Aren
/
NetBSD
1
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity
NetBSD/sys/dev/ata/atavar.h

472 lines
16 KiB
C
Raw Blame History

/* $NetBSD: atavar.h,v 1.78 2008/11/16 19:31:21 bouyer Exp $ */
/*
* Copyright (c) 1998, 2001 Manuel Bouyer.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in the
* documentation and/or other materials provided with the distribution.
* 3. All advertising materials mentioning features or use of this software
* must display the following acknowledgement:
* This product includes software developed by Manuel Bouyer.
* 4. The name of the author may not be used to endorse or promote products
* derived from this software without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR
* IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES
* OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.
* IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
* NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
* DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
* THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
* (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
* THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
*/
#ifndef _DEV_ATA_ATAVAR_H_
#define _DEV_ATA_ATAVAR_H_
#include <sys/lock.h>
#include <sys/queue.h>
#include <dev/ata/ataconf.h>
/* XXX For scsipi_adapter and scsipi_channel. */
#include <dev/scsipi/scsipi_all.h>
#include <dev/scsipi/atapiconf.h>
/*
* Max number of drives per channel.
*/
#define ATA_MAXDRIVES 2
/*
* Description of a command to be handled by an ATA controller. These
* commands are queued in a list.
*/
struct ata_xfer {
volatile u_int c_flags; /* command state flags */
/* Channel and drive that are to process the request. */
struct ata_channel *c_chp;
int c_drive;
void *c_cmd; /* private request structure pointer */
void *c_databuf; /* pointer to data buffer */
int c_bcount; /* byte count left */
int c_skip; /* bytes already transferred */
int c_dscpoll; /* counter for dsc polling (ATAPI) */
int c_lenoff; /* offset to c_bcount (ATAPI) */
/* Link on the command queue. */
TAILQ_ENTRY(ata_xfer) c_xferchain;
/* Low-level protocol handlers. */
void (*c_start)(struct ata_channel *, struct ata_xfer *);
int (*c_intr)(struct ata_channel *, struct ata_xfer *, int);
void (*c_kill_xfer)(struct ata_channel *, struct ata_xfer *, int);
};
/* flags in c_flags */
#define C_ATAPI 0x0001 /* xfer is ATAPI request */
#define C_TIMEOU 0x0002 /* xfer processing timed out */
#define C_POLL 0x0004 /* command is polled */
#define C_DMA 0x0008 /* command uses DMA */
#define C_WAIT 0x0010 /* can use tsleep */
#define C_WAITACT 0x0020 /* wakeup when active */
#define C_FREE 0x0040 /* call ata_free_xfer() asap */
#define C_PIOBM 0x0080 /* command uses busmastering PIO */
/* reasons for c_kill_xfer() */
#define KILL_GONE 1 /* device is gone */
#define KILL_RESET 2 /* xfer was reset */
/* Per-channel queue of ata_xfers. May be shared by multiple channels. */
struct ata_queue {
TAILQ_HEAD(, ata_xfer) queue_xfer; /* queue of pending commands */
int queue_freeze; /* freeze count for the queue */
struct ata_xfer *active_xfer; /* active command */
int queue_flags; /* flags for this queue */
#define QF_IDLE_WAIT 0x01 /* someone is wants the controller idle */
};
/* ATA bus instance state information. */
struct atabus_softc {
device_t sc_dev;
struct ata_channel *sc_chan;
int sc_flags;
#define ATABUSCF_OPEN 0x01
};
/*
* A queue of atabus instances, used to ensure the same bus probe order
* for a given hardware configuration at each boot.
*/
struct atabus_initq {
TAILQ_ENTRY(atabus_initq) atabus_initq;
struct atabus_softc *atabus_sc;
};
#ifdef _KERNEL
TAILQ_HEAD(atabus_initq_head, atabus_initq);
extern struct atabus_initq_head atabus_initq_head;
extern struct simplelock atabus_interlock;
#endif /* _KERNEL */
/* High-level functions and structures used by both ATA and ATAPI devices */
struct ataparams;
/* Datas common to drives and controller drivers */
struct ata_drive_datas {
u_int8_t drive; /* drive number */
int8_t ata_vers; /* ATA version supported */
u_int16_t drive_flags; /* bitmask for drives present/absent and cap */
#define DRIVE_ATA 0x0001
#define DRIVE_ATAPI 0x0002
#define DRIVE_OLD 0x0004
#define DRIVE (DRIVE_ATA|DRIVE_ATAPI|DRIVE_OLD)
#define DRIVE_CAP32 0x0008
#define DRIVE_DMA 0x0010
#define DRIVE_UDMA 0x0020
#define DRIVE_MODE 0x0040 /* the drive reported its mode */
#define DRIVE_RESET 0x0080 /* reset the drive state at next xfer */
#define DRIVE_WAITDRAIN 0x0100 /* device is waiting for the queue to drain */
#define DRIVE_ATAPIST 0x0200 /* device is an ATAPI tape drive */
#define DRIVE_NOSTREAM 0x0400 /* no stream methods on this drive */
/*
* Current setting of drive's PIO, DMA and UDMA modes.
