1285 lines
28 KiB
C
1285 lines
28 KiB
C
/* $NetBSD: pm_direct.c,v 1.16 2001/09/16 16:40:44 wiz Exp $ */
|
|
|
|
/*
|
|
* Copyright (C) 1997 Takashi Hamada
|
|
* All rights reserved.
|
|
*
|
|
* Redistribution and use in source and binary forms, with or without
|
|
* modification, are permitted provided that the following conditions
|
|
* are met:
|
|
* 1. Redistributions of source code must retain the above copyright
|
|
* notice, this list of conditions and the following disclaimer.
|
|
* 2. Redistributions in binary form must reproduce the above copyright
|
|
* notice, this list of conditions and the following disclaimer in the
|
|
* documentation and/or other materials provided with the distribution.
|
|
* 3. All advertising materials mentioning features or use of this software
|
|
* must display the following acknowledgement:
|
|
* This product includes software developed by Takashi Hamada
|
|
* 4. The name of the author may not be used to endorse or promote products
|
|
* derived from this software without specific prior written permission.
|
|
*
|
|
* THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR
|
|
* IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES
|
|
* OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.
|
|
* IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
|
|
* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
|
|
* NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
|
|
* DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
|
|
* THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
|
|
* (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
|
|
* OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
|
|
*/
|
|
/* From: pm_direct.c 1.3 03/18/98 Takashi Hamada */
|
|
|
|
#ifdef DEBUG
|
|
#ifndef ADB_DEBUG
|
|
#define ADB_DEBUG
|
|
#endif
|
|
#endif
|
|
|
|
/* #define PM_GRAB_SI 1 */
|
|
|
|
#include <sys/param.h>
|
|
#include <sys/cdefs.h>
|
|
#include <sys/device.h>
|
|
#include <sys/systm.h>
|
|
|
|
#include <machine/adbsys.h>
|
|
#include <machine/cpu.h>
|
|
|
|
#include <macppc/dev/adbvar.h>
|
|
#include <macppc/dev/pm_direct.h>
|
|
#include <macppc/dev/viareg.h>
|
|
|
|
extern int adb_polling; /* Are we polling? (Debugger mode) */
|
|
|
|
/* hardware dependent values */
|
|
#define ADBDelay 100 /* XXX */
|
|
#define HwCfgFlags3 0x20000 /* XXX */
|
|
|
|
/* define the types of the Power Manager */
|
|
#define PM_HW_UNKNOWN 0x00 /* don't know */
|
|
#define PM_HW_PB1XX 0x01 /* PowerBook 1XX series */
|
|
#define PM_HW_PB5XX 0x02 /* PowerBook Duo and 5XX series */
|
|
|
|
/* useful macros */
|
|
#define PM_SR() read_via_reg(VIA1, vSR)
|
|
#define PM_VIA_INTR_ENABLE() write_via_reg(VIA1, vIER, 0x90)
|
|
#define PM_VIA_INTR_DISABLE() write_via_reg(VIA1, vIER, 0x10)
|
|
#define PM_VIA_CLR_INTR() write_via_reg(VIA1, vIFR, 0x90)
|
|
#if 0
|
|
#define PM_SET_STATE_ACKON() via_reg_or(VIA2, vBufB, 0x04)
|
|
#define PM_SET_STATE_ACKOFF() via_reg_and(VIA2, vBufB, ~0x04)
|
|
#define PM_IS_ON (0x02 == (read_via_reg(VIA2, vBufB) & 0x02))
|
|
#define PM_IS_OFF (0x00 == (read_via_reg(VIA2, vBufB) & 0x02))
|
|
#else
|
|
#define PM_SET_STATE_ACKON() via_reg_or(VIA2, vBufB, 0x10)
|
|
#define PM_SET_STATE_ACKOFF() via_reg_and(VIA2, vBufB, ~0x10)
|
|
#define PM_IS_ON (0x08 == (read_via_reg(VIA2, vBufB) & 0x08))
|
|
#define PM_IS_OFF (0x00 == (read_via_reg(VIA2, vBufB) & 0x08))
|
|
#endif
|
|
|
|
/*
|
|
* Variables for internal use
|
|
*/
|
|
int pmHardware = PM_HW_UNKNOWN;
|
|
u_short pm_existent_ADB_devices = 0x0; /* each bit expresses the existent ADB device */
|
|
u_int pm_LCD_brightness = 0x0;
|
|
u_int pm_LCD_contrast = 0x0;
|
|
u_int pm_counter = 0; /* clock count */
|
|
|
|
/* these values shows that number of data returned after 'send' cmd is sent */
|
|
signed char pm_send_cmd_type[] = {
|
|
-1, -1, -1, -1, -1, -1, -1, -1,
|
|
-1, -1, -1, -1, -1, -1, -1, -1,
|
|
0x01, 0x01, -1, -1, -1, -1, -1, -1,
|
|
0x00, 0x00, -1, -1, -1, -1, -1, 0x00,
|
|
-1, 0x00, 0x02, 0x01, 0x01, -1, -1, -1,
