NetBSD/sys/arch/sparc64/dev/bwtwo.c
eeh 1884f05354 Another general cleanup:
Remove the entire idea of fasttrap interrupts since V9 traps are really cheap,
the CPUs are really fast, and the completely different trap frames would make
these handlers really difficult to implement.

pmap_changeprot() was only used by the clock and one other place; deprecate it.

probeget() and probeset() now take 64-bit addresses even in 32-bit mode so we
can probe IO locations by physical addresses.

Some pmap cleanup.

Some more copyright cleanup.
1999-06-07 05:28:03 +00:00

528 lines
12 KiB
C

/* $NetBSD: bwtwo.c,v 1.8 1999/06/07 05:28:03 eeh Exp $ */
/*
* Copyright (c) 1996 Jason R. Thorpe. All rights reserved.
* Copyright (c) 1992, 1993
* The Regents of the University of California. All rights reserved.
*
* This software was developed by the Computer Systems Engineering group
* at Lawrence Berkeley Laboratory under DARPA contract BG 91-66 and
* contributed to Berkeley.
*
* All advertising materials mentioning features or use of this software
* must display the following acknowledgement:
* This product includes software developed by the University of
* California, Lawrence Berkeley Laboratory.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in the
* documentation and/or other materials provided with the distribution.
* 3. All advertising materials mentioning features or use of this software
* must display the following acknowledgement:
* This product includes software developed by the University of
* California, Berkeley and its contributors.
* 4. Neither the name of the University nor the names of its contributors
* may be used to endorse or promote products derived from this software
* without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE REGENTS AND CONTRIBUTORS ``AS IS'' AND
* ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
* ARE DISCLAIMED. IN NO EVENT SHALL THE REGENTS OR CONTRIBUTORS BE LIABLE
* FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
* OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
* HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
* OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
* SUCH DAMAGE.
*
* @(#)bwtwo.c 8.1 (Berkeley) 6/11/93
*/
/*
* black&white display (bwtwo) driver.
*
* Does not handle interrupts, even though they can occur.
*
* P4 and overlay plane support by Jason R. Thorpe <thorpej@NetBSD.ORG>.
* Overlay plane handling hints and ideas provided by Brad Spencer.
*/
#include <sys/param.h>
#include <sys/systm.h>
#include <sys/device.h>
#include <sys/ioctl.h>
#include <sys/malloc.h>
#include <sys/mman.h>
#include <sys/tty.h>
#include <sys/conf.h>
#include <vm/vm.h>
#include <machine/fbio.h>
#include <machine/autoconf.h>
#include <machine/pmap.h>
#include <machine/fbvar.h>
#include <machine/eeprom.h>
#include <machine/ctlreg.h>
#include <machine/conf.h>
#include <sparc64/dev/btreg.h>
#include <sparc64/dev/bwtworeg.h>
#include <dev/sbus/sbusvar.h>
#if defined(SUN4)
#include <sparc64/dev/pfourreg.h>
#endif
/* per-display variables */
struct bwtwo_softc {
struct device sc_dev; /* base device */
struct sbusdev sc_sd; /* sbus device */
struct fbdevice sc_fb; /* frame buffer device */
volatile struct fbcontrol *sc_reg;/* control registers */
struct rom_reg sc_phys; /* phys address description */
int sc_bustype; /* type of bus we live on */
int sc_pixeloffset; /* offset to framebuffer */
#if defined(SUN4)
/*
* Additional overlay plane goo.
