haiku/headers/private/graphics/common/i2c.h

82 lines
2.5 KiB
C
Raw Normal View History

/*
* Copyright 2003, Thomas Kurschel. All Rights Reserved.
* Distributed under the terms of the MIT License.
*/
#ifndef _I2C_H
#define _I2C_H
#include <OS.h>
// timing for i2c bus
typedef struct i2c_timing {
// general timing as defined by standard
// (in microseconds for 100kHz/400kHz mode)
int buf; // bus free between start and stop (4.7/1.3)
int hd_sta; // hold time start condition (4.0/0.6)
int low; // low period of clock (4.7/1.3)
int high; // high period of clock (4.0/0.6)
int su_sta; // setup time of repeated start condition (4.7/0.6)
int hd_dat; // hold time data (5.0/- for CBUS, 0/0 for I2C)
int su_dat; // setup time data (0.250/0.100)
int r; // maximum raise time of clock and data signal (1.0/0.3)
int f; // maximum fall time of clock and data signal (0.3/0.3)
int su_sto; // setup time for stop condition (4.0/0.6)
// clock stretching limits, not part of i2c standard
int start_timeout; // max. delay of start condition
int byte_timeout; // max. delay of first bit of byte
int bit_timeout; // max. delay of one bit within a byte transmission
int ack_start_timeout; // max. delay of acknowledge start
// other timeouts, not part of i2c standard
int ack_timeout; // timeout of waiting for acknowledge
} i2c_timing;
struct i2c_bus;
// set signals on bus
typedef status_t (*i2c_set_signals)(void *cookie, int clock, int data);
// read signals from bus
typedef status_t (*i2c_get_signals)(void *cookie, int *clock, int *data);
// send/receive from bus
typedef status_t (*i2c_send_receive)(const struct i2c_bus *bus, uint32 slave_address,
const uint8 *writeBuffer, size_t writeLength, uint8 *readBuffer,
size_t readLength);
// i2c bus definition
typedef struct i2c_bus {
void *cookie; // user-defined cookie
// low-level
i2c_timing timing;
i2c_set_signals set_signals; // callback to set signals
i2c_get_signals get_signals; // callback to detect signals
// high-level
i2c_send_receive send_receive;
} i2c_bus;
#ifdef __cplusplus
extern "C" {
#endif
// send and receive data via i2c bus
status_t i2c_send_receive_callback(const i2c_bus *bus, uint32 slave_address,
const uint8 *writeBuffer, size_t writeLength, uint8 *readBuffer,
size_t readLength);
// fill <timing> with standard 100kHz bus timing
void i2c_get100k_timing(i2c_timing *timing);
// fill <timing> with standard 400kHz bus timing
// (as timing resolution is 1 microsecond, we cannot reach full speed!)
void i2c_get400k_timing(i2c_timing *timing);
#ifdef __cplusplus
}
#endif
#endif /* _I2C_H */