* Is initialised by the disks drivers at attach time, and may be
* changed later by the controller's code if needed
*/
u_int8_t PIO_mode; /* Current setting of drive's PIO mode */
#if NATA_DMA
u_int8_t DMA_mode; /* Current setting of drive's DMA mode */
#if NATA_UDMA
u_int8_t UDMA_mode; /* Current setting of drive's UDMA mode */
#endif
#endif
/* Supported modes for this drive */
u_int8_t PIO_cap; /* supported drive's PIO mode */
#if NATA_DMA
u_int8_t DMA_cap; /* supported drive's DMA mode */
#if NATA_UDMA
u_int8_t UDMA_cap; /* supported drive's UDMA mode */
#endif
#endif
/*
* Drive state.
* This is reset to 0 after a channel reset.
*/
u_int8_t state;
#define RESET 0
#define READY 1
#if NATA_DMA
/* numbers of xfers and DMA errs. Used by ata_dmaerr() */
u_int8_t n_dmaerrs;
u_int32_t n_xfers;
/* Downgrade after NERRS_MAX errors in at most NXFER xfers */
#define NERRS_MAX 4
#define NXFER 4000
#endif
/* Callbacks into the drive's driver. */
void (*drv_done)(void *); /* transfer is done */
device_t drv_softc; /* ATA drives softc, if any */
void *chnl_softc; /* channel softc */
};
/* User config flags that force (or disable) the use of a mode */
#define ATA_CONFIG_PIO_MODES 0x0007
#define ATA_CONFIG_PIO_SET 0x0008
#define ATA_CONFIG_PIO_OFF 0
#define ATA_CONFIG_DMA_MODES 0x0070
#define ATA_CONFIG_DMA_SET 0x0080
#define ATA_CONFIG_DMA_DISABLE 0x0070
#define ATA_CONFIG_DMA_OFF 4
#define ATA_CONFIG_UDMA_MODES 0x0700
#define ATA_CONFIG_UDMA_SET 0x0800
#define ATA_CONFIG_UDMA_DISABLE 0x0700
#define ATA_CONFIG_UDMA_OFF 8
/*
* Parameters/state needed by the controller to perform an ATA bio.
*/
struct ata_bio {
volatile u_int16_t flags;/* cmd flags */
#define ATA_NOSLEEP 0x0001 /* Can't sleep */
#define ATA_POLL 0x0002 /* poll for completion */
#define ATA_ITSDONE 0x0004 /* the transfer is as done as it gets */
#define ATA_SINGLE 0x0008 /* transfer must be done in singlesector mode */
#define ATA_LBA 0x0010 /* transfer uses LBA addressing */
#define ATA_READ 0x0020 /* transfer is a read (otherwise a write) */
#define ATA_CORR 0x0040 /* transfer had a corrected error */
#define ATA_LBA48 0x0080 /* transfer uses 48-bit LBA addressing */
int multi; /* # of blocks to transfer in multi-mode */
struct disklabel *lp; /* pointer to drive's label info */
daddr_t blkno; /* block addr */
daddr_t blkdone;/* number of blks transferred */
daddr_t nblks; /* number of block currently transferring */
int nbytes; /* number of bytes currently transferring */
long bcount; /* total number of bytes */
char *databuf;/* data buffer address */
volatile int error;
#define NOERROR 0 /* There was no error (r_error invalid) */
#define ERROR 1 /* check r_error */
#define ERR_DF 2 /* Drive fault */
#define ERR_DMA 3 /* DMA error */
#define TIMEOUT 4 /* device timed out */
#define ERR_NODEV 5 /* device has been gone */
#define ERR_RESET 6 /* command was terminated by channel reset */
u_int8_t r_error;/* copy of error register */
daddr_t badsect[127];/* 126 plus trailing -1 marker */
};
/*
* ATA/ATAPI commands description
*
* This structure defines the interface between the ATA/ATAPI device driver
* and the controller for short commands. It contains the command's parameter,
* the len of data's to read/write (if any), and a function to call upon
* completion.
