NetBSD/sys/arch/atari/dev/serreg.h

83 lines
3.5 KiB
C

/* $NetBSD: serreg.h,v 1.1 1997/05/25 12:41:58 leo Exp $ */
/*-
* Copyright (c) 1997 The NetBSD Foundation, Inc.
* All rights reserved.
*
* This code is derived from software contributed to The NetBSD Foundation
* by Leo Weppelman.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in the
* documentation and/or other materials provided with the distribution.
* 3. All advertising materials mentioning features or use of this software
* must display the following acknowledgement:
* This product includes software developed by the NetBSD
* Foundation, Inc. and its contributors.
* 4. Neither the name of The NetBSD Foundation nor the names of its
* contributors may be used to endorse or promote products derived
* from this software without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE NETBSD FOUNDATION, INC. AND CONTRIBUTORS
* ``AS IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED
* TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
* PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE FOUNDATION OR CONTRIBUTORS
* BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
* CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
* SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
* INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
* CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
* ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
* POSSIBILITY OF SUCH DAMAGE.
*/
#define SER_FREQ 153600 /* XXX: Assumes UCR_CLKDIV set! */
#define SER_TOLERANCE 30 /* Baud rate tolerance, in 0.1% units */
/* Usart Control Register */
#define UCR_PEVEN 0x02 /* Even parity */
#define UCR_PENAB 0x04 /* Parity enable */
#define UCR_SYNCH 0x00 /* Synchroneous mode */
#define UCR_STOPB1 0x08 /* 1 stopbit */
#define UCR_STOPB15 0x10 /* 1.5 stopbit */
#define UCR_STOPB2 0x18 /* 2 stopbits */
#define UCR_8BITS 0x00 /* 8 databits */
#define UCR_7BITS 0x20 /* 7 databits */
#define UCR_6BITS 0x40 /* 6 databits */
#define UCR_5BITS 0x60 /* 5 databits */
#define UCR_CLKDIV 0x80 /* Divide clock by 16 */
/* Receiver Status Register */
#define RSR_ENAB 0x01 /* Receiver enabled */
#define RSR_SS 0x02 /* Synchroneous strip */
#define RSR_CIP 0x04 /* Character in progress (async) */
#define RSR_BREAK 0x08 /* Break (async) */
#define RSR_MATCH 0x04 /* Character match (sync) */
#define RSR_FS 0x08 /* Found/Search (sync) */
#define RSR_FERR 0x10 /* Framing error */
#define RSR_PERR 0x20 /* Parity error */
#define RSR_OERR 0x40 /* Overrun error */
#define RSR_BFULL 0x80 /* Buffer Full */
/* Transmitter Status Register */
#define TSR_ENAB 0x01 /* Transmitter Enable */
#define TSR_SBREAK 0x08 /* Transmit Break */
#define TSR_END 0x10 /* End of character */
#define TSR_UE 0x40 /* Uart empty */
#define TSR_BE 0x80 /* Buffer empty */
/*
* These bits are a mixture of MFP.mf_gpip and PSG.ioa values.
* Luckily, they were all distinct.
*/
#define MCR_RTS 0x08
#define MCR_CTS 0x04
#define MCR_DCD 0x02
#define MCR_DTR 0x10
#define MCR_RI 0x40