haiku/build/jam/BuildFeatureRules

rule FQualifiedBuildFeatureName features
{
	# FQualifiedBuildFeatureName <features>
	#
	# Prepends the name of the current target packaging architecture to the
	# given feature names.

	return $(TARGET_PACKAGING_ARCH):$(features) ;
}


rule FIsBuildFeatureEnabled feature
{
	# FIsBuildFeatureEnabled <feature> ;
	# Returns whether the given build feature <feature> is enabled (if so: "1",
	# if not: empty list).
	#
	# <feature> - The name of the build feature (all lower case).

	feature = [ FQualifiedBuildFeatureName $(feature) ] ;
	return $(HAIKU_BUILD_FEATURE_$(feature:U)_ENABLED) ;
}


rule FMatchesBuildFeatures specification
{
	# FMatchesBuildFeatures <specification> ;
	# Returns whether the given build feature specification <specification>
	# holds. <specification> consists of positive and negative build feature
	# conditions. Conditions can be individual list elements and multiple
	# conditions can be joined, separated by ",", in a single list element. The
	# effect is the same; they are considered as single set of conditions.
	# A positive condition does not start with a "!". It holds when the build
	# feature named by the element is enabled.
	# A negative condition starts with a "!". It holds when the build feature
	# named by the string resulting from removing the leading "!" is not
	# enabled.
	# <specification> holds when it is not empty and
	# * none of the negative conditions it contains hold and
	# * if it contains any positive conditions, at least one one of them holds.
	#
	# <specification> - The build feature specification. A list of individual
	#	conditions or conditions joined by ",".

	local splitSpecification ;
	local element ;
	for element in $(specification) {
		splitSpecification += [ FSplitString $(element) : "," ] ;
	}
	return [ FConditionsHold $(splitSpecification) : FIsBuildFeatureEnabled ] ;
}


rule FFilterByBuildFeatures list
{
	# FFilterByBuildFeatures <list> ;
	# Filters the list annotated by build feature specifications and returns the
	# resulting list. The list can be annotated in two different ways:
	# * A single list element can be annotated by appending "@<specification>"
	#   to it, with <specification> being a build feature specification (a
	#   single comma-separated string). The element appears in the resulting
	#   list, only if <specification> holds.
	# * A sublist can be annotated by enclosing it in "<specification> @{" (two
	#   separate list elements) and "}@", with <specification> being a build
	#   feature specification (a single comma-separated string). The enclosed
	#   sublist appears in the resulting list, only if <specification> holds.
	# The sublist annotations can be nested. The annotations themselves don't
	# appear in the resulting list.
	#
	# <list> - A list annotated with build feature specifications.

	local filteredList ;

	# Since we must look ahead one element to be able to decide whether an
	# element is a regular list element or a features specification for a
	# subsequent "@{". Hence we always process an element other than "@{" and
	# "}@" in the next iteration. We append a dummy element to the list so we
	# don't need special handling for the last element.
	local evaluationStack = 1 ;
	local previousElement ;
	local element ;
	for element in $(list) dummy {
		local stackTop = $(evaluationStack[1]) ;
		local processElement = $(previousElement) ;
		switch $(element) {
			case }@ :
			{
				# Pop the topmost specification off the stack.
				evaluationStack = $(evaluationStack[2-]) ;
				if ! $(evaluationStack) {
					Exit "FFilterByBuildFeatures: Unbalanced @{ in: " $(list) ;
				}

				processElement = $(previousElement) ;
				previousElement = ;
			}
			case @{ :
			{
				if ! $(previousElement) {
					Exit "FFilterByBuildFeatures: No feature specification"
						"after }@ in: " $(list) ;
				}

				if $(evaluationStack[1]) = 1
					&& [ FMatchesBuildFeatures $(previousElement) ] {
					evaluationStack = 1 $(evaluationStack) ;
				} else {
					evaluationStack = 0 $(evaluationStack) ;
				}