* If no sleep is allowed, the driver can poll for command completion.
* Once the command completed, if the error registed is valid, the flag
* AT_ERROR is set and the error register value is copied to r_error .
* A separate interface is needed for read/write or ATAPI packet commands
* (which need multiple interrupts per commands).
*/
struct ata_command {
u_int8_t r_command; /* Parameters to upload to registers */
u_int8_t r_head;
u_int16_t r_cyl;
u_int8_t r_sector;
u_int8_t r_count;
u_int8_t r_features;
u_int8_t r_st_bmask; /* status register mask to wait for before
command */
u_int8_t r_st_pmask; /* status register mask to wait for after
command */
u_int8_t r_error; /* error register after command done */
volatile u_int16_t flags;
#define AT_READ 0x0001 /* There is data to read */
#define AT_WRITE 0x0002 /* There is data to write (excl. with AT_READ) */
#define AT_WAIT 0x0008 /* wait in controller code for command completion */
#define AT_POLL 0x0010 /* poll for command completion (no interrupts) */
#define AT_DONE 0x0020 /* command is done */
#define AT_XFDONE 0x0040 /* data xfer is done */
#define AT_ERROR 0x0080 /* command is done with error */
#define AT_TIMEOU 0x0100 /* command timed out */
#define AT_DF 0x0200 /* Drive fault */
#define AT_RESET 0x0400 /* command terminated by channel reset */
#define AT_GONE 0x0800 /* command terminated because device is gone */
#define AT_READREG 0x1000 /* Read registers on completion */
int timeout; /* timeout (in ms) */
void *data; /* Data buffer address */
int bcount; /* number of bytes to transfer */
void (*callback)(void *); /* command to call once command completed */
void *callback_arg; /* argument passed to *callback() */
};
/*
* ata_bustype. The first field must be compatible with scsipi_bustype,
* as it's used for autoconfig by both ata and atapi drivers.
*/
struct ata_bustype {
int bustype_type; /* symbolic name of type */
int (*ata_bio)(struct ata_drive_datas *, struct ata_bio *);
void (*ata_reset_drive)(struct ata_drive_datas *, int);
void (*ata_reset_channel)(struct ata_channel *, int);
/* extra flags for ata_reset_*(), in addition to AT_* */
#define AT_RST_EMERG 0x10000 /* emergency - e.g. for a dump */
#define AT_RST_NOCMD 0x20000 /* XXX has to go - temporary until we have tagged queuing */
int (*ata_exec_command)(struct ata_drive_datas *,
struct ata_command *);
#define ATACMD_COMPLETE 0x01
#define ATACMD_QUEUED 0x02
#define ATACMD_TRY_AGAIN 0x03
int (*ata_get_params)(struct ata_drive_datas *, u_int8_t,
struct ataparams *);
int (*ata_addref)(struct ata_drive_datas *);
void (*ata_delref)(struct ata_drive_datas *);
void (*ata_killpending)(struct ata_drive_datas *);
};
/* bustype_type */ /* XXX XXX XXX */
/* #define SCSIPI_BUSTYPE_SCSI 0 */
/* #define SCSIPI_BUSTYPE_ATAPI 1 */
#define SCSIPI_BUSTYPE_ATA 2
/*
* Describe an ATA device. Has to be compatible with scsipi_channel, so
* start with a pointer to ata_bustype.
*/
struct ata_device {
const struct ata_bustype *adev_bustype;
int adev_channel;
int adev_openings;
struct ata_drive_datas *adev_drv_data;
};
/*
* Per-channel data
*/
struct ata_channel {
struct callout ch_callout; /* callout handle */
int ch_channel; /* location */
struct atac_softc *ch_atac; /* ATA controller softc */
/* Our state */
volatile int ch_flags;
#define ATACH_SHUTDOWN 0x02 /* channel is shutting down */
#define ATACH_IRQ_WAIT 0x10 /* controller is waiting for irq */
#define ATACH_DMA_WAIT 0x20 /* controller is waiting for DMA */
#define ATACH_PIOBM_WAIT 0x40 /* controller is waiting for busmastering PIO */
#define ATACH_DISABLED 0x80 /* channel is disabled */
#define ATACH_TH_RUN 0x100 /* the kernel thread is working */
#define ATACH_TH_RESET 0x200 /* someone ask the thread to reset */
u_int8_t ch_status; /* copy of status register */
u_int8_t ch_error; /* copy of error register */
/* for the reset callback */
int ch_reset_flags;
/* per-drive info */
int ch_ndrive;
struct ata_drive_datas ch_drive[ATA_MAXDRIVES];
struct device *atabus; /* self */
/* ATAPI children */
struct device *atapibus;
struct scsipi_channel ch_atapi_channel;
/* ATA children */
struct device *ata_drives[ATA_MAXDRIVES];
/*
* Channel queues. May be the same for all channels, if hw
* channels are not independent.
