Aren/NetBSD
1
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity
fab192f2d2
NetBSD/sys/arch/amiga/conf/GENERIC
itojun e9a0023b37 bring in content of GENERIC.v6 into GENERIC. 
remove GENERIC.v6 file (as it is part of GENERIC now).

"faith" interface is commented out by default as it is not really for
general use.
IPsec items are commented out as well, though we can enable "options IPSEC"
without export-related issue ("options IPSEC" will enable authentication
portion only).  We may need to think about it again.

if you have problem compiling with INET6 on archs I do not have access to,
please contact me.

XXX what to do with arch/arm32/SHARK{,.v6}?
1999-11-21 14:00:37 +00:00

403 lines
13 KiB
Plaintext
Raw Blame History

# $NetBSD: GENERIC,v 1.131 1999/11/21 14:00:38 itojun Exp $
#
#if 0
# GENERIC Amiga or DraCo
#
# This configuration file contains all possible options
#
# make AMIGA extracts the AMIGA configuration file.
# make DRACO extracts the DRACO configuration file.
#endif
#
include "arch/amiga/conf/std.amiga"
maxusers 8
options RTC_OFFSET=0
#
# mainboards to support (in addition to Amiga)
#
#ifdef DRACO_CONFIGURATION
options DRACO
#endif
#ifdef AMIGA_CONFIGURATION
options BB060STUPIDROM # You need this, if you have a non-DraCo
# MC68060 with an OS ROM up to (at least)
# V40 (OS3.1) and want to boot with the
# bootblock.
# You do not need this if you have a DraCo,
# have no 68060 or NEVER use the bootblock
options P5PPC68KBOARD # Phase5 PPC/68K board support
#endif
#
# processors this kernel should support
#
options M68060 # support for 060
options M060SP # MC68060 software support (Required for 060)
#ifdef AMIGA_CONFIGURATION
options M68040 # support for 040
options FPSP # MC68040 floating point support
options M68030 # support for 030
options M68020 # support for 020/851
options FPU_EMULATE # FPU emulation
#endif
# Pull in config fragments for kernel crypto. This is required for
# options IPSEC etc. to work. If you want to run with IPSEC, uncomment
# one of these, based on whether you use crypto-us or crypto-intl, and
# adjust the prefixes as necessary.
#prefix ../crypto-us/sys
#cinclude "conf/files.crypto-us"
#prefix
#prefix ../crypto-intl/sys
#cinclude "conf/files.crypto-intl"
#prefix
#
# Networking options
#
options INET # IP networking support (Required)
options INET6 # IPV6
#options IPSEC # IP security
#options IPSEC_ESP # IP security (encryption part; define w/IPSEC)
#options IPSEC_DEBUG # debug for IP security
#options GATEWAY # Packet forwarding
#options DIRECTED_BROADCAST # Broadcast across subnets
#options MROUTING # Multicast routing
options NS # XNS
#options NSIP # XNS tunneling over IP
options ISO,TPIP # OSI
options EON # OSI tunneling over IP
options CCITT,LLC,HDLC # X.25
options NETATALK # AppleTalk networking protocols
options PPP_BSDCOMP # BSD-Compress compression support for PPP
options PPP_DEFLATE # Deflate compression support for PPP
options PPP_FILTER # Active filter support for PPP (requires bpf)
options PFIL_HOOKS # pfil(9) packet filter hooks
options IPFILTER_LOG # ipmon(8) log support
# Filesystems
file-system FFS # Berkeley fast file system
file-system EXT2FS # second extended file system (linux)
#file-system LFS # log-structured filesystem (experimental)
file-system MFS # Memory based filesystem
file-system NFS # Network File System client side code
file-system ADOSFS # AmigaDOS file system
file-system CD9660 # ISO 9660 + Rock Ridge filesystem
file-system MSDOSFS # MS-DOS filesystem
file-system FDESC # user file descriptor filesystem
file-system KERNFS # kernel data-structure filesystem
file-system NULLFS # loopback filesystem
#file-system PORTAL # Portal filesystem
file-system PROCFS # /proc filesystem
file-system UMAPFS # NULLFS + uid and gid remapping
file-system UNION # union filesystem
# Filesystem options
options QUOTA # User and group quotas in FFS
#options FFS_EI # FFS Endian Independant support
#options SOFTDEP # FFS soft updates support.
