a somewhat
helpful text. Consider this my excuse to close ticket #1883. :-)
* Track available and added optional packages and fail, if an optional package
is requested that doesn't exist. Closes ticket #3332.
* Check for duplicate build profile definitions and fail if encountered.
Closes ticket #3333.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@29298 a95241bf-73f2-0310-859d-f6bbb57e9c96
clean yet. Provides a haiku-cd target and creates a bootable image using mkisofs.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@29203 a95241bf-73f2-0310-859d-f6bbb57e9c96
generated). When not using build profiles this allows for separate configuration
per output directory. When using build profiles you could for example have a
different profile per output directory with the same name (so an @disk with
different settings per output dir for example).
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@29161 a95241bf-73f2-0310-859d-f6bbb57e9c96
UserBuildConfigRulePreImage, and UserBuildConfigRulePostImage which will be
invoked at different points in the build system execution. They can be
overridden in UserBuildConfig, thus allowing for executing user code at
those points.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@28765 a95241bf-73f2-0310-859d-f6bbb57e9c96
the wrong Link actions were used (always the no-attributes-support ones
which remove the target first), for instance.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@28304 a95241bf-73f2-0310-859d-f6bbb57e9c96
Especially people building various kinds of images with different
settings may want to have a look at the respective section in the
UserBuildConfig.ReadMe.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@24757 a95241bf-73f2-0310-859d-f6bbb57e9c96
HaikuImage and enabled individually using the
AddOptionalHaikuImagePackages rule or all at once by setting
HAIKU_ADD_ALL_OPTIONAL_PACKAGES. In principle an optional package can
be any kind of addition to the Haiku image, but usually a zip file will
be downloaded from somewhere and unzipped onto the image. I've added a
WonderBrush package as an example.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@22184 a95241bf-73f2-0310-859d-f6bbb57e9c96
relevant for the image creation.
* The CopySetHaikuRevision propagates the value of the
HAIKU_INCLUDE_IN_IMAGE variable from the source to the target.
* Propagate the value of HAIKU_INCLUDE_IN_IMAGE from "kernel" to
"kernel_$(TARGET_ARCH)".
Now "jam update-install kernel" should work as expected.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@21527 a95241bf-73f2-0310-859d-f6bbb57e9c96
operate manually on digit lists, so they are certainly not fast and shouldn't
be used excessively, but at least it's possible to do calculations in Jam now,
should the need arise.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@20596 a95241bf-73f2-0310-859d-f6bbb57e9c96
avoid all dependencies on libraries (that have been specified with
LinkSharedOSLibs or a rule that uses it).
This means you can now run a
NO_LIBRARY_DEPENDENCIES=1 jam MyApp
to build MyApp without updating any library MyApp depends on, even if they
have changed. This is a feature for people who know what they are doing to
speed up development.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@13483 a95241bf-73f2-0310-859d-f6bbb57e9c96
StaticLibraryFromObjects is a copy-paste of LibraryFromObjects without grist on source files
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@13199 a95241bf-73f2-0310-859d-f6bbb57e9c96
StaticLibrary now accepts static libraries to include (note that jam should be rebuilt)
LibraryFromObjects doesn't FGristFiles now, but Library does
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@13119 a95241bf-73f2-0310-859d-f6bbb57e9c96
- removed libnetapi.so from $NETWORK_LIBS - it's not used by anyone anyway,
and it's definitely not necessary to link against it by default.
Note, this might cause problems in some of the mail add-ons; I haven't
tested this.
- route/ping/... now also link against $SELECT_UNAME_ETC_LIB
makehdimage should now work again under all BeOS platforms.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@12325 a95241bf-73f2-0310-859d-f6bbb57e9c96
for building under Linux.
* Tried to get the header setup into a shape that would allow us to build
under Linux with gcc 3.x. But I give up for the moment. The C++ support
headers don't seem to be separate from the STL headers, which makes it
virtually impossible to use our STL together with gcc 3.x.
Worse, I don't even think, how we build under BeOS at the moment is
correct. The _G_config.h (glibc configuration) header is included from
some public headers, but is itself not made available. This causes the
R5 header to be used, which belongs to a completely different glibc
version. But when building our libroot we use the new header. I wouldn't
be surprised, if that could cause all kinds of subtle problems. Maybe
even the STL string problem I encountered recently.
git-svn-id: file:///srv/svn/repos/haiku/trunk/current@11607 a95241bf-73f2-0310-859d-f6bbb57e9c96
