NetBSD/sys/dev/ic/bha.c

2005 lines
48 KiB
C

/* $NetBSD: bha.c,v 1.48 2001/11/15 09:48:05 lukem Exp $ */
/*-
* Copyright (c) 1997, 1998, 1999 The NetBSD Foundation, Inc.
* All rights reserved.
*
* This code is derived from software contributed to The NetBSD Foundation
* by Charles M. Hannum and by Jason R. Thorpe of the Numerical Aerospace
* Simulation Facility, NASA Ames Research Center.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in the
* documentation and/or other materials provided with the distribution.
* 3. All advertising materials mentioning features or use of this software
* must display the following acknowledgement:
* This product includes software developed by the NetBSD
* Foundation, Inc. and its contributors.
* 4. Neither the name of The NetBSD Foundation nor the names of its
* contributors may be used to endorse or promote products derived
* from this software without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE NETBSD FOUNDATION, INC. AND CONTRIBUTORS
* ``AS IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED
* TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
* PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE FOUNDATION OR CONTRIBUTORS
* BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
* CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
* SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
* INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
* CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
* ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
* POSSIBILITY OF SUCH DAMAGE.
*/
/*
* Originally written by Julian Elischer (julian@tfs.com)
* for TRW Financial Systems for use under the MACH(2.5) operating system.
*
* TRW Financial Systems, in accordance with their agreement with Carnegie
* Mellon University, makes this software available to CMU to distribute
* or use in any manner that they see fit as long as this message is kept with
* the software. For this reason TFS also grants any other persons or
* organisations permission to use or modify this software.
*
* TFS supplies this software to be publicly redistributed
* on the understanding that TFS is not responsible for the correct
* functioning of this software in any circumstances.
*/
#include <sys/cdefs.h>
__KERNEL_RCSID(0, "$NetBSD: bha.c,v 1.48 2001/11/15 09:48:05 lukem Exp $");
#include "opt_ddb.h"
#include <sys/param.h>
#include <sys/systm.h>
#include <sys/callout.h>
#include <sys/kernel.h>
#include <sys/errno.h>
#include <sys/ioctl.h>
#include <sys/device.h>
#include <sys/malloc.h>
#include <sys/buf.h>
#include <sys/proc.h>
#include <sys/user.h>
#include <uvm/uvm_extern.h>
#include <machine/bus.h>
#include <machine/intr.h>
#include <dev/scsipi/scsi_all.h>
#include <dev/scsipi/scsipi_all.h>
#include <dev/scsipi/scsiconf.h>
#include <dev/ic/bhareg.h>
#include <dev/ic/bhavar.h>
#ifndef DDB
#define Debugger() panic("should call debugger here (bha.c)")
#endif /* ! DDB */
#define BHA_MAXXFER ((BHA_NSEG - 1) << PGSHIFT)
#ifdef BHADEBUG
int bha_debug = 0;
#endif /* BHADEBUG */
static int bha_cmd __P((bus_space_tag_t, bus_space_handle_t, char *, int,
u_char *, int, u_char *));
static void bha_scsipi_request __P((struct scsipi_channel *,
scsipi_adapter_req_t, void *));
static void bha_minphys __P((struct buf *));
static void bha_get_xfer_mode __P((struct bha_softc *,
struct scsipi_xfer_mode *));
static void bha_done __P((struct bha_softc *, struct bha_ccb *));
int bha_poll __P((struct bha_softc *, struct scsipi_xfer *, int));
static void bha_timeout __P((void *arg));
static int bha_init __P((struct bha_softc *));
static int bha_create_mailbox __P((struct bha_softc *));
static void bha_collect_mbo __P((struct bha_softc *));
static void bha_queue_ccb __P((struct bha_softc *, struct bha_ccb *));
static void bha_start_ccbs __P((struct bha_softc *));
static void bha_finish_ccbs __P((struct bha_softc *));
struct bha_ccb *bha_ccb_phys_kv __P((struct bha_softc *, bus_addr_t));
void bha_create_ccbs __P((struct bha_softc *, int));
int bha_init_ccb __P((struct bha_softc *, struct bha_ccb *));
struct bha_ccb *bha_get_ccb __P((struct bha_softc *));
void bha_free_ccb __P((struct bha_softc *, struct bha_ccb *));
#define BHA_RESET_TIMEOUT 2000 /* time to wait for reset (mSec) */
#define BHA_ABORT_TIMEOUT 2000 /* time to wait for abort (mSec) */
/*
* Number of CCBs in an allocation group; must be computed at run-time.
*/
int bha_ccbs_per_group;
__inline struct bha_mbx_out *bha_nextmbo __P((struct bha_softc *,
struct bha_mbx_out *));
__inline struct bha_mbx_in *bha_nextmbi __P((struct bha_softc *,
struct bha_mbx_in *));
__inline struct bha_mbx_out *
bha_nextmbo(sc, mbo)
struct bha_softc *sc;
struct bha_mbx_out *mbo;
{
if (mbo == &sc->sc_mbo[sc->sc_mbox_count - 1])
return (&sc->sc_mbo[0]);
return (mbo + 1);
}
__inline struct bha_mbx_in *
bha_nextmbi(sc, mbi)
struct bha_softc *sc;
struct bha_mbx_in *mbi;
{
if (mbi == &sc->sc_mbi[sc->sc_mbox_count - 1])
return (&sc->sc_mbi[0]);
return (mbi + 1);
}
/*
* bha_attach:
*
* Finish attaching a Buslogic controller, and configure children.
*/
void
bha_attach(sc)
struct bha_softc *sc;
{
struct scsipi_adapter *adapt = &sc->sc_adapter;
struct scsipi_channel *chan = &sc->sc_channel;
int initial_ccbs;
/*
* Initialize the number of CCBs per group.
*/
if (bha_ccbs_per_group == 0)
bha_ccbs_per_group = BHA_CCBS_PER_GROUP;
initial_ccbs = bha_info(sc);
if (initial_ccbs == 0) {
printf("%s: unable to get adapter info\n",
sc->sc_dev.dv_xname);
return;
}
/*
* Fill in the scsipi_adapter.
*/
memset(adapt, 0, sizeof(*adapt));
adapt->adapt_dev = &sc->sc_dev;
adapt->adapt_nchannels = 1;
/* adapt_openings initialized below */
adapt->adapt_max_periph = sc->sc_mbox_count;
adapt->adapt_request = bha_scsipi_request;
adapt->adapt_minphys = bha_minphys;
/*
* Fill in the scsipi_channel.
*/
memset(chan, 0, sizeof(*chan));
chan->chan_adapter = adapt;
chan->chan_bustype = &scsi_bustype;
chan->chan_channel = 0;
chan->chan_flags = SCSIPI_CHAN_CANGROW;
chan->chan_ntargets = (sc->sc_flags & BHAF_WIDE) ? 16 : 8;
chan->chan_nluns = (sc->sc_flags & BHAF_WIDE_LUN) ? 32 : 8;
chan->chan_id = sc->sc_scsi_id;
TAILQ_INIT(&sc->sc_free_ccb);
TAILQ_INIT(&sc->sc_waiting_ccb);
TAILQ_INIT(&sc->sc_allocating_ccbs);
if (bha_create_mailbox(sc) != 0)
return;
bha_create_ccbs(sc, initial_ccbs);
if (sc->sc_cur_ccbs < 2) {
printf("%s: not enough CCBs to run\n",
sc->sc_dev.dv_xname);
return;
}
adapt->adapt_openings = sc->sc_cur_ccbs;
if (bha_init(sc) != 0)
return;
(void) config_found(&sc->sc_dev, &sc->sc_channel, scsiprint);
}
/*
* bha_intr:
*
* Interrupt service routine.
