Aren
/
NetBSD
1
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity
NetBSD/sys/dev/raidframe/rf_demo.c

506 lines
17 KiB
C
Raw Blame History

/* $NetBSD: rf_demo.c,v 1.1 1998/11/13 04:20:28 oster Exp $ */
/*
* Copyright (c) 1995 Carnegie-Mellon University.
* All rights reserved.
*
* Author: Mark Holland, Khalil Amiri
*
* Permission to use, copy, modify and distribute this software and
* its documentation is hereby granted, provided that both the copyright
* notice and this permission notice appear in all copies of the
* software, derivative works or modified versions, and any portions
* thereof, and that both notices appear in supporting documentation.
*
* CARNEGIE MELLON ALLOWS FREE USE OF THIS SOFTWARE IN ITS "AS IS"
* CONDITION. CARNEGIE MELLON DISCLAIMS ANY LIABILITY OF ANY KIND
* FOR ANY DAMAGES WHATSOEVER RESULTING FROM THE USE OF THIS SOFTWARE.
*
* Carnegie Mellon requests users of this software to return to
*
* Software Distribution Coordinator or Software.Distribution@CS.CMU.EDU
* School of Computer Science
* Carnegie Mellon University
* Pittsburgh PA 15213-3890
*
* any improvements or extensions that they make and grant Carnegie the
* rights to redistribute these changes.
*/
/**********************************************************************************
*
* rf_demo.c -- code for supporting demos. this is not actually part of the driver.
*
**********************************************************************************/
/* :
* Log: rf_demo.c,v
* Revision 1.24 1996/06/17 14:38:33 jimz
* properly #if out RF_DEMO code
* fix bug in MakeConfig that was causing weird behavior
* in configuration routines (config was not zeroed at start)
* clean up genplot handling of stacks
*
* Revision 1.23 1996/06/17 03:23:09 jimz
* explicitly do pthread stuff (for join)
* NOTE: this should be changed!
*
* Revision 1.22 1996/06/14 23:15:38 jimz
* attempt to deal with thread GC problem
*
* Revision 1.21 1996/06/09 02:36:46 jimz
* lots of little crufty cleanup- fixup whitespace
* issues, comment #ifdefs, improve typing in some
* places (esp size-related)
*
* Revision 1.20 1996/06/05 18:06:02 jimz
* Major code cleanup. The Great Renaming is now done.
* Better modularity. Better typing. Fixed a bunch of
* synchronization bugs. Made a lot of global stuff
* per-desc or per-array. Removed dead code.
*
* Revision 1.19 1996/05/30 23:22:16 jimz
* bugfixes of serialization, timing problems
* more cleanup
*
* Revision 1.18 1996/05/30 11:29:41 jimz
* Numerous bug fixes. Stripe lock release code disagreed with the taking code
* about when stripes should be locked (I made it consistent: no parity, no lock)
* There was a lot of extra serialization of I/Os which I've removed- a lot of
* it was to calculate values for the cache code, which is no longer with us.
* More types, function, macro cleanup. Added code to properly quiesce the array
* on shutdown. Made a lot of stuff array-specific which was (bogusly) general
* before. Fixed memory allocation, freeing bugs.
