haiku/build/jam/repositories/HaikuPortsCross/x86_gcc2

88 lines
2.1 KiB
Plaintext
Raw Normal View History

Integrate building the HaikuPorts bootstrap packages * Add configure option --bootstrap which allows specifying the haikuporter and HaikuPorts repository paths. * Add rules for supporting a second repository type. The PackageRepository rule is now private and RemotePackageRepository is used for remote repositories. The new BootstrapPackageRepository rule is for defining a bootstrap repository (there will probably be only the HaikuPorts cross repository) whose packages can be built as needed via haikuporter. * Rename DownloadPackage to FetchPackage. * Define repository HaikuPortsCross. * HaikuCrossDevel package(s): There are now two sets of packages: A "stage1" set with the same content as before and a final set additionally containing the libraries libbe, libnetwork, libpackage. Those are needed for building the libsolv bootstrap package while for building them we need other bootstrap packages (ICU, libz). This is basically all that's required to build a bootstrap Haiku completely from sources, with a few caveats: * There's no ICU bootstrap recipe yet (so one has to cheat and use the prebuilt package ATM). * Probably doesn't work on Haiku yet (tested on Linux only). * A 32 bit environment must be used (otherwise building the gcc 2 bootstrap package fails). * Building with multiple jobs doesn't work yet, since haikuporter uses common directories for building different packages and there's no explicit serialization yet. * Haven't tested the resulting image save for booting it. So it probably needs a bit more work before it can actually build the final HaikuPorts packages.
2013-07-21 06:10:48 +04:00
BootstrapPackageRepository HaikuPortsCross
: x86_gcc2
:
# architecture "any" packages
haikuporter-0-1
Integrate building the HaikuPorts bootstrap packages * Add configure option --bootstrap which allows specifying the haikuporter and HaikuPorts repository paths. * Add rules for supporting a second repository type. The PackageRepository rule is now private and RemotePackageRepository is used for remote repositories. The new BootstrapPackageRepository rule is for defining a bootstrap repository (there will probably be only the HaikuPorts cross repository) whose packages can be built as needed via haikuporter. * Rename DownloadPackage to FetchPackage. * Define repository HaikuPortsCross. * HaikuCrossDevel package(s): There are now two sets of packages: A "stage1" set with the same content as before and a final set additionally containing the libraries libbe, libnetwork, libpackage. Those are needed for building the libsolv bootstrap package while for building them we need other bootstrap packages (ICU, libz). This is basically all that's required to build a bootstrap Haiku completely from sources, with a few caveats: * There's no ICU bootstrap recipe yet (so one has to cheat and use the prebuilt package ATM). * Probably doesn't work on Haiku yet (tested on Linux only). * A 32 bit environment must be used (otherwise building the gcc 2 bootstrap package fails). * Building with multiple jobs doesn't work yet, since haikuporter uses common directories for building different packages and there's no explicit serialization yet. * Haven't tested the resulting image save for booting it. So it probably needs a bit more work before it can actually build the final HaikuPorts packages.
2013-07-21 06:10:48 +04:00
:
# repository architecture packages (stage 0)
gcc_bootstrap-2.95.3_2014_08_03-1
gcc_bootstrap_syslibs_devel-2.95.3_2014_08_03-1
secondary_x86_gcc2 @{
gcc_bootstrap_x86-5.4.0_2016_06_04-1
gcc_bootstrap_x86_syslibs-5.4.0_2016_06_04-1
gcc_bootstrap_x86_syslibs_devel-5.4.0_2016_06_04-1
}@ # secondary_x86_gcc2
:
Integrate building the HaikuPorts bootstrap packages * Add configure option --bootstrap which allows specifying the haikuporter and HaikuPorts repository paths. * Add rules for supporting a second repository type. The PackageRepository rule is now private and RemotePackageRepository is used for remote repositories. The new BootstrapPackageRepository rule is for defining a bootstrap repository (there will probably be only the HaikuPorts cross repository) whose packages can be built as needed via haikuporter. * Rename DownloadPackage to FetchPackage. * Define repository HaikuPortsCross. * HaikuCrossDevel package(s): There are now two sets of packages: A "stage1" set with the same content as before and a final set additionally containing the libraries libbe, libnetwork, libpackage. Those are needed for building the libsolv bootstrap package while for building them we need other bootstrap packages (ICU, libz). This is basically all that's required to build a bootstrap Haiku completely from sources, with a few caveats: * There's no ICU bootstrap recipe yet (so one has to cheat and use the prebuilt package ATM). * Probably doesn't work on Haiku yet (tested on Linux only). * A 32 bit environment must be used (otherwise building the gcc 2 bootstrap package fails). * Building with multiple jobs doesn't work yet, since haikuporter uses common directories for building different packages and there's no explicit serialization yet. * Haven't tested the resulting image save for booting it. So it probably needs a bit more work before it can actually build the final HaikuPorts packages.