*/
int
bha_intr(arg)
void *arg;
{
struct bha_softc *sc = arg;
bus_space_tag_t iot = sc->sc_iot;
bus_space_handle_t ioh = sc->sc_ioh;
u_char sts;
#ifdef BHADEBUG
printf("%s: bha_intr ", sc->sc_dev.dv_xname);
#endif /* BHADEBUG */
/*
* First acknowlege the interrupt, Then if it's not telling about
* a completed operation just return.
*/
sts = bus_space_read_1(iot, ioh, BHA_INTR_PORT);
if ((sts & BHA_INTR_ANYINTR) == 0)
return (0);
bus_space_write_1(iot, ioh, BHA_CTRL_PORT, BHA_CTRL_IRST);
#ifdef BHADIAG
/* Make sure we clear CCB_SENDING before finishing a CCB. */
bha_collect_mbo(sc);
#endif
/* Mail box out empty? */
if (sts & BHA_INTR_MBOA) {
struct bha_toggle toggle;
toggle.cmd.opcode = BHA_MBO_INTR_EN;
toggle.cmd.enable = 0;
bha_cmd(iot, ioh, sc->sc_dev.dv_xname,
sizeof(toggle.cmd), (u_char *)&toggle.cmd,
0, (u_char *)0);
bha_start_ccbs(sc);
}
/* Mail box in full? */
if (sts & BHA_INTR_MBIF)
bha_finish_ccbs(sc);
return (1);
}
/*****************************************************************************
* SCSI interface routines
*****************************************************************************/
/*
* bha_scsipi_request:
*
* Perform a request for the SCSIPI layer.
*/
void
bha_scsipi_request(chan, req, arg)
struct scsipi_channel *chan;
scsipi_adapter_req_t req;
void *arg;
{
struct scsipi_adapter *adapt = chan->chan_adapter;
struct bha_softc *sc = (void *)adapt->adapt_dev;
struct scsipi_xfer *xs;
struct scsipi_periph *periph;
bus_dma_tag_t dmat = sc->sc_dmat;
struct bha_ccb *ccb;
int error, seg, flags, s;
switch (req) {
case ADAPTER_REQ_RUN_XFER:
xs = arg;
periph = xs->xs_periph;
flags = xs->xs_control;
SC_DEBUG(periph, SCSIPI_DB2, ("bha_scsipi_request\n"));
/* Get a CCB to use. */
ccb = bha_get_ccb(sc);
#ifdef DIAGNOSTIC
/*
* This should never happen as we track the resources
* in the mid-layer.
*/
if (ccb == NULL) {
scsipi_printaddr(periph);
printf("unable to allocate ccb\n");
panic("bha_scsipi_request");
}
#endif
ccb->xs = xs;
ccb->timeout = xs->timeout;
/*
* Put all the arguments for the xfer in the ccb
*/
if (flags & XS_CTL_RESET) {
ccb->opcode = BHA_RESET_CCB;
ccb->scsi_cmd_length = 0;
} else {
/* can't use S/G if zero length */
ccb->opcode = (xs->datalen ? BHA_INIT_SCAT_GATH_CCB
: BHA_INITIATOR_CCB);
memcpy(&ccb->scsi_cmd, xs->cmd,
ccb->scsi_cmd_length = xs->cmdlen);
}
if (xs->datalen) {
/*
* Map the DMA transfer.
*/
#ifdef TFS
if (flags & XS_CTL_DATA_UIO) {
error = bus_dmamap_load_uio(dmat,
ccb->dmamap_xfer, (struct uio *)xs->data,
((flags & XS_CTL_NOSLEEP) ? BUS_DMA_NOWAIT :
BUS_DMA_WAITOK) | BUS_DMA_STREAMING |
((flags & XS_CTL_DATA_IN) ? BUS_DMA_READ :
BUS_DMA_WRITE));
} else
#endif /* TFS */
{
error = bus_dmamap_load(dmat,
ccb->dmamap_xfer, xs->data, xs->datalen,
NULL,
((flags & XS_CTL_NOSLEEP) ? BUS_DMA_NOWAIT :
BUS_DMA_WAITOK) | BUS_DMA_STREAMING |
((flags & XS_CTL_DATA_IN) ? BUS_DMA_READ :
BUS_DMA_WRITE));
}
switch (error) {
case 0:
break;
case ENOMEM:
case EAGAIN:
xs->error = XS_RESOURCE_SHORTAGE;
goto out_bad;
default:
xs->error = XS_DRIVER_STUFFUP;
printf("%s: error %d loading DMA map\n",
sc->sc_dev.dv_xname, error);
out_bad:
bha_free_ccb(sc, ccb);
scsipi_done(xs);
return;
}
bus_dmamap_sync(dmat, ccb->dmamap_xfer, 0,
ccb->dmamap_xfer->dm_mapsize,
(flags & XS_CTL_DATA_IN) ? BUS_DMASYNC_PREREAD :
BUS_DMASYNC_PREWRITE);
/*
* Load the hardware scatter/gather map with the
* contents of the DMA map.
*/
for (seg = 0; seg < ccb->dmamap_xfer->dm_nsegs; seg++) {
ltophys(ccb->dmamap_xfer->dm_segs[seg].ds_addr,
ccb->scat_gath[seg].seg_addr);
ltophys(ccb->dmamap_xfer->dm_segs[seg].ds_len,
ccb->scat_gath[seg].seg_len);
}
ltophys(ccb->hashkey + offsetof(struct bha_ccb,
scat_gath), ccb->data_addr);
ltophys(ccb->dmamap_xfer->dm_nsegs *
sizeof(struct bha_scat_gath), ccb->data_length);
} else {
/*
* No data xfer, use non S/G values.
*/
ltophys(0, ccb->data_addr);
ltophys(0, ccb->data_length);
}
if (XS_CTL_TAGTYPE(xs) != 0) {
ccb->tag_enable = 1;
ccb->tag_type = xs->xs_tag_type & 0x03;
} else {
ccb->tag_enable = 0;
ccb->tag_type = 0;
}
ccb->data_out = 0;
ccb->data_in = 0;
ccb->target = periph->periph_target;
ccb->lun = periph->periph_lun;
ltophys(ccb->hashkey + offsetof(struct bha_ccb, scsi_sense),
ccb->sense_ptr);
ccb->req_sense_length = sizeof(ccb->scsi_sense);
ccb->host_stat = 0x00;
ccb->target_stat = 0x00;
ccb->link_id = 0;
ltophys(0, ccb->link_addr);
BHA_CCB_SYNC(sc, ccb, BUS_DMASYNC_PREREAD|BUS_DMASYNC_PREWRITE);
s = splbio();
bha_queue_ccb(sc, ccb);
splx(s);
SC_DEBUG(periph, SCSIPI_DB3, ("cmd_sent\n"));
if ((flags & XS_CTL_POLL) == 0)
return;
/*
* If we can't use interrupts, poll on completion
*/
if (bha_poll(sc, xs, ccb->timeout)) {
bha_timeout(ccb);
if (bha_poll(sc, xs, ccb->timeout))
bha_timeout(ccb);
}
return;
case ADAPTER_REQ_GROW_RESOURCES:
if (sc->sc_cur_ccbs == sc->sc_max_ccbs) {
chan->chan_flags &= ~SCSIPI_CHAN_CANGROW;
return;
}
seg = sc->sc_cur_ccbs;
bha_create_ccbs(sc, bha_ccbs_per_group);
adapt->adapt_openings += sc->sc_cur_ccbs - seg;
return;
case ADAPTER_REQ_SET_XFER_MODE:
/*
* Can't really do this on the Buslogic. It has its
* own setup info. But we do know how to query what
* the settings are.
*/
bha_get_xfer_mode(sc, (struct scsipi_xfer_mode *)arg);
return;
}
}
/*
* bha_minphys:
*
* Limit a transfer to our maximum transfer size.
