854 lines
21 KiB
C
854 lines
21 KiB
C
/* $NetBSD: atari5380.c,v 1.7 1996/02/14 08:09:47 leo Exp $ */
|
|
|
|
/*
|
|
* Copyright (c) 1995 Leo Weppelman.
|
|
* All rights reserved.
|
|
*
|
|
* Redistribution and use in source and binary forms, with or without
|
|
* modification, are permitted provided that the following conditions
|
|
* are met:
|
|
* 1. Redistributions of source code must retain the above copyright
|
|
* notice, this list of conditions and the following disclaimer.
|
|
* 2. Redistributions in binary form must reproduce the above copyright
|
|
* notice, this list of conditions and the following disclaimer in the
|
|
* documentation and/or other materials provided with the distribution.
|
|
* 3. All advertising materials mentioning features or use of this software
|
|
* must display the following acknowledgement:
|
|
* This product includes software developed by Leo Weppelman.
|
|
* 4. The name of the author may not be used to endorse or promote products
|
|
* derived from this software without specific prior written permission
|
|
*
|
|
* THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR
|
|
* IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES
|
|
* OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.
|
|
* IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
|
|
* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
|
|
* NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
|
|
* DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
|
|
* THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
|
|
* (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
|
|
* THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
|
|
*/
|
|
|
|
#include <sys/param.h>
|
|
#include <sys/systm.h>
|
|
#include <sys/kernel.h>
|
|
#include <sys/device.h>
|
|
#include <sys/buf.h>
|
|
#include <scsi/scsi_all.h>
|
|
#include <scsi/scsi_message.h>
|
|
#include <scsi/scsiconf.h>
|
|
|
|
/*
|
|
* Include the driver definitions
|
|
*/
|
|
#include <atari/dev/ncr5380reg.h>
|
|
|
|
#include <machine/stdarg.h>
|
|
#include <machine/iomap.h>
|
|
#include <machine/mfp.h>
|
|
|
|
#if defined(FALCON_SCSI)
|
|
#include <machine/dma.h>
|
|
#endif
|
|
|
|
/*
|
|
* This is crap, but because the interrupts now run at MFP spl-level (6),
|
|
* splbio() is not enough at some places. The code should be checked to
|
|
* find out where splhigh() is needed and where splbio() should be used.
|
|
* Now that I use this interrupt sceme, the spl values are fake!
|
|
*/
|
|
#undef splbio()
|
|
#define splbio() splhigh()
|
|
|
|
/*
|
|
* Set the various driver options
|
|
*/
|
|
#define NREQ 18 /* Size of issue queue */
|
|
#define AUTO_SENSE 1 /* Automatically issue a request-sense */
|
|
|
|
#define DRNAME ncrscsi /* used in various prints */
|
|
#undef DBG_SEL /* Show the selection process */
|
|
#undef DBG_REQ /* Show enqueued/ready requests */
|
|
#undef DBG_ERR_RET /* Show requests with != 0 return code */
|
|
#undef DBG_NOWRITE /* Do not allow writes to the targets */
|
|
#undef DBG_PIO /* Show the polled-I/O process */
|
|
#undef DBG_INF /* Show information transfer process */
|
|
#define DBG_NOSTATIC /* No static functions, all in DDB trace*/
|
|
#define DBG_PID 25 /* Keep track of driver */
|
|
#define REAL_DMA /* Use DMA if sensible */
|
|
#if defined(FALCON_SCSI)
|