*/
struct ata_queue *ch_queue;
/* The channel kernel thread */
struct lwp *ch_thread;
};
/*
* ATA controller softc.
*
* This contains a bunch of generic info that all ATA controllers need
* to have.
*
* XXX There is still some lingering wdc-centricity here.
*/
struct atac_softc {
device_t atac_dev; /* generic device info */
int atac_cap; /* controller capabilities */
#define ATAC_CAP_DATA16 0x0001 /* can do 16-bit data access */
#define ATAC_CAP_DATA32 0x0002 /* can do 32-bit data access */
#define ATAC_CAP_DMA 0x0008 /* can do ATA DMA modes */
#define ATAC_CAP_UDMA 0x0010 /* can do ATA Ultra DMA modes */
#define ATAC_CAP_PIOBM 0x0020 /* can do busmastering PIO transfer */
#define ATAC_CAP_ATA_NOSTREAM 0x0040 /* don't use stream funcs on ATA */
#define ATAC_CAP_ATAPI_NOSTREAM 0x0080 /* don't use stream funcs on ATAPI */
#define ATAC_CAP_NOIRQ 0x1000 /* controller never interrupts */
#define ATAC_CAP_RAID 0x4000 /* controller "supports" RAID */
uint8_t atac_pio_cap; /* highest PIO mode supported */
#if NATA_DMA
uint8_t atac_dma_cap; /* highest DMA mode supported */
#if NATA_UDMA
uint8_t atac_udma_cap; /* highest UDMA mode supported */
#endif
#endif
/* Array of pointers to channel-specific data. */
struct ata_channel **atac_channels;
int atac_nchannels;
const struct ata_bustype *atac_bustype_ata;
/*
* Glue between ATA and SCSIPI for the benefit of ATAPI.
*
* Note: The reference count here is used for both ATA and ATAPI
* devices.
*/
struct atapi_adapter atac_atapi_adapter;
void (*atac_atapibus_attach)(struct atabus_softc *);
/* Driver callback to probe for drives. */
void (*atac_probe)(struct ata_channel *);
/* Optional callbacks to lock/unlock hardware. */
int (*atac_claim_hw)(struct ata_channel *, int);
void (*atac_free_hw)(struct ata_channel *);
/*
* Optional callbacks to set drive mode. Required for anything
* but basic PIO operation.
*/
void (*atac_set_modes)(struct ata_channel *);
};
#ifdef _KERNEL
void ata_channel_attach(struct ata_channel *);
int atabusprint(void *aux, const char *);
int ataprint(void *aux, const char *);
struct ataparams;
int ata_get_params(struct ata_drive_datas *, u_int8_t, struct ataparams *);
int ata_set_mode(struct ata_drive_datas *, u_int8_t, u_int8_t);
/* return code for these cmds */
#define CMD_OK 0
#define CMD_ERR 1
#define CMD_AGAIN 2
struct ata_xfer *ata_get_xfer(int);
void ata_free_xfer(struct ata_channel *, struct ata_xfer *);
#define ATAXF_CANSLEEP 0x00
#define ATAXF_NOSLEEP 0x01
void ata_exec_xfer(struct ata_channel *, struct ata_xfer *);
void ata_kill_pending(struct ata_drive_datas *);
void ata_reset_channel(struct ata_channel *, int);
int ata_addref(struct ata_channel *);
void ata_delref(struct ata_channel *);
void atastart(struct ata_channel *);
void ata_print_modes(struct ata_channel *);
#if NATA_DMA
int ata_downgrade_mode(struct ata_drive_datas *, int);
#endif
void ata_probe_caps(struct ata_drive_datas *);
#if NATA_DMA
void ata_dmaerr(struct ata_drive_datas *, int);
#endif
void ata_queue_idle(struct ata_queue *);
#endif /* _KERNEL */
#endif /* _DEV_ATA_ATAVAR_H_ */
Reference in New Issue View Git Blame Copy Permalink