options NFSSERVER # Network File System server side code
#options EXT2FS_SYSTEM_FLAGS # makes ext2fs file flags (append and
# immutable) behave as system flags.
#
# Compatability options for various existing systems
#
options TCP_COMPAT_42 # compatibility with 4.2BSD TCP/IP
options COMPAT_43 # compatibility with 4.3BSD interfaces
options COMPAT_09 # compatibility with NetBSD 0.9
options COMPAT_10 # compatibility with NetBSD 1.0
options COMPAT_12 # compatibility with NetBSD 1.2
options COMPAT_13 # compatibility with NetBSD 1.3
options COMPAT_14 # compatibility with NetBSD 1.4
options COMPAT_SUNOS # Support to run Sun (m68k) executables
options COMPAT_SVR4 # Support to run SVR4 (m68k) executables
options COMPAT_NOMID # allow nonvalid machine id executables
#options COMPAT_LINUX # Support to run Linux/m68k executables
options EXEC_ELF32 # 32-bit ELF executables (Linux, SVR4)
#
# Support for System V IPC facilities.
#
options SYSVSHM # System V-like shared memory
options SYSVMSG # System V-like messages
options SYSVSEM # System V-like semaphores
#
# Support for various kernel options
#
options KTRACE # system call tracing support
options LKM # Loadable kernel modules
options NKMEMCLUSTERS=256 # Size of kernel malloc area
options UCONSOLE # anyone can redirect a virtual console
#options INSECURE # allow, among other insecure stuff, LKM
# loading in multi-user mode.
options SCSIVERBOSE # Verbose SCSI errors
options NTP # NTP phase/frequency locked loop
#
# Misc. debugging options
#
options DDB # Kernel debugger
#options DDB_HISTORY_SIZE=100 # Enable history editing in DDB
options DIAGNOSTIC # Extra kernel sanity checks
#options DEBUG # Enable misc. kernel debugging code
#options SYSCALL_DEBUG # debug all syscalls.
#options SCSIDEBUG # Add SCSI debugging statements
#options PANICBUTTON # Forced crash via keypress (???)
#
# Amiga specific options
#
#options LIMITMEM=24 # Do not use more than LIMITMEM MB of the
# first bank of RAM. (default: unlimited)
#options NKPTADD=4 # set this for 4 additional KPT pages
#options NKPTADDSHIFT=24 # set this for 1 additional KPT page
# per 16 MB (1<<24 bytes) of RAM
# define and decrease this, or define and
# increase NKPTADD if you get "out of PT pages"
# panics.
# ATTENTION: There is NO WARRANTY AT ALL that the sync will be complete
# before the 10 secondinterval ends, or that KBDRESET does work at all.
#options KBDRESET # sync on Ctrl-Amiga-Amiga
# These options improve performance with the built-in serial port
# on slower Amigas. Try the larger buffers first then lev6_defer.
#options SERIBUF_SIZE=4096
#options SEROBUF_SIZE=32
#options LEV6_DEFER # defers l6 to l4 (below serial l5)