*/
void
bha_minphys(bp)
struct buf *bp;
{
if (bp->b_bcount > BHA_MAXXFER)
bp->b_bcount = BHA_MAXXFER;
minphys(bp);
}
/*****************************************************************************
* SCSI job execution helper routines
*****************************************************************************/
/*
* bha_get_xfer_mode;
*
* Negotiate the xfer mode for the specified periph, and report
* back the mode to the midlayer.
*
* NOTE: we must be called at splbio().
*/
void
bha_get_xfer_mode(sc, xm)
struct bha_softc *sc;
struct scsipi_xfer_mode *xm;
{
struct bha_setup hwsetup;
struct bha_period hwperiod;
struct bha_sync *bs;
int toff = xm->xm_target & 7, tmask = (1 << toff);
int wide, period, offset, rlen;
/*
* Issue an Inquire Setup Information. We can extract
* sync and wide information from here.
*/
rlen = sizeof(hwsetup.reply) +
((sc->sc_flags & BHAF_WIDE) ? sizeof(hwsetup.reply_w) : 0);
hwsetup.cmd.opcode = BHA_INQUIRE_SETUP;
hwsetup.cmd.len = rlen;
bha_cmd(sc->sc_iot, sc->sc_ioh, sc->sc_dev.dv_xname,
sizeof(hwsetup.cmd), (u_char *)&hwsetup.cmd,
rlen, (u_char *)&hwsetup.reply);
xm->xm_mode = 0;
xm->xm_period = 0;
xm->xm_offset = 0;
/*
* First check for wide. On later boards, we can check
* directly in the setup info if wide is currently active.
*
* On earlier boards, we have to make an educated guess.
*/
if (sc->sc_flags & BHAF_WIDE) {
if (strcmp(sc->sc_firmware, "5.06L") >= 0) {
if (xm->xm_target > 7) {
wide =
hwsetup.reply_w.high_wide_active & tmask;
} else {
wide =
hwsetup.reply_w.low_wide_active & tmask;
}
if (wide)
xm->xm_mode |= PERIPH_CAP_WIDE16;
} else {
/* XXX Check `wide permitted' in the config info. */
xm->xm_mode |= PERIPH_CAP_WIDE16;
}
}
/*
* Now get basic sync info.
*/
bs = (xm->xm_target > 7) ?
&hwsetup.reply_w.sync_high[toff] :
&hwsetup.reply.sync_low[toff];
if (bs->valid) {
xm->xm_mode |= PERIPH_CAP_SYNC;
period = (bs->period * 50) + 20;
offset = bs->offset;
/*
* On boards that can do Fast and Ultra, use the Inquire Period
* command to get the period.
*/
if (sc->sc_firmware[0] >= '3') {
rlen = sizeof(hwperiod.reply) +
((sc->sc_flags & BHAF_WIDE) ?
sizeof(hwperiod.reply_w) : 0);
hwperiod.cmd.opcode = BHA_INQUIRE_PERIOD;
hwperiod.cmd.len = rlen;
bha_cmd(sc->sc_iot, sc->sc_ioh, sc->sc_dev.dv_xname,
sizeof(hwperiod.cmd), (u_char *)&hwperiod.cmd,
rlen, (u_char *)&hwperiod.reply);
if (xm->xm_target > 7)
period = hwperiod.reply_w.period[toff];
else
period = hwperiod.reply.period[toff];
period *= 10;
}
xm->xm_period =
scsipi_sync_period_to_factor(period * 10);
xm->xm_offset = offset;
}
/*
* Now check for tagged queueing support.
*
* XXX Check `tags permitted' in the config info.
*/
if (sc->sc_flags & BHAF_TAGGED_QUEUEING)
xm->xm_mode |= PERIPH_CAP_TQING;
scsipi_async_event(&sc->sc_channel, ASYNC_EVENT_XFER_MODE, xm);
}
/*
* bha_done:
*
* A CCB has completed execution. Pass the status back to the
* upper layer.
*/
void
bha_done(sc, ccb)
struct bha_softc *sc;
struct bha_ccb *ccb;
{
bus_dma_tag_t dmat = sc->sc_dmat;
struct scsipi_xfer *xs = ccb->xs;
SC_DEBUG(xs->xs_periph, SCSIPI_DB2, ("bha_done\n"));
#ifdef BHADIAG
if (ccb->flags & CCB_SENDING) {
printf("%s: exiting ccb still in transit!\n",
sc->sc_dev.dv_xname);
Debugger();
return;
}
#endif
if ((ccb->flags & CCB_ALLOC) == 0) {
printf("%s: exiting ccb not allocated!\n",
sc->sc_dev.dv_xname);
Debugger();
return;
}
/*
* If we were a data transfer, unload the map that described
* the data buffer.
*/
if (xs->datalen) {
bus_dmamap_sync(dmat, ccb->dmamap_xfer, 0,
ccb->dmamap_xfer->dm_mapsize,
(xs->xs_control & XS_CTL_DATA_IN) ? BUS_DMASYNC_POSTREAD :
BUS_DMASYNC_POSTWRITE);
bus_dmamap_unload(dmat, ccb->dmamap_xfer);
}
if (xs->error == XS_NOERROR) {
if (ccb->host_stat != BHA_OK) {
switch (ccb->host_stat) {
case BHA_SEL_TIMEOUT: /* No response */
xs->error = XS_SELTIMEOUT;
break;
default: /* Other scsi protocol messes */
printf("%s: host_stat %x\n",
sc->sc_dev.dv_xname, ccb->host_stat);
xs->error = XS_DRIVER_STUFFUP;
break;
}
} else if (ccb->target_stat != SCSI_OK) {
switch (ccb->target_stat) {
case SCSI_CHECK:
memcpy(&xs->sense.scsi_sense,
&ccb->scsi_sense,
sizeof(xs->sense.scsi_sense));
xs->error = XS_SENSE;
break;
case SCSI_BUSY:
xs->error = XS_BUSY;
break;
default:
printf("%s: target_stat %x\n",
sc->sc_dev.dv_xname, ccb->target_stat);
xs->error = XS_DRIVER_STUFFUP;
break;
}
} else
xs->resid = 0;
}
bha_free_ccb(sc, ccb);
scsipi_done(xs);
}
/*
* bha_poll:
*
* Poll for completion of the specified job.
*/
int
bha_poll(sc, xs, count)
struct bha_softc *sc;
struct scsipi_xfer *xs;
int count;
{
bus_space_tag_t iot = sc->sc_iot;
bus_space_handle_t ioh = sc->sc_ioh;
/* timeouts are in msec, so we loop in 1000 usec cycles */
while (count) {
/*
* If we had interrupts enabled, would we
* have got an interrupt?
*/
if (bus_space_read_1(iot, ioh, BHA_INTR_PORT) &
BHA_INTR_ANYINTR)
bha_intr(sc);
if (xs->xs_status & XS_STS_DONE)
return (0);
delay(1000); /* only happens in boot so ok */
count--;
}
return (1);
}
/*
* bha_timeout:
*
* CCB timeout handler.
*/
void
bha_timeout(arg)
void *arg;
{
struct bha_ccb *ccb = arg;
struct scsipi_xfer *xs = ccb->xs;
struct scsipi_periph *periph = xs->xs_periph;
struct bha_softc *sc =
(void *)periph->periph_channel->chan_adapter->adapt_dev;
int s;
scsipi_printaddr(periph);
printf("timed out");
s = splbio();
#ifdef BHADIAG
/*
* If the ccb's mbx is not free, then the board has gone Far East?