|
#define REAL_DMA_POLL 1 /* 1: Poll for end of DMA-transfer */
|
|
#else
|
|
#define REAL_DMA_POLL 0 /* 1: Poll for end of DMA-transfer */
|
|
#endif
|
|
#undef USE_PDMA /* Use special pdma-transfer function */
|
|
#define MIN_PHYS 65536 /*BARF!!!!*/
|
|
|
|
/*
|
|
* The atari specific driver options
|
|
*/
|
|
#undef NO_TTRAM_DMA /* Do not use DMA to TT-ram. This */
|
|
/* fails on older atari's */
|
|
#define ENABLE_NCR5380(sc) cur_softc = sc;
|
|
|
|
/*
|
|
* Functions that do nothing on the atari
|
|
*/
|
|
#define pdma_ready() 0
|
|
|
|
#if defined(TT_SCSI)
|
|
/*
|
|
* Define all the things we need of the DMA-controller
|
|
*/
|
|
#define SCSI_DMA ((struct scsi_dma *)AD_SCSI_DMA)
|
|
#define SCSI_5380 ((struct scsi_5380 *)AD_NCR5380)
|
|
|
|
struct scsi_dma {
|
|
volatile u_char s_dma_ptr[8]; /* use only the odd bytes */
|
|
volatile u_char s_dma_cnt[8]; /* use only the odd bytes */
|
|
volatile u_char s_dma_res[4]; /* data residue register */
|
|
volatile u_char s_dma_gap; /* not used */
|
|
volatile u_char s_dma_ctrl; /* control register */
|
|
};
|
|
|
|
#define set_scsi_dma(addr, val) (void)( \
|
|
{ \
|
|
u_char *address = (u_char*)addr+1; \
|
|
u_long nval = (u_long)val; \
|
|
__asm("movepl %0, %1@(0)": :"d" (nval), "a" (address)); \
|
|
})
|
|
|
|
#define get_scsi_dma(addr, res) ( \
|
|
{ \
|
|
u_char *address = (u_char*)addr+1; \
|
|
u_long nval; \
|
|
__asm("movepl %1@(0), %0": "=d" (nval) : "a" (address)); \
|
|
res = (u_long)nval; \
|
|
})
|
|
|
|
/*
|
|
* Defines for TT-DMA control register
|
|
*/
|
|
#define SD_BUSERR 0x80 /* 1 = transfer caused bus error*/
|
|
#define SD_ZERO 0x40 /* 1 = byte counter is zero */
|
|
#define SD_ENABLE 0x02 /* 1 = Enable DMA */
|
|
#define SD_OUT 0x01 /* Direction: memory to SCSI */
|
|
#define SD_IN 0x00 /* Direction: SCSI to memory */
|
|
|
|
/*
|
|
* Define the 5380 register set
|
|
*/
|
|
struct scsi_5380 {
|
|
volatile u_char scsi_5380[16]; /* use only the odd bytes */
|
|
};
|
|
#endif /* TT_SCSI */
|
|
|
|
/**********************************************
|
|
* Variables present for both TT and Falcon. *
|
|
**********************************************/
|
|
|
|
/*
|
|
* Softc of currently active controller (a bit of fake; we only have one)
|
|
*/
|
|
static struct ncr_softc *cur_softc;
|
|
|
|
#if defined(TT_SCSI) && !defined(FALCON_SCSI)
|
|
/*
|
|
* We can be more efficient for some functions when only TT_SCSI is selected
|
|
*/
|
|
#define GET_5380_REG(rnum) SCSI_5380->scsi_5380[(rnum << 1) | 1]
|
|
#define SET_5380_REG(rnum,val) (SCSI_5380->scsi_5380[(rnum << 1) | 1] = val)
|
|
|
|
#define scsi_mach_init(sc) scsi_tt_init(sc)
|
|
#define scsi_ienable() scsi_tt_ienable()
|
|
#define scsi_idisable() scsi_tt_idisable()
|
|
#define scsi_clr_ipend() scsi_tt_clr_ipend()
|
|
#define scsi_ipending() (GET_5380_REG(NCR5380_DMSTAT) & SC_IRQ_SET)
|
|
#define scsi_dma_setup(r,p,m) scsi_tt_dmasetup(r, p, m)
|
|
#define wrong_dma_range(r,d) tt_wrong_dma_range(r, d)
|
|
#define poll_edma(reqp) tt_poll_edma(reqp)
|
|
#define get_dma_result(r, b) tt_get_dma_result(r, b)
|
|
|
|
#define fair_to_keep_dma() 1
|
|
#define claimed_dma() 1
|
|
#define reconsider_dma()
|
|
|
|
#endif /* defined(TT_SCSI) && !defined(FALCON_SCSI) */
|
|
|
|
#if defined(TT_SCSI)
|
|
|
|
/*
|
|
* Define these too, so we can use them locally...