|
|
0x00, -1, -1, -1, -1, -1, -1, -1,
|
|
0x04, 0x14, -1, 0x03, -1, -1, -1, -1,
|
|
0x00, 0x00, 0x02, 0x02, -1, -1, -1, -1,
|
|
0x01, 0x01, -1, -1, -1, -1, -1, -1,
|
|
0x00, 0x00, -1, -1, 0x01, -1, -1, -1,
|
|
0x01, 0x00, 0x02, 0x02, -1, 0x01, 0x03, 0x01,
|
|
0x00, 0x01, 0x00, 0x00, 0x00, -1, -1, -1,
|
|
0x02, -1, -1, -1, -1, -1, -1, -1,
|
|
0x00, 0x00, 0x00, 0x00, 0x00, 0x00, -1, -1,
|
|
0x01, 0x01, 0x01, -1, -1, -1, -1, -1,
|
|
0x00, 0x00, -1, -1, -1, -1, 0x04, 0x04,
|
|
0x04, -1, 0x00, -1, -1, -1, -1, -1,
|
|
0x00, -1, -1, -1, -1, -1, -1, -1,
|
|
0x01, 0x02, -1, -1, -1, -1, -1, -1,
|
|
0x00, 0x00, -1, -1, -1, -1, -1, -1,
|
|
0x02, 0x02, 0x02, 0x04, -1, 0x00, -1, -1,
|
|
0x01, 0x01, 0x03, 0x02, -1, -1, -1, -1,
|
|
-1, -1, -1, -1, -1, -1, -1, -1,
|
|
-1, -1, -1, -1, -1, -1, -1, -1,
|
|
-1, -1, -1, -1, -1, -1, -1, -1,
|
|
-1, -1, -1, -1, -1, -1, -1, -1,
|
|
0x00, -1, -1, -1, -1, -1, -1, -1,
|
|
0x01, 0x01, -1, -1, 0x00, 0x00, -1, -1,
|
|
-1, 0x04, 0x00, -1, -1, -1, -1, -1,
|
|
0x03, -1, 0x00, -1, 0x00, -1, -1, 0x00,
|
|
-1, -1, -1, -1, -1, -1, -1, -1,
|
|
-1, -1, -1, -1, -1, -1, -1, -1
|
|
};
|
|
|
|
/* these values shows that number of data returned after 'receive' cmd is sent */
|
|
signed char pm_receive_cmd_type[] = {
|
|
0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
|
|
-1, -1, -1, -1, -1, -1, -1, -1,
|
|
0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
|
|
0x02, 0x02, -1, -1, -1, -1, -1, 0x00,
|
|
0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
|
|
-1, -1, -1, -1, -1, -1, -1, -1,
|
|
0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
|
|
0x05, 0x15, -1, 0x02, -1, -1, -1, -1,
|
|
0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
|
|
0x02, 0x02, -1, -1, -1, -1, -1, -1,
|
|
0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
|
|
0x02, 0x00, 0x03, 0x03, -1, -1, -1, -1,
|
|
0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
|
|
0x04, 0x04, 0x03, 0x09, -1, -1, -1, -1,
|
|
0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
|
|
-1, -1, -1, -1, -1, -1, 0x01, 0x01,
|
|
0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
|
|
0x06, -1, -1, -1, -1, -1, -1, -1,
|
|
0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
|
|
0x02, 0x02, -1, -1, -1, -1, -1, -1,
|
|
0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
|
|
0x02, 0x00, 0x00, 0x00, -1, -1, -1, -1,
|
|
0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
|
|
-1, -1, -1, -1, -1, -1, -1, -1,
|
|
0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
|
|
-1, -1, -1, -1, -1, -1, -1, -1,
|
|
0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
|
|
0x02, 0x02, -1, -1, 0x02, -1, -1, -1,
|
|
0x00, 0x00, 0x01, 0x00, 0x00, 0x00, 0x00, 0x00,
|
|
-1, -1, 0x02, -1, -1, -1, -1, 0x00,
|
|
0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
|
|
-1, -1, -1, -1, -1, -1, -1, -1,
|
|
};
|
|
|
|
|
|
/*
|
|
* Define the private functions
|
|
*/
|
|
|
|
/* for debugging */
|
|
#ifdef ADB_DEBUG
|
|
void pm_printerr __P((char *, int, int, char *));
|
|
#endif
|
|
|
|
int pm_wait_busy __P((int));
|
|
int pm_wait_free __P((int));
|
|
|
|
/* these functions are for the PB1XX series */
|
|
int pm_receive_pm1 __P((u_char *));
|
|
int pm_send_pm1 __P((u_char,int));
|
|
int pm_pmgrop_pm1 __P((PMData *));
|
|
void pm_intr_pm1 __P((void));
|
|
|
|
/* these functions are for the PB Duo series and the PB 5XX series */
|
|
int pm_receive_pm2 __P((u_char *));
|
|
int pm_send_pm2 __P((u_char));
|
|
int pm_pmgrop_pm2 __P((PMData *));
|
|
void pm_intr_pm2 __P((void));
|
|
|
|
/* these functions are called from adb_direct.c */
|
|
void pm_setup_adb __P((void));
|
|
void pm_check_adb_devices __P((int));
|
|
void pm_intr __P((void));
|
|
int pm_adb_op __P((u_char *, void *, void *, int));
|
|
|
|
/* these functions also use the variables of adb_direct.c */
|
|
void pm_adb_get_TALK_result __P((PMData *));
|
|
void pm_adb_get_ADB_data __P((PMData *));
|
|
void pm_adb_poll_next_device_pm1 __P((PMData *));
|
|
|
|
|
|
/*
|
|
* These variables are in adb_direct.c.