2013-07-21 06:10:48 +04:00
# repository architecture packages (stage 1)
bash_bootstrap-4.3.42-1
binutils_bootstrap-2.17_2013_04_21-3
Integrate building the HaikuPorts bootstrap packages * Add configure option --bootstrap which allows specifying the haikuporter and HaikuPorts repository paths. * Add rules for supporting a second repository type. The PackageRepository rule is now private and RemotePackageRepository is used for remote repositories. The new BootstrapPackageRepository rule is for defining a bootstrap repository (there will probably be only the HaikuPorts cross repository) whose packages can be built as needed via haikuporter. * Rename DownloadPackage to FetchPackage. * Define repository HaikuPortsCross. * HaikuCrossDevel package(s): There are now two sets of packages: A "stage1" set with the same content as before and a final set additionally containing the libraries libbe, libnetwork, libpackage. Those are needed for building the libsolv bootstrap package while for building them we need other bootstrap packages (ICU, libz). This is basically all that's required to build a bootstrap Haiku completely from sources, with a few caveats: * There's no ICU bootstrap recipe yet (so one has to cheat and use the prebuilt package ATM). * Probably doesn't work on Haiku yet (tested on Linux only). * A 32 bit environment must be used (otherwise building the gcc 2 bootstrap package fails). * Building with multiple jobs doesn't work yet, since haikuporter uses common directories for building different packages and there's no explicit serialization yet. * Haven't tested the resulting image save for booting it. So it probably needs a bit more work before it can actually build the final HaikuPorts packages.
2013-07-21 06:10:48 +04:00
bison_bootstrap-2.4.3-1
2015-02-07 18:42:35 +03:00
coreutils_bootstrap-8.22-1
expat_bootstrap-2.1.0-1
expat_bootstrap_devel-2.1.0-1
findutils_bootstrap-4.4.2-1
Integrate building the HaikuPorts bootstrap packages * Add configure option --bootstrap which allows specifying the haikuporter and HaikuPorts repository paths. * Add rules for supporting a second repository type. The PackageRepository rule is now private and RemotePackageRepository is used for remote repositories. The new BootstrapPackageRepository rule is for defining a bootstrap repository (there will probably be only the HaikuPorts cross repository) whose packages can be built as needed via haikuporter. * Rename DownloadPackage to FetchPackage. * Define repository HaikuPortsCross. * HaikuCrossDevel package(s): There are now two sets of packages: A "stage1" set with the same content as before and a final set additionally containing the libraries libbe, libnetwork, libpackage. Those are needed for building the libsolv bootstrap package while for building them we need other bootstrap packages (ICU, libz). This is basically all that's required to build a bootstrap Haiku completely from sources, with a few caveats: * There's no ICU bootstrap recipe yet (so one has to cheat and use the prebuilt package ATM). * Probably doesn't work on Haiku yet (tested on Linux only). * A 32 bit environment must be used (otherwise building the gcc 2 bootstrap package fails). * Building with multiple jobs doesn't work yet, since haikuporter uses common directories for building different packages and there's no explicit serialization yet. * Haven't tested the resulting image save for booting it. So it probably needs a bit more work before it can actually build the final HaikuPorts packages.