|
|
*/
|
|
#define GET_TT_REG(rnum) SCSI_5380->scsi_5380[(rnum << 1) | 1]
|
|
#define SET_TT_REG(rnum,val) (SCSI_5380->scsi_5380[(rnum << 1) | 1] = val)
|
|
|
|
#ifdef NO_TTRAM_DMA
|
|
static int tt_wrong_dma_range(reqp, dm)
|
|
SC_REQ *reqp;
|
|
struct dma_chain *dm;
|
|
{
|
|
if (dm->dm_addr & 0xff000000) {
|
|
reqp->dr_flag |= DRIVER_BOUNCING;
|
|
return(1);
|
|
}
|
|
return(0);
|
|
}
|
|
#else
|
|
#define tt_wrong_dma_range(reqp, dm) 0
|
|
#endif
|
|
|
|
static void scsi_tt_init(sc)
|
|
struct ncr_softc *sc;
|
|
{
|
|
/*
|
|
* Enable SCSI-related interrupts
|
|
*/
|
|
MFP2->mf_aer |= 0x80; /* SCSI IRQ goes HIGH!!!!! */
|
|
|
|
MFP2->mf_ierb |= IB_SCDM; /* SCSI-dma interrupts */
|
|
MFP2->mf_iprb &= ~IB_SCDM;
|
|
MFP2->mf_imrb |= IB_SCDM;
|
|
|
|
MFP2->mf_iera |= IA_SCSI; /* SCSI-5380 interrupts */
|
|
MFP2->mf_ipra &= ~IA_SCSI;
|
|
MFP2->mf_imra |= IA_SCSI;
|
|
|
|
/*
|
|
* LWP: DMA transfers to TT-ram causes data to be garbeled
|
|
* without notice on some revisons of the TT-mainboard.
|
|
* When program's generate misterious Segmentations faults,
|
|
* try turning on NO_TTRAM_DMA.
|
|
*/
|
|
#ifdef NO_TTRAM_DMA
|
|
printf(": DMA to TT-RAM is disabled!");
|
|
#endif
|
|
}
|
|
|
|
static u_char get_tt_5380_reg(rnum)
|
|
u_short rnum;
|
|
{
|
|
return(SCSI_5380->scsi_5380[(rnum << 1) | 1]);
|
|
}
|
|
|
|
static void set_tt_5380_reg(rnum, val)
|
|
u_short rnum, val;
|
|
{
|
|
SCSI_5380->scsi_5380[(rnum << 1) | 1] = val;
|
|
}
|
|
|
|
extern __inline__ void scsi_tt_ienable()
|
|
{
|
|
int sps = splbio();
|
|
MFP2->mf_ierb |= IB_SCDM;
|
|
MFP2->mf_iera |= IA_SCSI;
|
|
splx(sps);
|
|
}
|
|
|
|
extern __inline__ scsi_tt_idisable()
|
|
{
|
|
int sps = splbio();
|
|
MFP2->mf_ierb &= ~IB_SCDM;
|
|
MFP2->mf_iera &= ~IA_SCSI;
|
|
splx(sps);
|
|
}
|
|
|
|
extern __inline__ scsi_tt_clr_ipend()
|
|
{
|
|
int tmp;
|
|
|
|
SCSI_DMA->s_dma_ctrl = 0;
|
|
tmp = GET_TT_REG(NCR5380_IRCV);
|
|
}
|
|
|
|
static void scsi_tt_dmasetup(reqp, phase, mode)
|
|
SC_REQ *reqp;
|
|
u_int phase;
|
|
u_char mode;
|
|
{
|
|
if (PH_IN(phase)) {
|
|
SCSI_DMA->s_dma_ctrl = SD_IN;
|
|
set_scsi_dma(&(SCSI_DMA->s_dma_ptr), reqp->dm_cur->dm_addr);
|
|
set_scsi_dma(&(SCSI_DMA->s_dma_cnt), reqp->dm_cur->dm_count);
|
|
SET_TT_REG(NCR5380_ICOM, 0);
|
|
SET_TT_REG(NCR5380_MODE, mode);
|
|
SCSI_DMA->s_dma_ctrl = SD_ENABLE;
|
|
SET_TT_REG(NCR5380_IRCV, 0);
|
|
}
|
|
else {
|
|
SCSI_DMA->s_dma_ctrl = SD_OUT;
|
|
set_scsi_dma(&(SCSI_DMA->s_dma_ptr), reqp->dm_cur->dm_addr);
|
|
set_scsi_dma(&(SCSI_DMA->s_dma_cnt), reqp->dm_cur->dm_count);
|
|
SET_TT_REG(NCR5380_MODE, mode);
|
|
SET_TT_REG(NCR5380_ICOM, SC_ADTB);
|
|
SET_TT_REG(NCR5380_DMSTAT, 0);
|
|
SCSI_DMA->s_dma_ctrl = SD_ENABLE|SD_OUT;
|
|
}
|
|
}
|
|
|
|
static int
|
|
tt_poll_edma(reqp)
|
|
SC_REQ *reqp;
|
|
{
|
|
u_char dmstat, dmastat;
|
|
int timeout = 9000; /* XXX */
|
|
|
|
/*
|
|
* We wait here until the DMA has finished. This can be
|
|
* achieved by checking the following conditions:
|
|
* - 5380:
|
|
* - End of DMA flag is set
|
|
* - We lost BSY (error!!)