|
|
*/
|
|
extern u_char *adbBuffer; /* pointer to user data area */
|
|
extern void *adbCompRout; /* pointer to the completion routine */
|
|
extern void *adbCompData; /* pointer to the completion routine data */
|
|
extern int adbWaiting; /* waiting for return data from the device */
|
|
extern int adbWaitingCmd; /* ADB command we are waiting for */
|
|
extern int adbStarting; /* doing ADB reinit, so do "polling" differently */
|
|
|
|
#define ADB_MAX_MSG_LENGTH 16
|
|
#define ADB_MAX_HDR_LENGTH 8
|
|
struct adbCommand {
|
|
u_char header[ADB_MAX_HDR_LENGTH]; /* not used yet */
|
|
u_char data[ADB_MAX_MSG_LENGTH]; /* packet data only */
|
|
u_char *saveBuf; /* where to save result */
|
|
u_char *compRout; /* completion routine pointer */
|
|
u_char *compData; /* completion routine data pointer */
|
|
u_int cmd; /* the original command for this data */
|
|
u_int unsol; /* 1 if packet was unsolicited */
|
|
u_int ack_only; /* 1 for no special processing */
|
|
};
|
|
extern void adb_pass_up __P((struct adbCommand *));
|
|
|
|
#if 0
|
|
/*
|
|
* Define the external functions
|
|
*/
|
|
extern int zshard __P((int)); /* from zs.c */
|
|
#endif
|
|
|
|
#ifdef ADB_DEBUG
|
|
/*
|
|
* This function dumps contents of the PMData
|
|
*/
|
|
void
|
|
pm_printerr(ttl, rval, num, data)
|
|
char *ttl;
|
|
int rval;
|
|
int num;
|
|
char *data;
|
|
{
|
|
int i;
|
|
|
|
printf("pm: %s:%04x %02x ", ttl, rval, num);
|
|
for (i = 0; i < num; i++)
|
|
printf("%02x ", data[i]);
|
|
printf("\n");
|
|
}
|
|
#endif
|
|
|
|
|
|
|
|
/*
|
|
* Check the hardware type of the Power Manager
|
|
*/
|
|
void
|
|
pm_setup_adb()
|
|
{
|
|
pmHardware = PM_HW_PB5XX; /* XXX */
|
|
}
|
|
|
|
|
|
/*
|
|
* Check the existent ADB devices
|
|
*/
|
|
void
|
|
pm_check_adb_devices(id)
|
|
int id;
|
|
{
|
|
u_short ed = 0x1;
|
|
|
|
ed <<= id;
|
|
pm_existent_ADB_devices |= ed;
|
|
}
|
|
|
|
|
|
/*
|
|
* Wait until PM IC is busy
|
|
*/
|
|
int
|
|
pm_wait_busy(delay)
|
|
int delay;
|
|
{
|
|
while (PM_IS_ON) {
|
|
#ifdef PM_GRAB_SI
|
|
#if 0
|
|
zshard(0); /* grab any serial interrupts */
|
|
#else
|
|
(void)intr_dispatch(0x70);
|
|
#endif
|
|
#endif
|
|
if ((--delay) < 0)
|
|
return 1; /* timeout */
|
|
}
|
|
return 0;
|
|
}
|
|
|
|
|
|
/*
|
|
* Wait until PM IC is free
|
|
*/
|
|
int
|
|
pm_wait_free(delay)
|
|
int delay;
|
|
{
|
|
while (PM_IS_OFF) {
|
|
#ifdef PM_GRAB_SI
|
|
#if 0
|
|
zshard(0); /* grab any serial interrupts */
|
|
#else
|
|
(void)intr_dispatch(0x70);
|
|
#endif
|
|
#endif
|
|
if ((--delay) < 0)
|
|
return 0; /* timeout */
|
|
}
|
|
return 1;
|
|
}
|
|
|
|
|
|
|
|
/*
|
|
* Functions for the PB1XX series
|
|
*/
|
|
|
|
/*
|
|
* Receive data from PM for the PB1XX series
|
|
*/
|
|
int
|
|
pm_receive_pm1(data)
|
|
u_char *data;
|
|
{
|
|
#if 0
|
|
int rval = 0xffffcd34;
|
|
|
|
via_reg(VIA2, vDirA) = 0x00;
|
|
|
|
switch (1) {
|
|
default:
|
|
if (pm_wait_busy(0x40) != 0)
|
|
break; /* timeout */
|
|
|
|
PM_SET_STATE_ACKOFF();
|
|
*data = via_reg(VIA2, 0x200);
|
|
|
|
rval = 0xffffcd33;
|
|
if (pm_wait_free(0x40) == 0)
|
|
break; /* timeout */
|
|
|
|
rval = 0x00;
|
|
break;
|
|
}
|
|
|
|
PM_SET_STATE_ACKON();
|
|
via_reg(VIA2, vDirA) = 0x00;
|
|
|
|
return rval;
|
|
#else
|
|
panic("pm_receive_pm1");
|
|
#endif
|
|
}
|
|
|
|
|
|
|
|
/*
|
|
* Send data to PM for the PB1XX series
|
|
*/
|
|
int
|
|
pm_send_pm1(data, delay)
|
|
u_char data;
|
|
int delay;
|
|
{
|
|
#if 0
|
|
int rval;
|
|
|
|
via_reg(VIA2, vDirA) = 0xff;
|
|
via_reg(VIA2, 0x200) = data;
|
|
|
|
PM_SET_STATE_ACKOFF();
|
|
if (pm_wait_busy(0x400) != 0) {
|
|
PM_SET_STATE_ACKON();
|
|
via_reg(VIA2, vDirA) = 0x00;
|
|
|
|
return 0xffffcd36;
|
|
}
|
|
|
|
rval = 0x0;
|
|
PM_SET_STATE_ACKON();
|
|
if (pm_wait_free(0x40) == 0)
|
|
rval = 0xffffcd35;
|
|
|
|
PM_SET_STATE_ACKON();
|
|
via_reg(VIA2, vDirA) = 0x00;
|
|
|
|
return rval;
|
|
#else
|
|
panic("pm_send_pm1");
|
|
#endif
|
|
}
|
|
|
|