2013-07-21 06:10:48 +04:00
flex_bootstrap-2.5.35-1
freetype_bootstrap-2.6.3-1
freetype_bootstrap_devel-2.6.3-1
gawk_bootstrap-3.1.8-2
Integrate building the HaikuPorts bootstrap packages * Add configure option --bootstrap which allows specifying the haikuporter and HaikuPorts repository paths. * Add rules for supporting a second repository type. The PackageRepository rule is now private and RemotePackageRepository is used for remote repositories. The new BootstrapPackageRepository rule is for defining a bootstrap repository (there will probably be only the HaikuPorts cross repository) whose packages can be built as needed via haikuporter. * Rename DownloadPackage to FetchPackage. * Define repository HaikuPortsCross. * HaikuCrossDevel package(s): There are now two sets of packages: A "stage1" set with the same content as before and a final set additionally containing the libraries libbe, libnetwork, libpackage. Those are needed for building the libsolv bootstrap package while for building them we need other bootstrap packages (ICU, libz). This is basically all that's required to build a bootstrap Haiku completely from sources, with a few caveats: * There's no ICU bootstrap recipe yet (so one has to cheat and use the prebuilt package ATM). * Probably doesn't work on Haiku yet (tested on Linux only). * A 32 bit environment must be used (otherwise building the gcc 2 bootstrap package fails). * Building with multiple jobs doesn't work yet, since haikuporter uses common directories for building different packages and there's no explicit serialization yet. * Haven't tested the resulting image save for booting it. So it probably needs a bit more work before it can actually build the final HaikuPorts packages.
2013-07-21 06:10:48 +04:00
grep_bootstrap-2.14-1
icu_bootstrap-54.1-1
icu_bootstrap_devel-54.1-1
Integrate building the HaikuPorts bootstrap packages * Add configure option --bootstrap which allows specifying the haikuporter and HaikuPorts repository paths. * Add rules for supporting a second repository type. The PackageRepository rule is now private and RemotePackageRepository is used for remote repositories. The new BootstrapPackageRepository rule is for defining a bootstrap repository (there will probably be only the HaikuPorts cross repository) whose packages can be built as needed via haikuporter. * Rename DownloadPackage to FetchPackage. * Define repository HaikuPortsCross. * HaikuCrossDevel package(s): There are now two sets of packages: A "stage1" set with the same content as before and a final set additionally containing the libraries libbe, libnetwork, libpackage. Those are needed for building the libsolv bootstrap package while for building them we need other bootstrap packages (ICU, libz). This is basically all that's required to build a bootstrap Haiku completely from sources, with a few caveats: * There's no ICU bootstrap recipe yet (so one has to cheat and use the prebuilt package ATM). * Probably doesn't work on Haiku yet (tested on Linux only). * A 32 bit environment must be used (otherwise building the gcc 2 bootstrap package fails). * Building with multiple jobs doesn't work yet, since haikuporter uses common directories for building different packages and there's no explicit serialization yet. * Haven't tested the resulting image save for booting it. So it probably needs a bit more work before it can actually build the final HaikuPorts packages.
2013-07-21 06:10:48 +04:00
m4_bootstrap-1.4.16-1
make_bootstrap-3.82-1
ncurses6_bootstrap-6.0-1
ncurses6_bootstrap_devel-6.0-1
python_bootstrap-2.7.6-1
Integrate building the HaikuPorts bootstrap packages * Add configure option --bootstrap which allows specifying the haikuporter and HaikuPorts repository paths. * Add rules for supporting a second repository type. The PackageRepository rule is now private and RemotePackageRepository is used for remote repositories. The new BootstrapPackageRepository rule is for defining a bootstrap repository (there will probably be only the HaikuPorts cross repository) whose packages can be built as needed via haikuporter. * Rename DownloadPackage to FetchPackage. * Define repository HaikuPortsCross. * HaikuCrossDevel package(s): There are now two sets of packages: A "stage1" set with the same content as before and a final set additionally containing the libraries libbe, libnetwork, libpackage. Those are needed for building the libsolv bootstrap package while for building them we need other bootstrap packages (ICU, libz). This is basically all that's required to build a bootstrap Haiku completely from sources, with a few caveats: * There's no ICU bootstrap recipe yet (so one has to cheat and use the prebuilt package ATM). * Probably doesn't work on Haiku yet (tested on Linux only). * A 32 bit environment must be used (otherwise building the gcc 2 bootstrap package fails). * Building with multiple jobs doesn't work yet, since haikuporter uses common directories for building different packages and there's no explicit serialization yet. * Haven't tested the resulting image save for booting it. So it probably needs a bit more work before it can actually build the final HaikuPorts packages.