*/
bha_collect_mbo(sc);
if (ccb->flags & CCB_SENDING) {
printf("%s: not taking commands!\n", sc->sc_dev.dv_xname);
Debugger();
}
#endif
/*
* If it has been through before, then
* a previous abort has failed, don't
* try abort again
*/
if (ccb->flags & CCB_ABORT) {
/* abort timed out */
printf(" AGAIN\n");
/* XXX Must reset! */
} else {
/* abort the operation that has timed out */
printf("\n");
ccb->xs->error = XS_TIMEOUT;
ccb->timeout = BHA_ABORT_TIMEOUT;
ccb->flags |= CCB_ABORT;
bha_queue_ccb(sc, ccb);
}
splx(s);
}
/*****************************************************************************
* Misc. subroutines.
*****************************************************************************/
/*
* bha_cmd:
*
* Send a command to the Buglogic controller.
*/
int
bha_cmd(iot, ioh, name, icnt, ibuf, ocnt, obuf)
bus_space_tag_t iot;
bus_space_handle_t ioh;
char *name;
int icnt, ocnt;
u_char *ibuf, *obuf;
{
int i;
int wait;
u_char sts;
u_char opcode = ibuf[0];
/*
* Calculate a reasonable timeout for the command.
*/
switch (opcode) {
case BHA_INQUIRE_DEVICES:
case BHA_INQUIRE_DEVICES_2:
wait = 90 * 20000;
break;
default:
wait = 1 * 20000;
break;
}
/*
* Wait for the adapter to go idle, unless it's one of
* the commands which don't need this
*/
if (opcode != BHA_MBO_INTR_EN) {
for (i = 20000; i; i--) { /* 1 sec? */
sts = bus_space_read_1(iot, ioh, BHA_STAT_PORT);
if (sts & BHA_STAT_IDLE)
break;
delay(50);
}
if (!i) {
printf("%s: bha_cmd, host not idle(0x%x)\n",
name, sts);
return (1);
}
}
/*
* Now that it is idle, if we expect output, preflush the
* queue feeding to us.
*/
if (ocnt) {
while ((bus_space_read_1(iot, ioh, BHA_STAT_PORT)) &
BHA_STAT_DF)
bus_space_read_1(iot, ioh, BHA_DATA_PORT);
}
/*
* Output the command and the number of arguments given
* for each byte, first check the port is empty.
*/
while (icnt--) {
for (i = wait; i; i--) {
sts = bus_space_read_1(iot, ioh, BHA_STAT_PORT);
if (!(sts & BHA_STAT_CDF))
break;
delay(50);
}
if (!i) {
if (opcode != BHA_INQUIRE_REVISION)
printf("%s: bha_cmd, cmd/data port full\n",
name);
goto bad;
}
bus_space_write_1(iot, ioh, BHA_CMD_PORT, *ibuf++);
}
/*
* If we expect input, loop that many times, each time,
* looking for the data register to have valid data
*/
while (ocnt--) {
for (i = wait; i; i--) {
sts = bus_space_read_1(iot, ioh, BHA_STAT_PORT);
if (sts & BHA_STAT_DF)
break;
delay(50);
}
if (!i) {
#ifdef BHADEBUG
if (opcode != BHA_INQUIRE_REVISION)
printf("%s: bha_cmd, cmd/data port empty %d\n",
name, ocnt);
#endif /* BHADEBUG */
goto bad;
}
*obuf++ = bus_space_read_1(iot, ioh, BHA_DATA_PORT);
}
/*
* Wait for the board to report a finished instruction.
* We may get an extra interrupt for the HACC signal, but this is
* unimportant.
*/
if (opcode != BHA_MBO_INTR_EN && opcode != BHA_MODIFY_IOPORT) {
for (i = 20000; i; i--) { /* 1 sec? */
sts = bus_space_read_1(iot, ioh, BHA_INTR_PORT);
/* XXX Need to save this in the interrupt handler? */
if (sts & BHA_INTR_HACC)
break;
delay(50);
}
if (!i) {
printf("%s: bha_cmd, host not finished(0x%x)\n",
name, sts);
return (1);
}
}
bus_space_write_1(iot, ioh, BHA_CTRL_PORT, BHA_CTRL_IRST);
return (0);
bad:
bus_space_write_1(iot, ioh, BHA_CTRL_PORT, BHA_CTRL_SRST);
return (1);
}
/*
* bha_find:
*
* Find the board.
*/
int
bha_find(iot, ioh)
bus_space_tag_t iot;
bus_space_handle_t ioh;
{
int i;
u_char sts;
struct bha_extended_inquire inquire;
/* Check something is at the ports we need to access */
sts = bus_space_read_1(iot, ioh, BHA_STAT_PORT);
if (sts == 0xFF)
return (0);
/*
* Reset board, If it doesn't respond, assume
* that it's not there.. good for the probe
*/
bus_space_write_1(iot, ioh, BHA_CTRL_PORT,
BHA_CTRL_HRST | BHA_CTRL_SRST);
delay(100);
for (i = BHA_RESET_TIMEOUT; i; i--) {
sts = bus_space_read_1(iot, ioh, BHA_STAT_PORT);
if (sts == (BHA_STAT_IDLE | BHA_STAT_INIT))
break;
delay(1000);
}
if (!i) {
#ifdef BHADEBUG
if (bha_debug)
printf("bha_find: No answer from buslogic board\n");
#endif /* BHADEBUG */
return (0);
}
/*
* The BusLogic cards implement an Adaptec 1542 (aha)-compatible
* interface. The native bha interface is not compatible with
* an aha. 1542. We need to ensure that we never match an
* Adaptec 1542. We must also avoid sending Adaptec-compatible
* commands to a real bha, lest it go into 1542 emulation mode.
* (On an indirect bus like ISA, we should always probe for BusLogic
* interfaces before Adaptec interfaces).
*/
/*
* Make sure we don't match an AHA-1542A or AHA-1542B, by checking
* for an extended-geometry register. The 1542[AB] don't have one.
*/
sts = bus_space_read_1(iot, ioh, BHA_EXTGEOM_PORT);
if (sts == 0xFF)
return (0);
/*
* Check that we actually know how to use this board.
*/
delay(1000);
inquire.cmd.opcode = BHA_INQUIRE_EXTENDED;
inquire.cmd.len = sizeof(inquire.reply);
i = bha_cmd(iot, ioh, "(bha_find)",
sizeof(inquire.cmd), (u_char *)&inquire.cmd,
sizeof(inquire.reply), (u_char *)&inquire.reply);
/*
* Some 1542Cs (CP, perhaps not CF, may depend on firmware rev)
* have the extended-geometry register and also respond to
* BHA_INQUIRE_EXTENDED. Make sure we never match such cards,
* by checking the size of the reply is what a BusLogic card returns.
*/
if (i) {
#ifdef BHADEBUG
printf("bha_find: board returned %d instead of %d to %s\n",
i, sizeof(inquire.reply), "INQUIRE_EXTENDED");
#endif
return (0);
}
/* OK, we know we've found a buslogic adaptor. */
switch (inquire.reply.bus_type) {
case BHA_BUS_TYPE_24BIT:
case BHA_BUS_TYPE_32BIT:
break;
case BHA_BUS_TYPE_MCA:
/* We don't grok MicroChannel (yet). */
return (0);
default:
printf("bha_find: illegal bus type %c\n",
inquire.reply.bus_type);
return (0);
}
return (1);
}
/*
* bha_inquire_config:
*
* Determine irq/drq.