|
|
/*
|
|
* My PMgrOp routine for the PB1XX series
|
|
*/
|
|
int
|
|
pm_pmgrop_pm1(pmdata)
|
|
PMData *pmdata;
|
|
{
|
|
#if 0
|
|
int i;
|
|
int s = 0x81815963;
|
|
u_char via1_vIER, via1_vDirA;
|
|
int rval = 0;
|
|
int num_pm_data = 0;
|
|
u_char pm_cmd;
|
|
u_char pm_data;
|
|
u_char *pm_buf;
|
|
|
|
/* disable all inetrrupts but PM */
|
|
via1_vIER = via_reg(VIA1, vIER);
|
|
PM_VIA_INTR_DISABLE();
|
|
|
|
via1_vDirA = via_reg(VIA1, vDirA);
|
|
|
|
switch (pmdata->command) {
|
|
default:
|
|
for (i = 0; i < 7; i++) {
|
|
via_reg(VIA2, vDirA) = 0x00;
|
|
|
|
/* wait until PM is free */
|
|
if (pm_wait_free(ADBDelay) == 0) { /* timeout */
|
|
via_reg(VIA2, vDirA) = 0x00;
|
|
/* restore formar value */
|
|
via_reg(VIA1, vDirA) = via1_vDirA;
|
|
via_reg(VIA1, vIER) = via1_vIER;
|
|
return 0xffffcd38;
|
|
}
|
|
|
|
switch (mac68k_machine.machineid) {
|
|
case MACH_MACPB160:
|
|
case MACH_MACPB165:
|
|
case MACH_MACPB165C:
|
|
case MACH_MACPB180:
|
|
case MACH_MACPB180C:
|
|
{
|
|
int delay = ADBDelay * 16;
|
|
|
|
via_reg(VIA2, vDirA) = 0x00;
|
|
while ((via_reg(VIA2, 0x200) == 0x7f) && (delay >= 0))
|
|
delay--;
|
|
|
|
if (delay < 0) { /* timeout */
|
|
via_reg(VIA2, vDirA) = 0x00;
|
|
/* restore formar value */
|
|
via_reg(VIA1, vIER) = via1_vIER;
|
|
return 0xffffcd38;
|
|
}
|
|
}
|
|
} /* end switch */
|
|
|
|
s = splhigh();
|
|
|
|
via1_vDirA = via_reg(VIA1, vDirA);
|
|
via_reg(VIA1, vDirA) &= 0x7f;
|
|
|
|
pm_cmd = (u_char)(pmdata->command & 0xff);
|
|
if ((rval = pm_send_pm1(pm_cmd, ADBDelay * 8)) == 0)
|
|
break; /* send command succeeded */
|
|
|
|
via_reg(VIA1, vDirA) = via1_vDirA;
|
|
splx(s);
|
|
} /* end for */
|
|
|
|
/* failed to send a command */
|
|
if (i == 7) {
|
|
via_reg(VIA2, vDirA) = 0x00;
|
|
/* restore formar value */
|
|
via_reg(VIA1, vDirA) = via1_vDirA;
|
|
via_reg(VIA1, vIER) = via1_vIER;
|
|
if (s != 0x81815963)
|
|
splx(s);
|
|
return 0xffffcd38;
|
|
}
|
|
|
|
/* send # of PM data */
|
|
num_pm_data = pmdata->num_data;
|
|
if ((rval = pm_send_pm1((u_char)(num_pm_data & 0xff), ADBDelay * 8)) != 0)
|
|
break; /* timeout */
|
|
|
|
/* send PM data */
|
|
pm_buf = (u_char *)pmdata->s_buf;
|
|
for (i = 0; i < num_pm_data; i++)
|
|
if ((rval = pm_send_pm1(pm_buf[i], ADBDelay * 8)) != 0)
|
|
break; /* timeout */
|
|
if ((i != num_pm_data) && (num_pm_data != 0))
|
|
break; /* timeout */
|
|
|
|
/* Will PM IC return data? */
|
|
if ((pm_cmd & 0x08) == 0) {
|
|
rval = 0;
|
|
break; /* no returned data */
|
|
}
|
|
|
|
rval = 0xffffcd37;
|
|
if (pm_wait_busy(ADBDelay) != 0)
|
|
break; /* timeout */
|
|
|
|
/* receive PM command */
|
|
if ((rval = pm_receive_pm1(&pm_data)) != 0)
|
|
break;
|
|
|
|
pmdata->command = pm_data;
|
|
|
|
/* receive number of PM data */
|
|
if ((rval = pm_receive_pm1(&pm_data)) != 0)
|
|
break; /* timeout */
|
|
num_pm_data = pm_data;
|
|
pmdata->num_data = num_pm_data;
|
|
|
|
/* receive PM data */
|
|
pm_buf = (u_char *)pmdata->r_buf;
|
|
for (i = 0; i < num_pm_data; i++) {
|
|
if ((rval = pm_receive_pm1(&pm_data)) != 0)
|
|
break; /* timeout */
|
|
pm_buf[i] = pm_data;
|
|
}
|
|
|
|
rval = 0;
|
|
}
|
|
|
|
via_reg(VIA2, vDirA) = 0x00;
|
|
|
|
/* restore formar value */
|
|
via_reg(VIA1, vDirA) = via1_vDirA;
|
|
via_reg(VIA1, vIER) = via1_vIER;
|
|
if (s != 0x81815963)
|
|
splx(s);
|
|
|
|
return rval;
|
|
#else
|
|
panic("pm_pmgrop_pm1");
|
|
#endif
|
|
}
|
|
|
|
|
|
/*
|
|
* My PM interrupt routine for PB1XX series
|
|
*/
|
|
void
|
|
pm_intr_pm1()
|
|
{
|
|
#if 0
|
|
int s;
|
|
int rval;
|
|
PMData pmdata;
|
|
|
|
s = splhigh();
|
|
|
|
PM_VIA_CLR_INTR(); /* clear VIA1 interrupt */
|
|
|
|
/* ask PM what happend */
|
|
pmdata.command = 0x78;
|
|
pmdata.num_data = 0;
|
|
pmdata.data[0] = pmdata.data[1] = 0;
|
|
pmdata.s_buf = &pmdata.data[2];
|
|
pmdata.r_buf = &pmdata.data[2];
|
|
rval = pm_pmgrop_pm1(&pmdata);
|
|
if (rval != 0) {
|
|
#ifdef ADB_DEBUG
|
|
if (adb_debug)