				processElement = ;
				previousElement = ;
			}
			case * :
			{
				processElement = $(previousElement) ;
				previousElement = $(element) ;
			}
		}

		if $(processElement) && $(stackTop) = 1 {
			local splitElement = [ Match "(.*)@([^@]*)" : $(processElement) ] ;
			if $(splitElement) {
				if [ FMatchesBuildFeatures $(splitElement[2]) ] {
					filteredList += $(splitElement[1]) ;
				}
			} else {
				filteredList += $(processElement) ;
			}
		}
	}

	if $(evaluationStack[2-]) {
		Exit "FFilterByBuildFeatures: Unbalanced )@ in: " $(list) ;
	}

	return $(filteredList) ;
}


rule EnableBuildFeatures features : specification
{
	# EnableBuildFeatures <features> : <specification> ;
	# Enables the build features <features>, if the build features specification
	# <specification> holds. If <specification> is omitted, the features are
	# enabled unconditionally.
	# The rule enables a build feature by adding its given lower case name to
	# the build variable HAIKU_BUILD_FEATURES and defining a build variable
	# HAIKU_BUILD_FEATURE_<FEATURE>_ENABLED (<FEATURE> being the upper case name
	# of the build feature) to "1".
	#
	# <features> - A list of build feature names (lower case).
	# <specification> - An optional build features specification (cf.
	#	FMatchesBuildFeatures).

	features = [ FQualifiedBuildFeatureName $(features) ] ;

	if ! $(HAIKU_BUILD_FEATURE_$(feature:U)_ENABLED)
		&& ( ! $(specification)
			|| [ FMatchesBuildFeatures $(specification) ] ) {
		local feature ;
		for feature in $(features) {
			HAIKU_BUILD_FEATURES += $(feature) ;
			HAIKU_BUILD_FEATURE_$(feature:U)_ENABLED = 1 ;
		}
	}
}


rule BuildFeatureObject feature
{
	# BuildFeatureObject <feature> ;
	# Returns a unique object for the given build feature. It is used for
	# attaching attribute values to it.

	feature = [ FQualifiedBuildFeatureName $(feature) ] ;

	local featureObject = $(HAIKU_BUILD_FEATURE_$(feature:U)) ;
	if ! $(featureObject) {
		featureObject = [ NewUniqueTarget ] ;
		HAIKU_BUILD_FEATURE_$(feature:U) = $(featureObject) ;
	}

	return $(featureObject) ;
}


rule SetBuildFeatureAttribute feature : attribute : values : package
{
	# SetBuildFeatureAttribute <feature> : <attribute> : <values>
	#	[ : <package> ] ;
	# Sets attribute <attribute> of a build feature <feature> to value <values>.
	# If <package> is specified, it names the package the attribute belongs to.

	local featureObject = [ BuildFeatureObject $(feature) ] ;
	HAIKU_ATTRIBUTE_$(attribute) on $(featureObject) = $(values) ;
	if $(package) {
		HAIKU_ATTRIBUTE_$(attribute):package on $(featureObject) = $(package) ;
	}
}


rule BuildFeatureAttribute feature : attribute : flags
{
	# BuildFeatureAttribute <feature> : <attribute> [ : <flags> ] ;
	# Returns the value of attribute <attribute> of a build feature <feature>.
	# Flags can be a list of flags which influence the returned value. Currently
	# only flag "path" is defined, which will convert the attribute value --
	# which is assumed to be a list of (gristed) targets with a path relative to
	# the extraction directory of the build feature archive files -- to paths.
	# A typical example is the "headers" attribute, whose value can be used as
	# dependency, but which must be converted to a path to be a valid headers
	# search path.