*/
int sc_ovtype; /* what kind of color fb? */
#define BWO_NONE 0x00
#define BWO_CGFOUR 0x01
#define BWO_CGEIGHT 0x02
#endif
};
/* autoconfiguration driver */
static void bwtwoattach __P((struct device *, struct device *, void *));
static int bwtwomatch __P((struct device *, struct cfdata *, void *));
static void bwtwounblank __P((struct device *));
static void bwtwo_set_video __P((struct bwtwo_softc *, int));
static int bwtwo_get_video __P((struct bwtwo_softc *));
/* cdevsw prototypes */
cdev_decl(bwtwo);
struct cfattach bwtwo_ca = {
sizeof(struct bwtwo_softc), bwtwomatch, bwtwoattach
};
struct cfdriver bwtwo_cd = {
NULL, "bwtwo", DV_DULL
};
/* XXX we do not handle frame buffer interrupts (do not know how) */
/* frame buffer generic driver */
static struct fbdriver bwtwofbdriver = {
bwtwounblank, bwtwoopen, bwtwoclose, bwtwoioctl, bwtwopoll, bwtwommap
};
extern int fbnode;
extern struct tty *fbconstty;
/*
* Match a bwtwo.
*/
int
bwtwomatch(parent, cf, aux)
struct device *parent;
struct cfdata *cf;
void *aux;
{
struct confargs *ca = aux;
struct romaux *ra = &ca->ca_ra;
if (CPU_ISSUN4 && cf->cf_unit != 0)
return (0);
if (strcmp(cf->cf_driver->cd_name, ra->ra_name))
return (0);
/*
* Mask out invalid flags from the user.
*/
cf->cf_flags &= FB_USERMASK;
if (ca->ca_bustype == BUS_SBUS)
return(1);
/*
* Make sure there's hardware there.
*/
if (probeget(ra->ra_vaddr, ASI_PRIMARY, 4) == -1)
return (0);
#if defined(SUN4)
if (CPU_ISSUN4 && (ca->ca_bustype == BUS_OBIO)) {
/*
* Check for a pfour framebuffer.
*/
switch (fb_pfour_id(ra->ra_vaddr)) {
case PFOUR_ID_BW:
case PFOUR_ID_COLOR8P1: /* bwtwo in ... */
case PFOUR_ID_COLOR24: /* ...overlay plane */
cf->cf_flags |= FB_PFOUR;
/* FALLTHROUGH */
case PFOUR_NOTPFOUR:
return (1);
default:
return (0);
}
}
#endif
return (0);
}
/*
* Attach a display. We need to notice if it is the console, too.
*/
void
bwtwoattach(parent, self, args)
struct device *parent, *self;
void *args;
{
register struct bwtwo_softc *sc = (struct bwtwo_softc *)self;
register struct confargs *ca = args;
register int node = ca->ca_ra.ra_node, ramsize;
struct fbdevice *fb = &sc->sc_fb;
int isconsole = 0;
int sbus = 1;
char *nam = NULL;
fb->fb_driver = &bwtwofbdriver;
fb->fb_device = &sc->sc_dev;
fb->fb_type.fb_type = FBTYPE_SUN2BW;
fb->fb_flags = sc->sc_dev.dv_cfdata->cf_flags;
/*
* Map the control register.
*/
if (fb->fb_flags & FB_PFOUR) {
fb->fb_pfour = (volatile u_int32_t *)
mapiodev(ca->ca_ra.ra_reg, 0, sizeof(u_int32_t));
sc->sc_reg = NULL;
} else {
sc->sc_reg = (volatile struct fbcontrol *)
mapiodev(ca->ca_ra.ra_reg, BWREG_REG,
sizeof(struct fbcontrol));
fb->fb_pfour = NULL;
}
/* Set up default pixel offset. May be changed below. */
sc->sc_pixeloffset = BWREG_MEM;
switch (ca->ca_bustype) {
case BUS_OBIO:
if (CPU_ISSUN4M) /* 4m has framebuffer on obio */
goto obp_name;
sbus = node = 0;
#if defined(SUN4)
if (fb->fb_flags & FB_PFOUR) {
nam = "bwtwo/p4";
/*
* Notice if this is an overlay plane on a color
* framebuffer. Note that PFOUR_COLOR_OFF_OVERLAY
* is the same as PFOUR_BW_OFF, but we use the
* different names anyway.