*
* Revision 1.17 1996/05/27 18:56:37 jimz
* more code cleanup
* better typing
* compiles in all 3 environments
*
* Revision 1.16 1996/05/23 00:33:23 jimz
* code cleanup: move all debug decls to rf_options.c, all extern
* debug decls to rf_options.h, all debug vars preceded by rf_
*
* Revision 1.15 1996/05/20 16:14:08 jimz
* switch to rf_{mutex,cond}_{init,destroy}
*
* Revision 1.14 1996/05/18 19:51:34 jimz
* major code cleanup- fix syntax, make some types consistent,
* add prototypes, clean out dead code, et cetera
*
* Revision 1.13 1995/12/01 15:56:07 root
* added copyright info
*
*/
#include "rf_archs.h"
#if RF_DEMO > 0
#include <stdio.h>
#include <sys/types.h>
#include <sys/socket.h>
#include <strings.h>
#include <unistd.h>
#include <sys/time.h>
#include <signal.h>
#include "rf_threadstuff.h"
#include "rf_demo.h"
#include "rf_utils.h"
#include "rf_general.h"
#include "rf_options.h"
#ifdef SIMULATE
#include "rf_diskevent.h"
#endif /* SIMULATE */
static int doMax = 0; /* currently no way to set this */
/****************************************************************************************
* fault-free demo code
***************************************************************************************/
static int user_iops_meter = -1;
static int disk_iops_meter = -1;
static int max_user_meter = -1;
static int max_disk_meter = -1;
static int recon_pctg_meter = -1;
static int avg_resp_time_meter = -1;
static int recon_time_meter = -1;
static int ff_avg_resp_time_meter = -1;
static int deg_avg_resp_time_meter = -1;
static int recon_avg_resp_time_meter = -1;
static int user_ios_ff=0;
static int user_ios_deg=0;
static int user_ios_recon=0;
static long user_resp_time_sum_ff = 0;
static long user_resp_time_sum_deg = 0;
static long user_resp_time_sum_recon = 0;
int rf_demo_op_mode = 0;
RF_DECLARE_STATIC_MUTEX(iops_mutex)
static int user_ios_so_far, disk_ios_so_far, max_user, max_disk;
static long user_resp_time_sum_ms;
static int recon_pctg;
static struct timeval iops_starttime;
#ifndef SIMULATE
static RF_Thread_t update_thread_desc;
#endif /* !SIMULATE */
static int meter_update_terminate;
static int meter_update_interval = 2; /* seconds between meter updates */
static int iops_initialized = 0, recon_initialized = 0;
static char *demoMeterTags[] = {"FF", "Degr", "Recon"};
static int vpos=0;
static int rf_CreateMeter(char *title, char *geom, char *color);
static void rf_UpdateMeter(int meterid, int value);
static void rf_DestroyMeter(int meterid, int killproc);
void rf_startup_iops_demo(meter_vpos, C, G)
int meter_vpos;
int C;
int G;
{
char buf[100], title[100];
int rc;
vpos = meter_vpos;
sprintf(buf, "%dx%d-0+%d",RF_DEMO_METER_WIDTH, RF_DEMO_METER_HEIGHT, vpos * (RF_DEMO_METER_HEIGHT+RF_DEMO_METER_VSPACE));
sprintf(title,"%s %d/%d User IOs/sec",demoMeterTags[rf_demoMeterTag],C,G);
user_iops_meter = rf_CreateMeter(title, buf, "black");
sprintf(buf, "%dx%d-%d+%d",RF_DEMO_METER_WIDTH, RF_DEMO_METER_HEIGHT, RF_DEMO_METER_WIDTH+RF_DEMO_METER_SPACING,vpos * (RF_DEMO_METER_HEIGHT+RF_DEMO_METER_VSPACE));
sprintf(title,"%s %d/%d Disk IOs/sec",demoMeterTags[rf_demoMeterTag],C,G);
disk_iops_meter = rf_CreateMeter(title, buf, "red");
if (doMax) {
sprintf(buf, "%dx%d-%d+%d",RF_DEMO_METER_WIDTH, RF_DEMO_METER_HEIGHT, 2*(RF_DEMO_METER_WIDTH+RF_DEMO_METER_SPACING),vpos * (RF_DEMO_METER_HEIGHT+RF_DEMO_METER_VSPACE));