|
|
printf("pm: PM is not ready. error code=%08x\n", rval);
|
|
#endif
|
|
splx(s);
|
|
}
|
|
|
|
if ((pmdata.data[2] & 0x10) == 0x10) {
|
|
if ((pmdata.data[2] & 0x0f) == 0) {
|
|
/* ADB data that were requested by TALK command */
|
|
pm_adb_get_TALK_result(&pmdata);
|
|
} else if ((pmdata.data[2] & 0x08) == 0x8) {
|
|
/* PM is requesting to poll */
|
|
pm_adb_poll_next_device_pm1(&pmdata);
|
|
} else if ((pmdata.data[2] & 0x04) == 0x4) {
|
|
/* ADB device event */
|
|
pm_adb_get_ADB_data(&pmdata);
|
|
}
|
|
} else {
|
|
#ifdef ADB_DEBUG
|
|
if (adb_debug)
|
|
pm_printerr("driver does not supported this event.",
|
|
rval, pmdata.num_data, pmdata.data);
|
|
#endif
|
|
}
|
|
|
|
splx(s);
|
|
#else
|
|
panic("pm_intr_pm1");
|
|
#endif
|
|
}
|
|
|
|
|
|
|
|
/*
|
|
* Functions for the PB Duo series and the PB 5XX series
|
|
*/
|
|
|
|
/*
|
|
* Receive data from PM for the PB Duo series and the PB 5XX series
|
|
*/
|
|
int
|
|
pm_receive_pm2(data)
|
|
u_char *data;
|
|
{
|
|
int i;
|
|
int rval;
|
|
|
|
rval = 0xffffcd34;
|
|
|
|
switch (1) {
|
|
default:
|
|
/* set VIA SR to input mode */
|
|
via_reg_or(VIA1, vACR, 0x0c);
|
|
via_reg_and(VIA1, vACR, ~0x10);
|
|
i = PM_SR();
|
|
|
|
PM_SET_STATE_ACKOFF();
|
|
if (pm_wait_busy((int)ADBDelay*32) != 0)
|
|
break; /* timeout */
|
|
|
|
PM_SET_STATE_ACKON();
|
|
rval = 0xffffcd33;
|
|
if (pm_wait_free((int)ADBDelay*32) == 0)
|
|
break; /* timeout */
|
|
|
|
*data = PM_SR();
|
|
rval = 0;
|
|
|
|
break;
|
|
}
|
|
|
|
PM_SET_STATE_ACKON();
|
|
via_reg_or(VIA1, vACR, 0x1c);
|
|
|
|
return rval;
|
|
}
|
|
|
|
|
|
|
|
/*
|
|
* Send data to PM for the PB Duo series and the PB 5XX series
|
|
*/
|
|
int
|
|
pm_send_pm2(data)
|
|
u_char data;
|
|
{
|
|
int rval;
|
|
|
|
via_reg_or(VIA1, vACR, 0x1c);
|
|
write_via_reg(VIA1, vSR, data); /* PM_SR() = data; */
|
|
|
|
PM_SET_STATE_ACKOFF();
|
|
rval = 0xffffcd36;
|
|
if (pm_wait_busy((int)ADBDelay*32) != 0) {
|
|
PM_SET_STATE_ACKON();
|
|
|
|
via_reg_or(VIA1, vACR, 0x1c);
|
|
|
|
return rval;
|
|
}
|
|
|
|
PM_SET_STATE_ACKON();
|
|
rval = 0xffffcd35;
|
|
if (pm_wait_free((int)ADBDelay*32) != 0)
|
|
rval = 0;
|
|
|
|
PM_SET_STATE_ACKON();
|
|
via_reg_or(VIA1, vACR, 0x1c);
|
|
|
|
return rval;
|
|
}
|
|
|
|
|
|
|
|
/*
|
|
* My PMgrOp routine for the PB Duo series and the PB 5XX series
|
|
*/
|
|
int
|
|
pm_pmgrop_pm2(pmdata)
|
|
PMData *pmdata;
|
|
{
|
|
int i;
|
|
int s;
|
|
u_char via1_vIER;
|
|
int rval = 0;
|
|
int num_pm_data = 0;
|
|
u_char pm_cmd;
|
|
short pm_num_rx_data;
|
|
u_char pm_data;
|
|
u_char *pm_buf;
|
|
|
|
s = splhigh();
|
|
|
|
/* disable all inetrrupts but PM */
|
|
via1_vIER = 0x10;
|
|
via1_vIER &= read_via_reg(VIA1, vIER);
|
|
write_via_reg(VIA1, vIER, via1_vIER);
|
|
if (via1_vIER != 0x0)
|
|
via1_vIER |= 0x80;
|
|
|
|
switch (pmdata->command) {
|
|
default:
|
|
/* wait until PM is free */
|
|
pm_cmd = (u_char)(pmdata->command & 0xff);
|
|
rval = 0xcd38;
|
|
if (pm_wait_free(ADBDelay * 4) == 0)
|
|
break; /* timeout */
|
|
|
|
if (HwCfgFlags3 & 0x00200000) {
|
|
/* PB 160, PB 165(c), PB 180(c)? */
|
|
int delay = ADBDelay * 16;
|
|
|
|
write_via_reg(VIA2, vDirA, 0x00);
|
|
while ((read_via_reg(VIA2, 0x200) == 0x07) &&
|
|
(delay >= 0))
|
|
delay--;
|
|
|
|
if (delay < 0) {
|
|
rval = 0xffffcd38;
|
|
break; /* timeout */
|
|
}
|
|
}
|
|
|
|
/* send PM command */
|
|
if ((rval = pm_send_pm2((u_char)(pm_cmd & 0xff))))
|
|
break; /* timeout */
|
|
|
|
/* send number of PM data */
|
|
num_pm_data = pmdata->num_data;
|
|
if (HwCfgFlags3 & 0x00020000) { /* PB Duo, PB 5XX */
|
|
if (pm_send_cmd_type[pm_cmd] < 0) {
|
|
if ((rval = pm_send_pm2((u_char)(num_pm_data & 0xff))) != 0)
|
|
break; /* timeout */
|
|
pmdata->command = 0;
|
|
}
|
|
} else { /* PB 1XX series ? */
|
|
if ((rval = pm_send_pm2((u_char)(num_pm_data & 0xff))) != 0)
|
|
break; /* timeout */
|
|
}
|
|
/* send PM data */
|
|
pm_buf = (u_char *)pmdata->s_buf;
|
|