|
|
* - A phase mismatch has occured (partial transfer)
|
|
* - DMA-controller:
|
|
* - A bus error occurred (Kernel error!!)
|
|
* - All bytes are transferred
|
|
* If one of the terminating conditions was met, we call
|
|
* 'dma_ready' to check errors and perform the bookkeeping.
|
|
*/
|
|
|
|
for (;;) {
|
|
delay(20);
|
|
if (--timeout <= 0) {
|
|
ncr_tprint(reqp, "timeout on polled transfer\n");
|
|
reqp->xs->error = XS_DRIVER_STUFFUP;
|
|
return(0);
|
|
}
|
|
dmstat = GET_TT_REG(NCR5380_DMSTAT);
|
|
dmastat = SCSI_DMA->s_dma_ctrl;
|
|
if (dmstat & (SC_END_DMA|SC_BSY_ERR|SC_IRQ_SET))
|
|
break;
|
|
if (!(dmstat & SC_PHS_MTCH))
|
|
break;
|
|
if (dmastat & (SD_BUSERR|SD_ZERO))
|
|
break;
|
|
}
|
|
return(1);
|
|
}
|
|
|
|
/*
|
|
* Convert physical DMA address to a virtual address.
|
|
*/
|
|
static u_char *
|
|
ptov(reqp, phaddr)
|
|
SC_REQ *reqp;
|
|
u_long *phaddr;
|
|
{
|
|
struct dma_chain *dm;
|
|
u_char *vaddr;
|
|
|
|
dm = reqp->dm_chain;
|
|
vaddr = reqp->xdata_ptr;
|
|
for(; dm < reqp->dm_cur; dm++)
|
|
vaddr += dm->dm_count;
|
|
vaddr += (u_long)phaddr - dm->dm_addr;
|
|
return(vaddr);
|
|
}
|
|
|
|
static int
|
|
tt_get_dma_result(reqp, bytes_left)
|
|
SC_REQ *reqp;
|
|
u_long *bytes_left;
|
|
{
|
|
int dmastat, dmstat;
|
|
u_char *byte_p;
|
|
u_long leftover;
|
|
|
|
dmastat = SCSI_DMA->s_dma_ctrl;
|
|
dmstat = GET_TT_REG(NCR5380_DMSTAT);
|
|
get_scsi_dma(SCSI_DMA->s_dma_cnt, leftover);
|
|
get_scsi_dma(SCSI_DMA->s_dma_ptr, (u_long)byte_p);
|
|
|
|
if (dmastat & SD_BUSERR) {
|
|
/*
|
|
* The DMA-controller seems to access 8 bytes beyond
|
|
* it's limits on output. Therefore check also the byte
|
|
* count. If it's zero, ignore the bus error.
|
|
*/
|
|
if (leftover != 0) {
|
|
ncr_tprint(reqp,
|
|
"SCSI-DMA buserror - accessing 0x%x\n", byte_p);
|
|
reqp->xs->error = XS_DRIVER_STUFFUP;
|
|
}
|
|
}
|
|
|
|
/*
|
|
* We handle the following special condition below:
|
|
* -- The device disconnects in the middle of a write operation --
|
|
* In this case, the 5380 has already pre-fetched the next byte from
|
|
* the DMA-controller before the phase mismatch occurs. Therefore,
|
|
* leftover is 1 too low.
|
|
* This does not always happen! Therefore, we only do this when
|
|
* leftover is odd. This assumes that DMA transfers are _even_! This
|
|
* is normally the case on disks and types but might not always be.
|
|
* XXX: Check if ACK is consistently high on these occasions LWP
|
|
*/
|
|
if ((leftover & 1) && !(dmstat & SC_PHS_MTCH) && PH_OUT(reqp->phase))
|
|
leftover++;
|
|
|
|
/*
|
|
* Check if there are some 'restbytes' left in the DMA-controller.