*/
int
bha_inquire_config(bus_space_tag_t iot, bus_space_handle_t ioh,
struct bha_probe_data *sc)
{
int irq, drq;
struct bha_config config;
/*
* Assume we have a board at this stage setup dma channel from
* jumpers and save int level
*/
delay(1000);
config.cmd.opcode = BHA_INQUIRE_CONFIG;
bha_cmd(iot, ioh, "(bha_inquire_config)",
sizeof(config.cmd), (u_char *)&config.cmd,
sizeof(config.reply), (u_char *)&config.reply);
switch (config.reply.chan) {
case EISADMA:
drq = -1;
break;
case CHAN0:
drq = 0;
break;
case CHAN5:
drq = 5;
break;
case CHAN6:
drq = 6;
break;
case CHAN7:
drq = 7;
break;
default:
printf("bha: illegal drq setting %x\n",
config.reply.chan);
return (0);
}
switch (config.reply.intr) {
case INT9:
irq = 9;
break;
case INT10:
irq = 10;
break;
case INT11:
irq = 11;
break;
case INT12:
irq = 12;
break;
case INT14:
irq = 14;
break;
case INT15:
irq = 15;
break;
default:
printf("bha: illegal irq setting %x\n",
config.reply.intr);
return (0);
}
/* if we want to fill in softc, do so now */
if (sc != NULL) {
sc->sc_irq = irq;
sc->sc_drq = drq;
}
return (1);
}
int
bha_probe_inquiry(bus_space_tag_t iot, bus_space_handle_t ioh,
struct bha_probe_data *bpd)
{
return bha_find(iot, ioh) && bha_inquire_config(iot, ioh, bpd);
}
/*
* bha_disable_isacompat:
*
* Disable the ISA-compatiblity ioports on PCI bha devices,
* to ensure they're not autoconfigured a second time as an ISA bha.
*/
int
bha_disable_isacompat(sc)
struct bha_softc *sc;
{
struct bha_isadisable isa_disable;
isa_disable.cmd.opcode = BHA_MODIFY_IOPORT;
isa_disable.cmd.modifier = BHA_IOMODIFY_DISABLE1;
bha_cmd(sc->sc_iot, sc->sc_ioh, sc->sc_dev.dv_xname,
sizeof(isa_disable.cmd), (u_char*)&isa_disable.cmd,
0, (u_char *)0);
return (0);
}
/*
* bha_info:
*
* Get information about the board, and report it. We
* return the initial number of CCBs, 0 if we failed.
*/
int
bha_info(sc)
struct bha_softc *sc;
{
bus_space_tag_t iot = sc->sc_iot;
bus_space_handle_t ioh = sc->sc_ioh;
struct bha_extended_inquire inquire;
struct bha_config config;
struct bha_devices devices;
struct bha_setup setup;
struct bha_model model;
struct bha_revision revision;
struct bha_digit digit;
int i, j, initial_ccbs, rlen;
char *name = sc->sc_dev.dv_xname;
char *p;
/*
* Fetch the extended inquire information.
*/
inquire.cmd.opcode = BHA_INQUIRE_EXTENDED;
inquire.cmd.len = sizeof(inquire.reply);
bha_cmd(iot, ioh, name,
sizeof(inquire.cmd), (u_char *)&inquire.cmd,
sizeof(inquire.reply), (u_char *)&inquire.reply);
/*
* Fetch the configuration information.
*/
config.cmd.opcode = BHA_INQUIRE_CONFIG;
bha_cmd(iot, ioh, name,
sizeof(config.cmd), (u_char *)&config.cmd,
sizeof(config.reply), (u_char *)&config.reply);
sc->sc_scsi_id = config.reply.scsi_dev;
/*
* Get the firmware revision.
*/
p = sc->sc_firmware;
revision.cmd.opcode = BHA_INQUIRE_REVISION;
bha_cmd(iot, ioh, name,
sizeof(revision.cmd), (u_char *)&revision.cmd,
sizeof(revision.reply), (u_char *)&revision.reply);
*p++ = revision.reply.firm_revision;
*p++ = '.';
*p++ = revision.reply.firm_version;
digit.cmd.opcode = BHA_INQUIRE_REVISION_3;
bha_cmd(iot, ioh, name,
sizeof(digit.cmd), (u_char *)&digit.cmd,
sizeof(digit.reply), (u_char *)&digit.reply);
*p++ = digit.reply.digit;
if (revision.reply.firm_revision >= '3' ||
(revision.reply.firm_revision == '3' &&
revision.reply.firm_version >= '3')) {
digit.cmd.opcode = BHA_INQUIRE_REVISION_4;
bha_cmd(iot, ioh, name,
sizeof(digit.cmd), (u_char *)&digit.cmd,
sizeof(digit.reply), (u_char *)&digit.reply);
*p++ = digit.reply.digit;
}
while (p > sc->sc_firmware && (p[-1] == ' ' || p[-1] == '\0'))
p--;
*p = '\0';
/*
* Get the model number.
*
* Some boards do not handle the Inquire Board Model Number
* command correctly, or don't give correct information.
*
* So, we use the Firmware Revision and Extended Setup
* information to fixup the model number in these cases.
*
* The firmware version indicates:
*
* 5.xx BusLogic "W" Series Host Adapters
* BT-948/958/958D
*
* 4.xx BusLogic "C" Series Host Adapters
* BT-946C/956C/956CD/747C/757C/757CD/445C/545C/540CF
*
* 3.xx BusLogic "S" Series Host Adapters
* BT-747S/747D/757S/757D/445S/545S/542D
* BT-542B/742A (revision H)
*
* 2.xx BusLogic "A" Series Host Adapters
* BT-542B/742A (revision G and below)
*
* 0.xx AMI FastDisk VLB/EISA BusLogic Clone Host Adapter
*/
if (inquire.reply.bus_type == BHA_BUS_TYPE_24BIT &&
sc->sc_firmware[0] < '3')
sprintf(sc->sc_model, "542B");
else if (inquire.reply.bus_type == BHA_BUS_TYPE_32BIT &&
sc->sc_firmware[0] == '2' &&
(sc->sc_firmware[2] == '1' ||
(sc->sc_firmware[2] == '2' && sc->sc_firmware[3] == '0')))
sprintf(sc->sc_model, "742A");
else if (inquire.reply.bus_type == BHA_BUS_TYPE_32BIT &&
sc->sc_firmware[0] == '0')
sprintf(sc->sc_model, "747A");
else {
p = sc->sc_model;
model.cmd.opcode = BHA_INQUIRE_MODEL;
model.cmd.len = sizeof(model.reply);
bha_cmd(iot, ioh, name,
sizeof(model.cmd), (u_char *)&model.cmd,
sizeof(model.reply), (u_char *)&model.reply);
*p++ = model.reply.id[0];
*p++ = model.reply.id[1];
*p++ = model.reply.id[2];
*p++ = model.reply.id[3];
while (p > sc->sc_model && (p[-1] == ' ' || p[-1] == '\0'))
p--;
*p++ = model.reply.version[0];
*p++ = model.reply.version[1];
while (p > sc->sc_model && (p[-1] == ' ' || p[-1] == '\0'))
p--;
*p = '\0';
}
/* Enable round-robin scheme - appeared at firmware rev. 3.31. */
if (strcmp(sc->sc_firmware, "3.31") >= 0)
sc->sc_flags |= BHAF_STRICT_ROUND_ROBIN;
/*
* Determine some characteristics about our bus.
*/
if (inquire.reply.scsi_flags & BHA_SCSI_WIDE)
sc->sc_flags |= BHAF_WIDE;
if (inquire.reply.scsi_flags & BHA_SCSI_DIFFERENTIAL)
sc->sc_flags |= BHAF_DIFFERENTIAL;
if (inquire.reply.scsi_flags & BHA_SCSI_ULTRA)
sc->sc_flags |= BHAF_ULTRA;
/*
* Determine some characterists of the board.
*/
sc->sc_max_dmaseg = inquire.reply.sg_limit;
/*
* Determine the maximum CCB count and whether or not
* tagged queueing is available on this host adapter.
