diff --git a/src/add-ons/kernel/drivers/network/vt612x/dev/vge/if_vge.c b/src/add-ons/kernel/drivers/network/vt612x/dev/vge/if_vge.c new file mode 100644 index 0000000000..f08f8a267f --- /dev/null +++ b/src/add-ons/kernel/drivers/network/vt612x/dev/vge/if_vge.c @@ -0,0 +1,2389 @@ +/*- + * Copyright (c) 2004 + * Bill Paul . All rights reserved. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions + * are met: + * 1. Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * 2. Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in the + * documentation and/or other materials provided with the distribution. + * 3. All advertising materials mentioning features or use of this software + * must display the following acknowledgement: + * This product includes software developed by Bill Paul. + * 4. Neither the name of the author nor the names of any co-contributors + * may be used to endorse or promote products derived from this software + * without specific prior written permission. + * + * THIS SOFTWARE IS PROVIDED BY Bill Paul AND CONTRIBUTORS ``AS IS'' AND + * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE + * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE + * ARE DISCLAIMED. IN NO EVENT SHALL Bill Paul OR THE VOICES IN HIS HEAD + * BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR + * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF + * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS + * INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN + * CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) + * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF + * THE POSSIBILITY OF SUCH DAMAGE. + */ + +#include +__FBSDID("$FreeBSD$"); + +/* + * VIA Networking Technologies VT612x PCI gigabit ethernet NIC driver. + * + * Written by Bill Paul + * Senior Networking Software Engineer + * Wind River Systems + */ + +/* + * The VIA Networking VT6122 is a 32bit, 33/66Mhz PCI device that + * combines a tri-speed ethernet MAC and PHY, with the following + * features: + * + * o Jumbo frame support up to 16K + * o Transmit and receive flow control + * o IPv4 checksum offload + * o VLAN tag insertion and stripping + * o TCP large send + * o 64-bit multicast hash table filter + * o 64 entry CAM filter + * o 16K RX FIFO and 48K TX FIFO memory + * o Interrupt moderation + * + * The VT6122 supports up to four transmit DMA queues. The descriptors + * in the transmit ring can address up to 7 data fragments; frames which + * span more than 7 data buffers must be coalesced, but in general the + * BSD TCP/IP stack rarely generates frames more than 2 or 3 fragments + * long. The receive descriptors address only a single buffer. + * + * There are two peculiar design issues with the VT6122. One is that + * receive data buffers must be aligned on a 32-bit boundary. This is + * not a problem where the VT6122 is used as a LOM device in x86-based + * systems, but on architectures that generate unaligned access traps, we + * have to do some copying. + * + * The other issue has to do with the way 64-bit addresses are handled. + * The DMA descriptors only allow you to specify 48 bits of addressing + * information. The remaining 16 bits are specified using one of the + * I/O registers. If you only have a 32-bit system, then this isn't + * an issue, but if you have a 64-bit system and more than 4GB of + * memory, you must have to make sure your network data buffers reside + * in the same 48-bit 'segment.' + * + * Special thanks to Ryan Fu at VIA Networking for providing documentation + * and sample NICs for testing. + */ + +#ifdef HAVE_KERNEL_OPTION_HEADERS +#include "opt_device_polling.h" +#endif + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#include +#include +#include +#include +#include +#include +#include + +#include + +#include +#include +#include +#include + +#include +#include + +#include +#include + +MODULE_DEPEND(vge, pci, 1, 1, 1); +MODULE_DEPEND(vge, ether, 1, 1, 1); +MODULE_DEPEND(vge, miibus, 1, 1, 1); + +/* "device miibus" required. See GENERIC if you get errors here. */ +#include "miibus_if.h" + +#include +#include + +#define VGE_CSUM_FEATURES (CSUM_IP | CSUM_TCP | CSUM_UDP) + +/* + * Various supported device vendors/types and their names. + */ +static struct vge_type vge_devs[] = { + { VIA_VENDORID, VIA_DEVICEID_61XX, + "VIA Networking Gigabit Ethernet" }, + { 0, 0, NULL } +}; + +static int vge_probe (device_t); +static int vge_attach (device_t); +static int vge_detach (device_t); + +static int vge_encap (struct vge_softc *, struct mbuf *, int); + +static void vge_dma_map_addr (void *, bus_dma_segment_t *, int, int); +static void vge_dma_map_rx_desc (void *, bus_dma_segment_t *, int, + bus_size_t, int); +static void vge_dma_map_tx_desc (void *, bus_dma_segment_t *, int, + bus_size_t, int); +static int vge_allocmem (device_t, struct vge_softc *); +static int vge_newbuf (struct vge_softc *, int, struct mbuf *); +static int vge_rx_list_init (struct vge_softc *); +static int vge_tx_list_init (struct vge_softc *); +#ifdef VGE_FIXUP_RX +static __inline void vge_fixup_rx + (struct mbuf *); +#endif +static int vge_rxeof (struct vge_softc *); +static void vge_txeof (struct vge_softc *); +static void vge_intr (void *); +static void vge_tick (void *); +static void vge_tx_task (void *, int); +static void vge_start (struct ifnet *); +static int vge_ioctl (struct ifnet *, u_long, caddr_t); +static void vge_init (void *); +static void vge_stop (struct vge_softc *); +static void vge_watchdog (struct ifnet *); +static int vge_suspend (device_t); +static int vge_resume (device_t); +static int vge_shutdown (device_t); +static int vge_ifmedia_upd (struct ifnet *); +static void vge_ifmedia_sts (struct ifnet *, struct ifmediareq *); + +#ifdef VGE_EEPROM +static void vge_eeprom_getword (struct vge_softc *, int, u_int16_t *); +#endif +static void vge_read_eeprom (struct vge_softc *, caddr_t, int, int, int); + +static void vge_miipoll_start (struct vge_softc *); +static void vge_miipoll_stop (struct vge_softc *); +static int vge_miibus_readreg (device_t, int, int); +static int vge_miibus_writereg (device_t, int, int, int); +static void vge_miibus_statchg (device_t); + +static void vge_cam_clear (struct vge_softc *); +static int vge_cam_set (struct vge_softc *, uint8_t *); +static void vge_setmulti (struct vge_softc *); +static void vge_reset (struct vge_softc *); + +#define VGE_PCI_LOIO 0x10 +#define VGE_PCI_LOMEM 0x14 + +static device_method_t vge_methods[] = { + /* Device interface */ + DEVMETHOD(device_probe, vge_probe), + DEVMETHOD(device_attach, vge_attach), + DEVMETHOD(device_detach, vge_detach), + DEVMETHOD(device_suspend, vge_suspend), + DEVMETHOD(device_resume, vge_resume), + DEVMETHOD(device_shutdown, vge_shutdown), + + /* bus interface */ + DEVMETHOD(bus_print_child, bus_generic_print_child), + DEVMETHOD(bus_driver_added, bus_generic_driver_added), + + /* MII interface */ + DEVMETHOD(miibus_readreg, vge_miibus_readreg), + DEVMETHOD(miibus_writereg, vge_miibus_writereg), + DEVMETHOD(miibus_statchg, vge_miibus_statchg), + + { 0, 0 } +}; + +static driver_t vge_driver = { + "vge", + vge_methods, + sizeof(struct vge_softc) +}; + +static devclass_t vge_devclass; + +DRIVER_MODULE(vge, pci, vge_driver, vge_devclass, 0, 0); +DRIVER_MODULE(miibus, vge, miibus_driver, miibus_devclass, 0, 0); + +#ifdef VGE_EEPROM +/* + * Read a word of data stored in the EEPROM at address 'addr.' + */ +static void +vge_eeprom_getword(sc, addr, dest) + struct vge_softc *sc; + int addr; + u_int16_t *dest; +{ + register int i; + u_int16_t word = 0; + + /* + * Enter EEPROM embedded programming mode. In order to + * access the EEPROM at all, we first have to set the + * EELOAD bit in the CHIPCFG2 register. + */ + CSR_SETBIT_1(sc, VGE_CHIPCFG2, VGE_CHIPCFG2_EELOAD); + CSR_SETBIT_1(sc, VGE_EECSR, VGE_EECSR_EMBP/*|VGE_EECSR_ECS*/); + + /* Select the address of the word we want to read */ + CSR_WRITE_1(sc, VGE_EEADDR, addr); + + /* Issue read command */ + CSR_SETBIT_1(sc, VGE_EECMD, VGE_EECMD_ERD); + + /* Wait for the done bit to be set. */ + for (i = 0; i < VGE_TIMEOUT; i++) { + if (CSR_READ_1(sc, VGE_EECMD) & VGE_EECMD_EDONE) + break; + } + + if (i == VGE_TIMEOUT) { + device_printf(sc->vge_dev, "EEPROM read timed out\n"); + *dest = 0; + return; + } + + /* Read the result */ + word = CSR_READ_2(sc, VGE_EERDDAT); + + /* Turn off EEPROM access mode. */ + CSR_CLRBIT_1(sc, VGE_EECSR, VGE_EECSR_EMBP/*|VGE_EECSR_ECS*/); + CSR_CLRBIT_1(sc, VGE_CHIPCFG2, VGE_CHIPCFG2_EELOAD); + + *dest = word; + + return; +} +#endif + +/* + * Read a sequence of words from the EEPROM. + */ +static void +vge_read_eeprom(sc, dest, off, cnt, swap) + struct vge_softc *sc; + caddr_t dest; + int off; + int cnt; + int swap; +{ + int i; +#ifdef VGE_EEPROM + u_int16_t word = 0, *ptr; + + for (i = 0; i < cnt; i++) { + vge_eeprom_getword(sc, off + i, &word); + ptr = (u_int16_t *)(dest + (i * 2)); + if (swap) + *ptr = ntohs(word); + else + *ptr = word; + } +#else + for (i = 0; i < ETHER_ADDR_LEN; i++) + dest[i] = CSR_READ_1(sc, VGE_PAR0 + i); +#endif +} + +static void +vge_miipoll_stop(sc) + struct vge_softc *sc; +{ + int i; + + CSR_WRITE_1(sc, VGE_MIICMD, 0); + + for (i = 0; i < VGE_TIMEOUT; i++) { + DELAY(1); + if (CSR_READ_1(sc, VGE_MIISTS) & VGE_MIISTS_IIDL) + break; + } + + if (i == VGE_TIMEOUT) + device_printf(sc->vge_dev, "failed to idle MII autopoll\n"); + + return; +} + +static void +vge_miipoll_start(sc) + struct vge_softc *sc; +{ + int i; + + /* First, make sure we're idle. */ + + CSR_WRITE_1(sc, VGE_MIICMD, 0); + CSR_WRITE_1(sc, VGE_MIIADDR, VGE_MIIADDR_SWMPL); + + for (i = 0; i < VGE_TIMEOUT; i++) { + DELAY(1); + if (CSR_READ_1(sc, VGE_MIISTS) & VGE_MIISTS_IIDL) + break; + } + + if (i == VGE_TIMEOUT) { + device_printf(sc->vge_dev, "failed to idle MII autopoll\n"); + return; + } + + /* Now enable auto poll mode. */ + + CSR_WRITE_1(sc, VGE_MIICMD, VGE_MIICMD_MAUTO); + + /* And make sure it started. */ + + for (i = 0; i < VGE_TIMEOUT; i++) { + DELAY(1); + if ((CSR_READ_1(sc, VGE_MIISTS) & VGE_MIISTS_IIDL) == 0) + break; + } + + if (i == VGE_TIMEOUT) + device_printf(sc->vge_dev, "failed to start MII autopoll\n"); + + return; +} + +static int +vge_miibus_readreg(dev, phy, reg) + device_t dev; + int phy, reg; +{ + struct vge_softc *sc; + int i; + u_int16_t rval = 0; + + sc = device_get_softc(dev); + + if (phy != (CSR_READ_1(sc, VGE_MIICFG) & 0x1F)) + return(0); + + VGE_LOCK(sc); + vge_miipoll_stop(sc); + + /* Specify the register we want to read. */ + CSR_WRITE_1(sc, VGE_MIIADDR, reg); + + /* Issue read command. */ + CSR_SETBIT_1(sc, VGE_MIICMD, VGE_MIICMD_RCMD); + + /* Wait for the read command bit to self-clear. */ + for (i = 0; i < VGE_TIMEOUT; i++) { + DELAY(1); + if ((CSR_READ_1(sc, VGE_MIICMD) & VGE_MIICMD_RCMD) == 0) + break; + } + + if (i == VGE_TIMEOUT) + device_printf(sc->vge_dev, "MII read timed out\n"); + else + rval = CSR_READ_2(sc, VGE_MIIDATA); + + vge_miipoll_start(sc); + VGE_UNLOCK(sc); + + return (rval); +} + +static int +vge_miibus_writereg(dev, phy, reg, data) + device_t dev; + int phy, reg, data; +{ + struct vge_softc *sc; + int i, rval = 0; + + sc = device_get_softc(dev); + + if (phy != (CSR_READ_1(sc, VGE_MIICFG) & 0x1F)) + return(0); + + VGE_LOCK(sc); + vge_miipoll_stop(sc); + + /* Specify the register we want to write. */ + CSR_WRITE_1(sc, VGE_MIIADDR, reg); + + /* Specify the data we want to write. */ + CSR_WRITE_2(sc, VGE_MIIDATA, data); + + /* Issue write command. */ + CSR_SETBIT_1(sc, VGE_MIICMD, VGE_MIICMD_WCMD); + + /* Wait for the write command bit to self-clear. */ + for (i = 0; i < VGE_TIMEOUT; i++) { + DELAY(1); + if ((CSR_READ_1(sc, VGE_MIICMD) & VGE_MIICMD_WCMD) == 0) + break; + } + + if (i == VGE_TIMEOUT) { + device_printf(sc->vge_dev, "MII write timed out\n"); + rval = EIO; + } + + vge_miipoll_start(sc); + VGE_UNLOCK(sc); + + return (rval); +} + +static void +vge_cam_clear(sc) + struct vge_softc *sc; +{ + int i; + + /* + * Turn off all the mask bits. This tells the chip + * that none of the entries in the CAM filter are valid. + * desired entries will be enabled as we fill the filter in. + */ + + CSR_CLRBIT_1(sc, VGE_CAMCTL, VGE_CAMCTL_PAGESEL); + CSR_SETBIT_1(sc, VGE_CAMCTL, VGE_PAGESEL_CAMMASK); + CSR_WRITE_1(sc, VGE_CAMADDR, VGE_CAMADDR_ENABLE); + for (i = 0; i < 8; i++) + CSR_WRITE_1(sc, VGE_CAM0 + i, 0); + + /* Clear the VLAN filter too. */ + + CSR_WRITE_1(sc, VGE_CAMADDR, VGE_CAMADDR_ENABLE|VGE_CAMADDR_AVSEL|0); + for (i = 0; i < 8; i++) + CSR_WRITE_1(sc, VGE_CAM0 + i, 0); + + CSR_WRITE_1(sc, VGE_CAMADDR, 0); + CSR_CLRBIT_1(sc, VGE_CAMCTL, VGE_CAMCTL_PAGESEL); + CSR_SETBIT_1(sc, VGE_CAMCTL, VGE_PAGESEL_MAR); + + sc->vge_camidx = 0; + + return; +} + +static int +vge_cam_set(sc, addr) + struct vge_softc *sc; + uint8_t *addr; +{ + int i, error = 0; + + if (sc->vge_camidx == VGE_CAM_MAXADDRS) + return(ENOSPC); + + /* Select the CAM data page. */ + CSR_CLRBIT_1(sc, VGE_CAMCTL, VGE_CAMCTL_PAGESEL); + CSR_SETBIT_1(sc, VGE_CAMCTL, VGE_PAGESEL_CAMDATA); + + /* Set the filter entry we want to update and enable writing. */ + CSR_WRITE_1(sc, VGE_CAMADDR, VGE_CAMADDR_ENABLE|sc->vge_camidx); + + /* Write the address to the CAM registers */ + for (i = 0; i < ETHER_ADDR_LEN; i++) + CSR_WRITE_1(sc, VGE_CAM0 + i, addr[i]); + + /* Issue a write command. */ + CSR_SETBIT_1(sc, VGE_CAMCTL, VGE_CAMCTL_WRITE); + + /* Wake for it to clear. */ + for (i = 0; i < VGE_TIMEOUT; i++) { + DELAY(1); + if ((CSR_READ_1(sc, VGE_CAMCTL) & VGE_CAMCTL_WRITE) == 0) + break; + } + + if (i == VGE_TIMEOUT) { + device_printf(sc->vge_dev, "setting CAM filter failed\n"); + error = EIO; + goto fail; + } + + /* Select the CAM mask page. */ + CSR_CLRBIT_1(sc, VGE_CAMCTL, VGE_CAMCTL_PAGESEL); + CSR_SETBIT_1(sc, VGE_CAMCTL, VGE_PAGESEL_CAMMASK); + + /* Set the mask bit that enables this filter. */ + CSR_SETBIT_1(sc, VGE_CAM0 + (sc->vge_camidx/8), + 1<<(sc->vge_camidx & 7)); + + sc->vge_camidx++; + +fail: + /* Turn off access to CAM. */ + CSR_WRITE_1(sc, VGE_CAMADDR, 0); + CSR_CLRBIT_1(sc, VGE_CAMCTL, VGE_CAMCTL_PAGESEL); + CSR_SETBIT_1(sc, VGE_CAMCTL, VGE_PAGESEL_MAR); + + return (error); +} + +/* + * Program the multicast filter. We use the 64-entry CAM filter + * for perfect filtering. If there's more than 64 multicast addresses, + * we use the hash filter insted. + */ +static void +vge_setmulti(sc) + struct vge_softc *sc; +{ + struct ifnet *ifp; + int error = 0/*, h = 0*/; + struct ifmultiaddr *ifma; + u_int32_t h, hashes[2] = { 0, 0 }; + + ifp = sc->vge_ifp; + + /* First, zot all the multicast entries. */ + vge_cam_clear(sc); + CSR_WRITE_4(sc, VGE_MAR0, 0); + CSR_WRITE_4(sc, VGE_MAR1, 0); + + /* + * If the user wants allmulti or promisc mode, enable reception + * of all multicast frames. + */ + if (ifp->if_flags & IFF_ALLMULTI || ifp->if_flags & IFF_PROMISC) { + CSR_WRITE_4(sc, VGE_MAR0, 0xFFFFFFFF); + CSR_WRITE_4(sc, VGE_MAR1, 0xFFFFFFFF); + return; + } + + /* Now program new ones */ + if_maddr_rlock(ifp); + TAILQ_FOREACH(ifma, &ifp->if_multiaddrs, ifma_link) { + if (ifma->ifma_addr->sa_family != AF_LINK) + continue; + error = vge_cam_set(sc, + LLADDR((struct sockaddr_dl *)ifma->ifma_addr)); + if (error) + break; + } + + /* If there were too many addresses, use the hash filter. */ + if (error) { + vge_cam_clear(sc); + + TAILQ_FOREACH(ifma, &ifp->if_multiaddrs, ifma_link) { + if (ifma->ifma_addr->sa_family != AF_LINK) + continue; + h = ether_crc32_be(LLADDR((struct sockaddr_dl *) + ifma->ifma_addr), ETHER_ADDR_LEN) >> 26; + if (h < 32) + hashes[0] |= (1 << h); + else + hashes[1] |= (1 << (h - 32)); + } + + CSR_WRITE_4(sc, VGE_MAR0, hashes[0]); + CSR_WRITE_4(sc, VGE_MAR1, hashes[1]); + } + if_maddr_runlock(ifp); + + return; +} + +static void +vge_reset(sc) + struct vge_softc *sc; +{ + register int i; + + CSR_WRITE_1(sc, VGE_CRS1, VGE_CR1_SOFTRESET); + + for (i = 0; i < VGE_TIMEOUT; i++) { + DELAY(5); + if ((CSR_READ_1(sc, VGE_CRS1) & VGE_CR1_SOFTRESET) == 0) + break; + } + + if (i == VGE_TIMEOUT) { + device_printf(sc->vge_dev, "soft reset timed out"); + CSR_WRITE_1(sc, VGE_CRS3, VGE_CR3_STOP_FORCE); + DELAY(2000); + } + + DELAY(5000); + + CSR_SETBIT_1(sc, VGE_EECSR, VGE_EECSR_RELOAD); + + for (i = 0; i < VGE_TIMEOUT; i++) { + DELAY(5); + if ((CSR_READ_1(sc, VGE_EECSR) & VGE_EECSR_RELOAD) == 0) + break; + } + + if (i == VGE_TIMEOUT) { + device_printf(sc->vge_dev, "EEPROM reload timed out\n"); + return; + } + + CSR_CLRBIT_1(sc, VGE_CHIPCFG0, VGE_CHIPCFG0_PACPI); + + return; +} + +/* + * Probe for a VIA gigabit chip. Check the PCI vendor and device + * IDs against our list and return a device name if we find a match. + */ +static int +vge_probe(dev) + device_t dev; +{ + struct vge_type *t; + + t = vge_devs; + + while (t->vge_name != NULL) { + if ((pci_get_vendor(dev) == t->vge_vid) && + (pci_get_device(dev) == t->vge_did)) { + device_set_desc(dev, t->vge_name); + return (BUS_PROBE_DEFAULT); + } + t++; + } + + return (ENXIO); +} + +static void +vge_dma_map_rx_desc(arg, segs, nseg, mapsize, error) + void *arg; + bus_dma_segment_t *segs; + int nseg; + bus_size_t mapsize; + int error; +{ + + struct vge_dmaload_arg *ctx; + struct vge_rx_desc *d = NULL; + + if (error) + return; + + ctx = arg; + + /* Signal error to caller if there's too many segments */ + if (nseg > ctx->vge_maxsegs) { + ctx->vge_maxsegs = 0; + return; + } + + /* + * Map the segment array into descriptors. + */ + + d = &ctx->sc->vge_ldata.vge_rx_list[ctx->vge_idx]; + + /* If this descriptor is still owned by the chip, bail. */ + + if (le32toh(d->vge_sts) & VGE_RDSTS_OWN) { + device_printf(ctx->sc->vge_dev, + "tried to map busy descriptor\n"); + ctx->vge_maxsegs = 0; + return; + } + + d->vge_buflen = htole16(VGE_BUFLEN(segs[0].ds_len) | VGE_RXDESC_I); + d->vge_addrlo = htole32(VGE_ADDR_LO(segs[0].ds_addr)); + d->vge_addrhi = htole16(VGE_ADDR_HI(segs[0].ds_addr) & 0xFFFF); + d->vge_sts = 0; + d->vge_ctl = 0; + + ctx->vge_maxsegs = 1; + + return; +} + +static void +vge_dma_map_tx_desc(arg, segs, nseg, mapsize, error) + void *arg; + bus_dma_segment_t *segs; + int nseg; + bus_size_t mapsize; + int error; +{ + struct vge_dmaload_arg *ctx; + struct vge_tx_desc *d = NULL; + struct vge_tx_frag *f; + int i = 0; + + if (error) + return; + + ctx = arg; + + /* Signal error to caller if there's too many segments */ + if (nseg > ctx->vge_maxsegs) { + ctx->vge_maxsegs = 0; + return; + } + + /* Map the segment array into descriptors. */ + + d = &ctx->sc->vge_ldata.vge_tx_list[ctx->vge_idx]; + + /* If this descriptor is still owned by the chip, bail. */ + + if (le32toh(d->vge_sts) & VGE_TDSTS_OWN) { + ctx->vge_maxsegs = 0; + return; + } + + for (i = 0; i < nseg; i++) { + f = &d->vge_frag[i]; + f->vge_buflen = htole16(VGE_BUFLEN(segs[i].ds_len)); + f->vge_addrlo = htole32(VGE_ADDR_LO(segs[i].ds_addr)); + f->vge_addrhi = htole16(VGE_ADDR_HI(segs[i].ds_addr) & 0xFFFF); + } + + /* Argh. This chip does not autopad short frames */ + + if (ctx->vge_m0->m_pkthdr.len < VGE_MIN_FRAMELEN) { + f = &d->vge_frag[i]; + f->vge_buflen = htole16(VGE_BUFLEN(VGE_MIN_FRAMELEN - + ctx->vge_m0->m_pkthdr.len)); + f->vge_addrlo = htole32(VGE_ADDR_LO(segs[0].ds_addr)); + f->vge_addrhi = htole16(VGE_ADDR_HI(segs[0].ds_addr) & 0xFFFF); + ctx->vge_m0->m_pkthdr.len = VGE_MIN_FRAMELEN; + i++; + } + + /* + * When telling the chip how many segments there are, we + * must use nsegs + 1 instead of just nsegs. Darned if I + * know why. + */ + i++; + + d->vge_sts = ctx->vge_m0->m_pkthdr.len << 16; + d->vge_ctl = ctx->vge_flags|(i << 28)|VGE_TD_LS_NORM; + + if (ctx->vge_m0->m_pkthdr.len > ETHERMTU + ETHER_HDR_LEN) + d->vge_ctl |= VGE_TDCTL_JUMBO; + + ctx->vge_maxsegs = nseg; + + return; +} + +/* + * Map a single buffer address. + */ + +static void +vge_dma_map_addr(arg, segs, nseg, error) + void *arg; + bus_dma_segment_t *segs; + int nseg; + int error; +{ + bus_addr_t *addr; + + if (error) + return; + + KASSERT(nseg == 1, ("too many DMA segments, %d should be 1", nseg)); + addr = arg; + *addr = segs->ds_addr; + + return; +} + +static int +vge_allocmem(dev, sc) + device_t dev; + struct vge_softc *sc; +{ + int error; + int nseg; + int i; + + /* + * Allocate map for RX mbufs. + */ + nseg = 32; + error = bus_dma_tag_create(sc->vge_parent_tag, ETHER_ALIGN, 0, + BUS_SPACE_MAXADDR_32BIT, BUS_SPACE_MAXADDR, NULL, + NULL, MCLBYTES * nseg, nseg, MCLBYTES, BUS_DMA_ALLOCNOW, + NULL, NULL, &sc->vge_ldata.vge_mtag); + if (error) { + device_printf(dev, "could not allocate dma tag\n"); + return (ENOMEM); + } + + /* + * Allocate map for TX descriptor list. + */ + error = bus_dma_tag_create(sc->vge_parent_tag, VGE_RING_ALIGN, + 0, BUS_SPACE_MAXADDR_32BIT, BUS_SPACE_MAXADDR, NULL, + NULL, VGE_TX_LIST_SZ, 1, VGE_TX_LIST_SZ, BUS_DMA_ALLOCNOW, + NULL, NULL, &sc->vge_ldata.vge_tx_list_tag); + if (error) { + device_printf(dev, "could not allocate dma tag\n"); + return (ENOMEM); + } + + /* Allocate DMA'able memory for the TX ring */ + + error = bus_dmamem_alloc(sc->vge_ldata.vge_tx_list_tag, + (void **)&sc->vge_ldata.vge_tx_list, BUS_DMA_NOWAIT | BUS_DMA_ZERO, + &sc->vge_ldata.vge_tx_list_map); + if (error) + return (ENOMEM); + + /* Load the map for the TX ring. */ + + error = bus_dmamap_load(sc->vge_ldata.vge_tx_list_tag, + sc->vge_ldata.vge_tx_list_map, sc->vge_ldata.vge_tx_list, + VGE_TX_LIST_SZ, vge_dma_map_addr, + &sc->vge_ldata.vge_tx_list_addr, BUS_DMA_NOWAIT); + + /* Create DMA maps for TX buffers */ + + for (i = 0; i < VGE_TX_DESC_CNT; i++) { + error = bus_dmamap_create(sc->vge_ldata.vge_mtag, 0, + &sc->vge_ldata.vge_tx_dmamap[i]); + if (error) { + device_printf(dev, "can't create DMA map for TX\n"); + return (ENOMEM); + } + } + + /* + * Allocate map for RX descriptor list. + */ + error = bus_dma_tag_create(sc->vge_parent_tag, VGE_RING_ALIGN, + 0, BUS_SPACE_MAXADDR_32BIT, BUS_SPACE_MAXADDR, NULL, + NULL, VGE_TX_LIST_SZ, 1, VGE_TX_LIST_SZ, BUS_DMA_ALLOCNOW, + NULL, NULL, &sc->vge_ldata.vge_rx_list_tag); + if (error) { + device_printf(dev, "could not allocate dma tag\n"); + return (ENOMEM); + } + + /* Allocate DMA'able memory for the RX ring */ + + error = bus_dmamem_alloc(sc->vge_ldata.vge_rx_list_tag, + (void **)&sc->vge_ldata.vge_rx_list, BUS_DMA_NOWAIT | BUS_DMA_ZERO, + &sc->vge_ldata.vge_rx_list_map); + if (error) + return (ENOMEM); + + /* Load the map for the RX ring. */ + + error = bus_dmamap_load(sc->vge_ldata.vge_rx_list_tag, + sc->vge_ldata.vge_rx_list_map, sc->vge_ldata.vge_rx_list, + VGE_TX_LIST_SZ, vge_dma_map_addr, + &sc->vge_ldata.vge_rx_list_addr, BUS_DMA_NOWAIT); + + /* Create DMA maps for RX buffers */ + + for (i = 0; i < VGE_RX_DESC_CNT; i++) { + error = bus_dmamap_create(sc->vge_ldata.vge_mtag, 0, + &sc->vge_ldata.vge_rx_dmamap[i]); + if (error) { + device_printf(dev, "can't create DMA map for RX\n"); + return (ENOMEM); + } + } + + return (0); +} + +/* + * Attach the interface. Allocate softc structures, do ifmedia + * setup and ethernet/BPF attach. + */ +static int +vge_attach(dev) + device_t dev; +{ + u_char eaddr[ETHER_ADDR_LEN]; + struct vge_softc *sc; + struct ifnet *ifp; + int unit, error = 0, rid; + + sc = device_get_softc(dev); + unit = device_get_unit(dev); + sc->vge_dev = dev; + + mtx_init(&sc->vge_mtx, device_get_nameunit(dev), MTX_NETWORK_LOCK, + MTX_DEF | MTX_RECURSE); + /* + * Map control/status registers. + */ + pci_enable_busmaster(dev); + + rid = VGE_PCI_LOMEM; + sc->vge_res = bus_alloc_resource(dev, SYS_RES_MEMORY, &rid, + 0, ~0, 1, RF_ACTIVE); + + if (sc->vge_res == NULL) { + printf ("vge%d: couldn't map ports/memory\n", unit); + error = ENXIO; + goto fail; + } + + sc->vge_btag = rman_get_bustag(sc->vge_res); + sc->vge_bhandle = rman_get_bushandle(sc->vge_res); + + /* Allocate interrupt */ + rid = 0; + sc->vge_irq = bus_alloc_resource(dev, SYS_RES_IRQ, &rid, + 0, ~0, 1, RF_SHAREABLE | RF_ACTIVE); + + if (sc->vge_irq == NULL) { + printf("vge%d: couldn't map interrupt\n", unit); + error = ENXIO; + goto fail; + } + + /* Reset the adapter. */ + vge_reset(sc); + + /* + * Get station address from the EEPROM. + */ + vge_read_eeprom(sc, (caddr_t)eaddr, VGE_EE_EADDR, 3, 0); + + sc->vge_unit = unit; + + /* + * Allocate the parent bus DMA tag appropriate for PCI. + */ +#define VGE_NSEG_NEW 32 + error = bus_dma_tag_create(NULL, /* parent */ + 1, 0, /* alignment, boundary */ + BUS_SPACE_MAXADDR_32BIT,/* lowaddr */ + BUS_SPACE_MAXADDR, /* highaddr */ + NULL, NULL, /* filter, filterarg */ + MAXBSIZE, VGE_NSEG_NEW, /* maxsize, nsegments */ + BUS_SPACE_MAXSIZE_32BIT,/* maxsegsize */ + BUS_DMA_ALLOCNOW, /* flags */ + NULL, NULL, /* lockfunc, lockarg */ + &sc->vge_parent_tag); + if (error) + goto fail; + + error = vge_allocmem(dev, sc); + + if (error) + goto fail; + + ifp = sc->vge_ifp = if_alloc(IFT_ETHER); + if (ifp == NULL) { + printf("vge%d: can not if_alloc()\n", sc->vge_unit); + error = ENOSPC; + goto fail; + } + + /* Do MII setup */ + if (mii_phy_probe(dev, &sc->vge_miibus, + vge_ifmedia_upd, vge_ifmedia_sts)) { + printf("vge%d: MII without any phy!