sprintf(title,"%s %d/%d Avg User IOs/s",demoMeterTags[rf_demoMeterTag],C,G);
max_user_meter = rf_CreateMeter(title, buf, "black");
sprintf(buf, "%dx%d-%d+%d",RF_DEMO_METER_WIDTH, RF_DEMO_METER_HEIGHT, 3*(RF_DEMO_METER_WIDTH+RF_DEMO_METER_SPACING), vpos * (RF_DEMO_METER_HEIGHT+RF_DEMO_METER_VSPACE));
sprintf(title,"%s %d/%d Avg Disk IOs/s",demoMeterTags[rf_demoMeterTag],C,G);
max_disk_meter = rf_CreateMeter(title, buf, "red");
sprintf(buf, "%dx%d-%d+%d",RF_DEMO_METER_WIDTH, RF_DEMO_METER_HEIGHT, 4*(RF_DEMO_METER_WIDTH+RF_DEMO_METER_SPACING), vpos * (RF_DEMO_METER_HEIGHT+RF_DEMO_METER_VSPACE));
} else {
sprintf(buf, "%dx%d-%d+%d",RF_DEMO_METER_WIDTH, RF_DEMO_METER_HEIGHT, 2*(RF_DEMO_METER_WIDTH+RF_DEMO_METER_SPACING), vpos * (RF_DEMO_METER_HEIGHT+RF_DEMO_METER_VSPACE));
}
sprintf(title,"%s %d/%d Avg User Resp Time (ms)",demoMeterTags[rf_demoMeterTag],C,G);
avg_resp_time_meter = rf_CreateMeter(title, buf, "blue");
rc = rf_mutex_init(&iops_mutex);
if (rc) {
RF_ERRORMSG3("Unable to init mutex file %s line %d rc=%d\n", __FILE__,
__LINE__, rc);
return;
}
user_ios_so_far = disk_ios_so_far = max_user = max_disk = 0;
user_resp_time_sum_ms = 0;
meter_update_terminate = 0;
#ifndef SIMULATE
pthread_create(&update_thread_desc, raidframe_attr_default, (pthread_startroutine_t)rf_meter_update_thread, NULL);
#endif /* !SIMULATE */
gettimeofday(&iops_starttime, NULL);
iops_initialized = 1;
}
void rf_update_user_stats(resptime)
int resptime;
{
if (!iops_initialized && !recon_initialized) return;
RF_LOCK_MUTEX(iops_mutex);
user_ios_so_far++;
user_resp_time_sum_ms += resptime;
RF_UNLOCK_MUTEX(iops_mutex);
}
void rf_update_disk_iops(val)
int val;
{
if (!iops_initialized) return;
RF_LOCK_MUTEX(iops_mutex);
disk_ios_so_far += val;
RF_UNLOCK_MUTEX(iops_mutex);
}
void rf_meter_update_thread()
{
struct timeval now, diff;
int iops, resptime;
float secs;
#ifndef SIMULATE
while (!meter_update_terminate) {
gettimeofday(&now, NULL);
RF_TIMEVAL_DIFF(&iops_starttime, &now, &diff);
secs = ((float) diff.tv_sec) + ((float) diff.tv_usec)/1000000.0;
#else /* !SIMULATE */
secs = rf_cur_time;
#endif /* !SIMULATE */
if (user_iops_meter >= 0) {
iops = (secs!=0.0) ? (int) (((float) user_ios_so_far) / secs) : 0;
rf_UpdateMeter(user_iops_meter, iops);
if (max_user_meter && iops > max_user) {max_user = iops; rf_UpdateMeter(max_user_meter, iops);}
}
if (disk_iops_meter >= 0) {
iops = (secs!=0.0) ? (int) (((float) disk_ios_so_far) / secs) : 0;
rf_UpdateMeter(disk_iops_meter, iops);
if (max_disk_meter && iops > max_disk) {max_disk = iops; rf_UpdateMeter(max_disk_meter, iops);}
}
if (recon_pctg_meter >= 0) {
rf_UpdateMeter(recon_pctg_meter, recon_pctg);
}
switch (rf_demo_op_mode){
case RF_DEMO_FAULT_FREE:
resptime = (user_ios_so_far != 0) ? user_resp_time_sum_ms / user_ios_so_far : 0;
if (resptime && (ff_avg_resp_time_meter >=0))
rf_UpdateMeter(ff_avg_resp_time_meter, resptime);
user_ios_ff += user_ios_so_far;
user_resp_time_sum_ff += user_resp_time_sum_ms;
break;
case RF_DEMO_DEGRADED:
resptime = (user_ios_so_far != 0) ? user_resp_time_sum_ms / user_ios_so_far : 0;
if (resptime &&(deg_avg_resp_time_meter >=0))
rf_UpdateMeter(deg_avg_resp_time_meter, resptime);
user_ios_deg += user_ios_so_far;
user_resp_time_sum_deg += user_resp_time_sum_ms;
case RF_DEMO_RECON:
resptime = (user_ios_so_far != 0) ? user_resp_time_sum_ms / user_ios_so_far : 0;
if (resptime && (recon_avg_resp_time_meter >= 0))