*
* Tagged queueing works on:
*
* "W" Series adapters
* "C" Series adapters with firmware >= 4.22
* "S" Series adapters with firmware >= 3.35
*
* The internal CCB counts are:
*
* 192 BT-948/958/958D
* 100 BT-946C/956C/956CD/747C/757C/757CD/445C
* 50 BT-545C/540CF
* 30 BT-747S/747D/757S/757D/445S/545S/542D/542B/742A
*/
switch (sc->sc_firmware[0]) {
case '5':
sc->sc_max_ccbs = 192;
sc->sc_flags |= BHAF_TAGGED_QUEUEING;
break;
case '4':
if (sc->sc_model[0] == '5')
sc->sc_max_ccbs = 50;
else
sc->sc_max_ccbs = 100;
if (strcmp(sc->sc_firmware, "4.22") >= 0)
sc->sc_flags |= BHAF_TAGGED_QUEUEING;
break;
case '3':
if (strcmp(sc->sc_firmware, "3.35") >= 0)
sc->sc_flags |= BHAF_TAGGED_QUEUEING;
/* FALLTHROUGH */
default:
sc->sc_max_ccbs = 30;
}
/*
* Set the mailbox count to precisely the number of HW CCBs
* available. A mailbox isn't required while a CCB is executing,
* but this allows us to actually enqueue up to our resource
* limit.
*
* This will keep the mailbox count small on boards which don't
* have strict round-robin (they have to scan the entire set of
* mailboxes each time they run a command).
*/
sc->sc_mbox_count = sc->sc_max_ccbs;
/*
* Obtain setup information.
*/
rlen = sizeof(setup.reply) +
((sc->sc_flags & BHAF_WIDE) ? sizeof(setup.reply_w) : 0);
setup.cmd.opcode = BHA_INQUIRE_SETUP;
setup.cmd.len = rlen;
bha_cmd(iot, ioh, name,
sizeof(setup.cmd), (u_char *)&setup.cmd,
rlen, (u_char *)&setup.reply);
printf("%s: model BT-%s, firmware %s\n", sc->sc_dev.dv_xname,
sc->sc_model, sc->sc_firmware);
printf("%s: %d H/W CCBs", sc->sc_dev.dv_xname, sc->sc_max_ccbs);
if (setup.reply.sync_neg)
printf(", sync");
if (setup.reply.parity)
printf(", parity");
if (sc->sc_flags & BHAF_TAGGED_QUEUEING)
printf(", tagged queueing");
if (sc->sc_flags & BHAF_WIDE_LUN)
printf(", wide LUN support");
printf("\n");
/*
* Poll targets 0 - 7.
*/
devices.cmd.opcode = BHA_INQUIRE_DEVICES;
bha_cmd(iot, ioh, name,
sizeof(devices.cmd), (u_char *)&devices.cmd,
sizeof(devices.reply), (u_char *)&devices.reply);
/* Count installed units. */
initial_ccbs = 0;
for (i = 0; i < 8; i++) {
for (j = 0; j < 8; j++) {
if (((devices.reply.lun_map[i] >> j) & 1) == 1)
initial_ccbs++;
}
}
/*
* Poll targets 8 - 15 if we have a wide bus.
*/
if (sc->sc_flags & BHAF_WIDE) {
devices.cmd.opcode = BHA_INQUIRE_DEVICES_2;
bha_cmd(iot, ioh, name,
sizeof(devices.cmd), (u_char *)&devices.cmd,
sizeof(devices.reply), (u_char *)&devices.reply);
for (i = 0; i < 8; i++) {
for (j = 0; j < 8; j++) {
if (((devices.reply.lun_map[i] >> j) & 1) == 1)
initial_ccbs++;
}
}
}
/*
* Double the initial CCB count, for good measure.
*/
initial_ccbs *= 2;
/*
* Sanity check the initial CCB count; don't create more than
* we can enqueue (sc_max_ccbs), and make sure there are some
* at all.
*/
if (initial_ccbs > sc->sc_max_ccbs)
initial_ccbs = sc->sc_max_ccbs;
if (initial_ccbs == 0)
initial_ccbs = 2;
return (initial_ccbs);
}
/*
* bha_init:
*
* Initialize the board.
*/
int
bha_init(sc)
struct bha_softc *sc;
{
char *name = sc->sc_dev.dv_xname;
struct bha_toggle toggle;
struct bha_mailbox mailbox;
struct bha_mbx_out *mbo;
struct bha_mbx_in *mbi;
int i;
/*
* Set up the mailbox. We always run the mailbox in round-robin.
*/
for (i = 0; i < sc->sc_mbox_count; i++) {
mbo = &sc->sc_mbo[i];
mbi = &sc->sc_mbi[i];
mbo->cmd = BHA_MBO_FREE;
BHA_MBO_SYNC(sc, mbo, BUS_DMASYNC_PREREAD|BUS_DMASYNC_PREWRITE);
mbi->comp_stat = BHA_MBI_FREE;
BHA_MBI_SYNC(sc, mbi, BUS_DMASYNC_PREREAD|BUS_DMASYNC_PREWRITE);
}
sc->sc_cmbo = sc->sc_tmbo = &sc->sc_mbo[0];
sc->sc_tmbi = &sc->sc_mbi[0];
sc->sc_mbofull = 0;
/*
* If the board supports strict round-robin, enable that.
*/
if (sc->sc_flags & BHAF_STRICT_ROUND_ROBIN) {
toggle.cmd.opcode = BHA_ROUND_ROBIN;
toggle.cmd.enable = 1;
bha_cmd(sc->sc_iot, sc->sc_ioh, name,
sizeof(toggle.cmd), (u_char *)&toggle.cmd,
0, NULL);
}
/*
* Give the mailbox to the board.
*/
mailbox.cmd.opcode = BHA_MBX_INIT_EXTENDED;
mailbox.cmd.nmbx = sc->sc_mbox_count;
ltophys(sc->sc_dmamap_mbox->dm_segs[0].ds_addr, mailbox.cmd.addr);
bha_cmd(sc->sc_iot, sc->sc_ioh, name,
sizeof(mailbox.cmd), (u_char *)&mailbox.cmd,
0, (u_char *)0);
return (0);
}
/*****************************************************************************
* CCB execution engine
*****************************************************************************/
/*
* bha_queue_ccb:
*
* Queue a CCB to be sent to the controller, and send it if possible.
*/
void
bha_queue_ccb(sc, ccb)
struct bha_softc *sc;
struct bha_ccb *ccb;
{
TAILQ_INSERT_TAIL(&sc->sc_waiting_ccb, ccb, chain);
bha_start_ccbs(sc);
}
/*
* bha_start_ccbs:
*
* Send as many CCBs as we have empty mailboxes for.
*/
void
bha_start_ccbs(sc)
struct bha_softc *sc;
{
bus_space_tag_t iot = sc->sc_iot;
bus_space_handle_t ioh = sc->sc_ioh;
struct bha_ccb_group *bcg;
struct bha_mbx_out *mbo;
struct bha_ccb *ccb;
mbo = sc->sc_tmbo;
while ((ccb = TAILQ_FIRST(&sc->sc_waiting_ccb)) != NULL) {
if (sc->sc_mbofull >= sc->sc_mbox_count) {
#ifdef DIAGNOSTIC
if (sc->sc_mbofull > sc->sc_mbox_count)
panic("bha_start_ccbs: mbofull > mbox_count");
#endif
/*
* No mailboxes available; attempt to collect ones
* that have already been used.
*/
bha_collect_mbo(sc);
if (sc->sc_mbofull == sc->sc_mbox_count) {
/*
* Still no more available; have the
* controller interrupt us when it
* frees one.
*/
struct bha_toggle toggle;
toggle.cmd.opcode = BHA_MBO_INTR_EN;
toggle.cmd.enable = 1;
bha_cmd(iot, ioh, sc->sc_dev.dv_xname,
sizeof(toggle.cmd), (u_char *)&toggle.cmd,
0, (u_char *)0);
break;
}
}
TAILQ_REMOVE(&sc->sc_waiting_ccb, ccb, chain);
#ifdef BHADIAG
ccb->flags |= CCB_SENDING;
#endif
/*
* Put the CCB in the mailbox.