\n", sc->vge_unit); + error = ENXIO; + goto fail; + } + + ifp->if_softc = sc; + if_initname(ifp, device_get_name(dev), device_get_unit(dev)); + ifp->if_mtu = ETHERMTU; + ifp->if_flags = IFF_BROADCAST | IFF_SIMPLEX | IFF_MULTICAST; + ifp->if_ioctl = vge_ioctl; + ifp->if_capabilities = IFCAP_VLAN_MTU; + ifp->if_start = vge_start; + ifp->if_hwassist = VGE_CSUM_FEATURES; + ifp->if_capabilities |= IFCAP_HWCSUM|IFCAP_VLAN_HWTAGGING; + ifp->if_capenable = ifp->if_capabilities; +#ifdef DEVICE_POLLING + ifp->if_capabilities |= IFCAP_POLLING; +#endif + ifp->if_watchdog = vge_watchdog; + ifp->if_init = vge_init; + IFQ_SET_MAXLEN(&ifp->if_snd, VGE_IFQ_MAXLEN); + ifp->if_snd.ifq_drv_maxlen = VGE_IFQ_MAXLEN; + IFQ_SET_READY(&ifp->if_snd); + + TASK_INIT(&sc->vge_txtask, 0, vge_tx_task, ifp); + + /* + * Call MI attach routine. + */ + ether_ifattach(ifp, eaddr); + + /* Hook interrupt last to avoid having to lock softc */ + error = bus_setup_intr(dev, sc->vge_irq, INTR_TYPE_NET|INTR_MPSAFE, + NULL, vge_intr, sc, &sc->vge_intrhand); + + if (error) { + printf("vge%d: couldn't set up irq\n", unit); + ether_ifdetach(ifp); + goto fail; + } + +fail: + if (error) + vge_detach(dev); + + return (error); +} + +/* + * Shutdown hardware and free up resources. This can be called any + * time after the mutex has been initialized. It is called in both + * the error case in attach and the normal detach case so it needs + * to be careful about only freeing resources that have actually been + * allocated. + */ +static int +vge_detach(dev) + device_t dev; +{ + struct vge_softc *sc; + struct ifnet *ifp; + int i; + + sc = device_get_softc(dev); + KASSERT(mtx_initialized(&sc->vge_mtx), ("vge mutex not initialized")); + ifp = sc->vge_ifp; + +#ifdef DEVICE_POLLING + if (ifp->if_capenable & IFCAP_POLLING) + ether_poll_deregister(ifp); +#endif + + /* These should only be active if attach succeeded */ + if (device_is_attached(dev)) { + vge_stop(sc); + /* + * Force off the IFF_UP flag here, in case someone + * still had a BPF descriptor attached to this + * interface. If they do, ether_ifattach() will cause + * the BPF code to try and clear the promisc mode + * flag, which will bubble down to vge_ioctl(), + * which will try to call vge_init() again. This will + * turn the NIC back on and restart the MII ticker, + * which will panic the system when the kernel tries + * to invoke the vge_tick() function that isn't there + * anymore. + */ + ifp->if_flags &= ~IFF_UP; + ether_ifdetach(ifp); + } + if (sc->vge_miibus) + device_delete_child(dev, sc->vge_miibus); + bus_generic_detach(dev); + + if (sc->vge_intrhand) + bus_teardown_intr(dev, sc->vge_irq, sc->vge_intrhand); + if (sc->vge_irq) + bus_release_resource(dev, SYS_RES_IRQ, 0, sc->vge_irq); + if (sc->vge_res) + bus_release_resource(dev, SYS_RES_MEMORY, + VGE_PCI_LOMEM, sc->vge_res); + if (ifp) + if_free(ifp); + + /* Unload and free the RX DMA ring memory and map */ + + if (sc->vge_ldata.vge_rx_list_tag) { + bus_dmamap_unload(sc->vge_ldata.vge_rx_list_tag, + sc->vge_ldata.vge_rx_list_map); + bus_dmamem_free(sc->vge_ldata.vge_rx_list_tag, + sc->vge_ldata.vge_rx_list, + sc->vge_ldata.vge_rx_list_map); + bus_dma_tag_destroy(sc->vge_ldata.vge_rx_list_tag); + } + + /* Unload and free the TX DMA ring memory and map */ + + if (sc->vge_ldata.vge_tx_list_tag) { + bus_dmamap_unload(sc->vge_ldata.vge_tx_list_tag, + sc->vge_ldata.vge_tx_list_map); + bus_dmamem_free(sc->vge_ldata.vge_tx_list_tag, + sc->vge_ldata.vge_tx_list, + sc->vge_ldata.vge_tx_list_map); + bus_dma_tag_destroy(sc->vge_ldata.vge_tx_list_tag); + } + + /* Destroy all the RX and TX buffer maps */ + + if (sc->vge_ldata.vge_mtag) { + for (i = 0; i < VGE_TX_DESC_CNT; i++) + bus_dmamap_destroy(sc->vge_ldata.vge_mtag, + sc->vge_ldata.vge_tx_dmamap[i]); + for (i = 0; i < VGE_RX_DESC_CNT; i++) + bus_dmamap_destroy(sc->vge_ldata.vge_mtag, + sc->vge_ldata.vge_rx_dmamap[i]); + bus_dma_tag_destroy(sc->vge_ldata.vge_mtag); + } + + if (sc->vge_parent_tag) + bus_dma_tag_destroy(sc->vge_parent_tag); + + mtx_destroy(&sc->vge_mtx); + + return (0); +} + +static int +vge_newbuf(sc, idx, m) + struct vge_softc *sc; + int idx; + struct mbuf *m; +{ + struct vge_dmaload_arg arg; + struct mbuf *n = NULL; + int i, error; + + if (m == NULL) { + n = m_getcl(M_DONTWAIT, MT_DATA, M_PKTHDR); + if (n == NULL) + return (ENOBUFS); + m = n; + } else + m->m_data = m->m_ext.ext_buf; + + +#ifdef VGE_FIXUP_RX + /* + * This is part of an evil trick to deal with non-x86 platforms. + * The VIA chip requires RX buffers to be aligned on 32-bit + * boundaries, but that will hose non-x86 machines. To get around + * this, we leave some empty space at the start of each buffer + * and for non-x86 hosts, we copy the buffer back two bytes + * to achieve word alignment. This is slightly more efficient + * than allocating a new buffer, copying the contents, and + * discarding the old buffer. + */ + m->m_len = m->m_pkthdr.len = MCLBYTES - VGE_ETHER_ALIGN; + m_adj(m, VGE_ETHER_ALIGN); +#else + m->m_len = m->m_pkthdr.len = MCLBYTES; +#endif + + arg.sc = sc; + arg.vge_idx = idx; + arg.vge_maxsegs = 1; + arg.vge_flags = 0; + + error = bus_dmamap_load_mbuf(sc->vge_ldata.vge_mtag, + sc->vge_ldata.vge_rx_dmamap[idx], m, vge_dma_map_rx_desc, + &arg, BUS_DMA_NOWAIT); + if (error || arg.vge_maxsegs != 1) { + if (n != NULL) + m_freem(n); + return (ENOMEM); + } + + /* + * Note: the manual fails to document the fact that for + * proper opration, the driver needs to replentish the RX + * DMA ring 4 descriptors at a time (rather than one at a + * time, like most chips). We can allocate the new buffers + * but we should not set the OWN bits until we're ready + * to hand back 4 of them in one shot. + */ + +#define VGE_RXCHUNK 4 + sc->vge_rx_consumed++; + if (sc->vge_rx_consumed == VGE_RXCHUNK) { + for (i = idx; i != idx - sc->vge_rx_consumed; i--) + sc->vge_ldata.vge_rx_list[i].vge_sts |= + htole32(VGE_RDSTS_OWN); + sc->vge_rx_consumed = 0; + } + + sc->vge_ldata.vge_rx_mbuf[idx] = m; + + bus_dmamap_sync(sc->vge_ldata.vge_mtag, + sc->vge_ldata.vge_rx_dmamap[idx], + BUS_DMASYNC_PREREAD); + + return (0); +} + +static int +vge_tx_list_init(sc) + struct vge_softc *sc; +{ + bzero ((char *)sc->vge_ldata.vge_tx_list, VGE_TX_LIST_SZ); + bzero ((char *)&sc->vge_ldata.vge_tx_mbuf, + (VGE_TX_DESC_CNT * sizeof(struct mbuf *))); + + bus_dmamap_sync(sc->vge_ldata.vge_tx_list_tag, + sc->vge_ldata.vge_tx_list_map, BUS_DMASYNC_PREWRITE); + sc->vge_ldata.vge_tx_prodidx = 0; + sc->vge_ldata.vge_tx_considx = 0; + sc->vge_ldata.vge_tx_free = VGE_TX_DESC_CNT; + + return (0); +} + +static int +vge_rx_list_init(sc) + struct vge_softc *sc; +{ + int i; + + bzero ((char *)sc->vge_ldata.vge_rx_list, VGE_RX_LIST_SZ); + bzero ((char *)&sc->vge_ldata.vge_rx_mbuf, + (VGE_RX_DESC_CNT * sizeof(struct mbuf *))); + + sc->vge_rx_consumed = 0; + + for (i = 0; i < VGE_RX_DESC_CNT; i++) { + if (vge_newbuf(sc, i, NULL) == ENOBUFS) + return (ENOBUFS); + } + + /* Flush the RX descriptors */ + + bus_dmamap_sync(sc->vge_ldata.vge_rx_list_tag, + sc->vge_ldata.vge_rx_list_map, + BUS_DMASYNC_PREWRITE|BUS_DMASYNC_PREREAD); + + sc->vge_ldata.vge_rx_prodidx = 0; + sc->vge_rx_consumed = 0; + sc->vge_head = sc->vge_tail = NULL; + + return (0); +} + +#ifdef VGE_FIXUP_RX +static __inline void +vge_fixup_rx(m) + struct mbuf *m; +{ + int i; + uint16_t *src, *dst; + + src = mtod(m, uint16_t *); + dst = src - 1; + + for (i = 0; i < (m->m_len / sizeof(uint16_t) + 1); i++) + *dst++ = *src++; + + m->m_data -= ETHER_ALIGN; + + return; +} +#endif + +/* + * RX handler. We support the reception of jumbo frames that have + * been fragmented across multiple 2K mbuf cluster buffers. + */ +static int +vge_rxeof(sc) + struct vge_softc *sc; +{ + struct mbuf *m; + struct ifnet *ifp; + int i, total_len; + int lim = 0; + struct vge_rx_desc *cur_rx; + u_int32_t rxstat, rxctl; + + VGE_LOCK_ASSERT(sc); + ifp = sc->vge_ifp; + i = sc->vge_ldata.vge_rx_prodidx; + + /* Invalidate the descriptor memory */ + + bus_dmamap_sync(sc->vge_ldata.vge_rx_list_tag, + sc->vge_ldata.vge_rx_list_map, + BUS_DMASYNC_POSTREAD); + + while (!VGE_OWN(&sc->vge_ldata.vge_rx_list[i])) { + +#ifdef DEVICE_POLLING + if (ifp->if_capenable & IFCAP_POLLING) { + if (sc->rxcycles <= 0) + break; + sc->rxcycles--; + } +#endif + + cur_rx = &sc->vge_ldata.vge_rx_list[i]; + m = sc->vge_ldata.vge_rx_mbuf[i]; + total_len = VGE_RXBYTES(cur_rx); + rxstat = le32toh(cur_rx->vge_sts); + rxctl = le32toh(cur_rx->vge_ctl); + + /* Invalidate the RX mbuf and unload its map */ + + bus_dmamap_sync(sc->vge_ldata.vge_mtag, + sc->vge_ldata.vge_rx_dmamap[i], + BUS_DMASYNC_POSTWRITE); + bus_dmamap_unload(sc->vge_ldata.vge_mtag, + sc->vge_ldata.vge_rx_dmamap[i]); + + /* + * If the 'start of frame' bit is set, this indicates + * either the first fragment in a multi-fragment receive, + * or an intermediate fragment. Either way, we want to + * accumulate the buffers. + */ + if (rxstat & VGE_RXPKT_SOF) { + m->m_len = MCLBYTES - VGE_ETHER_ALIGN; + if (sc->vge_head == NULL) + sc->vge_head = sc->vge_tail = m; + else { + m->m_flags &= ~M_PKTHDR; + sc->vge_tail->m_next = m; + sc->vge_tail = m; + } + vge_newbuf(sc, i, NULL); + VGE_RX_DESC_INC(i); + continue; + } + + /* + * Bad/error frames will have the RXOK bit cleared. + * However, there's one error case we want to allow: + * if a VLAN tagged frame arrives and the chip can't + * match it against the CAM filter, it considers this + * a 'VLAN CAM filter miss' and clears the 'RXOK' bit. + * We don't want to drop the frame though: our VLAN + * filtering is done in software. + */ + if (!(rxstat & VGE_RDSTS_RXOK) && !(rxstat & VGE_RDSTS_VIDM) + && !