	local featureObject = [ BuildFeatureObject $(feature) ] ;
	local values
		= [ on $(featureObject) return $(HAIKU_ATTRIBUTE_$(attribute)) ] ;
	if path in $(flags) {
		# get the attribute's package and the corresponding extraction dir
		local package
			= [ BuildFeatureAttribute $(feature) : $(attribute):package ] ;
		local directory ;
		if $(package) {
			directory = [ BuildFeatureAttribute $(feature)
				: $(package):directory ] ;
		}

		# translate the values
		local paths ;
		local value ;
		for value in $(values:G=) {
			paths += [ FDirName $(directory) $(value) ] ;
		}
		values = $(paths) ;
	}

	return $(values) ;
}


rule ExtractBuildFeatureArchivesExpandValue value : fileName
{
	if ! $(value) {
		return $(value) ;
	}

	# split the value
	local splitValue ;
	while $(value) {
		local components = [ Match "([^%]*)(%[^%]*%)(.*)" : $(value) ] ;
		if ! $(components) {
			splitValue += $(value) ;
			break ;
		}

		if $(components[1]) {
			splitValue += $(components[1]) ;
		}
		splitValue += $(components[2]) ;
		value = $(components[3]) ;
	}

	# reassemble the value, performing the substitutions
	local %packageName% ;
	local %portName% ;
	local %packageFullVersion% ;
	value = "" ;
	while $(splitValue) {
		local component = $(splitValue[1]) ;
		splitValue = $(splitValue[2-]) ;
		switch $(component) {
			case %packageRevisionedName% :
				splitValue = %packageName% "-" %packageFullVersion%
					$(splitValue) ;

			case %portRevisionedName% :
				splitValue = %portName% "-" %packageFullVersion% $(splitValue) ;

			case %*% :
				if ! x$(%packageName%) {
					# extract package name and version from file name
					local splitName
						= [ Match "([^-]*)-(.*).hpkg" : $(fileName) ] ;
					if $(splitName) {
						%packageName% = $(splitName[1]) ;
						%packageFullVersion%
							= [ Match "([^-]*-[^-]*)-.*" : $(splitName[2]) ] ;
						if ! $(packageFullVersion%) {
							packageFullVersion% = $(splitName[2]) ;
						}
					} else {
						%packageName% = [ Match "(.*).hpkg" : $(fileName) ] ;
						if ! $(%packageName%) {
							%packageName% = $(fileName) ;
						}
						%packageFullVersion% = "" ;
					}

					# get the port name from the package name
					splitName = [ FSplitPackageName $(%packageName%) ] ;
					%portName% = $(splitName[1]) ;
				}

				value = "$(value)$($(component):E=)" ;

			case * :
				value = "$(value)$(component)" ;
		}
	}

	return $(value) ;
}


rule ExtractBuildFeatureArchives feature : list
{
	# ExtractBuildFeatureArchives <feature> : <list> ;
	# Downloads and extracts one or more archives for build feature <feature>
	# and sets attributes for the build feature to extracted entries. The syntax
	# for <list> is:
	# "file:" <packageAlias> <packageName>
	#    <attribute>: <value> ...
	#    ...
	# "file:" <packageAlias2> <packageName2>
	# ...
	#
	# <packageAlias> specifies a short name for the archive (e.g. "base" for the
	# base package, "devel" for the development package, etc.), <packageName>
	# the unversioned name of the package (e.g. "libsolv_devel").
	# <attribute> can be any name and <value> any relative path in the
	# extraction directory. The following placeholders in <value> will be
	# replaced with the respective value:
	# * %packageName% is replaced with the name of the package as extracted from
	#   the package file name (may differ from the specified package name e.g.
	#   for bootstrap packages).
	# * %portName% is replaced with the name of the port the package belongs to.
	#   That is %packageName% with any well-known package type suffix ("_devel",
	#   "_source", etc.) removed.
	# * %packageFullVersion% is replaced with the the full version string of the
	#   package (i.e. including the revision) as extracted frmo the package file
	#   name.
	# * %packageRevisionedName% is replaced with what
	#   %packageName%-%packageFullVersion% would be replaced.
	# * %portRevisionedName% is replaced with what
	#   %portName%-%packageFullVersion% would be replaced.
	#
	# The attribute with the name "depends" will be handled specially. Its
	# <value> specifies the name of a package the current package depends on
	# (e.g. "devel" typically depends on "base"). If such a dependency is
	# specified the current package will be extracted to the same directory as
	# the package it depends on. The "depends" attribute must precede any other
	# attribute for the package.
	#
	# The rule also sets the build feature attribute "<packageAlias>:directory"
	# to the extraction directory for each package.