*/
bcg = BHA_CCB_GROUP(ccb);
ltophys(bcg->bcg_dmamap->dm_segs[0].ds_addr +
BHA_CCB_OFFSET(ccb), mbo->ccb_addr);
if (ccb->flags & CCB_ABORT)
mbo->cmd = BHA_MBO_ABORT;
else
mbo->cmd = BHA_MBO_START;
BHA_MBO_SYNC(sc, mbo,
BUS_DMASYNC_PREREAD|BUS_DMASYNC_PREWRITE);
/* Tell the card to poll immediately. */
bus_space_write_1(iot, ioh, BHA_CMD_PORT, BHA_START_SCSI);
if ((ccb->xs->xs_control & XS_CTL_POLL) == 0)
callout_reset(&ccb->xs->xs_callout,
(ccb->timeout * hz) / 1000, bha_timeout, ccb);
++sc->sc_mbofull;
mbo = bha_nextmbo(sc, mbo);
}
sc->sc_tmbo = mbo;
}
/*
* bha_finish_ccbs:
*
* Finalize the execution of CCBs in our incoming mailbox.
*/
void
bha_finish_ccbs(sc)
struct bha_softc *sc;
{
struct bha_mbx_in *mbi;
struct bha_ccb *ccb;
int i;
mbi = sc->sc_tmbi;
BHA_MBI_SYNC(sc, mbi, BUS_DMASYNC_POSTREAD|BUS_DMASYNC_POSTWRITE);
if (mbi->comp_stat == BHA_MBI_FREE) {
for (i = 0; i < sc->sc_mbox_count; i++) {
if (mbi->comp_stat != BHA_MBI_FREE) {
#ifdef BHADIAG
/*
* This can happen in normal operation if
* we use all mailbox slots.
*/
printf("%s: mbi not in round-robin order\n",
sc->sc_dev.dv_xname);
#endif
goto again;
}
mbi = bha_nextmbi(sc, mbi);
BHA_MBI_SYNC(sc, mbi,
BUS_DMASYNC_POSTREAD|BUS_DMASYNC_POSTWRITE);
}
#ifdef BHADIAGnot
printf("%s: mbi interrupt with no full mailboxes\n",
sc->sc_dev.dv_xname);
#endif
return;
}
again:
do {
ccb = bha_ccb_phys_kv(sc, phystol(mbi->ccb_addr));
if (ccb == NULL) {
printf("%s: bad mbi ccb pointer 0x%08x; skipping\n",
sc->sc_dev.dv_xname, phystol(mbi->ccb_addr));
goto next;
}
BHA_CCB_SYNC(sc, ccb,
BUS_DMASYNC_POSTREAD|BUS_DMASYNC_POSTWRITE);
#ifdef BHADEBUG
if (bha_debug) {
struct scsi_generic *cmd = &ccb->scsi_cmd;
printf("op=%x %x %x %x %x %x\n",
cmd->opcode, cmd->bytes[0], cmd->bytes[1],
cmd->bytes[2], cmd->bytes[3], cmd->bytes[4]);
printf("comp_stat %x for mbi addr = 0x%p, ",
mbi->comp_stat, mbi);
printf("ccb addr = %p\n", ccb);
}
#endif /* BHADEBUG */
switch (mbi->comp_stat) {
case BHA_MBI_OK:
case BHA_MBI_ERROR:
if ((ccb->flags & CCB_ABORT) != 0) {
/*
* If we already started an abort, wait for it
* to complete before clearing the CCB. We
* could instead just clear CCB_SENDING, but
* what if the mailbox was already received?
* The worst that happens here is that we clear
* the CCB a bit later than we need to. BFD.
*/
goto next;
}
break;
case BHA_MBI_ABORT:
case BHA_MBI_UNKNOWN:
/*
* Even if the CCB wasn't found, we clear it anyway.
* See preceding comment.
*/
break;
default:
printf("%s: bad mbi comp_stat %02x; skipping\n",
sc->sc_dev.dv_xname, mbi->comp_stat);
goto next;
}
callout_stop(&ccb->xs->xs_callout);
bha_done(sc, ccb);
next:
mbi->comp_stat = BHA_MBI_FREE;
BHA_CCB_SYNC(sc, ccb,
BUS_DMASYNC_PREREAD|BUS_DMASYNC_PREWRITE);
mbi = bha_nextmbi(sc, mbi);
BHA_MBI_SYNC(sc, mbi,
BUS_DMASYNC_POSTREAD|BUS_DMASYNC_POSTWRITE);
} while (mbi->comp_stat != BHA_MBI_FREE);
sc->sc_tmbi = mbi;
}
/*****************************************************************************
* Mailbox management functions.
*****************************************************************************/
/*
* bha_create_mailbox:
*
* Create the mailbox structures. Helper function for bha_attach().
*
* NOTE: The Buslogic hardware only gets one DMA address for the
* mailbox! It expects:
*
* mailbox_out[mailbox_size]
* mailbox_in[mailbox_size]
*/
int
bha_create_mailbox(sc)
struct bha_softc *sc;
{
bus_dma_segment_t seg;
size_t size;
int error, rseg;
size = (sizeof(struct bha_mbx_out) * sc->sc_mbox_count) +
(sizeof(struct bha_mbx_in) * sc->sc_mbox_count);
error = bus_dmamem_alloc(sc->sc_dmat, size, PAGE_SIZE, 0, &seg,
1, &rseg, sc->sc_dmaflags);
if (error) {
printf("%s: unable to allocate mailboxes, error = %d\n",
sc->sc_dev.dv_xname, error);
goto bad_0;
}
error = bus_dmamem_map(sc->sc_dmat, &seg, rseg, size,
(caddr_t *)&sc->sc_mbo, sc->sc_dmaflags | BUS_DMA_COHERENT);
if (error) {
printf("%s: unable to map mailboxes, error = %d\n",
sc->sc_dev.dv_xname, error);
goto bad_1;
}
memset(sc->sc_mbo, 0, size);
error = bus_dmamap_create(sc->sc_dmat, size, 1, size, 0,
sc->sc_dmaflags, &sc->sc_dmamap_mbox);
if (error) {
printf("%s: unable to create mailbox DMA map, error = %d\n",
sc->sc_dev.dv_xname, error);
goto bad_2;
}
error = bus_dmamap_load(sc->sc_dmat, sc->sc_dmamap_mbox,
sc->sc_mbo, size, NULL, 0);
if (error) {
printf("%s: unable to load mailbox DMA map, error = %d\n",
sc->sc_dev.dv_xname, error);
goto bad_3;
}
sc->sc_mbi = (struct bha_mbx_in *)(sc->sc_mbo + sc->sc_mbox_count);
return (0);
bad_3:
bus_dmamap_destroy(sc->sc_dmat, sc->sc_dmamap_mbox);
bad_2:
bus_dmamem_unmap(sc->sc_dmat, (caddr_t)sc->sc_mbo, size);
bad_1:
bus_dmamem_free(sc->sc_dmat, &seg, rseg);
bad_0:
return (error);
}
/*
* bha_collect_mbo:
*
* Garbage collect mailboxes that are no longer in use.