for (i = 0 ; i < num_pm_data; i++)
|
|
if ((rval = pm_send_pm2(pm_buf[i])) != 0)
|
|
break; /* timeout */
|
|
if (i != num_pm_data)
|
|
break; /* timeout */
|
|
|
|
|
|
/* check if PM will send me data */
|
|
pm_num_rx_data = pm_receive_cmd_type[pm_cmd];
|
|
pmdata->num_data = pm_num_rx_data;
|
|
if (pm_num_rx_data == 0) {
|
|
rval = 0;
|
|
break; /* no return data */
|
|
}
|
|
|
|
/* receive PM command */
|
|
pm_data = pmdata->command;
|
|
if (HwCfgFlags3 & 0x00020000) { /* PB Duo, PB 5XX */
|
|
pm_num_rx_data--;
|
|
if (pm_num_rx_data == 0)
|
|
if ((rval = pm_receive_pm2(&pm_data)) != 0) {
|
|
rval = 0xffffcd37;
|
|
break;
|
|
}
|
|
pmdata->command = pm_data;
|
|
} else { /* PB 1XX series ? */
|
|
if ((rval = pm_receive_pm2(&pm_data)) != 0) {
|
|
rval = 0xffffcd37;
|
|
break;
|
|
}
|
|
pmdata->command = pm_data;
|
|
}
|
|
|
|
/* receive number of PM data */
|
|
if (HwCfgFlags3 & 0x00020000) { /* PB Duo, PB 5XX */
|
|
if (pm_num_rx_data < 0) {
|
|
if ((rval = pm_receive_pm2(&pm_data)) != 0)
|
|
break; /* timeout */
|
|
num_pm_data = pm_data;
|
|
} else
|
|
num_pm_data = pm_num_rx_data;
|
|
pmdata->num_data = num_pm_data;
|
|
} else { /* PB 1XX serias ? */
|
|
if ((rval = pm_receive_pm2(&pm_data)) != 0)
|
|
break; /* timeout */
|
|
num_pm_data = pm_data;
|
|
pmdata->num_data = num_pm_data;
|
|
}
|
|
|
|
/* receive PM data */
|
|
pm_buf = (u_char *)pmdata->r_buf;
|
|
for (i = 0; i < num_pm_data; i++) {
|
|
if ((rval = pm_receive_pm2(&pm_data)) != 0)
|
|
break; /* timeout */
|
|
pm_buf[i] = pm_data;
|
|
}
|
|
|
|
rval = 0;
|
|
}
|
|
|
|
/* restore former value */
|
|
write_via_reg(VIA1, vIER, via1_vIER);
|
|
splx(s);
|
|
|
|
return rval;
|
|
}
|
|
|
|
|
|
/*
|
|
* My PM interrupt routine for the PB Duo series and the PB 5XX series
|
|
*/
|
|
void
|
|
pm_intr_pm2()
|
|
{
|
|
int s;
|
|
int rval;
|
|
PMData pmdata;
|
|
|
|
s = splhigh();
|
|
|
|
PM_VIA_CLR_INTR(); /* clear VIA1 interrupt */
|
|
/* ask PM what happend */
|
|
pmdata.command = 0x78;
|
|
pmdata.num_data = 0;
|
|
pmdata.s_buf = &pmdata.data[2];
|
|
pmdata.r_buf = &pmdata.data[2];
|
|
rval = pm_pmgrop_pm2(&pmdata);
|
|
if (rval != 0) {
|
|
#ifdef ADB_DEBUG
|
|
if (adb_debug)
|
|
printf("pm: PM is not ready. error code: %08x\n", rval);
|
|
#endif
|
|
splx(s);
|
|
}
|
|
|
|
switch ((u_int)(pmdata.data[2] & 0xff)) {
|
|
case 0x00: /* 1 sec interrupt? */
|
|
break;
|
|
case 0x80: /* 1 sec interrupt? */
|
|
pm_counter++;
|
|
break;
|
|
case 0x08: /* Brightness/Contrast button on LCD panel */
|
|
/* get brightness and contrast of the LCD */
|
|
pm_LCD_brightness = (u_int)pmdata.data[3] & 0xff;
|
|
pm_LCD_contrast = (u_int)pmdata.data[4] & 0xff;
|
|
/*
|
|
pm_printerr("#08", rval, pmdata.num_data, pmdata.data);
|
|
pmdata.command = 0x33;
|
|
pmdata.num_data = 1;
|
|
pmdata.s_buf = pmdata.data;
|
|
pmdata.r_buf = pmdata.data;
|
|
pmdata.data[0] = pm_LCD_contrast;
|
|
rval = pm_pmgrop_pm2(&pmdata);
|
|
pm_printerr("#33", rval, pmdata.num_data, pmdata.data);
|
|
*/
|
|
/* this is an experimental code */
|
|
pmdata.command = 0x41;
|
|
pmdata.num_data = 1;
|
|
pmdata.s_buf = pmdata.data;
|
|
pmdata.r_buf = pmdata.data;
|
|
pm_LCD_brightness = 0x7f - pm_LCD_brightness / 2;
|
|
if (pm_LCD_brightness < 0x08)
|
|
pm_LCD_brightness = 0x08;
|
|
if (pm_LCD_brightness > 0x78)
|
|
pm_LCD_brightness = 0x78;
|
|
pmdata.data[0] = pm_LCD_brightness;
|
|
rval = pm_pmgrop_pm2(&pmdata);
|
|
break;
|
|
case 0x10: /* ADB data that were requested by TALK command */
|
|
case 0x14:
|
|
pm_adb_get_TALK_result(&pmdata);
|
|
break;
|
|
case 0x16: /* ADB device event */
|
|
case 0x18:
|
|
case 0x1e:
|
|
pm_adb_get_ADB_data(&pmdata);
|
|
break;
|
|
default:
|
|
#ifdef ADB_DEBUG
|
|
if (adb_debug)
|
|
pm_printerr("driver does not supported this event.",
|
|
pmdata.data[2], pmdata.num_data,
|
|
pmdata.data);
|
|
#endif
|
|
break;
|
|
}
|
|
|
|
splx(s);
|
|
}
|
|
|
|
|
|
/*
|
|
* My PMgrOp routine
|
|
*/