options RETINACONSOLE # enable code to allow retina to be console
#ifdef AMIGA_CONFIGURATION
options ULOWELLCONSOLE # enable code to allow a2410 to be console
options CL5426CONSOLE # Cirrus console
options CV64CONSOLE # CyberVision console
options TSENGCONSOLE # Tseng console
options CV3DCONSOLE # CyberVision 64/3D console
#endif
#ifdef AMIGA_CONFIGURATION
options GRF_ECS # Enhanced Chip Set
options GRF_NTSC # NTSC
options GRF_PAL # PAL
options GRF_A2024 # Support for the A2024
options GRF_AGA # AGA Chip Set
options GRF_AGA_VGA # AGA VGAONLY timing
options GRF_SUPER72 # AGA Super-72
#endif
#options KFONT_8X11 # 8x11 font
# This is how you would tell the kernel the A2410 oscillator frequencies:
# The used frequencies are the defaults, and do not need option setting
#options ULOWELL_OSC1=36000000
#options ULOWELL_OSC2=66667000
# This is how you specify the blitting speed, higher values may speed up blits
# a littel bit. If you raise this value too much some trash may appear.
# the commented version is the default.
#options RH_MEMCLK=61000000
# this option enables the 64 bit sprite which does not work
# for quite a few people. E.g. The cursor sprite will turn to a block
# when moved to the top of the screen in X.
#options RH_64BIT_SPRITE
# enables fast scroll code appears to now work on 040 systems.
#options RETINA_SPEED_HACK
# enables the Hardwarecursor which does not work on some systems.
#options RH_HARDWARECURSOR
#ifdef AMIGA_CONFIGURATION
grfcc0 at mainbus0 # custom chips
grfrt0 at zbus0 # retina II
#endif
grfrh0 at zbus0 # retina III
#ifdef AMIGA_CONFIGURATION
grfcl* at zbus0 # Picasso II/Piccalo/Spectrum
grful0 at zbus0 # A2410
grfcv0 at zbus0 # CyberVision 64
grfet* at zbus0 # Tseng (oMniBus, Domino, Merlin)
grfcv3d0 at zbus0 # CyberVision 64/3D
#endif
#ifdef AMIGA_CONFIGURATION
grf0 at grfcc0
grf1 at grfrt0
#endif
grf2 at grfrh0
#ifdef AMIGA_CONFIGURATION
grf3 at grfcl?
grf4 at grful0
grf5 at grfcv0
grf6 at grfet?
grf7 at grfcv3d0
#endif
#ifdef AMIGA_CONFIGURATION
ite0 at grf0 # terminal emulators for grfs
ite1 at grf1 # terminal emulators for grfs
#endif
ite2 at grf2 # terminal emulators for grfs
#ifdef AMIGA_CONFIGURATION
ite3 at grf3 # terminal emulators for grfs
ite4 at grf4 # terminal emulators for grfs
ite5 at grf5 # terminal emulators for grfs
ite6 at grf6 # terminal emulators for grfs
ite7 at grf7 # terminal emulators for grfs
#endif
msc0 at zbus0 # A2232 MSC multiport serial.
mfc0 at zbus0 # MultiFaceCard I/O board
mfcs0 at mfc0 unit 0 # MFC serial
mfcs1 at mfc0 unit 1 # MFC serial
#mfcp0 at mfc0 unit 0 # MFC parallel [not available yet]
#mfc1 at zbus0 # MultiFaceCard 2nd I/O board
#mfcs2 at mfc1 unit 0
#mfcs3 at mfc1 unit 1
#mfcp1 at mfc1 unit 0
hyper* at zbus? # zbus HyperCom3/3+/4/4+
#hyper* at mainbus0 # not yet: HyperCom1 + HyperCom3
com* at hyper? port ? # Hypercom3/4 serial ports
lpt* at hyper? port ? # Hypercom3+/4+ parallel port
#ifdef AMIGA_CONFIGURATION
#
# Amiga Mainboard devices (sans graphics and keyboard)
#
ser0 at mainbus0 # Amiga onboard serial
par0 at mainbus0 # Amiga onboard parallel
ms* at mainbus0 # Amiga mice
fdc0 at mainbus0 # Amiga FDC
fd* at fdc0 unit ? # floppy disks on the later
a34kbbc0 at mainbus0 # A3000/A4000 battery backed clock
a2kbbc0 at mainbus0 # A2000 battery backed clock
aucc* at mainbus0 # Amiga CC audio
audio* at aucc?
#endif
#ifdef DRACO_CONFIGURATION
#
# DraCo Mainboard devices (sans keyboard)
#
drbbc0 at mainbus0 # DraCo battery backed clock
drsupio0 at mainbus0 # DraCo superio chip
com* at drsupio? port ? # DraCo serial
lpt0 at drsupio? port ? # DraCo parallel
#endif
#
# Zorro-II, Zorro-III, DraCo Direct-Bus devices (sans graphics)
#
#ifndef DRACO_CONFIGURATION
# Alas, Melody-Z2 dont configure in the DraCo bus.
melody* at zbus0 # Melody MPEG audio decoder
audio* at melody?