*/
void
bha_collect_mbo(sc)
struct bha_softc *sc;
{
struct bha_mbx_out *mbo;
#ifdef BHADIAG
struct bha_ccb *ccb;
#endif
mbo = sc->sc_cmbo;
while (sc->sc_mbofull > 0) {
BHA_MBO_SYNC(sc, mbo,
BUS_DMASYNC_POSTREAD|BUS_DMASYNC_POSTWRITE);
if (mbo->cmd != BHA_MBO_FREE)
break;
#ifdef BHADIAG
ccb = bha_ccb_phys_kv(sc, phystol(mbo->ccb_addr));
ccb->flags &= ~CCB_SENDING;
#endif
--sc->sc_mbofull;
mbo = bha_nextmbo(sc, mbo);
}
sc->sc_cmbo = mbo;
}
/*****************************************************************************
* CCB management functions
*****************************************************************************/
__inline void bha_reset_ccb __P((struct bha_ccb *));
__inline void
bha_reset_ccb(ccb)
struct bha_ccb *ccb;
{
ccb->flags = 0;
}
/*
* bha_create_ccbs:
*
* Create a set of CCBs.
*
* We determine the target CCB count, and then keep creating them
* until we reach the target, or fail. CCBs that are allocated
* but not "created" are left on the allocating list.
*/
void
bha_create_ccbs(sc, count)
struct bha_softc *sc;
int count;
{
struct bha_ccb_group *bcg;
struct bha_ccb *ccb;
bus_dma_segment_t seg;
bus_dmamap_t ccbmap;
int target, i, error, rseg;
/*
* If the current CCB count is already the max number we're
* allowed to have, bail out now.
*/
if (sc->sc_cur_ccbs == sc->sc_max_ccbs)
return;
/*
* Compute our target count, and clamp it down to the max
* number we're allowed to have.
*/
target = sc->sc_cur_ccbs + count;
if (target > sc->sc_max_ccbs)
target = sc->sc_max_ccbs;
/*
* If there are CCBs on the allocating list, don't allocate a
* CCB group yet.
*/
if (TAILQ_FIRST(&sc->sc_allocating_ccbs) != NULL)
goto have_allocating_ccbs;
allocate_group:
error = bus_dmamem_alloc(sc->sc_dmat, PAGE_SIZE,
PAGE_SIZE, 0, &seg, 1, &rseg, sc->sc_dmaflags | BUS_DMA_NOWAIT);
if (error) {
printf("%s: unable to allocate CCB group, error = %d\n",
sc->sc_dev.dv_xname, error);
goto bad_0;
}
error = bus_dmamem_map(sc->sc_dmat, &seg, rseg, PAGE_SIZE,
(caddr_t *)&bcg,
sc->sc_dmaflags | BUS_DMA_NOWAIT | BUS_DMA_COHERENT);
if (error) {
printf("%s: unable to map CCB group, error = %d\n",
sc->sc_dev.dv_xname, error);
goto bad_1;
}
memset(bcg, 0, PAGE_SIZE);
error = bus_dmamap_create(sc->sc_dmat, PAGE_SIZE,
1, PAGE_SIZE, 0, sc->sc_dmaflags | BUS_DMA_NOWAIT, &ccbmap);
if (error) {
printf("%s: unable to create CCB group DMA map, error = %d\n",
sc->sc_dev.dv_xname, error);
goto bad_2;
}
error = bus_dmamap_load(sc->sc_dmat, ccbmap, bcg, PAGE_SIZE, NULL,
sc->sc_dmaflags | BUS_DMA_NOWAIT);
if (error) {
printf("%s: unable to load CCB group DMA map, error = %d\n",
sc->sc_dev.dv_xname, error);
goto bad_3;
}
bcg->bcg_dmamap = ccbmap;
#ifdef DIAGNOSTIC
if (BHA_CCB_GROUP(&bcg->bcg_ccbs[0]) !=
BHA_CCB_GROUP(&bcg->bcg_ccbs[bha_ccbs_per_group - 1]))
panic("bha_create_ccbs: CCB group size botch");
#endif
/*
* Add all of the CCBs in this group to the allocating list.
*/
for (i = 0; i < bha_ccbs_per_group; i++) {
ccb = &bcg->bcg_ccbs[i];
TAILQ_INSERT_TAIL(&sc->sc_allocating_ccbs, ccb, chain);
}
have_allocating_ccbs:
/*
* Loop over the allocating list until we reach our CCB target.
* If we run out on the list, we'll allocate another group's
* worth.
*/
while (sc->sc_cur_ccbs < target) {
ccb = TAILQ_FIRST(&sc->sc_allocating_ccbs);
if (ccb == NULL)
goto allocate_group;
if (bha_init_ccb(sc, ccb) != 0) {
/*
* We were unable to initialize the CCB.
* This is likely due to a resource shortage,
* so bail out now.
*/
return;
}
}
/*
* If we got here, we've reached our target!
*/
return;
bad_3:
bus_dmamap_destroy(sc->sc_dmat, ccbmap);
bad_2:
bus_dmamem_unmap(sc->sc_dmat, (caddr_t)bcg, PAGE_SIZE);
bad_1:
bus_dmamem_free(sc->sc_dmat, &seg, rseg);
bad_0:
return;
}
/*
* bha_init_ccb:
*
* Initialize a CCB; helper function for bha_create_ccbs().
*/
int
bha_init_ccb(sc, ccb)
struct bha_softc *sc;
struct bha_ccb *ccb;
{
struct bha_ccb_group *bcg = BHA_CCB_GROUP(ccb);
int hashnum, error;
/*
* Create the DMA map for this CCB.
*
* XXX ALLOCNOW is a hack to prevent bounce buffer shortages
* XXX in the ISA case. A better solution is needed.
*/
error = bus_dmamap_create(sc->sc_dmat, BHA_MAXXFER, BHA_NSEG,
BHA_MAXXFER, 0, BUS_DMA_NOWAIT | BUS_DMA_ALLOCNOW | sc->sc_dmaflags,
&ccb->dmamap_xfer);
if (error) {
printf("%s: unable to create CCB DMA map, error = %d\n",
sc->sc_dev.dv_xname, error);
return (error);
}
TAILQ_REMOVE(&sc->sc_allocating_ccbs, ccb, chain);
/*
* Put the CCB into the phystokv hash table.
*/
ccb->hashkey = bcg->bcg_dmamap->dm_segs[0].ds_addr +
BHA_CCB_OFFSET(ccb);
hashnum = CCB_HASH(ccb->hashkey);
ccb->nexthash = sc->sc_ccbhash[hashnum];
sc->sc_ccbhash[hashnum] = ccb;
bha_reset_ccb(ccb);
TAILQ_INSERT_HEAD(&sc->sc_free_ccb, ccb, chain);
sc->sc_cur_ccbs++;
return (0);
}
/*
* bha_get_ccb:
*
* Get a CCB for the SCSI operation. If there are none left,
* wait until one becomes available, if we can.
*/
struct bha_ccb *
bha_get_ccb(sc)
struct bha_softc *sc;
{
struct bha_ccb *ccb;
int s;
s = splbio();
ccb = TAILQ_FIRST(&sc->sc_free_ccb);
if (ccb != NULL) {
TAILQ_REMOVE(&sc->sc_free_ccb, ccb, chain);
ccb->flags |= CCB_ALLOC;
}
splx(s);
return (ccb);
}
/*
* bha_free_ccb:
*
* Put a CCB back onto the free list.
*/
void
bha_free_ccb(sc, ccb)
struct bha_softc *sc;
struct bha_ccb *ccb;
{
int s;
s = splbio();
bha_reset_ccb(ccb);
TAILQ_INSERT_HEAD(&sc->sc_free_ccb, ccb, chain);
splx(s);
}
/*
* bha_ccb_phys_kv:
*
* Given a CCB DMA address, locate the CCB in kernel virtual space.
*/
struct bha_ccb *
bha_ccb_phys_kv(sc, ccb_phys)
struct bha_softc *sc;
bus_addr_t ccb_phys;
{
int hashnum = CCB_HASH(ccb_phys);
struct bha_ccb *ccb = sc->sc_ccbhash[hashnum];
while (ccb) {
if (ccb->hashkey == ccb_phys)
break;
ccb = ccb->nexthash;
}
return (ccb);
}