|
|
int
|
|
pmgrop(pmdata)
|
|
PMData *pmdata;
|
|
{
|
|
switch (pmHardware) {
|
|
case PM_HW_PB1XX:
|
|
return (pm_pmgrop_pm1(pmdata));
|
|
break;
|
|
case PM_HW_PB5XX:
|
|
return (pm_pmgrop_pm2(pmdata));
|
|
break;
|
|
default:
|
|
/* return (pmgrop_mrg(pmdata)); */
|
|
return 1;
|
|
}
|
|
}
|
|
|
|
|
|
/*
|
|
* My PM interrupt routine
|
|
*/
|
|
void
|
|
pm_intr()
|
|
{
|
|
switch (pmHardware) {
|
|
case PM_HW_PB1XX:
|
|
pm_intr_pm1();
|
|
break;
|
|
case PM_HW_PB5XX:
|
|
pm_intr_pm2();
|
|
break;
|
|
default:
|
|
break;
|
|
}
|
|
}
|
|
|
|
|
|
|
|
/*
|
|
* Synchronous ADBOp routine for the Power Manager
|
|
*/
|
|
int
|
|
pm_adb_op(buffer, compRout, data, command)
|
|
u_char *buffer;
|
|
void *compRout;
|
|
void *data;
|
|
int command;
|
|
{
|
|
int i;
|
|
int s;
|
|
int rval;
|
|
int timo;
|
|
PMData pmdata;
|
|
struct adbCommand packet;
|
|
|
|
if (adbWaiting == 1)
|
|
return 1;
|
|
|
|
s = splhigh();
|
|
write_via_reg(VIA1, vIER, 0x10);
|
|
|
|
adbBuffer = buffer;
|
|
adbCompRout = compRout;
|
|
adbCompData = data;
|
|
|
|
pmdata.command = 0x20;
|
|
pmdata.s_buf = pmdata.data;
|
|
pmdata.r_buf = pmdata.data;
|
|
|
|
/* if the command is LISTEN, add number of ADB data to number of PM data */
|
|
if ((command & 0xc) == 0x8) {
|
|
if (buffer != (u_char *)0)
|
|
pmdata.num_data = buffer[0] + 3;
|
|
} else {
|
|
pmdata.num_data = 3;
|
|
}
|
|
|
|
pmdata.data[0] = (u_char)(command & 0xff);
|
|
pmdata.data[1] = 0;
|
|
if ((command & 0xc) == 0x8) { /* if the command is LISTEN, copy ADB data to PM buffer */
|
|
if ((buffer != (u_char *)0) && (buffer[0] <= 24)) {
|
|
pmdata.data[2] = buffer[0]; /* number of data */
|
|
for (i = 0; i < buffer[0]; i++)
|
|
pmdata.data[3 + i] = buffer[1 + i];
|
|
} else
|
|
pmdata.data[2] = 0;
|
|
} else
|
|
pmdata.data[2] = 0;
|
|
|
|
if ((command & 0xc) != 0xc) { /* if the command is not TALK */
|
|
/* set up stuff for adb_pass_up */
|
|
packet.data[0] = 1 + pmdata.data[2];
|
|
packet.data[1] = command;
|
|
for (i = 0; i < pmdata.data[2]; i++)
|
|
packet.data[i+2] = pmdata.data[i+3];
|
|
packet.saveBuf = adbBuffer;
|
|
packet.compRout = adbCompRout;
|
|
packet.compData = adbCompData;
|
|
packet.cmd = command;
|
|
packet.unsol = 0;
|
|
packet.ack_only = 1;
|
|
adb_polling = 1;
|
|
adb_pass_up(&packet);
|
|
adb_polling = 0;
|
|
}
|
|
|
|
rval = pmgrop(&pmdata);
|
|
if (rval != 0) {
|
|
splx(s);
|
|
return 1;
|
|
}
|
|
|
|
delay(10000);
|
|
|
|
adbWaiting = 1;
|
|
adbWaitingCmd = command;
|
|
|
|
PM_VIA_INTR_ENABLE();
|
|
|
|
/* wait until the PM interrupt has occurred */
|
|
timo = 0x80000;
|
|
while (adbWaiting == 1) {
|
|
if (read_via_reg(VIA1, vIFR) & 0x14)
|
|
pm_intr();
|
|
#ifdef PM_GRAB_SI
|
|
#if 0
|
|
zshard(0); /* grab any serial interrupts */
|
|
#else
|
|
(void)intr_dispatch(0x70);
|
|
#endif
|
|
#endif
|
|
if ((--timo) < 0) {
|
|
splx(s);
|
|
return 1;
|
|
}
|
|
}
|
|
|
|
/* this command enables the interrupt by operating ADB devices */
|
|
if (HwCfgFlags3 & 0x00020000) { /* PB Duo series, PB 5XX series */
|
|
pmdata.command = 0x20;
|
|
pmdata.num_data = 4;
|
|
pmdata.s_buf = pmdata.data;
|
|
pmdata.r_buf = pmdata.data;
|
|
pmdata.data[0] = 0x00;
|
|
pmdata.data[1] = 0x86; /* magic spell for awaking the PM */
|
|
pmdata.data[2] = 0x00;
|
|
pmdata.data[3] = 0x0c; /* each bit may express the existent ADB device */
|
|
} else { /* PB 1XX series */
|
|
pmdata.command = 0x20;
|
|
pmdata.num_data = 3;
|
|
pmdata.s_buf = pmdata.data;
|
|
pmdata.r_buf = pmdata.data;
|
|
pmdata.data[0] = (u_char)(command & 0xf0) | 0xc;
|
|
pmdata.data[1] = 0x04;
|
|
pmdata.data[2] = 0x00;
|
|
}
|
|
rval = pmgrop(&pmdata);
|
|
|
|
splx(s);
|
|
return rval;
|
|
}
|
|
|
|
|
|
void
|
|
pm_adb_get_TALK_result(pmdata)
|
|
PMData *pmdata;
|
|
{
|
|
int i;
|
|
struct adbCommand packet;
|
|
|
|
/* set up data for adb_pass_up */
|
|
packet.data[0] = pmdata->num_data-1;
|
|
packet.data[1] = pmdata->data[3];
|
|