|
|
*/
|
|
if (((u_long)byte_p & 3) && PH_IN(reqp->phase)) {
|
|
u_char *p, *q;
|
|
|
|
p = ptov(reqp, (u_long)byte_p & ~3);
|
|
q = (u_char*)&(SCSI_DMA->s_dma_res);
|
|
switch ((u_long)byte_p & 3) {
|
|
case 3: *p++ = *q++;
|
|
case 2: *p++ = *q++;
|
|
case 1: *p++ = *q++;
|
|
}
|
|
}
|
|
*bytes_left = leftover;
|
|
return ((dmastat & (SD_BUSERR|SD_ZERO)) ? 1 : 0);
|
|
}
|
|
|
|
#endif /* defined(TT_SCSI) */
|
|
|
|
#if defined(FALCON_SCSI) && !defined(TT_SCSI)
|
|
|
|
#define GET_5380_REG(rnum) get_falcon_5380_reg(rnum)
|
|
#define SET_5380_REG(rnum,val) set_falcon_5380_reg(rnum, val)
|
|
#define scsi_mach_init(sc) scsi_falcon_init(sc)
|
|
#define scsi_ienable() scsi_falcon_ienable()
|
|
#define scsi_idisable() scsi_falcon_idisable()
|
|
#define scsi_clr_ipend() scsi_falcon_clr_ipend()
|
|
#define scsi_ipending() scsi_falcon_ipending()
|
|
#define scsi_dma_setup(r,p,m) scsi_falcon_dmasetup(r, p, m)
|
|
#define wrong_dma_range(r,d) falcon_wrong_dma_range(r, d)
|
|
#define poll_edma(reqp) falcon_poll_edma(reqp)
|
|
#define get_dma_result(r, b) falcon_get_dma_result(r, b)
|
|
|
|
#define fair_to_keep_dma() (!st_dmawanted())
|
|
#define claimed_dma() falcon_claimed_dma()
|
|
#define reconsider_dma() falcon_reconsider_dma()
|
|
|
|
#endif /* defined(FALCON_SCSI) && !defined(TT_SCSI) */
|
|
|
|
#if defined(FALCON_SCSI)
|
|
|
|
static void fscsi_int __P((void));
|
|
|
|
static void scsi_falcon_init(sc)
|
|
struct ncr_softc *sc;
|
|
{
|
|
/*
|
|
* Enable disk related interrupts
|
|
*/
|
|
MFP->mf_ierb |= IB_DINT;
|
|
MFP->mf_iprb &= ~IB_DINT;
|
|
MFP->mf_imrb |= IB_DINT;
|
|
}
|
|
|
|
static u_char get_falcon_5380_reg(rnum)
|
|
u_short rnum;
|
|
{
|
|
DMA->dma_mode = DMA_SCSI + rnum;
|
|
return(DMA->dma_data);
|
|
}
|
|
|
|
static void set_falcon_5380_reg(rnum, val)
|
|
u_short rnum, val;
|
|
{
|
|
DMA->dma_mode = DMA_SCSI + rnum;
|
|
DMA->dma_data = val;
|
|
}
|
|
|
|
extern __inline__ void scsi_falcon_ienable()
|
|
{
|
|
MFP->mf_ierb |= IB_DINT;
|
|
}
|
|
|
|
extern __inline__ void scsi_falcon_idisable()
|
|
{
|
|
MFP->mf_ierb &= ~IB_DINT;
|
|
}
|
|
|
|
extern __inline__ void scsi_falcon_clr_ipend()
|
|
{
|
|
int tmp;
|
|
|
|
tmp = get_falcon_5380_reg(NCR5380_IRCV);
|
|
}
|
|
|
|
extern __inline__ int scsi_falcon_ipending()
|
|
{
|
|
return(!(MFP->mf_gpip & IO_DINT)
|
|
&& (get_falcon_5380_reg(NCR5380_DMSTAT) & SC_IRQ_SET));
|
|
}
|
|
|
|
static int falcon_wrong_dma_range(reqp, dm)
|
|
SC_REQ *reqp;
|
|
struct dma_chain *dm;
|
|
{
|
|
/*
|
|
* Do not allow chains yet! See also comment with
|
|
* falcon_poll_edma() !!!
|
|
*/
|
|
if (((dm - reqp->dm_chain) > 0) || (dm->dm_addr & 0xff000000)) {
|
|
reqp->dr_flag |= DRIVER_BOUNCING;
|
|
return(1);
|
|
}
|
|
/*
|
|
* Never allow DMA to happen on a Falcon when the transfer
|
|
* size is no multiple of 512. This is the transfer unit of the
|
|
* ST DMA-controller.