(rxstat & VGE_RDSTS_CSUMERR)) { + ifp->if_ierrors++; + /* + * If this is part of a multi-fragment packet, + * discard all the pieces. + */ + if (sc->vge_head != NULL) { + m_freem(sc->vge_head); + sc->vge_head = sc->vge_tail = NULL; + } + vge_newbuf(sc, i, m); + VGE_RX_DESC_INC(i); + continue; + } + + /* + * If allocating a replacement mbuf fails, + * reload the current one. + */ + + if (vge_newbuf(sc, i, NULL)) { + ifp->if_ierrors++; + if (sc->vge_head != NULL) { + m_freem(sc->vge_head); + sc->vge_head = sc->vge_tail = NULL; + } + vge_newbuf(sc, i, m); + VGE_RX_DESC_INC(i); + continue; + } + + VGE_RX_DESC_INC(i); + + if (sc->vge_head != NULL) { + m->m_len = total_len % (MCLBYTES - VGE_ETHER_ALIGN); + /* + * Special case: if there's 4 bytes or less + * in this buffer, the mbuf can be discarded: + * the last 4 bytes is the CRC, which we don't + * care about anyway. + */ + if (m->m_len <= ETHER_CRC_LEN) { + sc->vge_tail->m_len -= + (ETHER_CRC_LEN - m->m_len); + m_freem(m); + } else { + m->m_len -= ETHER_CRC_LEN; + m->m_flags &= ~M_PKTHDR; + sc->vge_tail->m_next = m; + } + m = sc->vge_head; + sc->vge_head = sc->vge_tail = NULL; + m->m_pkthdr.len = total_len - ETHER_CRC_LEN; + } else + m->m_pkthdr.len = m->m_len = + (total_len - ETHER_CRC_LEN); + +#ifdef VGE_FIXUP_RX + vge_fixup_rx(m); +#endif + ifp->if_ipackets++; + m->m_pkthdr.rcvif = ifp; + + /* Do RX checksumming if enabled */ + if (ifp->if_capenable & IFCAP_RXCSUM) { + + /* Check IP header checksum */ + if (rxctl & VGE_RDCTL_IPPKT) + m->m_pkthdr.csum_flags |= CSUM_IP_CHECKED; + if (rxctl & VGE_RDCTL_IPCSUMOK) + m->m_pkthdr.csum_flags |= CSUM_IP_VALID; + + /* Check TCP/UDP checksum */ + if (rxctl & (VGE_RDCTL_TCPPKT|VGE_RDCTL_UDPPKT) && + rxctl & VGE_RDCTL_PROTOCSUMOK) { + m->m_pkthdr.csum_flags |= + CSUM_DATA_VALID|CSUM_PSEUDO_HDR; + m->m_pkthdr.csum_data = 0xffff; + } + } + + if (rxstat & VGE_RDSTS_VTAG) { + /* + * The 32-bit rxctl register is stored in little-endian. + * However, the 16-bit vlan tag is stored in big-endian, + * so we have to byte swap it. + */ + m->m_pkthdr.ether_vtag = + bswap16(rxctl & VGE_RDCTL_VLANID); + m->m_flags |= M_VLANTAG; + } + + VGE_UNLOCK(sc); + (*ifp->if_input)(ifp, m); + VGE_LOCK(sc); + + lim++; + if (lim == VGE_RX_DESC_CNT) + break; + + } + + /* Flush the RX DMA ring */ + + bus_dmamap_sync(sc->vge_ldata.vge_rx_list_tag, + sc->vge_ldata.vge_rx_list_map, + BUS_DMASYNC_PREWRITE|BUS_DMASYNC_PREREAD); + + sc->vge_ldata.vge_rx_prodidx = i; + CSR_WRITE_2(sc, VGE_RXDESC_RESIDUECNT, lim); + + + return (lim); +} + +static void +vge_txeof(sc) + struct vge_softc *sc; +{ + struct ifnet *ifp; + u_int32_t txstat; + int idx; + + ifp = sc->vge_ifp; + idx = sc->vge_ldata.vge_tx_considx; + + /* Invalidate the TX descriptor list */ + + bus_dmamap_sync(sc->vge_ldata.vge_tx_list_tag, + sc->vge_ldata.vge_tx_list_map, + BUS_DMASYNC_POSTREAD); + + while (idx != sc->vge_ldata.vge_tx_prodidx) { + + txstat = le32toh(sc->vge_ldata.vge_tx_list[idx].vge_sts); + if (txstat & VGE_TDSTS_OWN) + break; + + m_freem(sc->vge_ldata.vge_tx_mbuf[idx]); + sc->vge_ldata.vge_tx_mbuf[idx] = NULL; + bus_dmamap_unload(sc->vge_ldata.vge_mtag, + sc->vge_ldata.vge_tx_dmamap[idx]); + if (txstat & (VGE_TDSTS_EXCESSCOLL|VGE_TDSTS_COLL)) + ifp->if_collisions++; + if (txstat & VGE_TDSTS_TXERR) + ifp->if_oerrors++; + else + ifp->if_opackets++; + + sc->vge_ldata.vge_tx_free++; + VGE_TX_DESC_INC(idx); + } + + /* No changes made to the TX ring, so no flush needed */ + + if (idx != sc->vge_ldata.vge_tx_considx) { + sc->vge_ldata.vge_tx_considx = idx; + ifp->if_drv_flags &= ~IFF_DRV_OACTIVE; + ifp->if_timer = 0; + } + + /* + * If not all descriptors have been released reaped yet, + * reload the timer so that we will eventually get another + * interrupt that will cause us to re-enter this routine. + * This is done in case the transmitter has gone idle. + */ + if (sc->vge_ldata.vge_tx_free != VGE_TX_DESC_CNT) { + CSR_WRITE_1(sc, VGE_CRS1, VGE_CR1_TIMER0_ENABLE); + } + + return; +} + +static void +vge_tick(xsc) + void *xsc; +{ + struct vge_softc *sc; + struct ifnet *ifp; + struct mii_data *mii; + + sc = xsc; + ifp = sc->vge_ifp; + VGE_LOCK(sc); + mii = device_get_softc(sc->vge_miibus); + + mii_tick(mii); + if (sc->vge_link) { + if (!(mii->mii_media_status & IFM_ACTIVE)) { + sc->vge_link = 0; + if_link_state_change(sc->vge_ifp, + LINK_STATE_DOWN); + } + } else { + if (mii->mii_media_status & IFM_ACTIVE && + IFM_SUBTYPE(mii->mii_media_active) != IFM_NONE) { + sc->vge_link = 1; + if_link_state_change(sc->vge_ifp, + LINK_STATE_UP); + if (!IFQ_DRV_IS_EMPTY(&ifp->if_snd)) + taskqueue_enqueue(taskqueue_swi, + &sc->vge_txtask); + } + } + + VGE_UNLOCK(sc); + + return; +} + +#ifdef DEVICE_POLLING +static int +vge_poll (struct ifnet *ifp, enum poll_cmd cmd, int count) +{ + struct vge_softc *sc = ifp->if_softc; + int rx_npkts = 0; + + VGE_LOCK(sc); + if (!(ifp->if_drv_flags & IFF_DRV_RUNNING)) + goto done; + + sc->rxcycles = count; + rx_npkts = vge_rxeof(sc); + vge_txeof(sc); + + if (!IFQ_DRV_IS_EMPTY(&ifp->if_snd)) + taskqueue_enqueue(taskqueue_swi, &sc->vge_txtask); + + if (cmd == POLL_AND_CHECK_STATUS) { /* also check status register */ + u_int32_t status; + status = CSR_READ_4(sc, VGE_ISR); + if (status == 0xFFFFFFFF) + goto done; + if (status) + CSR_WRITE_4(sc, VGE_ISR, status); + + /* + * XXX check behaviour on receiver stalls. + */ + + if (status & VGE_ISR_TXDMA_STALL || + status & VGE_ISR_RXDMA_STALL) + vge_init(sc); + + if (status & (VGE_ISR_RXOFLOW|VGE_ISR_RXNODESC)) { + vge_rxeof(sc); + ifp->if_ierrors++; + CSR_WRITE_1(sc, VGE_RXQCSRS, VGE_RXQCSR_RUN); + CSR_WRITE_1(sc, VGE_RXQCSRS, VGE_RXQCSR_WAK); + } + } +done: + VGE_UNLOCK(sc); + return (rx_npkts); +} +#endif /* DEVICE_POLLING */ + +static void +vge_intr(arg) + void *arg; +{ + struct vge_softc *sc; + struct ifnet *ifp; + u_int32_t status; + + sc = arg; + + if (sc->suspended) { + return; + } + + VGE_LOCK(sc); + ifp = sc->vge_ifp; + + if (!(ifp->if_flags & IFF_UP)) { + VGE_UNLOCK(sc); + return; + } + +#ifdef DEVICE_POLLING + if (ifp->if_capenable & IFCAP_POLLING) { + VGE_UNLOCK(sc); + return; + } +#endif + + /* Disable interrupts */ + CSR_WRITE_1(sc, VGE_CRC3, VGE_CR3_INT_GMSK); + + for (;;) { + + status = CSR_READ_4(sc, VGE_ISR); + /* If the card has gone away the read returns 0xffff. */ + if (status == 0xFFFFFFFF) + break; + + if (status) + CSR_WRITE_4(sc, VGE_ISR, status); + + if ((status & VGE_INTRS) == 0) + break; + + if (status & (VGE_ISR_RXOK|VGE_ISR_RXOK_HIPRIO)) + vge_rxeof(sc); + + if (status & (VGE_ISR_RXOFLOW|VGE_ISR_RXNODESC)) { + vge_rxeof(sc); + CSR_WRITE_1(sc, VGE_RXQCSRS, VGE_RXQCSR_RUN); + CSR_WRITE_1(sc, VGE_RXQCSRS, VGE_RXQCSR_WAK); + } + + if (status & (VGE_ISR_TXOK0|VGE_ISR_TIMER0)) + vge_txeof(sc); + + if (status & (VGE_ISR_TXDMA_STALL|VGE_ISR_RXDMA_STALL)) + vge_init(sc); + + if (status & VGE_ISR_LINKSTS) + vge_tick(sc); + } + + /* Re-enable interrupts */ + CSR_WRITE_1(sc, VGE_CRS3, VGE_CR3_INT_GMSK); + + VGE_UNLOCK(sc); + + if (!IFQ_DRV_IS_EMPTY(&ifp->if_snd)) + taskqueue_enqueue(taskqueue_swi, &sc->vge_txtask); + + return; +} + +static int +vge_encap(sc, m_head, idx) + struct vge_softc *sc; + struct mbuf *m_head; + int idx; +{ + struct mbuf *m_new = NULL; + struct vge_dmaload_arg arg; + bus_dmamap_t map; + int error; + + if (sc->vge_ldata.vge_tx_free <= 2) + return (EFBIG); + + arg.vge_flags = 0; + + if (m_head->m_pkthdr.csum_flags & CSUM_IP) + arg.vge_flags |= VGE_TDCTL_IPCSUM; + if (m_head->m_pkthdr.csum_flags & CSUM_TCP) + arg.vge_flags |= VGE_TDCTL_TCPCSUM; + if (m_head->m_pkthdr.csum_flags & CSUM_UDP) + arg.vge_flags |= VGE_TDCTL_UDPCSUM; + + arg.sc = sc; + arg.vge_idx = idx; + arg.vge_m0 = m_head; + arg.vge_maxsegs = VGE_TX_FRAGS; + + map = sc->vge_ldata.vge_tx_dmamap[idx]; + error = bus_dmamap_load_mbuf(sc->vge_ldata.vge_mtag, map, + m_head, vge_dma_map_tx_desc, &arg, BUS_DMA_NOWAIT); + + if (error && error != EFBIG) { + printf("vge%d: can't map mbuf (error %d)\n", + sc->vge_unit, error); + return (ENOBUFS); + } + + /* Too many segments to map, coalesce into a single mbuf */ + + if (error || arg.vge_maxsegs == 0) { + m_new = m_defrag(m_head, M_DONTWAIT); + if (m_new == NULL) + return (1); + else + m_head = m_new; + + arg.sc = sc; + arg.vge_m0 = m_head; + arg.vge_idx = idx; + arg.vge_maxsegs = 1; + + error = bus_dmamap_load_mbuf(sc->vge_ldata.vge_mtag, map, + m_head, vge_dma_map_tx_desc, &arg, BUS_DMA_NOWAIT); + if (error) { + printf("vge%d: can't map mbuf (error %d)\n", + sc->vge_unit, error); + return (EFBIG); + } + } + + sc->vge_ldata.vge_tx_mbuf[idx] = m_head; + sc->vge_ldata.vge_tx_free--; + + /* + * Set up hardware VLAN tagging. + */ + + if (m_head->m_flags & M_VLANTAG) + sc->vge_ldata.vge_tx_list[idx].vge_ctl |= + htole32(m_head->m_pkthdr.ether_vtag | VGE_TDCTL_VTAG); + + sc->vge_ldata.vge_tx_list[idx].vge_sts |= htole32(VGE_TDSTS_OWN); + + return (0); +} + +static void +vge_tx_task(arg, npending) + void *arg; + int npending; +{ + struct ifnet *ifp; + + ifp = arg; + vge_start(ifp); + + return; +} + +/* + * Main transmit routine. + */ + +static void +vge_start(ifp) + struct ifnet *ifp; +{ + struct vge_softc *sc; + struct mbuf *m_head = NULL; + int idx, pidx = 0; + + sc = ifp->if_softc; + VGE_LOCK(sc); + + if (!sc->vge_link || ifp->if_drv_flags & IFF_DRV_OACTIVE) { + VGE_UNLOCK(sc); + return; + } + + if (IFQ_DRV_IS_EMPTY(&ifp->if_snd)) { + VGE_UNLOCK(sc); + return; + } + + idx = sc->vge_ldata.vge_tx_prodidx; + + pidx = idx - 1; + if (pidx < 0) + pidx = VGE_TX_DESC_CNT - 1; + + + while (sc->vge_ldata.vge_tx_mbuf[idx] == NULL) { + IFQ_DRV_DEQUEUE(&ifp->if_snd, m_head); + if (m_head == NULL) + break; + + if (vge_encap(sc, m_head, idx)) { + IFQ_DRV_PREPEND(&ifp->if_snd, m_head); + ifp->if_drv_flags |= IFF_DRV_OACTIVE; + break; + } + + sc->vge_ldata.vge_tx_list[pidx].vge_frag[0].vge_buflen |= + htole16(VGE_TXDESC_Q); + + pidx = idx; + VGE_TX_DESC_INC(idx); + + /* + * If there's a BPF listener, bounce a copy of this frame + * to him. + */ + ETHER_BPF_MTAP(ifp, m_head); + } + + if (idx == sc->vge_ldata.vge_tx_prodidx) { + VGE_UNLOCK(sc); + return; + } + + /* Flush the TX descriptors */ + + bus_dmamap_sync(sc->vge_ldata.vge_tx_list_tag, + sc->vge_ldata.vge_tx_list_map, + BUS_DMASYNC_PREWRITE|BUS_DMASYNC_PREREAD); + + /* Issue a transmit command. */ + CSR_WRITE_2(sc, VGE_TXQCSRS, VGE_TXQCSR_WAK0); + + sc->vge_ldata.vge_tx_prodidx = idx; + + /* + * Use the countdown timer for interrupt moderation. + * 'TX done' interrupts are disabled. Instead, we reset the + * countdown timer, which will begin counting until it hits + * the value in the SSTIMER register, and then trigger an + * interrupt. Each time we set the TIMER0_ENABLE bit, the + * the timer count is reloaded. Only when the transmitter + * is idle will the timer hit 0 and an interrupt fire. + */ + CSR_WRITE_1(sc, VGE_CRS1, VGE_CR1_TIMER0_ENABLE); + + VGE_UNLOCK(sc); + + /* + * Set a timeout in case the chip goes out to lunch. + */ + ifp->if_timer = 5; + + return; +} + +static void +vge_init(xsc) + void *xsc; +{ + struct vge_softc *sc = xsc; + struct ifnet *ifp = sc->vge_ifp; + struct mii_data *mii; + int i; + + VGE_LOCK(sc); + mii = device_get_softc(sc->vge_miibus); + + /* + * Cancel pending I/O and free all RX/TX buffers. + */ + vge_stop(sc); + vge_reset(sc); + + /* + * Initialize the RX and TX descriptors and mbufs. + */ + + vge_rx_list_init(sc); + vge_tx_list_init(sc); + + /* Set our station address */ + for (i = 0; i < ETHER_ADDR_LEN; i++) + CSR_WRITE_1(sc, VGE_PAR0 + i, IF_LLADDR(sc->vge_ifp)[i]); + + /* + * Set receive FIFO threshold. Also allow transmission and + * reception of VLAN tagged frames. + */ + CSR_CLRBIT_1(sc, VGE_RXCFG, VGE_RXCFG_FIFO_THR|VGE_RXCFG_VTAGOPT); + CSR_SETBIT_1(sc, VGE_RXCFG, VGE_RXFIFOTHR_128BYTES|VGE_VTAG_OPT2); + + /* Set DMA burst length */ + CSR_CLRBIT_1(sc, VGE_DMACFG0, VGE_DMACFG0_BURSTLEN); + CSR_SETBIT_1(sc, VGE_DMACFG0, VGE_DMABURST_128); + + CSR_SETBIT_1(sc, VGE_TXCFG, VGE_TXCFG_ARB_PRIO|VGE_TXCFG_NONBLK); + + /* Set collision backoff algorithm */ + CSR_CLRBIT_1(sc, VGE_CHIPCFG1, VGE_CHIPCFG1_CRANDOM| + VGE_CHIPCFG1_CAP|VGE_CHIPCFG1_MBA|VGE_CHIPCFG1_BAKOPT); + CSR_SETBIT_1(sc, VGE_CHIPCFG1, VGE_CHIPCFG1_OFSET); + + /* Disable LPSEL field in priority resolution */ + CSR_SETBIT_1(sc, VGE_DIAGCTL, VGE_DIAGCTL_LPSEL_DIS); + + /* + * Load the addresses of the DMA queues into the chip. + * Note that we only use one transmit queue. + */ + + CSR_WRITE_4(sc, VGE_TXDESC_ADDR_LO0, + VGE_ADDR_LO(sc->vge_ldata.vge_tx_list_addr)); + CSR_WRITE_2(sc, VGE_TXDESCNUM, VGE_TX_DESC_CNT - 1); + + CSR_WRITE_4(sc, VGE_RXDESC_ADDR_LO, + VGE_ADDR_LO(sc->vge_ldata.vge_rx_list_addr)); + CSR_WRITE_2(sc, VGE_RXDESCNUM, VGE_RX_DESC_CNT - 1); + CSR_WRITE_2(sc, VGE_RXDESC_RESIDUECNT, VGE_RX_DESC_CNT); + + /* Enable and wake up the RX descriptor queue */ + CSR_WRITE_1(sc, VGE_RXQCSRS, VGE_RXQCSR_RUN); + CSR_WRITE_1(sc, VGE_RXQCSRS, VGE_RXQCSR_WAK); + + /* Enable the TX descriptor queue */ + CSR_WRITE_2(sc, VGE_TXQCSRS, VGE_TXQCSR_RUN0); + + /* Set up the receive filter -- allow large frames for VLANs. */ + CSR_WRITE_1(sc, VGE_RXCTL, VGE_RXCTL_RX_UCAST|VGE_RXCTL_RX_GIANT); + + /* If we want promiscuous mode, set the allframes bit. */ + if (ifp->if_flags & IFF_PROMISC) { + CSR_SETBIT_1(sc, VGE_RXCTL, VGE_RXCTL_RX_PROMISC); + } + + /* Set capture broadcast bit to capture broadcast frames. */ + if (ifp->if_flags & IFF_BROADCAST) { + CSR_SETBIT_1(sc, VGE_RXCTL, VGE_RXCTL_RX_BCAST); + } + + /* Set multicast bit to capture multicast frames. */ + if (ifp->if_flags & IFF_MULTICAST) { + CSR_SETBIT_1(sc, VGE_RXCTL, VGE_RXCTL_RX_MCAST); + } + + /* Init the cam filter. */ + vge_cam_clear(sc); + + /* Init the multicast filter. */ + vge_setmulti(sc); + + /* Enable flow control */ + + CSR_WRITE_1(sc, VGE_CRS2, 0x8B); + + /* Enable jumbo frame reception (if desired) */ + + /* Start the MAC. */ + CSR_WRITE_1(sc, VGE_CRC0, VGE_CR0_STOP); + CSR_WRITE_1(sc, VGE_CRS1, VGE_CR1_NOPOLL); + CSR_WRITE_1(sc, VGE_CRS0, + VGE_CR0_TX_ENABLE|VGE_CR0_RX_ENABLE|VGE_CR0_START); + + /* + * Configure one-shot timer for microsecond + * resulution and load it for 500 usecs. + */ + CSR_SETBIT_1(sc, VGE_DIAGCTL, VGE_DIAGCTL_TIMER0_RES); + CSR_WRITE_2(sc, VGE_SSTIMER, 400); + + /* + * Configure interrupt moderation for receive. Enable + * the holdoff counter and load it, and set the RX + * suppression count to the number of descriptors we + * want to allow before triggering an interrupt. + * The holdoff timer is in units of 20 usecs. + */ + +#ifdef notyet + CSR_WRITE_1(sc, VGE_INTCTL1, VGE_INTCTL_TXINTSUP_DISABLE); + /* Select the interrupt holdoff timer page. */ + CSR_CLRBIT_1(sc, VGE_CAMCTL, VGE_CAMCTL_PAGESEL); + CSR_SETBIT_1(sc, VGE_CAMCTL, VGE_PAGESEL_INTHLDOFF); + CSR_WRITE_1(sc, VGE_INTHOLDOFF, 10); /* ~200 usecs */ + + /* Enable use of the holdoff timer. */ + CSR_WRITE_1(sc, VGE_CRS3, VGE_CR3_INT_HOLDOFF); + CSR_WRITE_1(sc, VGE_INTCTL1, VGE_INTCTL_SC_RELOAD); + + /* Select the RX suppression threshold page. */ + CSR_CLRBIT_1(sc, VGE_CAMCTL, VGE_CAMCTL_PAGESEL); + CSR_SETBIT_1(sc, VGE_CAMCTL, VGE_PAGESEL_RXSUPPTHR); + CSR_WRITE_1(sc, VGE_RXSUPPTHR, 64); /* interrupt after 64 packets */ + + /* Restore the page select bits. */ + CSR_CLRBIT_1(sc, VGE_CAMCTL, VGE_CAMCTL_PAGESEL); + CSR_SETBIT_1(sc, VGE_CAMCTL, VGE_PAGESEL_MAR); +#endif + +#ifdef DEVICE_POLLING + /* + * Disable interrupts if we are polling. + */ + if (ifp->if_capenable & IFCAP_POLLING) { + CSR_WRITE_4(sc, VGE_IMR, 0); + CSR_WRITE_1(sc, VGE_CRC3, VGE_CR3_INT_GMSK); + } else /* otherwise ... */ +#endif + { + /* + * Enable interrupts. + */ + CSR_WRITE_4(sc, VGE_IMR, VGE_INTRS); + CSR_WRITE_4(sc, VGE_ISR, 0); + CSR_WRITE_1(sc, VGE_CRS3, VGE_CR3_INT_GMSK); + } + + mii_mediachg(mii); + + ifp->if_drv_flags |= IFF_DRV_RUNNING; + ifp->if_drv_flags &= ~IFF_DRV_OACTIVE; + + sc->vge_if_flags = 0; + sc->vge_link = 0; + + VGE_UNLOCK(sc); + + return; +} + +/* + * Set media options. + */ +static int +vge_ifmedia_upd(ifp) + struct ifnet *ifp; +{ + struct vge_softc *sc; + struct mii_data *mii; + + sc = ifp->if_softc; + VGE_LOCK(sc); + mii = device_get_softc(sc->vge_miibus); + mii_mediachg(mii); + VGE_UNLOCK(sc); + + return (0); +} + +/* + * Report current media status. + */ +static void +vge_ifmedia_sts(ifp, ifmr) + struct ifnet *ifp; + struct ifmediareq *ifmr; +{ + struct vge_softc *sc; + struct mii_data *mii; + + sc = ifp->if_softc; + mii = device_get_softc(sc->vge_miibus); + + mii_pollstat(mii); + ifmr->ifm_active = mii->mii_media_active; + ifmr->ifm_status = mii->mii_media_status; + + return; +} + +static void +vge_miibus_statchg(dev) + device_t dev; +{ + struct vge_softc *sc; + struct mii_data *mii; + struct ifmedia_entry *ife; + + sc = device_get_softc(dev); + mii = device_get_softc(sc->vge_miibus); + ife = mii->mii_media.ifm_cur; + + /* + * If the user manually selects a media mode, we need to turn + * on the forced MAC mode bit in the DIAGCTL register. If the + * user happens to choose a full duplex mode, we also need to + * set the 'force full duplex' bit. This applies only to + * 10Mbps and 100Mbps speeds. In autoselect mode, forced MAC + * mode is disabled, and in 1000baseT mode, full duplex is + * always implied, so we turn on the forced mode bit but leave + * the FDX bit cleared. + */ + + switch (IFM_SUBTYPE(ife->ifm_media)) { + case IFM_AUTO: + CSR_CLRBIT_1(sc, VGE_DIAGCTL, VGE_DIAGCTL_MACFORCE); + CSR_CLRBIT_1(sc, VGE_DIAGCTL, VGE_DIAGCTL_FDXFORCE); + break; + case IFM_1000_T: + CSR_SETBIT_1(sc, VGE_DIAGCTL, VGE_DIAGCTL_MACFORCE); + CSR_CLRBIT_1(sc, VGE_DIAGCTL, VGE_DIAGCTL_FDXFORCE); + break; + case IFM_100_TX: + case IFM_10_T: + CSR_SETBIT_1(sc, VGE_DIAGCTL, VGE_DIAGCTL_MACFORCE); + if ((ife->ifm_media & IFM_GMASK) == IFM_FDX) { + CSR_SETBIT_1(sc, VGE_DIAGCTL, VGE_DIAGCTL_FDXFORCE); + } else { + CSR_CLRBIT_1(sc, VGE_DIAGCTL, VGE_DIAGCTL_FDXFORCE); + } + break; + default: + device_printf(dev, "unknown media type: %x\n", + IFM_SUBTYPE(ife->ifm_media)); + break; + } + + return; +} + +static int +vge_ioctl(ifp, command, data) + struct ifnet *ifp; + u_long command; + caddr_t data; +{ + struct vge_softc *sc = ifp->if_softc; + struct ifreq *ifr = (struct ifreq *) data; + struct mii_data *mii; + int error = 0; + + switch (command) { + case SIOCSIFMTU: + if (ifr->ifr_mtu > VGE_JUMBO_MTU) + error = EINVAL; + ifp->if_mtu = ifr->ifr_mtu; + break; + case SIOCSIFFLAGS: + if (ifp->if_flags & IFF_UP) { + if (ifp->if_drv_flags & IFF_DRV_RUNNING && + ifp->if_flags & IFF_PROMISC && + !(sc->vge_if_flags & IFF_PROMISC)) { + CSR_SETBIT_1(sc, VGE_RXCTL, + VGE_RXCTL_RX_PROMISC); + vge_setmulti(sc); + } else if (ifp->if_drv_flags & IFF_DRV_RUNNING && + !(ifp->if_flags & IFF_PROMISC) && + sc->vge_if_flags & IFF_PROMISC) { + CSR_CLRBIT_1(sc, VGE_RXCTL, + VGE_RXCTL_RX_PROMISC); + vge_setmulti(sc); + } else + vge_init(sc); + } else { + if (ifp->if_drv_flags & IFF_DRV_RUNNING) + vge_stop(sc); + } + sc->vge_if_flags = ifp->if_flags; + break; + case SIOCADDMULTI: + case SIOCDELMULTI: + vge_setmulti(sc); + break; + case SIOCGIFMEDIA: + case SIOCSIFMEDIA: + mii = device_get_softc(sc->vge_miibus); + error = ifmedia_ioctl(ifp, ifr, &mii->mii_media, command); + break; + case SIOCSIFCAP: + { + int mask = ifr->ifr_reqcap ^ ifp->if_capenable; +#ifdef DEVICE_POLLING + if (mask & IFCAP_POLLING) { + if (ifr->ifr_reqcap & IFCAP_POLLING) { + error = ether_poll_register(vge_poll, ifp); + if (error) + return(error); + VGE_LOCK(sc); + /* Disable interrupts */ + CSR_WRITE_4(sc, VGE_IMR, 0); + CSR_WRITE_1(sc, VGE_CRC3, VGE_CR3_INT_GMSK); + ifp->if_capenable |= IFCAP_POLLING; + VGE_UNLOCK(sc); + } else { + error = ether_poll_deregister(ifp); + /* Enable interrupts. */ + VGE_LOCK(sc); + CSR_WRITE_4(sc, VGE_IMR, VGE_INTRS); + CSR_WRITE_4(sc, VGE_ISR, 0xFFFFFFFF); + CSR_WRITE_1(sc, VGE_CRS3, VGE_CR3_INT_GMSK); + ifp->if_capenable &= ~IFCAP_POLLING; + VGE_UNLOCK(sc); + } + } +#endif /* DEVICE_POLLING */ + if ((mask & IFCAP_TXCSUM) != 0 && + (ifp->if_capabilities & IFCAP_TXCSUM) != 0) { + ifp->if_capenable ^= IFCAP_TXCSUM; + if ((ifp->if_capenable & IFCAP_TXCSUM) != 0) + ifp->if_hwassist |= VGE_CSUM_FEATURES; + else + ifp->if_hwassist &= ~VGE_CSUM_FEATURES; + } + if ((mask & IFCAP_RXCSUM) != 0 && + (ifp->if_capabilities & IFCAP_RXCSUM) != 0) + ifp->if_capenable ^= IFCAP_RXCSUM; + } + break; + default: + error = ether_ioctl(ifp, command, data); + break; + } + + return (error); +} + +static void +vge_watchdog(ifp) + struct ifnet *ifp; +{ + struct vge_softc *sc; + + sc = ifp->if_softc; + VGE_LOCK(sc); + printf("vge%d: watchdog timeout\n", sc->vge_unit); + ifp->if_oerrors++; + + vge_txeof(sc); + vge_rxeof(sc); + + vge_init(sc); + + VGE_UNLOCK(sc); + + return; +} + +/* + * Stop the adapter and free any mbufs allocated to the + * RX and TX lists. + */ +static void +vge_stop(sc) + struct vge_softc *sc; +{ + register int i; + struct ifnet *ifp; + + VGE_LOCK(sc); + ifp = sc->vge_ifp; + ifp->if_timer = 0; + + ifp->if_drv_flags &= ~(IFF_DRV_RUNNING | IFF_DRV_OACTIVE); + + CSR_WRITE_1(sc, VGE_CRC3, VGE_CR3_INT_GMSK); + CSR_WRITE_1(sc, VGE_CRS0, VGE_CR0_STOP); + CSR_WRITE_4(sc, VGE_ISR, 0xFFFFFFFF); + CSR_WRITE_2(sc, VGE_TXQCSRC, 0xFFFF); + CSR_WRITE_1(sc, VGE_RXQCSRC, 0xFF); + CSR_WRITE_4(sc, VGE_RXDESC_ADDR_LO, 0); + + if (sc->vge_head != NULL) { + m_freem(sc->vge_head); + sc->vge_head = sc->vge_tail = NULL; + } + + /* Free the TX list buffers. */ + + for (i = 0; i < VGE_TX_DESC_CNT; i++) { + if (sc->vge_ldata.vge_tx_mbuf[i] != NULL) { + bus_dmamap_unload(sc->vge_ldata.vge_mtag, + sc->vge_ldata.vge_tx_dmamap[i]); + m_freem(sc->vge_ldata.vge_tx_mbuf[i]); + sc->vge_ldata.vge_tx_mbuf[i] = NULL; + } + } + + /* Free the RX list buffers. */ + + for (i = 0; i < VGE_RX_DESC_CNT; i++) { + if (sc->vge_ldata.vge_rx_mbuf[i] != NULL) { + bus_dmamap_unload(sc->vge_ldata.vge_mtag, + sc->vge_ldata.vge_rx_dmamap[i]); + m_freem(sc->vge_ldata.vge_rx_mbuf[i]); + sc->vge_ldata.vge_rx_mbuf[i] = NULL; + } + } + + VGE_UNLOCK(sc); + + return; +} + +/* + * Device suspend routine. Stop the interface and save some PCI + * settings in case the BIOS doesn't restore them properly on + * resume. + */ +static int +vge_suspend(dev) + device_t dev; +{ + struct vge_softc *sc; + + sc = device_get_softc(dev); + + vge_stop(sc); + + sc->suspended = 1; + + return (0); +} + +/* + * Device resume routine. Restore some PCI settings in case the BIOS + * doesn't, re-enable busmastering, and restart the interface if + * appropriate. + */ +static int +vge_resume(dev) + device_t dev; +{ + struct vge_softc *sc; + struct ifnet *ifp; + + sc = device_get_softc(dev); + ifp = sc->vge_ifp; + + /* reenable busmastering */ + pci_enable_busmaster(dev); + pci_enable_io(dev, SYS_RES_MEMORY); + + /* reinitialize interface if necessary */ + if (ifp->if_flags & IFF_UP) + vge_init(sc); + + sc->suspended = 0; + + return (0); +} + +/* + * Stop all chip I/O so that the kernel's probe routines don't + * get confused by errant DMAs when rebooting. + */ +static int +vge_shutdown(dev) + device_t dev; +{ + struct vge_softc *sc; + + sc = device_get_softc(dev); + + vge_stop(sc); + + return (0); +} diff --git a/src/add-ons/kernel/drivers/network/vt612x/dev/vge/if_vgereg.h b/src/add-ons/kernel/drivers/network/vt612x/dev/vge/if_vgereg.h new file mode 100644 index 0000000000..8d11a9c3e1 --- /dev/null +++ b/src/add-ons/kernel/drivers/network/vt612x/dev/vge/if_vgereg.h @@ -0,0 +1,697 @@ +/*- + * Copyright (c) 2004 + * Bill Paul . All rights reserved. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions + * are met: + * 1. Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * 2. Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in the + * documentation and/or other materials provided with the distribution. + * 3. All advertising materials mentioning features or use of this software + * must display the following acknowledgement: + * This product includes software developed by Bill Paul. + * 4. Neither the name of the author nor the names of any co-contributors + * may be used to endorse or promote products derived from this software + * without specific prior written permission. + * + * THIS SOFTWARE IS PROVIDED BY Bill Paul AND CONTRIBUTORS ``AS IS'' AND + * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE + * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE + * ARE DISCLAIMED. IN NO EVENT SHALL Bill Paul OR THE VOICES IN HIS HEAD + * BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR + * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF + * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS + * INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN + * CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) + * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF + * THE POSSIBILITY OF SUCH DAMAGE. + * + * $FreeBSD$ + */ + +/* + * Register definitions for the VIA VT6122 gigabit ethernet controller. + * Definitions for the built-in copper PHY can be found in vgphy.h. + * + * The VT612x controllers have 256 bytes of register space. The + * manual seems to imply that the registers should all be accessed + * using 32-bit I/O cycles, but some of them are less than 32 bits + * wide. Go figure. + */ + +#ifndef _IF_VGEREG_H_ +#define _IF_VGEREG_H_ + +#define VIA_VENDORID 0x1106 +#define VIA_DEVICEID_61XX 0x3119 + +#define VGE_PAR0 0x00 /* physical address register */ +#define VGE_PAR1 0x02 +#define VGE_PAR2 0x04 +#define VGE_RXCTL 0x06 /* RX control register */ +#define VGE_TXCTL 0x07 /* TX control register */ +#define VGE_CRS0 0x08 /* Global cmd register 0 (w to set) */ +#define VGE_CRS1 0x09 /* Global cmd register 1 (w to set) */ +#define VGE_CRS2 0x0A /* Global cmd register 2 (w to set) */ +#define VGE_CRS3 0x0B /* Global cmd register 3 (w to set) */ +#define VGE_CRC0 0x0C /* Global cmd register 0 (w to clr) */ +#define VGE_CRC1 0x0D /* Global cmd register 1 (w to clr) */ +#define VGE_CRC2 0x0E /* Global cmd register 2 (w to clr) */ +#define VGE_CRC3 0x0F /* Global cmd register 3 (w to clr) */ +#define VGE_MAR0 0x10 /* Mcast hash/CAM register 0 */ +#define VGE_MAR1 0x14 /* Mcast hash/CAM register 1 */ +#define VGE_CAM0 0x10 +#define VGE_CAM1 0x11 +#define VGE_CAM2 0x12 +#define VGE_CAM3 0x13 +#define VGE_CAM4 0x14 +#define VGE_CAM5 0x15 +#define VGE_CAM6 0x16 +#define VGE_CAM7 0x17 +#define VGE_TXDESC_HIADDR 0x18 /* Hi part of 64bit txdesc base addr */ +#define VGE_DATABUF_HIADDR 0x1D /* Hi part of 64bit data buffer addr */ +#define VGE_INTCTL0 0x20 /* interrupt control register */ +#define VGE_RXSUPPTHR 0x20 +#define VGE_TXSUPPTHR 0x20 +#define VGE_INTHOLDOFF 0x20 +#define VGE_INTCTL1 0x21 /* interrupt control register */ +#define VGE_TXHOSTERR 0x22 /* TX host error status */ +#define VGE_RXHOSTERR 0x23 /* RX host error status */ +#define VGE_ISR 0x24 /* Interrupt status register */ +#define VGE_IMR 0x28 /* Interrupt mask register */ +#define VGE_TXSTS_PORT 0x2C /* Transmit status port (???) */ +#define VGE_TXQCSRS 0x30 /* TX queue ctl/status set */ +#define VGE_RXQCSRS 0x32 /* RX queue ctl/status set */ +#define VGE_TXQCSRC 0x34 /* TX queue ctl/status clear */ +#define VGE_RXQCSRC 0x36 /* RX queue ctl/status clear */ +#define VGE_RXDESC_ADDR_LO 0x38 /* RX desc base addr (lo 32 bits) */ +#define VGE_RXDESC_CONSIDX 0x3C /* Current RX descriptor index */ +#define VGE_RXQTIMER 0x3E /* RX queue timer pend register */ +#define VGE_TXQTIMER 0x3F /* TX queue timer pend register */ +#define VGE_TXDESC_ADDR_LO0 0x40 /* TX desc0 base addr (lo 32 bits) */ +#define VGE_TXDESC_ADDR_LO1 0x44 /* TX desc1 base addr (lo 32 bits) */ +#define VGE_TXDESC_ADDR_LO2 0x48 /* TX desc2 base addr (lo 32 bits) */ +#define VGE_TXDESC_ADDR_LO3 0x4C /* TX desc3 base addr (lo 32 bits) */ +#define VGE_RXDESCNUM 0x50 /* Size of RX desc ring */ +#define VGE_TXDESCNUM 0x52 /* Size of TX desc ring */ +#define VGE_TXDESC_CONSIDX0 0x54 /* Current TX descriptor index */ +#define VGE_TXDESC_CONSIDX1 0x56 /* Current TX descriptor index */ +#define VGE_TXDESC_CONSIDX2 0x58 /* Current TX descriptor index */ +#define VGE_TXDESC_CONSIDX3 0x5A /* Current TX descriptor index */ +#define VGE_TX_PAUSE_TIMER 0x5C /* TX pause frame timer */ +#define VGE_RXDESC_RESIDUECNT 0x5E /* RX descriptor residue count */ +#define VGE_FIFOTEST0 0x60 /* FIFO test register */ +#define VGE_FIFOTEST1 0x64 /* FIFO test register */ +#define VGE_CAMADDR 0x68 /* CAM address register */ +#define VGE_CAMCTL 0x69 /* CAM control register */ +#define VGE_GFTEST 0x6A +#define VGE_FTSCMD 0x6B +#define VGE_MIICFG 0x6C /* MII port config register */ +#define VGE_MIISTS 0x6D /* MII port status register */ +#define VGE_PHYSTS0 0x6E /* PHY status register */ +#define VGE_PHYSTS1 0x6F /* PHY status register */ +#define VGE_MIICMD 0x70 /* MII command register */ +#define VGE_MIIADDR 0x71 /* MII address register */ +#define VGE_MIIDATA 0x72 /* MII data register */ +#define VGE_SSTIMER 0x74 /* single-shot timer */ +#define VGE_PTIMER 0x76 /* periodic timer */ +#define VGE_CHIPCFG0 0x78 /* chip config A */ +#define VGE_CHIPCFG1 0x79 /* chip config B */ +#define VGE_CHIPCFG2 0x7A /* chip config C */ +#define VGE_CHIPCFG3 0x7B /* chip config D */ +#define VGE_DMACFG0 0x7C /* DMA config 0 */ +#define VGE_DMACFG1 0x7D /* DMA config 1 */ +#define VGE_RXCFG 0x7E /* MAC RX config */ +#define VGE_TXCFG 0x7F /* MAC TX config */ +#define VGE_PWRMGMT 0x82 /* power management shadow register */ +#define VGE_PWRSTAT 0x83 /* power state shadow register */ +#define VGE_MIBCSR 0x84 /* MIB control/status register */ +#define VGE_SWEEDATA 0x85 /* EEPROM software loaded data */ +#define VGE_MIBDATA 0x88 /* MIB data register */ +#define VGE_EEWRDAT 0x8C /* EEPROM embedded write */ +#define VGE_EECSUM 0x92 /* EEPROM checksum */ +#define VGE_EECSR 0x93 /* EEPROM control/status */ +#define VGE_EERDDAT 0x94 /* EEPROM embedded read */ +#define VGE_EEADDR 0x96 /* EEPROM address */ +#define VGE_EECMD 0x97 /* EEPROM embedded command */ +#define VGE_CHIPSTRAP 0x99 /* Chip jumper strapping status */ +#define VGE_MEDIASTRAP 0x9B /* Media jumper strapping */ +#define VGE_DIAGSTS 0x9C /* Chip diagnostic status */ +#define VGE_DBGCTL 0x9E /* Chip debug control */ +#define VGE_DIAGCTL 0x9F /* Chip diagnostic control */ +#define VGE_WOLCR0S 0xA0 /* WOL0 event set */ +#define VGE_WOLCR1S 0xA1 /* WOL1 event set */ +#define VGE_PWRCFGS 0xA2 /* Power management config set */ +#define VGE_WOLCFGS 0xA3 /* WOL config set */ +#define VGE_WOLCR0C 0xA4 /* WOL0 event clear */ +#define VGE_WOLCR1C 0xA5 /* WOL1 event clear */ +#define VGE_PWRCFGC 0xA6 /* Power management config clear */ +#define VGE_WOLCFGC 0xA7 /* WOL config clear */ +#define VGE_WOLSR0S 0xA8 /* WOL status set */ +#define VGE_WOLSR1S 0xA9 /* WOL status set */ +#define VGE_WOLSR0C 0xAC /* WOL status clear */ +#define VGE_WOLSR1C 0xAD /* WOL status clear */ +#define VGE_WAKEPAT_CRC0 0xB0 +#define VGE_WAKEPAT_CRC1 0xB2 +#define VGE_WAKEPAT_CRC2 0xB4 +#define VGE_WAKEPAT_CRC3 0xB6 +#define VGE_WAKEPAT_CRC4 0xB8 +#define VGE_WAKEPAT_CRC5 0xBA +#define VGE_WAKEPAT_CRC6 0xBC +#define VGE_WAKEPAT_CRC7 0xBE +#define VGE_WAKEPAT_MSK0_0 0xC0 +#define VGE_WAKEPAT_MSK0_1 0xC4 +#define VGE_WAKEPAT_MSK0_2 0xC8 +#define VGE_WAKEPAT_MSK0_3 0xCC +#define VGE_WAKEPAT_MSK1_0 0xD0 +#define VGE_WAKEPAT_MSK1_1 0xD4 +#define VGE_WAKEPAT_MSK1_2 0xD8 +#define VGE_WAKEPAT_MSK1_3 0xDC +#define VGE_WAKEPAT_MSK2_0 0xE0 +#define VGE_WAKEPAT_MSK2_1 0xE4 +#define VGE_WAKEPAT_MSK2_2 0xE8 +#define VGE_WAKEPAT_MSK2_3 0xEC +#define VGE_WAKEPAT_MSK3_0 0xF0 +#define VGE_WAKEPAT_MSK3_1 0xF4 +#define VGE_WAKEPAT_MSK3_2 0xF8 +#define VGE_WAKEPAT_MSK3_3 0xFC + +/* Receive control register */ + +#define VGE_RXCTL_RX_BADFRAMES 0x01 /* accept CRC error frames */ +#define VGE_RXCTL_RX_RUNT 0x02 /* accept runts */ +#define VGE_RXCTL_RX_MCAST 0x04 /* accept multicasts */ +#define VGE_RXCTL_RX_BCAST 0x08 /* accept broadcasts */ +#define VGE_RXCTL_RX_PROMISC 0x10 /* promisc mode */ +#define VGE_RXCTL_RX_GIANT 0x20 /* accept VLAN tagged frames */ +#define VGE_RXCTL_RX_UCAST 0x40 /* use perfect filtering */ +#define VGE_RXCTL_RX_SYMERR 0x80 /* accept symbol err packet */ + +/* Transmit control register */ + +#define VGE_TXCTL_LOOPCTL 0x03 /* loopback control */ +#define VGE_TXCTL_COLLCTL 0x0C /* collision retry control */ + +#define VGE_TXLOOPCTL_OFF 0x00 +#define VGE_TXLOOPCTL_MAC_INTERNAL 0x01 +#define VGE_TXLOOPCTL_EXTERNAL 0x02 + +#define VGE_TXCOLLS_NORMAL 0x00 /* one set of 16 retries */ +#define VGE_TXCOLLS_32 0x04 /* two sets of 16 retries */ +#define VGE_TXCOLLS_48 0x08 /* three sets of 16 retries */ +#define VGE_TXCOLLS_INFINITE 0x0C /* retry forever */ + +/* Global command register 0 */ + +#define VGE_CR0_START 0x01 /* start NIC */ +#define VGE_CR0_STOP 0x02 /* stop NIC */ +#define VGE_CR0_RX_ENABLE 0x04 /* turn on RX engine */ +#define VGE_CR0_TX_ENABLE 0x08 /* turn on TX engine */ + +/* Global command register 1 */ + +#define VGE_CR1_NOUCAST 0x01 /* disable unicast reception */ +#define VGE_CR1_NOPOLL 0x08 /* disable RX/TX desc polling */ +#define VGE_CR1_TIMER0_ENABLE 0x20 /* enable single shot timer */ +#define VGE_CR1_TIMER1_ENABLE 0x40 /* enable periodic timer */ +#define VGE_CR1_SOFTRESET 0x80 /* software reset */ + +/* Global command register 2 */ + +#define VGE_CR2_TXPAUSE_THRESH_LO 0x03 /* TX pause frame lo threshold */ +#define VGE_CR2_TXPAUSE_THRESH_HI 0x0C /* TX pause frame hi threshold */ +#define VGE_CR2_HDX_FLOWCTL_ENABLE 0x10 /* half duplex flow control */ +#define VGE_CR2_FDX_RXFLOWCTL_ENABLE 0x20 /* full duplex RX flow control */ +#define VGE_CR2_FDX_TXFLOWCTL_ENABLE 0x40 /* full duplex TX flow control */ +#define VGE_CR2_XON_ENABLE 0x80 /* 802.3x XON/XOFF flow control */ + +/* Global command register 3 */ + +#define VGE_CR3_INT_SWPEND 0x01 /* disable multi-level int bits */ +#define VGE_CR3_INT_GMSK 0x02 /* mask off all interrupts */ +#define VGE_CR3_INT_HOLDOFF 0x04 /* enable int hold off timer */ +#define VGE_CR3_DIAG 0x10 /* diagnostic enabled */ +#define VGE_CR3_PHYRST 0x20 /* assert PHYRSTZ */ +#define VGE_CR3_STOP_FORCE 0x40 /* force NIC to stopped state */ + +/* Interrupt control register */ + +#define VGE_INTCTL_SC_RELOAD 0x01 /* reload hold timer */ +#define VGE_INTCTL_HC_RELOAD 0x02 /* enable hold timer reload */ +#define VGE_INTCTL_STATUS 0x04 /* interrupt pending status */ +#define VGE_INTCTL_MASK 0x18 /* multilayer int mask */ +#define VGE_INTCTL_RXINTSUP_DISABLE 0x20 /* disable RX int supression */ +#define VGE_INTCTL_TXINTSUP_DISABLE 0x40 /* disable TX int supression */ +#define VGE_INTCTL_SOFTINT 0x80 /* request soft interrupt */ + +#define VGE_INTMASK_LAYER0 0x00 +#define VGE_INTMASK_LAYER1 0x08 +#define VGE_INTMASK_ALL 0x10 +#define VGE_INTMASK_ALL2 0x18 + +/* Transmit host error status register */ + +#define VGE_TXHOSTERR_TDSTRUCT 0x01 /* bad TX desc structure */ +#define VGE_TXHOSTERR_TDFETCH_BUSERR 0x02 /* bus error on desc fetch */ +#define VGE_TXHOSTERR_TDWBACK_BUSERR 0x04 /* bus error on desc writeback */ +#define VGE_TXHOSTERR_FIFOERR 0x08 /* TX FIFO DMA bus error */ + +/* Receive host error status register */ + +#define VGE_RXHOSTERR_RDSTRUCT 0x01 /* bad RX desc structure */ +#define VGE_RXHOSTERR_RDFETCH_BUSERR 0x02 /* bus error on desc fetch */ +#define VGE_RXHOSTERR_RDWBACK_BUSERR 0x04 /* bus error on desc writeback */ +#define VGE_RXHOSTERR_FIFOERR 0x08 /* RX FIFO DMA bus error */ + +/* Interrupt status register */ + +#define VGE_ISR_RXOK_HIPRIO 0x00000001 /* hi prio RX int */ +#define VGE_ISR_TXOK_HIPRIO 0x00000002 /* hi prio TX int */ +#define VGE_ISR_RXOK 0x00000004 /* normal RX done */ +#define VGE_ISR_TXOK 0x00000008 /* combo results for next 4 bits */ +#define VGE_ISR_TXOK0 0x00000010 /* TX complete on queue 0 */ +#define VGE_ISR_TXOK1 0x00000020 /* TX complete