for (i = 0; i <packet.data[0]-1; i++)
|
|
packet.data[i+2] = pmdata->data[i+4];
|
|
|
|
packet.saveBuf = adbBuffer;
|
|
packet.compRout = adbCompRout;
|
|
packet.compData = adbCompData;
|
|
packet.unsol = 0;
|
|
packet.ack_only = 0;
|
|
adb_polling = 1;
|
|
adb_pass_up(&packet);
|
|
adb_polling = 0;
|
|
|
|
adbWaiting = 0;
|
|
adbBuffer = (long)0;
|
|
adbCompRout = (long)0;
|
|
adbCompData = (long)0;
|
|
}
|
|
|
|
|
|
void
|
|
pm_adb_get_ADB_data(pmdata)
|
|
PMData *pmdata;
|
|
{
|
|
int i;
|
|
struct adbCommand packet;
|
|
|
|
/* set up data for adb_pass_up */
|
|
packet.data[0] = pmdata->num_data-1; /* number of raw data */
|
|
packet.data[1] = pmdata->data[3]; /* ADB command */
|
|
for (i = 0; i <packet.data[0]-1; i++)
|
|
packet.data[i+2] = pmdata->data[i+4];
|
|
packet.unsol = 1;
|
|
packet.ack_only = 0;
|
|
adb_pass_up(&packet);
|
|
}
|
|
|
|
|
|
void
|
|
pm_adb_poll_next_device_pm1(pmdata)
|
|
PMData *pmdata;
|
|
{
|
|
int i;
|
|
int ndid;
|
|
u_short bendid = 0x1;
|
|
int rval;
|
|
PMData tmp_pmdata;
|
|
|
|
/* find another existent ADB device to poll */
|
|
for (i = 1; i < 16; i++) {
|
|
ndid = (ADB_CMDADDR(pmdata->data[3]) + i) & 0xf;
|
|
bendid <<= ndid;
|
|
if ((pm_existent_ADB_devices & bendid) != 0)
|
|
break;
|
|
}
|
|
|
|
/* poll the other device */
|
|
tmp_pmdata.command = 0x20;
|
|
tmp_pmdata.num_data = 3;
|
|
tmp_pmdata.s_buf = tmp_pmdata.data;
|
|
tmp_pmdata.r_buf = tmp_pmdata.data;
|
|
tmp_pmdata.data[0] = (u_char)(ndid << 4) | 0xc;
|
|
tmp_pmdata.data[1] = 0x04; /* magic spell for awaking the PM */
|
|
tmp_pmdata.data[2] = 0x00;
|
|
rval = pmgrop(&tmp_pmdata);
|
|
}
|
|
|
|
void
|
|
pm_adb_restart()
|
|
{
|
|
PMData p;
|
|
|
|
p.command = PMU_RESET_CPU;
|
|
p.num_data = 0;
|
|
p.s_buf = p.data;
|
|
p.r_buf = p.data;
|
|
pmgrop(&p);
|
|
}
|
|
|
|
void
|
|
pm_adb_poweroff()
|
|
{
|
|
PMData p;
|
|
|
|
p.command = PMU_POWER_OFF;
|
|
p.num_data = 4;
|
|
p.s_buf = p.data;
|
|
p.r_buf = p.data;
|
|
strcpy(p.data, "MATT");
|
|
pmgrop(&p);
|
|
}
|
|
|
|
void
|
|
pm_read_date_time(time)
|
|
u_long *time;
|
|
{
|
|
PMData p;
|
|
|
|
p.command = PMU_READ_RTC;
|
|
p.num_data = 0;
|
|
p.s_buf = p.data;
|
|
p.r_buf = p.data;
|
|
pmgrop(&p);
|
|
|
|
memcpy(time, p.data, 4);
|
|
}
|
|
|
|
void
|
|
pm_set_date_time(time)
|
|
u_long time;
|
|
{
|
|
PMData p;
|
|
|
|
p.command = PMU_SET_RTC;
|
|
p.num_data = 4;
|
|
p.s_buf = p.r_buf = p.data;
|
|
memcpy(p.data, &time, 4);
|
|
pmgrop(&p);
|
|
}
|
|
|
|
int
|
|
pm_read_brightness()
|
|
{
|
|
PMData p;
|
|
|
|
p.command = PMU_READ_BRIGHTNESS;
|
|
p.num_data = 1; /* XXX why 1? */
|
|
p.s_buf = p.r_buf = p.data;
|
|
p.data[0] = 0;
|
|
pmgrop(&p);
|
|
|
|
return p.data[0];
|
|
}
|
|
|
|
void
|
|
pm_set_brightness(val)
|
|
int val;
|
|
{
|
|
PMData p;
|
|
|
|
val = 0x7f - val / 2;
|
|
if (val < 0x08)
|
|
val = 0x08;
|
|
if (val > 0x78)
|
|
val = 0x78;
|
|
|
|
p.command = PMU_SET_BRIGHTNESS;
|
|
p.num_data = 1;
|
|
p.s_buf = p.r_buf = p.data;
|
|
p.data[0] = val;
|
|
pmgrop(&p);
|
|
}
|
|
|
|
void
|
|
pm_init_brightness()
|
|
{
|
|
int val;
|
|
|
|
val = pm_read_brightness();
|
|
pm_set_brightness(val);
|
|
}
|
|
|
|
void
|
|
pm_eject_pcmcia(slot)
|
|
int slot;
|
|
{
|
|
PMData p;
|
|
|
|
if (slot != 0 && slot != 1)
|
|
return;
|
|
|
|
p.command = PMU_EJECT_PCMCIA;
|
|
p.num_data = 1;
|
|
p.s_buf = p.r_buf = p.data;
|
|
p.data[0] = 5 + slot; /* XXX */
|
|
pmgrop(&p);
|
|
}
|
|
|
|
int
|
|
pm_read_nvram(addr)
|
|
int addr;
|
|
{
|
|
PMData p;
|
|
|
|
p.command = PMU_READ_NVRAM;
|
|
p.num_data = 2;
|
|
p.s_buf = p.r_buf = p.data;
|
|
p.data[0] = addr >> 8;
|
|
p.data[1] = addr;
|
|
pmgrop(&p);
|
|
|
|
return p.data[0];
|
|
}
|
|
|
|
void
|
|
pm_write_nvram(addr, val)
|
|
int addr, val;
|
|
{
|
|
PMData p;
|
|
|
|
p.command = PMU_WRITE_NVRAM;
|
|
p.num_data = 3;
|
|
p.s_buf = p.r_buf = p.data;
|
|
p.data[0] = addr >> 8;
|
|
p.data[1] = addr;
|
|
p.data[2] = val;
|
|
pmgrop(&p);
|
|
}
|