*/
switch (PFOUR_ID(*fb->fb_pfour)) {
case PFOUR_ID_COLOR8P1:
sc->sc_ovtype = BWO_CGFOUR;
sc->sc_pixeloffset = PFOUR_COLOR_OFF_OVERLAY;
break;
case PFOUR_ID_COLOR24:
sc->sc_ovtype = BWO_CGEIGHT;
sc->sc_pixeloffset = PFOUR_COLOR_OFF_OVERLAY;
break;
default:
sc->sc_ovtype = BWO_NONE;
sc->sc_pixeloffset = PFOUR_BW_OFF;
break;
}
} else
#endif
nam = "bwtwo";
break;
case BUS_VME32:
case BUS_VME16:
sbus = node = 0;
nam = "bwtwo";
break;
case BUS_SBUS:
obp_name:
#if defined(SUN4C) || defined(SUN4M)
nam = getpropstring(node, "model");
#endif
break;
}
sc->sc_phys = ca->ca_ra.ra_reg[0];
sc->sc_bustype = ca->ca_bustype;
fb->fb_type.fb_depth = 1;
fb_setsize(fb, fb->fb_type.fb_depth, 1152, 900, node, ca->ca_bustype);
ramsize = fb->fb_type.fb_height * fb->fb_linebytes;
fb->fb_type.fb_cmsize = 0;
fb->fb_type.fb_size = ramsize;
printf(": %s, %d x %d", nam,
fb->fb_type.fb_width, fb->fb_type.fb_height);
#if defined(SUN4)
if (CPU_ISSUN4) {
struct eeprom *eep = (struct eeprom *)eeprom_va;
int constype = (fb->fb_flags & FB_PFOUR) ? EE_CONS_P4OPT :
EE_CONS_BW;
/*
* Assume this is the console if there's no eeprom info
* to be found.
*/
if (eep == NULL || eep->eeConsole == constype)
isconsole = (fbconstty != NULL);
else
isconsole = 0;
}
#endif
if (CPU_ISSUN4COR4M)
isconsole = (node == fbnode);
/*
* When the ROM has mapped in a bwtwo display, the address
* maps only the video RAM, hence we always map the control
* registers ourselves. We only need the video RAM if we are
* going to print characters via rconsole.
*/
if ((fb->fb_pixels = ca->ca_ra.ra_vaddr) == NULL && isconsole) {
/* this probably cannot happen (on sun4c), but what the heck */
fb->fb_pixels =
mapiodev(ca->ca_ra.ra_reg, sc->sc_pixeloffset, ramsize);
}
/* Insure video is enabled */
bwtwo_set_video(sc, 1);
if (isconsole) {
printf(" (console)\n");
#ifdef RASTERCONSOLE
#if defined(SUN4)
/*
* XXX rcons doesn't seem to work properly on the overlay
* XXX plane. This is a temporary kludge until someone
* XXX fixes it.
*/
if ((fb->fb_flags & FB_PFOUR) == 0 ||
(sc->sc_ovtype == BWO_NONE))
#endif
fbrcons_init(fb);
#endif
} else
printf("\n");
#if defined(SUN4C) || defined(SUN4M)
if (sbus)
sbus_establish(&sc->sc_sd, &sc->sc_dev);
#endif
#if defined(SUN4)
if ((fb->fb_flags & FB_PFOUR) && (sc->sc_ovtype != BWO_NONE)) {
char *ovnam;
switch (sc->sc_ovtype) {
case BWO_CGFOUR:
ovnam = "cgfour";
break;
case BWO_CGEIGHT:
ovnam = "cgeight";
break;
default:
ovnam = "unknown";
break;
}
printf("%s: %s overlay plane\n", sc->sc_dev.dv_xname, ovnam);
}
#endif
if (CPU_ISSUN4 || node == fbnode) {
#if defined(SUN4)
/*
* If we're on an overlay plane of a color framebuffer,
* then we don't force the issue in fb_attach() because
* we'd like the color framebuffer to actually be the
* "console framebuffer". We're only around to speed
* up rconsole.
