NetBSD/sys/dev/sbus/dbrivar.h

189 lines
5.6 KiB
C

/* $NetBSD: dbrivar.h,v 1.11 2009/09/17 16:28:12 tsutsui Exp $ */
/*
* Copyright (C) 1997 Rudolf Koenig (rfkoenig@immd4.informatik.uni-erlangen.de)
* Copyright (c) 1998, 1999 Brent Baccala (baccala@freesoft.org)
* Copyright (c) 2001, 2002 Jared D. McNeill <jmcneill@netbsd.org>
* Copyright (c) 2005 Michael Lorenz <macallan@netbsd.org>
* All rights reserved.
*
* This driver is losely based on a Linux driver written by Rudolf Koenig and
* Brent Baccala who kindly gave their permission to use their code in a
* BSD-licensed driver.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in the
* documentation and/or other materials provided with the distribution.
*
* THIS SOFTWARE IS PROVIDED BY THE AUTHORS ``AS IS'' AND ANY EXPRESS OR
* IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES
* OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.
* IN NO EVENT SHALL THE AUTHORS BE LIABLE FOR ANY DIRECT, INDIRECT,
* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
* BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF
* USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
* THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
* (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
* THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
*
*/
#ifndef DBRI_VAR_H
#define DBRI_VAR_H
#define DBRI_NUM_COMMANDS 64
#define DBRI_NUM_DESCRIPTORS 32
#define DBRI_INT_BLOCKS 64
#define DBRI_PIPE_MAX 32
enum direction {
in,
out
};
/* DBRI DMA transmit descriptor */
struct dbri_xmit {
volatile uint32_t flags;
#define TX_EOF 0x80000000 /* End of frame marker */
#define TX_BCNT(x) ((x&0x3fff)<<16)
#define TX_BINT 0x00008000 /* interrupt when EOF */
#define TX_MINT 0x00004000 /* marker interrupt */
#define TX_IDLE 0x00002000 /* send idles after data */
#define TX_FCNT(x) (x&0x1fff)
volatile uint32_t ba; /* tx/rx buffer address */
volatile uint32_t nda; /* next descriptor address */
volatile uint32_t status;
#define TS_OK 0x0001 /* transmission completed */
#define TS_ABORT 0x0004 /* transmission aborted */
#define TS_UNDERRUN 0x0008 /* DMA underrun */
};
struct dbri_recv {
volatile uint32_t status;
#define RX_EOF 0x80000000
#define RX_COMPLETED 0x40000000
#define RX_BCNT(x) ((x & 0x3fff) << 16)
#define RX_CRCERROR 0x00000080
#define RX_BBC 0x00000040 /* bad byte count */
#define RX_ABORT 0x00000020
#define RX_OVERRUN 0x00000008
volatile uint32_t ba;
volatile uint32_t nda;
volatile uint32_t flags;
#define RX_BSIZE(x) (x & 0x3fff)
#define RX_FINAL 0x00008000
#define RX_MARKER 0x00004000
};
struct dbri_pipe {
uint32_t sdp; /* SDP command word */
enum direction direction;
int next; /* next pipe in linked list */
int prev; /* previous pipe in linked list */
int cycle; /* offset of timeslot (bits) */
int length; /* length of timeslot (bits) */
int desc; /* index of active descriptor */
volatile uint32_t *prec; /* pointer to received fixed data */
};
struct dbri_desc {
int busy;
void * buf; /* cpu view of buffer */
void * buf_dvma; /* device view */
bus_addr_t dmabase;
bus_dma_segment_t dmaseg;
bus_dmamap_t dmamap;
size_t len;
void (*callback)(void *);
void *callback_args;
void *softint;
};
struct dbri_dma {
volatile uint32_t command[DBRI_NUM_COMMANDS];
volatile int32_t intr[DBRI_INT_BLOCKS];
struct dbri_xmit xmit[DBRI_NUM_DESCRIPTORS];
struct dbri_recv recv[DBRI_NUM_DESCRIPTORS];
};
struct dbri_softc {
device_t sc_dev; /* base device */
bus_space_handle_t sc_ioh;
bus_space_tag_t sc_iot;
/* DMA buffer for sending commands to the chip */
bus_dma_tag_t sc_dmat;
bus_dmamap_t sc_dmamap;
bus_dma_segment_t sc_dmaseg;
int sc_have_powerctl;
int sc_powerstate; /* DBRI's powered up or not */
int sc_pmgrstate; /* PWR_RESUME etc. */
int sc_burst; /* DVMA burst size in effect */
bus_addr_t sc_dmabase; /* VA of buffer we provide */
void * sc_membase;
int sc_bufsiz; /* size of the buffer */
int sc_locked;
int sc_irqp;
int sc_waitseen;
int sc_refcount;
int sc_playing;
int sc_recording;
int sc_liu_state;
void (*sc_liu)(void *);
void *sc_liu_args;
struct dbri_pipe sc_pipe[DBRI_PIPE_MAX];
struct dbri_desc sc_desc[DBRI_NUM_DESCRIPTORS];
struct cs4215_state sc_mm;
int sc_latt, sc_ratt; /* output attenuation */
int sc_linp, sc_rinp; /* input volume */
int sc_monitor; /* monitor volume */
int sc_input; /* 0 - line, 1 - mic */
int sc_ctl_mode;
uint32_t sc_version;
int sc_chi_pipe_in;
int sc_chi_pipe_out;
int sc_chi_bpf;
int sc_desc_used;
struct audio_params sc_params;
struct dbri_dma *sc_dma;
};
#define dbri_dma_off(member, elem) \
((uint32_t)(unsigned long) \
(&(((struct dbri_dma *)0)->member[elem])))
#if 1
#define DBRI_CMD(cmd, intr, value) ((cmd << 28) | (intr << 27) | value)
#else
#define DBRI_CMD(cmd, intr, value) ((cmd << 28) | (1 << 27) | value)
#endif
#define DBRI_INTR_GETCHAN(v) (((v) >> 24) & 0x3f)
#define DBRI_INTR_GETCODE(v) (((v) >> 20) & 0xf)
#define DBRI_INTR_GETCMD(v) (((v) >> 16) & 0xf)
#define DBRI_INTR_GETVAL(v) ((v) & 0xffff)
#define DBRI_INTR_GETRVAL(v) ((v) & 0xfffff)
#define DBRI_SDP_MODE(v) ((v) & (7 << 13))
#define DBRI_PIPE(v) ((v) << 0)
#endif /* DBRI_VAR_H */