|
|
*/
|
|
if(dm->dm_count & 511)
|
|
return(1);
|
|
return(0);
|
|
}
|
|
|
|
static int falcon_lock = 0;
|
|
|
|
extern __inline__ falcon_claimed_dma()
|
|
{
|
|
if (!(falcon_lock & DMA_LOCK_GRANT)) {
|
|
if (falcon_lock) {
|
|
/*
|
|
* DMA access is being claimed.
|
|
*/
|
|
return(0);
|
|
}
|
|
if (!st_dmagrab(fscsi_int, run_main, &connected,&falcon_lock,1))
|
|
return(0);
|
|
}
|
|
return(1);
|
|
}
|
|
|
|
extern __inline__ void falcon_reconsider_dma()
|
|
{
|
|
if (falcon_lock && (connected == NULL) && (discon_q == NULL)) {
|
|
/*
|
|
* No need to keep DMA locked by us as we are not currently
|
|
* connected and no disconnected jobs are pending.
|
|
*/
|
|
st_dmafree(&connected, &falcon_lock);
|
|
}
|
|
|
|
if (!falcon_lock && (issue_q != NULL)) {
|
|
/*
|
|
* We must (re)claim DMA access as there are jobs
|
|
* waiting in the issue queue.
|
|
*/
|
|
st_dmagrab(fscsi_int, run_main, &connected, &falcon_lock, 0);
|
|
}
|
|
}
|
|
|
|
static void fal1_dma(dir, nsects, reqp)
|
|
u_int dir, nsects;
|
|
SC_REQ *reqp;
|
|
{
|
|
dir <<= 8;
|
|
st_dmaaddr_set((caddr_t)reqp->dm_cur->dm_addr);
|
|
DMA->dma_mode = 0x90 | dir;
|
|
DMA->dma_mode = 0x90 | (dir ^ DMA_WRBIT);
|
|
DMA->dma_mode = 0x90 | dir;
|
|
DMA->dma_data = nsects;
|
|
delay(2); /* _really_ needed (Thomas Gerner) */
|
|
DMA->dma_mode = 0x10 | dir;
|
|
}
|
|
|
|
static void scsi_falcon_dmasetup(reqp, phase, mode)
|
|
SC_REQ *reqp;
|
|
u_int phase;
|
|
u_char mode;
|
|
{
|
|
int nsects = reqp->dm_cur->dm_count / 512; /* XXX */
|
|
|
|
/*
|
|
* XXX: We should probably clear the fifo before putting the
|
|
* 5380 into DMA-mode.
|
|
*/
|
|
if (PH_IN(phase)) {
|
|
set_falcon_5380_reg(NCR5380_ICOM, 0);
|
|
set_falcon_5380_reg(NCR5380_MODE, mode);
|
|
set_falcon_5380_reg(NCR5380_IRCV, 0);
|
|
fal1_dma(0, nsects, reqp);
|
|
}
|
|
else {
|
|
set_falcon_5380_reg(NCR5380_MODE, mode);
|
|
set_falcon_5380_reg(NCR5380_ICOM, SC_ADTB);
|
|
set_falcon_5380_reg(NCR5380_DMSTAT, 0);
|
|
fal1_dma(1, nsects, reqp);
|
|
}
|
|
}
|
|
|
|
/*
|
|
* Falcon SCSI interrupt. _Always_ called at spl1!
|
|
*/
|
|
static void fscsi_int()
|
|
{
|
|
int itype;
|
|
int dma_done;
|
|
|
|
if (scsi_falcon_ipending()) {
|
|
scsi_falcon_idisable();
|
|
ncr_ctrl_intr(cur_softc);
|
|
}
|
|
}
|
|
|
|
static int
|
|
falcon_poll_edma(reqp)
|
|
SC_REQ *reqp;
|
|
{
|
|
int timeout = 9000; /* XXX */
|
|
|
|
/*
|
|
* Because of the Falcon hardware, it is impossible to reach
|
|
* the 5380 while doing DMA-transfers. So we have to rely on
|
|
* the interrupt line to determine if DMA-has finished. the
|
|
* DMA-controller itself will never fire an interrupt. This means
|
|
* that 'broken-up' DMA transfers are not (yet) possible on the
|
|
* Falcon.