rf_UpdateMeter(recon_avg_resp_time_meter, resptime);
user_ios_recon += user_ios_so_far;
user_resp_time_sum_recon += user_resp_time_sum_ms;
break;
default: printf("WARNING: demo meter update thread: Invalid op mode! \n");
}
user_ios_so_far = 0;
user_resp_time_sum_ms = 0;
#ifndef SIMULATE
RF_DELAY_THREAD(1,0);
}
#endif /* !SIMULATE */
}
void rf_finish_iops_demo()
{
long status;
if (!iops_initialized) return;
iops_initialized = 0; /* make sure any subsequent update calls don't do anything */
meter_update_terminate = 1;
#ifndef SIMULATE
pthread_join(update_thread_desc, (pthread_addr_t)&status);
#endif /* !SIMULATE */
rf_DestroyMeter(user_iops_meter, (doMax) ? 1 : 0);
rf_DestroyMeter(disk_iops_meter, (doMax) ? 1 : 0);
rf_DestroyMeter(max_user_meter, 0);
rf_DestroyMeter(max_disk_meter, 0);
rf_DestroyMeter(avg_resp_time_meter, 0);
rf_mutex_destroy(&iops_mutex);
}
void rf_demo_update_mode(arg_mode)
int arg_mode;
{
int hpos;
char buf[100], title[100];
switch (rf_demo_op_mode = arg_mode) {
case RF_DEMO_DEGRADED:
/* freeze fault-free response time meter; create degraded mode meter */
hpos=rf_demoMeterHpos+2;
sprintf(buf, "%dx%d-%d+%d",RF_DEMO_METER_WIDTH, RF_DEMO_METER_HEIGHT, hpos * (RF_DEMO_METER_WIDTH+RF_DEMO_METER_SPACING), vpos * (RF_DEMO_METER_HEIGHT+RF_DEMO_METER_VSPACE));
sprintf(title,"Degraded Mode Average Response Time (ms)",demoMeterTags[rf_demoMeterTag]);
deg_avg_resp_time_meter = rf_CreateMeter(title, buf, "purple");
rf_UpdateMeter(ff_avg_resp_time_meter, (user_ios_ff == 0)? 0: user_resp_time_sum_ff/user_ios_ff);
break;
case RF_DEMO_RECON:
/* freeze degraded mode response time meter; create recon meters */
hpos = rf_demoMeterHpos+1;
sprintf(buf, "%dx%d-%d+%d",RF_DEMO_METER_WIDTH, RF_DEMO_METER_HEIGHT, hpos * (RF_DEMO_METER_WIDTH+RF_DEMO_METER_SPACING), vpos * (RF_DEMO_METER_HEIGHT+RF_DEMO_METER_VSPACE));
sprintf(title,"Reconstruction Average Response Time (ms)",demoMeterTags[rf_demoMeterTag]);
recon_avg_resp_time_meter = rf_CreateMeter(title, buf, "darkgreen");
sprintf(buf, "%dx%d-%d+%d",RF_DEMO_METER_WIDTH, RF_DEMO_METER_HEIGHT, (rf_demoMeterHpos) * (RF_DEMO_METER_WIDTH + RF_DEMO_METER_SPACING), vpos * (RF_DEMO_METER_HEIGHT+RF_DEMO_METER_VSPACE));
sprintf(title,"Percent Complete / Recon Time");
recon_pctg_meter = rf_CreateMeter(title,buf,"red");
rf_UpdateMeter(deg_avg_resp_time_meter, (user_ios_deg == 0)? 0: user_resp_time_sum_deg/user_ios_deg);
break;
default: /*do nothing -- finish_recon_demo will update rest of meters */;
}
}
/****************************************************************************************
* reconstruction demo code
***************************************************************************************/
void rf_startup_recon_demo(meter_vpos, C, G, init)
int meter_vpos;
int C;
int G;
int init;
{
char buf[100], title[100];
int rc;
vpos = meter_vpos;
if (init) {
/* init demo -- display ff resp time meter */
sprintf(buf, "%dx%d-%d+%d",RF_DEMO_METER_WIDTH, RF_DEMO_METER_HEIGHT, (rf_demoMeterHpos+3) * (RF_DEMO_METER_WIDTH+RF_DEMO_METER_SPACING), vpos * (RF_DEMO_METER_HEIGHT+RF_DEMO_METER_VSPACE));
sprintf(title,"%s %d/%d Fault-Free Avg User Resp Time (ms)",demoMeterTags[rf_demoMeterTag],C,G);
ff_avg_resp_time_meter = rf_CreateMeter(title, buf, "blue");
}
rc = rf_mutex_init(&iops_mutex);
if (rc) {
RF_ERRORMSG3("Unable to init mutex file %s line %d rc=%d\n", __FILE__,
__LINE__, rc);
}