on queue 1 */ +#define VGE_ISR_TXOK2 0x00000040 /* TX complete on queue 2 */ +#define VGE_ISR_TXOK3 0x00000080 /* TX complete on queue 3 */ +#define VGE_ISR_RXCNTOFLOW 0x00000400 /* RX packet count overflow */ +#define VGE_ISR_RXPAUSE 0x00000800 /* pause frame RX'ed */ +#define VGE_ISR_RXOFLOW 0x00001000 /* RX FIFO overflow */ +#define VGE_ISR_RXNODESC 0x00002000 /* ran out of RX descriptors */ +#define VGE_ISR_RXNODESC_WARN 0x00004000 /* running out of RX descs */ +#define VGE_ISR_LINKSTS 0x00008000 /* link status change */ +#define VGE_ISR_TIMER0 0x00010000 /* one shot timer expired */ +#define VGE_ISR_TIMER1 0x00020000 /* periodic timer expired */ +#define VGE_ISR_PWR 0x00040000 /* wake up power event */ +#define VGE_ISR_PHYINT 0x00080000 /* PHY interrupt */ +#define VGE_ISR_STOPPED 0x00100000 /* software shutdown complete */ +#define VGE_ISR_MIBOFLOW 0x00200000 /* MIB counter overflow warning */ +#define VGE_ISR_SOFTINT 0x00400000 /* software interrupt */ +#define VGE_ISR_HOLDOFF_RELOAD 0x00800000 /* reload hold timer */ +#define VGE_ISR_RXDMA_STALL 0x01000000 /* RX DMA stall */ +#define VGE_ISR_TXDMA_STALL 0x02000000 /* TX DMA STALL */ +#define VGE_ISR_ISRC0 0x10000000 /* interrupt source indication */ +#define VGE_ISR_ISRC1 0x20000000 /* interrupt source indication */ +#define VGE_ISR_ISRC2 0x40000000 /* interrupt source indication */ +#define VGE_ISR_ISRC3 0x80000000 /* interrupt source indication */ + +#define VGE_INTRS (VGE_ISR_TXOK0|VGE_ISR_RXOK|VGE_ISR_STOPPED| \ + VGE_ISR_RXOFLOW|VGE_ISR_PHYINT| \ + VGE_ISR_LINKSTS|VGE_ISR_RXNODESC| \ + VGE_ISR_RXDMA_STALL|VGE_ISR_TXDMA_STALL| \ + VGE_ISR_MIBOFLOW|VGE_ISR_TIMER0) + +/* Interrupt mask register */ + +#define VGE_IMR_RXOK_HIPRIO 0x00000001 /* hi prio RX int */ +#define VGE_IMR_TXOK_HIPRIO 0x00000002 /* hi prio TX int */ +#define VGE_IMR_RXOK 0x00000004 /* normal RX done */ +#define VGE_IMR_TXOK 0x00000008 /* combo results for next 4 bits */ +#define VGE_IMR_TXOK0 0x00000010 /* TX complete on queue 0 */ +#define VGE_IMR_TXOK1 0x00000020 /* TX complete on queue 1 */ +#define VGE_IMR_TXOK2 0x00000040 /* TX complete on queue 2 */ +#define VGE_IMR_TXOK3 0x00000080 /* TX complete on queue 3 */ +#define VGE_IMR_RXCNTOFLOW 0x00000400 /* RX packet count overflow */ +#define VGE_IMR_RXPAUSE 0x00000800 /* pause frame RX'ed */ +#define VGE_IMR_RXOFLOW 0x00001000 /* RX FIFO overflow */ +#define VGE_IMR_RXNODESC 0x00002000 /* ran out of RX descriptors */ +#define VGE_IMR_RXNODESC_WARN 0x00004000 /* running out of RX descs */ +#define VGE_IMR_LINKSTS 0x00008000 /* link status change */ +#define VGE_IMR_TIMER0 0x00010000 /* one shot timer expired */ +#define VGE_IMR_TIMER1 0x00020000 /* periodic timer expired */ +#define VGE_IMR_PWR 0x00040000 /* wake up power event */ +#define VGE_IMR_PHYINT 0x00080000 /* PHY interrupt */ +#define VGE_IMR_STOPPED 0x00100000 /* software shutdown complete */ +#define VGE_IMR_MIBOFLOW 0x00200000 /* MIB counter overflow warning */ +#define VGE_IMR_SOFTINT 0x00400000 /* software interrupt */ +#define VGE_IMR_HOLDOFF_RELOAD 0x00800000 /* reload hold timer */ +#define VGE_IMR_RXDMA_STALL 0x01000000 /* RX DMA stall */ +#define VGE_IMR_TXDMA_STALL 0x02000000 /* TX DMA STALL */ +#define VGE_IMR_ISRC0 0x10000000 /* interrupt source indication */ +#define VGE_IMR_ISRC1 0x20000000 /* interrupt source indication */ +#define VGE_IMR_ISRC2 0x40000000 /* interrupt source indication */ +#define VGE_IMR_ISRC3 0x80000000 /* interrupt source indication */ + +/* TX descriptor queue control/status register */ + +#define VGE_TXQCSR_RUN0 0x0001 /* Enable TX queue 0 */ +#define VGE_TXQCSR_ACT0 0x0002 /* queue 0 active indicator */ +#define VGE_TXQCSR_WAK0 0x0004 /* Wake up (poll) queue 0 */ +#define VGE_TXQCST_DEAD0 0x0008 /* queue 0 dead indicator */ +#define VGE_TXQCSR_RUN1 0x0010 /* Enable TX queue 1 */ +#define VGE_TXQCSR_ACT1 0x0020 /* queue 1 active indicator */ +#define VGE_TXQCSR_WAK1 0x0040 /* Wake up (poll) queue 1 */ +#define VGE_TXQCST_DEAD1 0x0080 /* queue 1 dead indicator */ +#define VGE_TXQCSR_RUN2 0x0100 /* Enable TX queue 2 */ +#define VGE_TXQCSR_ACT2 0x0200 /* queue 2 active indicator */ +#define VGE_TXQCSR_WAK2 0x0400 /* Wake up (poll) queue 2 */ +#define VGE_TXQCST_DEAD2 0x0800 /* queue 2 dead indicator */ +#define VGE_TXQCSR_RUN3 0x1000 /* Enable TX queue 3 */ +#define VGE_TXQCSR_ACT3 0x2000 /* queue 3 active indicator */ +#define VGE_TXQCSR_WAK3 0x4000 /* Wake up (poll) queue 3 */ +#define VGE_TXQCST_DEAD3 0x8000 /* queue 3 dead indicator */ + +/* RX descriptor queue control/status register */ + +#define VGE_RXQCSR_RUN 0x0001 /* Enable RX queue */ +#define VGE_RXQCSR_ACT 0x0002 /* queue active indicator */ +#define VGE_RXQCSR_WAK 0x0004 /* Wake up (poll) queue */ +#define VGE_RXQCSR_DEAD 0x0008 /* queue dead indicator */ + +/* RX/TX queue empty interrupt delay timer register */ + +#define VGE_QTIMER_PENDCNT 0x3F +#define VGE_QTIMER_RESOLUTION 0xC0 + +#define VGE_QTIMER_RES_1US 0x00 +#define VGE_QTIMER_RES_4US 0x40 +#define VGE_QTIMER_RES_16US 0x80 +#define VGE_QTIMER_RES_64US 0xC0 + +/* CAM address register */ + +#define VGE_CAMADDR_ADDR 0x3F /* CAM address to program */ +#define VGE_CAMADDR_AVSEL 0x40 /* 0 = address cam, 1 = VLAN cam */ +#define VGE_CAMADDR_ENABLE 0x80 /* enable CAM read/write */ + +#define VGE_CAM_MAXADDRS 64 + +/* + * CAM command register + * Note that the page select bits in this register affect three + * different things: + * - The behavior of the MAR0/MAR1 registers at offset 0x10 (the + * page select bits control whether the MAR0/MAR1 registers affect + * the multicast hash filter or the CAM table) + * - The behavior of the interrupt holdoff timer register at offset + * 0x20 (the page select bits allow you to set the interrupt + * holdoff timer, the TX interrupt supression count or the + * RX interrupt supression count) + * - The behavior the WOL pattern programming registers at offset + * 0xC0 (controls which pattern is set) + */ + + +#define VGE_CAMCTL_WRITE 0x04 /* CAM write command */ +#define VGE_CAMCTL_READ 0x08 /* CAM read command */ +#define VGE_CAMCTL_INTPKT_SIZ 0x10 /* select interesting pkt CAM size */ +#define VGE_CAMCTL_INTPKT_ENB 0x20 /* enable interesting packet mode */ +#define VGE_CAMCTL_PAGESEL 0xC0 /* page select */ + +#define VGE_PAGESEL_MAR 0x00 +#define VGE_PAGESEL_CAMMASK 0x40 +#define VGE_PAGESEL_CAMDATA 0x80 + +#define VGE_PAGESEL_INTHLDOFF 0x00 +#define VGE_PAGESEL_TXSUPPTHR 0x40 +#define VGE_PAGESEL_RXSUPPTHR 0x80 + +#define VGE_PAGESEL_WOLPAT0 0x00 +#define VGE_PAGESEL_WOLPAT1 0x40 + +/* MII port config register */ + +#define VGE_MIICFG_PHYADDR 0x1F /* PHY address (internal PHY is 1) */ +#define VGE_MIICFG_MDCSPEED 0x20 /* MDC accelerate x 4 */ +#define VGE_MIICFG_POLLINT 0xC0 /* polling interval */ + +#define VGE_MIIPOLLINT_1024 0x00 +#define VGE_MIIPOLLINT_512 0x40 +#define VGE_MIIPOLLINT_128 0x80 +#define VGE_MIIPOLLINT_64 0xC0 + +/* MII port status register */ + +#define VGE_MIISTS_IIDL 0x80 /* not at sofrware/timer poll cycle */ + +/* PHY status register */ + +#define VGE_PHYSTS_TXFLOWCAP 0x01 /* resolved TX flow control cap */ +#define VGE_PHYSTS_RXFLOWCAP 0x02 /* resolved RX flow control cap */ +#define VGE_PHYSTS_SPEED10 0x04 /* PHY in 10Mbps mode */ +#define VGE_PHYSTS_SPEED1000 0x08 /* PHY in giga mode */ +#define VGE_PHYSTS_FDX 0x10 /* PHY in full duplex mode */ +#define VGE_PHYSTS_LINK 0x40 /* link status */ +#define VGE_PHYSTS_RESETSTS 0x80 /* reset status */ + +/* MII management command register */ + +#define VGE_MIICMD_MDC 0x01 /* clock pin */ +#define VGE_MIICMD_MDI 0x02 /* data in pin */ +#define VGE_MIICMD_MDO 0x04 /* data out pin */ +#define VGE_MIICMD_MOUT 0x08 /* data out pin enable */ +#define VGE_MIICMD_MDP 0x10 /* enable direct programming mode */ +#define VGE_MIICMD_WCMD 0x20 /* embedded mode write */ +#define VGE_MIICMD_RCMD 0x40 /* embadded mode read */ +#define VGE_MIICMD_MAUTO 0x80 /* enable autopolling */ + +/* MII address register */ + +#define VGE_MIIADDR_SWMPL 0x80 /* initiate priority resolution */ + +/* Chip config register A */ + +#define VGE_CHIPCFG0_PACPI 0x01 /* pre-ACPI wakeup function */ +#define VGE_CHIPCFG0_ABSHDN 0x02 /* abnormal shutdown function */ +#define VGE_CHIPCFG0_GPIO1PD 0x04 /* GPIO pin enable */ +#define VGE_CHIPCFG0_SKIPTAG 0x08 /* omit 802.1p tag from CRC calc */ +#define VGE_CHIPCFG0_PHLED 0x30 /* phy LED select */ + +/* Chip config register B */ +/* Note: some of these bits are not documented in the manual! */ + +#define VGE_CHIPCFG1_BAKOPT 0x01 +#define VGE_CHIPCFG1_MBA 0x02 +#define VGE_CHIPCFG1_CAP 0x04 +#define VGE_CHIPCFG1_CRANDOM 0x08 +#define VGE_CHIPCFG1_OFSET 0x10 +#define VGE_CHIPCFG1_SLOTTIME 0x20 /* slot time 512/500 in giga mode */ +#define VGE_CHIPCFG1_MIIOPT 0x40 +#define VGE_CHIPCFG1_GTCKOPT 0x80 + +/* Chip config register C */ + +#define VGE_CHIPCFG2_EELOAD 0x80 /* enable EEPROM programming */ + +/* Chip config register D */ + +#define VGE_CHIPCFG3_64BIT_DAC 0x20 /* enable 64bit via DAC */ +#define VGE_CHIPCFG3_IODISABLE 0x80 /* disable I/O access mode */ + +/* DMA config register 0 */ + +#define VGE_DMACFG0_BURSTLEN 0x07 /* RX/TX DMA burst (in dwords) */ + +#define VGE_DMABURST_8 0x00 +#define VGE_DMABURST_16 0x01 +#define VGE_DMABURST_32 0x02 +#define VGE_DMABURST_64 0x03 +#define VGE_DMABURST_128 0x04 +#define VGE_DMABURST_256 0x05 +#define VGE_DMABURST_STRFWD 0x07 + +/* DMA config register 1 */ + +#define VGE_DMACFG1_LATENB 0x01 /* Latency timer enable */ +#define VGE_DMACFG1_MWWAIT 0x02 /* insert wait on master write */ +#define VGE_DMACFG1_MRWAIT 0x04 /* insert wait on master read */ +#define VGE_DMACFG1_MRM 0x08 /* use memory read multiple */ +#define VGE_DMACFG1_PERR_DIS 0x10 /* disable parity error checking */ +#define VGE_DMACFG1_XMRL 0x20 /* disable memory read line support */ + +/* RX MAC config register */ + +#define VGE_RXCFG_VLANFILT 0x01 /* filter VLAN ID mismatches */ +#define VGE_RXCFG_VTAGOPT 0x06 /* VLAN tag handling */ +#define VGE_RXCFG_FIFO_LOWAT 0x08 /* RX FIFO low watermark (7QW/15QW) */ +#define VGE_RXCFG_FIFO_THR 0x30 /* RX FIFO threshold */ +#define VGE_RXCFG_ARB_PRIO 0x80 /* arbitration priority */ + +#define VGE_VTAG_OPT0 0x00 /* TX: no tag insertion + RX: rx all, no tag extraction */ + +#define VGE_VTAG_OPT1 0x02 /* TX: no tag insertion + RX: rx only tagged pkts, no + extraction */ + +#define VGE_VTAG_OPT2 0x04 /* TX: perform tag insertion, + RX: rx all, extract tags */ + +#define VGE_VTAG_OPT3 0x06 /* TX: perform tag insertion, + RX: rx only tagged pkts, + with extraction */ + +#define VGE_RXFIFOTHR_128BYTES 0x00 +#define VGE_RXFIFOTHR_512BYTES 0x10 +#define VGE_RXFIFOTHR_1024BYTES 0x20 +#define VGE_RXFIFOTHR_STRNFWD 0x30 + +/* TX MAC config register */ + +#define VGE_TXCFG_SNAPOPT 0x01 /* 1 == insert VLAN tag at + 13th byte + 0 == insert VLANM tag after + SNAP header (21st byte) */ +#define VGE_TXCFG_NONBLK 0x02 /* priority TX/non-blocking mode */ +#define VGE_TXCFG_NONBLK_THR 0x0C /* non-blocking threshold */ +#define VGE_TXCFG_ARB_PRIO 0x80 /* arbitration priority */ + +#define VGE_TXBLOCK_64PKTS 0x00 +#define VGE_TXBLOCK_32PKTS 0x04 +#define VGE_TXBLOCK_128PKTS 0x08 +#define VGE_TXBLOCK_8PKTS 0x0C + +/* EEPROM control/status register */ + +#define VGE_EECSR_EDO 0x01 /* data out pin */ +#define VGE_EECSR_EDI 0x02 /* data in pin */ +#define VGE_EECSR_ECK 0x04 /* clock pin */ +#define VGE_EECSR_ECS 0x08 /* chip select pin */ +#define VGE_EECSR_DPM 0x10 /* direct program mode enable */ +#define VGE_EECSR_RELOAD 0x20 /* trigger reload from EEPROM */ +#define VGE_EECSR_EMBP 0x40 /* embedded program mode enable */ + +/* EEPROM embedded command register */ + +#define VGE_EECMD_ERD 0x01 /* EEPROM read command */ +#define