*/
if ((fb->fb_flags & FB_PFOUR) && (sc->sc_ovtype != BWO_NONE ))
fb_attach(fb, 0);
else
#endif
fb_attach(fb, isconsole);
}
}
int
bwtwoopen(dev, flags, mode, p)
dev_t dev;
int flags, mode;
struct proc *p;
{
int unit = minor(dev);
if (unit >= bwtwo_cd.cd_ndevs || bwtwo_cd.cd_devs[unit] == NULL)
return (ENXIO);
return (0);
}
int
bwtwoclose(dev, flags, mode, p)
dev_t dev;
int flags, mode;
struct proc *p;
{
return (0);
}
int
bwtwoioctl(dev, cmd, data, flags, p)
dev_t dev;
u_long cmd;
caddr_t data;
int flags;
struct proc *p;
{
struct bwtwo_softc *sc = bwtwo_cd.cd_devs[minor(dev)];
switch (cmd) {
case FBIOGTYPE:
*(struct fbtype *)data = sc->sc_fb.fb_type;
break;
case FBIOGVIDEO:
*(int *)data = bwtwo_get_video(sc);
break;
case FBIOSVIDEO:
bwtwo_set_video(sc, (*(int *)data));
break;
default:
return (ENOTTY);
}
return (0);
}
static void
bwtwounblank(dev)
struct device *dev;
{
struct bwtwo_softc *sc = (struct bwtwo_softc *)dev;
bwtwo_set_video(sc, 1);
}
int
bwtwopoll(dev, events, p)
dev_t dev;
int events;
struct proc *p;
{
return (seltrue(dev, events, p));
}
/*
* Return the address that would map the given device at the given
* offset, allowing for the given protection, or return -1 for error.
*/
int
bwtwommap(dev, off, prot)
dev_t dev;
int off, prot;
{
register struct bwtwo_softc *sc = bwtwo_cd.cd_devs[minor(dev)];
if (off & PGOFSET)
panic("bwtwommap");
if ((unsigned)off >= sc->sc_fb.fb_type.fb_size)
return (-1);
/*
* I turned on PMAP_NC here to disable the cache as I was
* getting horribly broken behaviour with it on.
*/
return (REG2PHYS(&sc->sc_phys, sc->sc_pixeloffset + off) | PMAP_NC);
}
static int
bwtwo_get_video(sc)
struct bwtwo_softc *sc;
{
#if defined(SUN4)
if (CPU_ISSUN4 && (sc->sc_bustype == BUS_OBIO)) {
if (sc->sc_fb.fb_flags & FB_PFOUR) {
/*
* This handles the overlay plane case, too.
*/
return (fb_pfour_get_video(&sc->sc_fb));
} else
return ((lduba(AC_SYSENABLE,
ASI_CONTROL) & SYSEN_VIDEO) != 0);
}
#endif
return ((sc->sc_reg->fbc_ctrl & FBC_VENAB) != 0);
}
static void
bwtwo_set_video(sc, enable)
struct bwtwo_softc *sc;
int enable;
{
#if defined(SUN4)
if (CPU_ISSUN4 && (sc->sc_bustype == BUS_OBIO)) {
if (sc->sc_fb.fb_flags & FB_PFOUR) {
/*
* This handles the overlay plane case, too.
*/
fb_pfour_set_video(&sc->sc_fb, enable);
return;
}
if (enable)
stba(AC_SYSENABLE, ASI_CONTROL,
lduba(AC_SYSENABLE, ASI_CONTROL) | SYSEN_VIDEO);
else
stba(AC_SYSENABLE, ASI_CONTROL,
lduba(AC_SYSENABLE, ASI_CONTROL) & ~SYSEN_VIDEO);
return;
}
#endif
if (enable)
sc->sc_reg->fbc_ctrl |= FBC_VENAB;
else
sc->sc_reg->fbc_ctrl &= ~FBC_VENAB;
}