meter_update_terminate = 0;
#ifndef SIMULATE
pthread_create(&update_thread_desc, raidframe_attr_default, (pthread_startroutine_t)rf_meter_update_thread, NULL);
#endif /* !SIMULATE */
gettimeofday(&iops_starttime, NULL);
recon_initialized = 1;
}
void rf_update_recon_meter(val)
int val;
{
recon_pctg = val;
}
void rf_finish_recon_demo(etime)
struct timeval *etime;
{
long status;
int hpos;
hpos = rf_demoMeterHpos;
recon_initialized = 0; /* make sure any subsequent
update calls don't do anything */
recon_pctg = etime->tv_sec; /* display recon time on meter */
rf_UpdateMeter(recon_avg_resp_time_meter, (user_ios_recon == 0)? 0: user_resp_time_sum_recon/user_ios_recon);
rf_UpdateMeter(recon_pctg_meter, etime->tv_sec);
meter_update_terminate = 1;
#ifndef SIMULATE
pthread_join(update_thread_desc, (pthread_addr_t)&status); /* join the meter update thread */
#endif /* !SIMULATE */
rf_DestroyMeter(recon_pctg_meter, 0);
rf_DestroyMeter(ff_avg_resp_time_meter, 0);
rf_DestroyMeter(deg_avg_resp_time_meter, 0);
rf_DestroyMeter(recon_avg_resp_time_meter, 0);
rf_mutex_destroy(&iops_mutex);
}
/****************************************************************************************
* meter manipulation code
***************************************************************************************/
#define MAXMETERS 50
static struct meter_info { int sd; int pid; char name[100]; } minfo[MAXMETERS];
static int meter_num = 0;
int rf_ConfigureMeters()
{
int i;
for (i=0; i<MAXMETERS; i++)
minfo[i].sd = -1;
return(0);
}
/* forks a dmeter process to create a 4-digit meter window
* "title" appears in the title bar of the meter window
* returns an integer handle (really a socket descriptor) by which
* the new meter can be accessed.
*/
static int rf_CreateMeter(title, geom, color)
char *title;
char *geom;
char *color;
{
char geombuf[100], *clr;
int sd, pid, i, status;
struct sockaddr sa;
if (!geom) sprintf(geombuf,"120x40-0+%d", 50*meter_num); else sprintf(geombuf, "%s", geom);
clr = (color) ? color : "black";
sprintf(minfo[meter_num].name,"/tmp/xm_%d",meter_num);
unlink(minfo[meter_num].name);
if ( !(pid = fork()) ) {
execlp("dmeter","dmeter","-noscroll","-t",title,"-geometry",geombuf,"-sa",minfo[meter_num].name,"-fg",clr,NULL);
perror("rf_CreateMeter: exec failed");
return(-1);
}
sd = socket(AF_UNIX,SOCK_STREAM,0);
sa.sa_family = AF_UNIX;
strcpy(sa.sa_data, minfo[meter_num].name);
for (i=0; i<50; i++) { /* this give us 25 seconds to get the meter running */
if ( (status = connect(sd,&sa,sizeof(sa))) != -1) break;
#ifdef SIMULATE
sleep (1);
#else /* SIMULATE */
RF_DELAY_THREAD(0, 500);
#endif /* SIMULATE */
}
if (status == -1) {
perror("Unable to connect to meter");
exit(1);
}
minfo[meter_num].sd = sd;
minfo[meter_num].pid = pid;
return(meter_num++);
}
/* causes the meter to display the given value */
void rf_UpdateMeter(meterid, value)
int meterid;
int value;
{
if (write(minfo[meterid].sd, &value, sizeof(int)) < sizeof(int)) {
fprintf(stderr,"Unable to write to meter %d\n",meterid);
}
}
void rf_DestroyMeter(meterid, killproc)
int meterid;
int killproc;
{
close(minfo[meterid].sd);
if (killproc) kill(minfo[meterid].pid, SIGTERM);
minfo[meterid].sd = -1;
}
int rf_ShutdownAllMeters()
{
int i;
for (i=0; i<MAXMETERS; i++)
if (minfo[i].sd >= 0)
rf_DestroyMeter(i, 0);
return(0);
}
#endif /* RF_DEMO > 0 */
Reference in New Issue View Git Blame Copy Permalink