2013-07-21 06:10:48 +04:00
sed_bootstrap-4.2.1-1
texinfo_bootstrap-4.13a-1
zlib_bootstrap-1.2.11-1
zlib_bootstrap_devel-1.2.11-1
build features/bootstrap repo: support secondary arch * Add rule FSplitPackageName. It splits a package name into port name and package suffix. * FSetConditionsHold: Rename to FConditionsHold and replace the set parameter by a predicate rule parameter, thus adding more flexibility. * FIsBuildFeatureEnabled: Use the faster check. * Add rule FQualifiedBuildFeatureName. Given a build feature name, it prepends the current packaging architecture to yield a qualified feature name. Is used by the other build feature rules so that the same build feature can be configured differently for each arch. * ExtractBuildFeatureArchives: The supplied list is now filtered via FFilterByBuildFeatures, allowing for build feature conditions in the list. * Add rule InitArchitectureBuildFeatures. It is called early for each configured architecture, setting up some basic build features for it. "primary" is set for the primary architecture and a "secondary_<arch>" is set for each secondary architecture. * BuildFeatures: Add secondary architecture support: Use the correct paths for libraries and headers (subdir for secondary architecture) and configure the icu and zlib sources only for the primary architecture. * BootstrapPackageRepository: The package lists are now filtered via FFilterByBuildFeatures, allowing for build feature conditions in the lists. * IsPackageAvailable, FetchPackage: Add secondary architecture support. * HaikuPortsCross/x86_gcc2: Add icu and zlib x86 secondary packages. The second stage Haiku cross devel package for the secondary architecture can now be built.
2013-08-05 09:09:45 +04:00
secondary_x86 @{
binutils_bootstrap_x86-2.26.1_2016_02_29-1
expat_bootstrap_x86-2.1.0-1
expat_bootstrap_x86_devel-2.1.0-1
freetype_bootstrap_x86-2.6.3-1
freetype_bootstrap_x86_devel-2.6.3-1
build features/bootstrap repo: support secondary arch * Add rule FSplitPackageName. It splits a package name into port name and package suffix. * FSetConditionsHold: Rename to FConditionsHold and replace the set parameter by a predicate rule parameter, thus adding more flexibility. * FIsBuildFeatureEnabled: Use the faster check. * Add rule FQualifiedBuildFeatureName. Given a build feature name, it prepends the current packaging architecture to yield a qualified feature name. Is used by the other build feature rules so that the same build feature can be configured differently for each arch. * ExtractBuildFeatureArchives: The supplied list is now filtered via FFilterByBuildFeatures, allowing for build feature conditions in the list. * Add rule InitArchitectureBuildFeatures. It is called early for each configured architecture, setting up some basic build features for it. "primary" is set for the primary architecture and a "secondary_<arch>" is set for each secondary architecture. * BuildFeatures: Add secondary architecture support: Use the correct paths for libraries and headers (subdir for secondary architecture) and configure the icu and zlib sources only for the primary architecture. * BootstrapPackageRepository: The package lists are now filtered via FFilterByBuildFeatures, allowing for build feature conditions in the lists. * IsPackageAvailable, FetchPackage: Add secondary architecture support. * HaikuPortsCross/x86_gcc2: Add icu and zlib x86 secondary packages. The second stage Haiku cross devel package for the secondary architecture can now be built.
2013-08-05 09:09:45 +04:00
icu_bootstrap_x86-4.8.1.1-1
icu_bootstrap_x86_devel-4.8.1.1-1
2015-10-18 13:21:26 +03:00
ncurses_bootstrap_x86-6.0-1
ncurses_bootstrap_x86_devel-6.0-1
zlib_bootstrap_x86-1.2.11-1
zlib_bootstrap_x86_devel-1.2.11-1
build features/bootstrap repo: support secondary arch * Add rule FSplitPackageName. It splits a package name into port name and package suffix. * FSetConditionsHold: Rename to FConditionsHold and replace the set parameter by a predicate rule parameter, thus adding more flexibility. * FIsBuildFeatureEnabled: Use the faster check. * Add rule FQualifiedBuildFeatureName. Given a build feature name, it prepends the current packaging architecture to yield a qualified feature name. Is used by the other build feature rules so that the same build feature can be configured differently for each arch. * ExtractBuildFeatureArchives: The supplied list is now filtered via FFilterByBuildFeatures, allowing for build feature conditions in the list. * Add rule InitArchitectureBuildFeatures. It is called early for each configured architecture, setting up some basic build features for it. "primary" is set for the primary architecture and a "secondary_<arch>" is set for each secondary architecture. * BuildFeatures: Add secondary architecture support: Use the correct paths for libraries and headers (subdir for secondary architecture) and configure the icu and zlib sources only for the primary architecture. * BootstrapPackageRepository: The package lists are now filtered via FFilterByBuildFeatures, allowing for build feature conditions in the lists. * IsPackageAvailable, FetchPackage: Add secondary architecture support. * HaikuPortsCross/x86_gcc2: Add icu and zlib x86 secondary packages. The second stage Haiku cross devel package for the secondary architecture can now be built.