	local qualifiedFeature = [ FQualifiedBuildFeatureName $(feature) ] ;
	list = [ FFilterByBuildFeatures $(list) ] ;

	while $(list) {
		if $(list[1]) != file: {
			Exit "ExtractBuildFeatureArchives: Expected \"file: ...\", got:"
				$(list) ;
		}

		local package = $(list[2]) ;
		local file = [ FetchPackage $(list[3]) ] ;
		local fileName = $(file:BS) ;
		list = $(list[4-]) ;

		local directory = [ FDirName $(HAIKU_OPTIONAL_BUILD_PACKAGES_DIR)
			$(fileName:B) ] ;
		directory = $(directory:G=$(package)) ;

		while $(list) {
			local attribute = [ Match "(.*):" : $(list[1]) ] ;
			if ! $(attribute) {
				Exit "ExtractBuildFeatureArchives: Expected attribute, got:"
					$(list) ;
			}
			if $(attribute) = file {
				break ;
			}

			list = $(list[2-]) ;

			local values ;

			while $(list) {
				switch $(list[1]) {
					case *: :
					{
						break ;
					}
					case * :
					{
						values += [ ExtractBuildFeatureArchivesExpandValue
							$(list[1]) : $(fileName) ] ;
						list = $(list[2-]) ;
					}
				}
			}

			if $(attribute) = depends {
				# Inherit the extraction directory (with a different grist) and
				# depend on the extraction directory of the base package.
				local basePackage = $(values[1]) ;
				local baseDirectory = [ BuildFeatureAttribute $(feature)
					: $(basePackage):directory ] ;
				directory = $(baseDirectory:G=$(package)) ;
				Depends $(directory) : $(directory:G=$(basePackage)) ;
			} else {
				SetBuildFeatureAttribute $(feature) : $(attribute)
					: [ ExtractArchive $(directory)
						: $(values) : $(file)
						: extracted-$(qualifiedFeature)-$(package) ] ;
				SetBuildFeatureAttribute $(feature) : $(attribute):package
					: $(package) ;
			}
		}

		SetBuildFeatureAttribute $(feature) : $(package):directory
			: $(directory:G=) ;
	}
}


rule InitArchitectureBuildFeatures architecture
{
	# InitArchitectureBuildFeatures <architecture> ;
	#
	# Enable the build features that can be derived directly from the
	# architecture.

	# The build feature rule use TARGET_PACKAGING_ARCH, so set that temporarily.
	local savedArchitecture = $(TARGET_PACKAGING_ARCH) ;
	TARGET_PACKAGING_ARCH = $(architecture) ;

	# Add the target architecture as a build feature.
	EnableBuildFeatures $(TARGET_ARCH_$(architecture)) ;

	# For the primary architecture add the "primary" build feature.
	if $(architecture) = $(TARGET_PACKAGING_ARCHS[1]) {
		EnableBuildFeatures primary ;
	}

	# Add all secondary architectures as build features (with prefix).
	EnableBuildFeatures secondary_$(TARGET_PACKAGING_ARCHS[2-]) ;

	if $(TARGET_GCC_VERSION_$(architecture)[1]) = 2 {
		EnableBuildFeatures gcc2 ;
	}

	TARGET_PACKAGING_ARCH = $(savedArchitecture) ;
}