|
|
*/
|
|
for (;;) {
|
|
delay(20);
|
|
if (--timeout <= 0) {
|
|
ncr_tprint(reqp, "Timeout on polled transfer\n");
|
|
reqp->xs->error = XS_DRIVER_STUFFUP;
|
|
return(0);
|
|
}
|
|
if (!(MFP->mf_gpip & IO_DINT))
|
|
break;
|
|
}
|
|
return(1);
|
|
}
|
|
|
|
static int
|
|
falcon_get_dma_result(reqp, bytes_left)
|
|
SC_REQ *reqp;
|
|
u_long *bytes_left;
|
|
{
|
|
int rv = 0;
|
|
int st_dmastat;
|
|
u_long bytes_done;
|
|
|
|
/*
|
|
* Select sector counter register first (See Atari docu.)
|
|
*/
|
|
DMA->dma_mode = 0x90;
|
|
if (!(st_dmastat = DMA->dma_stat) & 0x01) {
|
|
/*
|
|
* Misc. DMA-error according to Atari...
|
|
*/
|
|
ncr_tprint(reqp, "Unknow ST-SCSI error near 0x%x\n",
|
|
st_dmaaddr_get());
|
|
reqp->xs->error = XS_DRIVER_STUFFUP;
|
|
rv = 1;
|
|
}
|
|
if (st_dmastat & 0x02) {
|
|
/*
|
|
* Bytecount not zero.... As the fifo loads in 16 byte
|
|
* chunks, check if bytes are stuck in fifo.
|
|
* As we don't use DMA on chunks less than 512 bytes
|
|
* on the Falcon, report any residual not a multiple of
|
|
* 512 as an error...
|
|
*/
|
|
bytes_done = st_dmaaddr_get() - reqp->dm_cur->dm_addr;
|
|
if (bytes_done & 511) {
|
|
ncr_tprint(reqp, "Some bytes stuck in fifo\n");
|
|
bytes_done &= ~511;
|
|
reqp->xs->error = XS_DRIVER_STUFFUP;
|
|
}
|
|
*bytes_left = reqp->dm_cur->dm_count - bytes_done;
|
|
}
|
|
else {
|
|
*bytes_left = 0;
|
|
rv = 1;
|
|
}
|
|
return(rv);
|
|
}
|
|
|
|
#endif /* defined(FALCON_SCSI) */
|
|
|
|
#if defined(TT_SCSI) && defined(FALCON_SCSI)
|
|
/*
|
|
* Define some functions to support _both_ TT and Falcon SCSI
|
|
*/
|
|
|
|
/*
|
|
* Register access will be done through the following 2 function pointers.
|
|
*/
|
|
static u_char (*get_5380_reg)();
|
|
static void (*set_5380_reg)();
|
|
|
|
#define GET_5380_REG (*get_5380_reg)
|
|
#define SET_5380_REG (*set_5380_reg)
|
|
|
|
static void scsi_mach_init(sc)
|
|
struct ncr_softc *sc;
|
|
{
|
|
if (machineid & ATARI_FALCON) {
|
|
get_5380_reg = get_falcon_5380_reg;
|
|
set_5380_reg = set_falcon_5380_reg;
|
|
scsi_falcon_init(sc);
|
|
}
|
|
else {
|
|
get_5380_reg = get_tt_5380_reg;
|
|
set_5380_reg = set_tt_5380_reg;
|
|
scsi_tt_init(sc);
|
|
}
|
|
}
|
|
|
|
extern __inline__ void scsi_ienable()
|
|
{
|
|
if (machineid & ATARI_FALCON)
|
|
scsi_falcon_ienable();
|
|
else scsi_tt_ienable();
|
|
}
|
|
|
|
extern __inline__ void scsi_idisable()
|
|
{
|
|
if (machineid & ATARI_FALCON)
|
|
scsi_falcon_idisable();
|
|
else scsi_tt_idisable();
|
|
}
|
|
|
|
extern __inline__ void scsi_clr_ipend()
|
|
{
|
|
if (machineid & ATARI_FALCON)
|
|
scsi_falcon_clr_ipend();
|
|
else scsi_tt_clr_ipend();
|
|
}
|
|
|
|
extern __inline__ int scsi_ipending()
|
|
{
|
|
if (machineid & ATARI_FALCON)
|
|
return(scsi_falcon_ipending());
|
|
else return (GET_TT_REG(NCR5380_DMSTAT) & SC_IRQ_SET);
|
|
}
|
|
|
|
extern __inline__ scsi_dma_setup(reqp, phase, mbase)
|
|
SC_REQ *reqp;
|
|
u_int phase;
|
|
u_char mbase;
|
|
{
|
|
if (machineid & ATARI_FALCON)
|
|
scsi_falcon_dmasetup(reqp, phase, mbase);
|
|
else scsi_tt_dmasetup(reqp, phase, mbase);
|
|
}
|
|
|
|
extern __inline__ int wrong_dma_range(reqp, dm)
|
|
SC_REQ *reqp;
|
|
struct dma_chain *dm;
|
|
{
|
|
if (machineid & ATARI_FALCON)
|
|
return(falcon_wrong_dma_range(reqp, dm));
|
|
else return(tt_wrong_dma_range(reqp, dm));
|
|
}
|
|
|
|
extern __inline__ int poll_edma(reqp)
|
|
SC_REQ *reqp;
|
|
{
|
|
if (machineid & ATARI_FALCON)
|
|
return(falcon_poll_edma(reqp));
|
|
else return(tt_poll_edma(reqp));
|
|
}
|
|
|
|
extern __inline__ int get_dma_result(reqp, bytes_left)
|
|
SC_REQ *reqp;
|
|
u_long *bytes_left;
|
|
{
|
|
if (machineid & ATARI_FALCON)
|
|
return(falcon_get_dma_result(reqp, bytes_left));
|
|
else return(tt_get_dma_result(reqp, bytes_left));
|
|
}
|
|
|
|
/*
|
|
* Locking stuff. All turns into NOP's on the TT.