2013-08-05 09:09:45 +04:00
}@ # secondary_x86
Integrate building the HaikuPorts bootstrap packages * Add configure option --bootstrap which allows specifying the haikuporter and HaikuPorts repository paths. * Add rules for supporting a second repository type. The PackageRepository rule is now private and RemotePackageRepository is used for remote repositories. The new BootstrapPackageRepository rule is for defining a bootstrap repository (there will probably be only the HaikuPorts cross repository) whose packages can be built as needed via haikuporter. * Rename DownloadPackage to FetchPackage. * Define repository HaikuPortsCross. * HaikuCrossDevel package(s): There are now two sets of packages: A "stage1" set with the same content as before and a final set additionally containing the libraries libbe, libnetwork, libpackage. Those are needed for building the libsolv bootstrap package while for building them we need other bootstrap packages (ICU, libz). This is basically all that's required to build a bootstrap Haiku completely from sources, with a few caveats: * There's no ICU bootstrap recipe yet (so one has to cheat and use the prebuilt package ATM). * Probably doesn't work on Haiku yet (tested on Linux only). * A 32 bit environment must be used (otherwise building the gcc 2 bootstrap package fails). * Building with multiple jobs doesn't work yet, since haikuporter uses common directories for building different packages and there's no explicit serialization yet. * Haven't tested the resulting image save for booting it. So it probably needs a bit more work before it can actually build the final HaikuPorts packages.
2013-07-21 06:10:48 +04:00
:
# repository architecture packages (stage 2)
libsolv_bootstrap-0.3.0_haiku_2014_12_22-1
libsolv_bootstrap_devel-0.3.0_haiku_2014_12_22-1
secondary_x86 @{
libsolv_bootstrap_x86-0.3.0_haiku_2014_12_22-1
libsolv_bootstrap_x86_devel-0.3.0_haiku_2014_12_22-1
}@ # secondary_x86
Integrate building the HaikuPorts bootstrap packages * Add configure option --bootstrap which allows specifying the haikuporter and HaikuPorts repository paths. * Add rules for supporting a second repository type. The PackageRepository rule is now private and RemotePackageRepository is used for remote repositories. The new BootstrapPackageRepository rule is for defining a bootstrap repository (there will probably be only the HaikuPorts cross repository) whose packages can be built as needed via haikuporter. * Rename DownloadPackage to FetchPackage. * Define repository HaikuPortsCross. * HaikuCrossDevel package(s): There are now two sets of packages: A "stage1" set with the same content as before and a final set additionally containing the libraries libbe, libnetwork, libpackage. Those are needed for building the libsolv bootstrap package while for building them we need other bootstrap packages (ICU, libz). This is basically all that's required to build a bootstrap Haiku completely from sources, with a few caveats: * There's no ICU bootstrap recipe yet (so one has to cheat and use the prebuilt package ATM). * Probably doesn't work on Haiku yet (tested on Linux only). * A 32 bit environment must be used (otherwise building the gcc 2 bootstrap package fails). * Building with multiple jobs doesn't work yet, since haikuporter uses common directories for building different packages and there's no explicit serialization yet. * Haven't tested the resulting image save for booting it. So it probably needs a bit more work before it can actually build the final HaikuPorts packages.