VGE_EECMD_EWR 0x02 /* EEPROM write command */ +#define VGE_EECMD_EWEN 0x04 /* EEPROM write enable */ +#define VGE_EECMD_EWDIS 0x08 /* EEPROM write disable */ +#define VGE_EECMD_EDONE 0x80 /* read/write done */ + +/* Chip operation and diagnostic control register */ + +#define VGE_DIAGCTL_PHYINT_ENB 0x01 /* Enable PHY interrupts */ +#define VGE_DIAGCTL_TIMER0_RES 0x02 /* timer0 uSec resolution */ +#define VGE_DIAGCTL_TIMER1_RES 0x04 /* timer1 uSec resolution */ +#define VGE_DIAGCTL_LPSEL_DIS 0x08 /* disable LPSEL field */ +#define VGE_DIAGCTL_MACFORCE 0x10 /* MAC side force mode */ +#define VGE_DIAGCTL_FCRSVD 0x20 /* reserved for future fiber use */ +#define VGE_DIAGCTL_FDXFORCE 0x40 /* force full duplex mode */ +#define VGE_DIAGCTL_GMII 0x80 /* force GMII mode, otherwise MII */ + +/* Location of station address in EEPROM */ +#define VGE_EE_EADDR 0 + +/* DMA descriptor structures */ + +/* + * Each TX DMA descriptor has a control and status word, and 7 + * fragment address/length words. If a transmitted packet spans + * more than 7 fragments, it has to be coalesced. + */ + +#define VGE_TX_FRAGS 7 + +struct vge_tx_frag { + uint32_t vge_addrlo; + uint16_t vge_addrhi; + uint16_t vge_buflen; +}; + +/* + * The high bit in the buflen field of fragment #0 has special meaning. + * Normally, the chip requires the driver to issue a TX poll command + * for every packet that gets put in the TX DMA queue. Sometimes though, + * the driver might want to queue up several packets at once and just + * issue one transmit command to have all of them processed. In order + * to obtain this behavior, the special 'queue' bit must be set. + */ + +#define VGE_TXDESC_Q 0x8000 + +struct vge_tx_desc { + uint32_t vge_sts; + uint32_t vge_ctl; + struct vge_tx_frag vge_frag[VGE_TX_FRAGS]; +}; + +#define VGE_TDSTS_COLLCNT 0x0000000F /* TX collision count */ +#define VGE_TDSTS_COLL 0x00000010 /* collision seen */ +#define VGE_TDSTS_OWINCOLL 0x00000020 /* out of window collision */ +#define VGE_TDSTS_OWT 0x00000040 /* jumbo frame tx abort */ +#define VGE_TDSTS_EXCESSCOLL 0x00000080 /* TX aborted, excess colls */ +#define VGE_TDSTS_HBEATFAIL 0x00000100 /* heartbeat detect failed */ +#define VGE_TDSTS_CARRLOSS 0x00000200 /* carrier sense lost */ +#define VGE_TDSTS_SHUTDOWN 0x00000400 /* shutdown during TX */ +#define VGE_TDSTS_LINKFAIL 0x00001000 /* link fail during TX */ +#define VGE_TDSTS_GMII 0x00002000 /* GMII transmission */ +#define VGE_TDSTS_FDX 0x00004000 /* full duplex transmit */ +#define VGE_TDSTS_TXERR 0x00008000 /* error occurred */ +#define VGE_TDSTS_SEGSIZE 0x3FFF0000 /* TCP large send size */ +#define VGE_TDSTS_OWN 0x80000000 /* own bit */ + +#define VGE_TDCTL_VLANID 0x00000FFF /* VLAN ID */ +#define VGE_TDCTL_CFI 0x00001000 /* VLAN CFI bit */ +#define VGE_TDCTL_PRIO 0x0000E000 /* VLAN prio bits */ +#define VGE_TDCTL_NOCRC 0x00010000 /* disable CRC generation */ +#define VGE_TDCTL_JUMBO 0x00020000 /* jumbo frame */ +#define VGE_TDCTL_TCPCSUM 0x00040000 /* do TCP hw checksum */ +#define VGE_TDCTL_UDPCSUM 0x00080000 /* do UDP hw checksum */ +#define VGE_TDCTL_IPCSUM 0x00100000 /* do IP hw checksum */ +#define VGE_TDCTL_VTAG 0x00200000 /* insert VLAN tag */ +#define VGE_TDCTL_PRIO_INT 0x00400000 /* priority int request */ +#define VGE_TDCTL_TIC 0x00800000 /* transfer int request */ +#define VGE_TDCTL_TCPLSCTL 0x03000000 /* TCP large send ctl */ +#define VGE_TDCTL_FRAGCNT 0xF0000000 /* number of frags used */ + +#define VGE_TD_LS_MOF 0x00000000 /* middle of large send */ +#define VGE_TD_LS_SOF 0x01000000 /* start of large send */ +#define VGE_TD_LS_EOF 0x02000000 /* end of large send */ +#define VGE_TD_LS_NORM 0x03000000 /* normal frame */ + +/* Receive DMA descriptors have a single fragment pointer. */ + +struct vge_rx_desc { + volatile uint32_t vge_sts; + volatile uint32_t vge_ctl; + volatile uint32_t vge_addrlo; + volatile uint16_t vge_addrhi; + volatile uint16_t vge_buflen; +}; + +/* + * Like the TX descriptor, the high bit in the buflen field in the + * RX descriptor has special meaning. This bit controls whether or + * not interrupts are generated for this descriptor. + */ + +#define VGE_RXDESC_I 0x8000 + +#define VGE_RDSTS_VIDM 0x00000001 /* VLAN tag filter miss */ +#define VGE_RDSTS_CRCERR 0x00000002 /* bad CRC error */ +#define VGE_RDSTS_FAERR 0x00000004 /* frame alignment error */ +#define VGE_RDSTS_CSUMERR 0x00000008 /* bad TCP/IP checksum */ +#define VGE_RDSTS_RLERR 0x00000010 /* RX length error */ +#define VGE_RDSTS_SYMERR 0x00000020 /* PCS symbol error */ +#define VGE_RDSTS_SNTAG 0x00000040 /* RX'ed tagged SNAP pkt */ +#define VGE_RDSTS_DETAG 0x00000080 /* VLAN tag extracted */ +#define VGE_RDSTS_BOUNDARY 0x00000300 /* frame boundary bits */ +#define VGE_RDSTS_VTAG 0x00000400 /* VLAN tag indicator */ +#define VGE_RDSTS_UCAST 0x00000800 /* unicast frame */ +#define VGE_RDSTS_BCAST 0x00001000 /* broadcast frame */ +#define VGE_RDSTS_MCAST 0x00002000 /* multicast frame */ +#define VGE_RDSTS_PFT 0x00004000 /* perfect filter hit */ +#define VGE_RDSTS_RXOK 0x00008000 /* frame is good. */ +#define VGE_RDSTS_BUFSIZ 0x3FFF0000 /* received frame len */ +#define VGE_RDSTS_SHUTDOWN 0x40000000 /* shutdown during RX */ +#define VGE_RDSTS_OWN 0x80000000 /* own bit. */ + +#define VGE_RXPKT_ONEFRAG 0x00000000 /* only one fragment */ +#define VGE_RXPKT_EOF 0x00000100 /* first frag in frame */ +#define VGE_RXPKT_SOF 0x00000200 /* last frag in frame */ +#define VGE_RXPKT_MOF 0x00000300 /* intermediate frag */ + +#define VGE_RDCTL_VLANID 0x0000FFFF /* VLAN ID info */ +#define VGE_RDCTL_UDPPKT 0x00010000 /* UDP packet received */ +#define VGE_RDCTL_TCPPKT 0x00020000 /* TCP packet received */ +#define VGE_RDCTL_IPPKT 0x00040000 /* IP packet received */ +#define VGE_RDCTL_UDPZERO 0x00080000 /* pkt with UDP CSUM of 0 */ +#define VGE_RDCTL_FRAG 0x00100000 /* received IP frag */ +#define VGE_RDCTL_PROTOCSUMOK 0x00200000 /* TCP/UDP checksum ok */ +#define VGE_RDCTL_IPCSUMOK 0x00400000 /* IP checksum ok */ +#define VGE_RDCTL_FILTIDX 0x3C000000 /* interesting filter idx */ + +#endif /* _IF_VGEREG_H_ */ diff --git a/src/add-ons/kernel/drivers/network/vt612x/dev/vge/if_vgevar.h b/src/add-ons/kernel/drivers/network/vt612x/dev/vge/if_vgevar.h new file mode 100644 index 0000000000..c4224f7eff --- /dev/null +++ b/src/add-ons/kernel/drivers/network/vt612x/dev/vge/if_vgevar.h @@ -0,0 +1,167 @@ +/*- + * Copyright (c) 2004 + * Bill Paul . All rights reserved. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions + * are met: + * 1. Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * 2. Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in the + * documentation and/or other materials provided with the distribution. + * 3. All advertising materials mentioning features or use of this software + * must display the following acknowledgement: + * This product includes software developed by Bill Paul. + * 4. Neither the name of the author nor the names of any co-contributors + * may be used to endorse or promote products derived from this software + * without specific prior written permission. + * + * THIS SOFTWARE IS PROVIDED BY Bill Paul AND CONTRIBUTORS ``AS IS'' AND + * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE + * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE + * ARE DISCLAIMED. IN NO EVENT SHALL Bill Paul OR THE VOICES IN HIS HEAD + * BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR + * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF + * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS + * INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN + * CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) + * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF + * THE POSSIBILITY OF SUCH DAMAGE. + * + * $FreeBSD$ + */ + +#if !defined(__i386__) +#define VGE_FIXUP_RX +#endif + +#define VGE_JUMBO_MTU 9000 + +#define VGE_IFQ_MAXLEN 64 + +#define VGE_TX_DESC_CNT 256 +#define VGE_RX_DESC_CNT 256 /* Must be a multiple of 4!! */ +#define VGE_RING_ALIGN 256 +#define VGE_RX_LIST_SZ (VGE_RX_DESC_CNT * sizeof(struct vge_rx_desc)) +#define VGE_TX_LIST_SZ (VGE_TX_DESC_CNT * sizeof(struct vge_tx_desc)) +#define VGE_TX_DESC_INC(x) (x = (x + 1) % VGE_TX_DESC_CNT) +#define VGE_RX_DESC_INC(x) (x = (x + 1) % VGE_RX_DESC_CNT) +#define VGE_ADDR_LO(y) ((u_int64_t) (y) & 0xFFFFFFFF) +#define VGE_ADDR_HI(y) ((u_int64_t) (y) >> 32) +#define VGE_BUFLEN(y) ((y) & 0x7FFF) +#define VGE_OWN(x) (le32toh((x)->vge_sts) & VGE_RDSTS_OWN) +#define VGE_RXBYTES(x) ((le32toh((x)->vge_sts) & \ + VGE_RDSTS_BUFSIZ) >> 16) +#define VGE_MIN_FRAMELEN 60 + +#ifdef VGE_FIXUP_RX +#define VGE_ETHER_ALIGN sizeof(uint32_t) +#else +#define VGE_ETHER_ALIGN 0 +#endif + +struct vge_type { + uint16_t vge_vid; + uint16_t vge_did; + char *vge_name; +}; + +struct vge_softc; + +struct vge_dmaload_arg { + struct vge_softc *sc; + int vge_idx; + int vge_maxsegs; + struct mbuf *vge_m0; + u_int32_t vge_flags; +}; + +struct vge_list_data { + struct mbuf *vge_tx_mbuf[VGE_TX_DESC_CNT]; + struct mbuf *vge_rx_mbuf[VGE_RX_DESC_CNT]; + int vge_tx_prodidx; + int vge_rx_prodidx; + int vge_tx_considx; + int vge_tx_free; + bus_dmamap_t vge_tx_dmamap[VGE_TX_DESC_CNT]; + bus_dmamap_t vge_rx_dmamap[VGE_RX_DESC_CNT]; + bus_dma_tag_t vge_mtag; /* mbuf mapping tag */ + bus_dma_tag_t vge_rx_list_tag; + bus_dmamap_t vge_rx_list_map; + struct vge_rx_desc *vge_rx_list; + bus_addr_t vge_rx_list_addr; + bus_dma_tag_t vge_tx_list_tag; + bus_dmamap_t vge_tx_list_map; + struct vge_tx_desc *vge_tx_list; + bus_addr_t vge_tx_list_addr; +}; + +struct vge_softc { + struct ifnet *vge_ifp; /* interface info */ + device_t vge_dev; + bus_space_handle_t vge_bhandle; /* bus space handle */ + bus_space_tag_t vge_btag; /* bus space tag */ + struct resource *vge_res; + struct resource *vge_irq; + void *vge_intrhand; + device_t vge_miibus; + bus_dma_tag_t vge_parent_tag; + bus_dma_tag_t vge_tag; + u_int8_t vge_unit; /* interface number */ + u_int8_t vge_type; + int vge_if_flags; + int vge_rx_consumed; + int vge_link; + int vge_camidx; + struct task vge_txtask; + struct mtx vge_mtx; + struct mbuf *vge_head; + struct mbuf *vge_tail; + + struct vge_list_data vge_ldata; + + int suspended; /* 0 = normal 1 = suspended */ +#ifdef DEVICE_POLLING + int rxcycles; +#endif +}; + +#define VGE_LOCK(_sc) mtx_lock(&(_sc)->vge_mtx) +#define VGE_UNLOCK(_sc) mtx_unlock(&(_sc)->vge_mtx) +#define VGE_LOCK_ASSERT(_sc) mtx_assert(&(_sc)->vge_mtx, MA_OWNED) + +/* + * register space access macros + */ +#define CSR_WRITE_STREAM_4(sc, reg, val) \ + bus_space_write_stream_4(sc->vge_btag, sc->vge_bhandle, reg, val) +#define CSR_WRITE_4(sc, reg, val) \ + bus_space_write_4(sc->vge_btag, sc->vge_bhandle, reg, val) +#define CSR_WRITE_2(sc, reg, val) \ + bus_space_write_2(sc->vge_btag, sc->vge_bhandle, reg, val) +#define CSR_WRITE_1(sc, reg, val) \ + bus_space_write_1(sc->vge_btag, sc->vge_bhandle, reg, val) + +#define CSR_READ_4(sc, reg) \ + bus_space_read_4(sc->vge_btag, sc->vge_bhandle, reg) +#define CSR_READ_2(sc, reg) \ + bus_space_read_2(sc->vge_btag, sc->vge_bhandle, reg) +#define CSR_READ_1(sc, reg) \ + bus_space_read_1(sc->vge_btag, sc->vge_bhandle, reg) + +#define CSR_SETBIT_1(sc, reg, x) \ + CSR_WRITE_1(sc, reg, CSR_READ_1(sc, reg) | (x)) +#define CSR_SETBIT_2(sc, reg, x) \ + CSR_WRITE_2(sc, reg, CSR_READ_2(sc, reg) | (x)) +#define CSR_SETBIT_4(sc, reg, x) \ + CSR_WRITE_4(sc, reg, CSR_READ_4(sc, reg) | (x)) + +#define CSR_CLRBIT_1(sc, reg, x) \ + CSR_WRITE_1(sc, reg, CSR_READ_1(sc, reg) & ~(x)) +#define CSR_CLRBIT_2(sc, reg, x) \ + CSR_WRITE_2(sc, reg, CSR_READ_2(sc, reg) & ~(x)) +#define CSR_CLRBIT_4(sc, reg, x) \ + CSR_WRITE_4(sc, reg, CSR_READ_4(sc, reg) & ~(x)) + +#define VGE_TIMEOUT 10000