haiku/docs/user/support/BufferIO.dox

245 lines
7.1 KiB
Plaintext
Raw Normal View History

/*
* Copyright 2007-2014 Haiku, Inc. All rights reserved.
* Distributed under the terms of the MIT License.
*
* Authors:
* Stefano Ceccherini, burton666@libero.it
* Niels Sascha Reedijk, niels.reedijk@gmail.com
* John Scipione, jscipione@gmail.com
*
* Corresponds to:
* headers/os/support/BufferIO.h rev 38225
* src/kits/support/BufferIO.cpp rev 44862
*/
/*!
\file BufferIO.h
\ingroup support
\ingroup libbe
\brief Provides the BBufferIO class.
*/
/*!
\class BBufferIO
\ingroup support
\ingroup libbe
\brief A buffered adapter for BPositionIO objects.
This class differs from other classes derived from BPositionIO in a sense
that it does not actually provide an actual entity to be read or written
to, but rather acts like a "frontend" to a stream. This class especially
comes in handy when working with files that are constantly written and
rewritten and where you want do this writing buffered so that the hard
disk or the network will not have to be accessed so frequently.
This class works as follows. After constructing a BBufferIO object that
you want to be buffered, you can create this object. The constructor
takes a \a stream parameter that points to the object to be buffered.
You then use this object as a proxy to the resource you want to read
of or write to. As soon as you use ReadAt(), the buffer will be
initialized to the contents of the original stream, and subsequent calls
to the positions within the buffer will not be routed to the original
stream. In the same way WriteAt() will change the data in the buffer,
but not in the actual stream. In order to flush the changes to the
original stream, use the Flush() method. Deleting the object when you are
done with it will also flush the stream and update the original stream.
\note This class is not meant to be used in cases where the
original stream requires to be in a consistent state. Neither should
this class be used as a way to perform 'atomic' writes, because the
object might need to do partial writes if it needs to 'move' the
buffer. This happens for instance if the original stream is bigger
than the buffer.
\since Haiku R1
*/
/*!
\fn BBufferIO::BBufferIO(BPositionIO* stream, size_t bufferSize,
bool ownsStream)
\brief Initialize a BBufferIO object.
The constructor will create a buffer of the given size
and associate the object with the given BPositionIO stream.
\param stream A pointer to a BPositionIO object.
\param bufferSize The size of the buffer that the object will allocate and
use.
\param ownsStream Specifies if the object will delete the stream on
destruction.
\since Haiku R1
*/
/*!
\fn BBufferIO::~BBufferIO()
\brief Free the resources allocated by the object
Flush pending changes to the stream and free the allocated memory.
If the \c owns_stream property is \c true, the destructor also
deletes the stream associated with the BBufferIO object.
\since Haiku R1
*/
/*!
\fn ssize_t BBufferIO::ReadAt(off_t pos, void* buffer, size_t size)
\brief Read the specified amount of bytes at the given position.
\param pos The offset into the stream where to read.
\param buffer A pointer to a buffer where to copy the read data.
\param size The amount of bytes to read.
\return The amount of bytes actually read, or an error code.
\retval B_NO_INIT The object is not associated with a valid BPositionIO
stream.
\retval B_BAD_VALUE The \c buffer parameter is not valid.
\since Haiku R1
*/
/*!
\fn ssize_t BBufferIO::WriteAt(off_t pos, const void *buffer, size_t size)
\brief Write the specified amount of bytes at the given position.
\param pos The offset into the stream where to write.
\param buffer A pointer to a buffer which contains the data to write.
\param size The amount of bytes to write.
\return The amount of bytes actually written, or an error code.
\retval B_NO_INIT The object is not associated with a valid BPositionIO
stream.
\retval B_BAD_VALUE The \c buffer parameter is not valid.
\since Haiku R1
*/
/*!
\fn off_t BBufferIO::Seek(off_t position, uint32 seekMode)
\brief Set the position in the stream.
Set the position in the stream where the Read() and Write() functions
(inherited from BPositionIO) begin reading and writing.
How the position argument is understood depends on the seek_mode flag.
\param position The position where you want to seek.
\param seekMode Can have three values:
- \c SEEK_SET The position passed is an offset from the beginning
of the stream; in other words, the current position is set to
position. For this mode, position should be a positive value.
- \c SEEK_CUR The position argument is an offset from the current
position; the value of the argument is added to the current
position.
- \c SEEK_END. The position argument is an offset from the end of
the stream. In this mode the position argument should be negative
(or zero).
\return The current position as an offset in bytes from the beginning of
the stream.
\retval B_NO_INIT The object is not associated with a valid BPositionIO
stream.
\since Haiku R1
*/
/*!
\fn off_t BBufferIO::Position() const
\brief Return the current position in the stream.
\return The current position as an offset in bytes
from the beginning of the stream.
\retval B_NO_INIT The object is not associated with a valid BPositionIO
stream.
\since Haiku R1
*/
/*!
\fn status_t BBufferIO::SetSize(off_t size)
\brief Call the SetSize() function of the assigned BPositionIO stream.
\param size The new size of the BPositionIO object.
\returns A status code.
\retval B_OK The stream is resized.
\retval B_NO_INIT The object is not associated with a valid BPositionIO
stream.
\since Haiku R1
*/
/*!
\fn status_t BBufferIO::Flush()
\brief Write pending modifications to the stream.
\return The amount of bytes written, or if it failed it will return an
error code.
\since Haiku R1
*/
/*!
\fn BPositionIO* BBufferIO::Stream() const
\brief Return a pointer to the stream specified on construction.
\return A pointer to the BPositionIO stream specified on construction.
\since Haiku R1
*/
/*!
\fn size_t BBufferIO::BufferSize() const
\brief Return the size of the internal buffer.
\return The size of the buffer allocated by the object.
\since Haiku R1
*/
/*!
\fn bool BBufferIO::OwnsStream() const
\brief Return whether or not the BBufferIO object "owns" the stream.
\return Whether or not the BBufferIO object "owns" the stream.
\retval true The object "owns" the stream and will destroy it upon
destruction.
\retval false The object does not own the stream.
\see SetOwnsStream()
\since Haiku R1
*/
/*!
\fn void BBufferIO::SetOwnsStream(bool owns_stream)
\brief Set the \c owns_stream property of the object.
\param owns_stream If you pass \c true, the object will delete the stream
upon destruction, if you pass \c false it will not.
\since Haiku R1
*/
/*!
\fn void BBufferIO::PrintToStream() const
\brief Print the object to standard output.
\since Haiku R1
*/