2013-07-21 06:10:48 +04:00
:
# source packages
bash_bootstrap
Integrate building the HaikuPorts bootstrap packages * Add configure option --bootstrap which allows specifying the haikuporter and HaikuPorts repository paths. * Add rules for supporting a second repository type. The PackageRepository rule is now private and RemotePackageRepository is used for remote repositories. The new BootstrapPackageRepository rule is for defining a bootstrap repository (there will probably be only the HaikuPorts cross repository) whose packages can be built as needed via haikuporter. * Rename DownloadPackage to FetchPackage. * Define repository HaikuPortsCross. * HaikuCrossDevel package(s): There are now two sets of packages: A "stage1" set with the same content as before and a final set additionally containing the libraries libbe, libnetwork, libpackage. Those are needed for building the libsolv bootstrap package while for building them we need other bootstrap packages (ICU, libz). This is basically all that's required to build a bootstrap Haiku completely from sources, with a few caveats: * There's no ICU bootstrap recipe yet (so one has to cheat and use the prebuilt package ATM). * Probably doesn't work on Haiku yet (tested on Linux only). * A 32 bit environment must be used (otherwise building the gcc 2 bootstrap package fails). * Building with multiple jobs doesn't work yet, since haikuporter uses common directories for building different packages and there's no explicit serialization yet. * Haven't tested the resulting image save for booting it. So it probably needs a bit more work before it can actually build the final HaikuPorts packages.
2013-07-21 06:10:48 +04:00
binutils_bootstrap
bison_bootstrap
coreutils_bootstrap
expat_bootstrap
findutils_bootstrap
Integrate building the HaikuPorts bootstrap packages * Add configure option --bootstrap which allows specifying the haikuporter and HaikuPorts repository paths. * Add rules for supporting a second repository type. The PackageRepository rule is now private and RemotePackageRepository is used for remote repositories. The new BootstrapPackageRepository rule is for defining a bootstrap repository (there will probably be only the HaikuPorts cross repository) whose packages can be built as needed via haikuporter. * Rename DownloadPackage to FetchPackage. * Define repository HaikuPortsCross. * HaikuCrossDevel package(s): There are now two sets of packages: A "stage1" set with the same content as before and a final set additionally containing the libraries libbe, libnetwork, libpackage. Those are needed for building the libsolv bootstrap package while for building them we need other bootstrap packages (ICU, libz). This is basically all that's required to build a bootstrap Haiku completely from sources, with a few caveats: * There's no ICU bootstrap recipe yet (so one has to cheat and use the prebuilt package ATM). * Probably doesn't work on Haiku yet (tested on Linux only). * A 32 bit environment must be used (otherwise building the gcc 2 bootstrap package fails). * Building with multiple jobs doesn't work yet, since haikuporter uses common directories for building different packages and there's no explicit serialization yet. * Haven't tested the resulting image save for booting it. So it probably needs a bit more work before it can actually build the final HaikuPorts packages.
2013-07-21 06:10:48 +04:00
flex_bootstrap
freetype_bootstrap
gawk_bootstrap
gcc_bootstrap
grep_bootstrap
libsolv_bootstrap
m4_bootstrap
make_bootstrap
ncurses6_bootstrap
Integrate building the HaikuPorts bootstrap packages * Add configure option --bootstrap which allows specifying the haikuporter and HaikuPorts repository paths. * Add rules for supporting a second repository type. The PackageRepository rule is now private and RemotePackageRepository is used for remote repositories. The new BootstrapPackageRepository rule is for defining a bootstrap repository (there will probably be only the HaikuPorts cross repository) whose packages can be built as needed via haikuporter. * Rename DownloadPackage to FetchPackage. * Define repository HaikuPortsCross. * HaikuCrossDevel package(s): There are now two sets of packages: A "stage1" set with the same content as before and a final set additionally containing the libraries libbe, libnetwork, libpackage. Those are needed for building the libsolv bootstrap package while for building them we need other bootstrap packages (ICU, libz). This is basically all that's required to build a bootstrap Haiku completely from sources, with a few caveats: * There's no ICU bootstrap recipe yet (so one has to cheat and use the prebuilt package ATM). * Probably doesn't work on Haiku yet (tested on Linux only). * A 32 bit environment must be used (otherwise building the gcc 2 bootstrap package fails). * Building with multiple jobs doesn't work yet, since haikuporter uses common directories for building different packages and there's no explicit serialization yet. * Haven't tested the resulting image save for booting it. So it probably needs a bit more work before it can actually build the final HaikuPorts packages.
2013-07-21 06:10:48 +04:00
python_bootstrap
sed_bootstrap
texinfo_bootstrap
zlib_bootstrap
:
# debuginfo packages
;