#endif
# Ethernet cards:
le* at zbus0 # A2065, Ameristar, Ariadne
ne* at zbus0 # AriadneII
ed* at zbus0 # Hydra, ASDG LanRover
es* at zbus0 # CEI A4066 EthernetPLUS
qn* at zbus0 # Quicknet
# Arcnet
bah* at zbus0 # C=/Ameristar A2060 / 560
#ifdef AMIGA_CONFIGURATION
# Greater Valley Product Bus
gvpbus* at zbus0
# scsi stuff, all possible
gtsc0 at gvpbus? # GVP series II scsi
scsibus* at gtsc0
ahsc0 at mainbus0 # A3000 scsi
scsibus* at ahsc0
atzsc0 at zbus0 # A2091 scsi
scsibus* at atzsc0
wstsc0 at zbus0 # Wordsync II scsi
scsibus* at wstsc0
ivsc0 at zbus0 # IVS scsi
scsibus* at ivsc0
mlhsc0 at zbus0 # Hacker scsi
scsibus* at mlhsc0
otgsc0 at zbus0 # 12 gauge scsi
scsibus* at otgsc0
zssc0 at zbus0 # Zeus scsi
scsibus* at zssc0
mgnsc0 at zbus0 # Magnum scsi
scsibus* at mgnsc0
wesc0 at zbus0 # Warp Engine scsi
scsibus* at wesc0
afsc0 at zbus0 # A4091 scsi
scsibus* at afsc0
aftsc0 at mainbus0 # A4000T scsi
scsibus* at aftsc0
flsc0 at zbus0 # FastlaneZ3 scsi
scsibus* at flsc0
bzsc0 at zbus0 # Blizzard 1230 I,II scsi
scsibus* at bzsc0
bzivsc0 at zbus0 # Blizzard 12x0 IV scsi
scsibus* at bzivsc0
bztzsc0 at zbus0 # Blizzard 2060 scsi
scsibus* at bztzsc0
cbsc0 at zbus0 # CyberSCSI I
scsibus* at cbsc0
cbiisc0 at zbus0 # CyberSCSI II
scsibus* at cbiisc0
cbiiisc0 at zbus0 # Cyberstorm mk.III/Cyberstorm PPC SCSI
scsibus* at cbiiisc0
empsc0 at zbus0 # Emplant scsi
scsibus* at empsc0
idesc0 at mainbus0 # A4000 & A1200 IDE
scsibus* at idesc0
#endif
#ifdef DRACO_CONFIGURATION
drsc0 at mainbus0 # DraCo scsi
scsibus* at drsc0
#endif
# each hard drive from low target to high
# will configure to the next available sd unit number
sd* at scsibus? target ? lun ? # scsi disks
st* at scsibus? target ? lun ? # scsi tapes
cd* at scsibus? target ? lun ? # scsi cds
ss* at scsibus? target ? lun ? # scsi scanner
ch* at scsibus? target ? lun ? # scsi autochangers
uk* at scsibus? target ? lun ? # scsi unknown
pseudo-device loop # loopback network interface
pseudo-device sl 1 # SLIP network interfaces
pseudo-device ppp 1 # PPP network interfaces
pseudo-device tun 1 # network tunnel line discipline
#pseudo-device gre 2 # generic L3 over IP tunnel
#pseudo-device ipip 2 # IP Encapsulation within IP (RFC 2003)
pseudo-device bpfilter 16 # Berkeley packet filter
pseudo-device ipfilter # IP Filter package
pseudo-device gif 4 # IPv[46] over IPv[46] tunnel (RFC1933)
#pseudo-device faith 1 # IPv[46] tcp relay translation i/f
pseudo-device view 4 # views (needed for grfcc)
pseudo-device pty 16 # pseudo ptys
pseudo-device vnd 4 # vnode pseudo-disks
pseudo-device ccd 4 # concatenated disk devices
#pseudo-device raid 4 # RAIDframe disk driver
# rnd is EXPERIMENTAL at this point.
#pseudo-device rnd # /dev/random and in-kernel generator
#options RND_COM # use "com" randomness as well (BROKEN)
config netbsd root on ? type ?
Reference in New Issue View Git Blame Copy Permalink