|
|
*/
|
|
#define fair_to_keep_dma() ((machineid & ATARI_FALCON) ? \
|
|
!st_dmawanted() : 1)
|
|
#define claimed_dma() ((machineid & ATARI_FALCON) ? \
|
|
falcon_claimed_dma() : 1)
|
|
#define reconsider_dma() { \
|
|
if(machineid & ATARI_FALCON) \
|
|
falcon_reconsider_dma();\
|
|
}
|
|
#endif /* defined(TT_SCSI) && defined(FALCON_SCSI) */
|
|
|
|
/**********************************************
|
|
* Functions present for both TT and Falcon. *
|
|
**********************************************/
|
|
/*
|
|
* Our autoconfig matching function
|
|
*/
|
|
static int
|
|
machine_match(pdp, cdp, auxp, cd)
|
|
struct device *pdp;
|
|
struct cfdata *cdp;
|
|
void *auxp;
|
|
struct cfdriver *cd;
|
|
{
|
|
if (strcmp(auxp, cd->cd_name))
|
|
return(0);
|
|
if (cdp->cf_unit != 0) /* Only one unit */
|
|
return(0);
|
|
return(1);
|
|
}
|
|
|
|
/*
|
|
* Bounce buffer (de)allocation. Those buffers are gotten from the ST-mem
|
|
* pool. Allocation here is both contiguous and in the lower 16Mb of
|
|
* the address space. Thus being DMA-able for all controllers.
|
|
*/
|
|
static u_char *
|
|
alloc_bounceb(len)
|
|
u_long len;
|
|
{
|
|
u_long tmp;
|
|
|
|
return((u_char *)alloc_stmem(len, &tmp));
|
|
}
|
|
|
|
static void
|
|
free_bounceb(bounceb)
|
|
u_char *bounceb;
|
|
{
|
|
free_stmem(bounceb);
|
|
}
|
|
|
|
/*
|
|
* 5380 interrupt.
|
|
*/
|
|
scsi_ctrl(sr)
|
|
int sr; /* sr at time of interrupt */
|
|
{
|
|
if (GET_5380_REG(NCR5380_DMSTAT) & SC_IRQ_SET) {
|
|
scsi_idisable();
|
|
if (!BASEPRI(sr))
|
|
add_sicallback(ncr_ctrl_intr, cur_softc, 0);
|
|
else {
|
|
spl1();
|
|
ncr_ctrl_intr(cur_softc);
|
|
}
|
|
}
|
|
}
|
|
|
|
/*
|
|
* DMA controller interrupt
|
|
*/
|
|
scsi_dma(sr)
|
|
int sr; /* sr at time of interrupt */
|
|
{
|
|
SC_REQ *reqp;
|
|
|
|
if ((reqp = connected) && (reqp->dr_flag & DRIVER_IN_DMA)) {
|
|
scsi_idisable();
|
|
if (!BASEPRI(sr))
|
|
add_sicallback(ncr_dma_intr, cur_softc, 0);
|
|
else {
|
|
spl1();
|
|
ncr_dma_intr(cur_softc);
|
|
}
|
|
}
|
|
}
|
|
|
|
/*
|
|
* Last but not least... Include the general driver code
|
|
*/
|
|
#include <atari/dev/ncr5380.c>
|