NetBSD/sys/arch/pc532/dev/scnvar.h

162 lines
5.6 KiB
C

/* $NetBSD: scnvar.h,v 1.1 1996/10/23 07:52:39 matthias Exp $ */
/*
* Copyright (c) 1996 Phil Budne.
* Copyright (c) 1993 Philip A. Nelson.
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in the
* documentation and/or other materials provided with the distribution.
* 3. All advertising materials mentioning features or use of this software
* must display the following acknowledgement:
* This product includes software developed by Philip A. Nelson.
* 4. The name of Philip A. Nelson may not be used to endorse or promote
* products derived from this software without specific prior written
* permission.
*
* THIS SOFTWARE IS PROVIDED BY PHILIP NELSON ``AS IS'' AND ANY EXPRESS OR
* IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES
* OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.
* IN NO EVENT SHALL PHILIP NELSON BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
* SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO,
* PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS;
* OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY,
* WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR
* OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF
* ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
*
* scnvar.h: definitions for pc532 2681/2692 duart driver
*/
/* Constants. */
#ifdef COMDEF_SPEED
#undef TTYDEF_SPEED
#define TTYDEF_SPEED COMDEF_SPEED /* default baud rate */
#endif
#define SCN_FIRST_ADR 0x28000000 /* address of first RS232 port */
#define SCN_FIRST_MAP_ADR 0xFFC80000 /* mapped address of first port */
#define SCN_SIZE 0x8 /* address space for port */
#define SCN_CONSOLE 0 /* minor number of console */
#define SCN_CON_MAP_STAT 0xFFC80001 /* raw addresses for console */
#define SCN_CON_MAP_DATA 0xFFC80003 /* Mapped .... */
#define SCN_CON_MAP_ISR 0xFFC80005
#define SCN_CON_STAT 0x28000001 /* raw addresses for console */
#define SCN_CON_DATA 0x28000003 /* Unmapped .... */
#define SCN_CON_ISR 0x28000005
/* output port bits */
#define OP_RTSA OP_OP0
#define OP_RTSB OP_OP1
#define OP_DTRA OP_OP2
#define OP_DTRB OP_OP3
/* OP4-7 not connected */
/* input port bits */
#define IP_CTSA IP_IP0
#define IP_CTSB IP_IP1
#define IP_DCDB IP_IP2
#define IP_DCDA IP_IP3
/* IP4-6 not connected */
#define ACR_DELTA_CTSA ACR_DELTA_IP0
#define ACR_DELTA_CTSB ACR_DELTA_IP1
#define ACR_DELTA_DCDB ACR_DELTA_IP2
#define ACR_DELTA_DCDA ACR_DELTA_IP3
#define IPCR_CTSA IPCR_IP0
#define IPCR_CTSB IPCR_IP1
#define IPCR_DCDB IPCR_IP2
#define IPCR_DCDA IPCR_IP3
#define IPCR_DELTA_CTSA IPCR_DELTA_IP0
#define IPCR_DELTA_CTSB IPCR_DELTA_IP1
#define IPCR_DELTA_DCDB IPCR_DELTA_IP2
#define IPCR_DELTA_DCDA IPCR_DELTA_IP3
#define SP_GRP0 0x00
#define SP_GRP1 0x10
#define SP_BOTH 0x20
#define SCN_OP_BIS(SC,VAL) ((SC)->duart->base[DU_OPSET] = (VAL))
#define SCN_OP_BIC(SC,VAL) ((SC)->duart->base[DU_OPCLR] = (VAL))
#define SCN_DCD(SC) (((SC)->duart->base[DU_IP] & (SC)->sc_ip_dcd) == 0)
/* pc532 duarts are auto-sized to byte-wide */
#define CH_SZ 8
#define DUART_SZ 16
#define SCN_REG(n) (n) /* n'th reg at n'th byte!! */
/* The DUART description struct; for data common to both channels */
struct duart_info {
int i_speed[2], o_speed[2]; /* Channel A and B speeds. */
char i_code[2], o_code[2]; /* Channel A and B speeds. */
char speed_grp; /* BRG speed group */
char acr_bits; /* ACR bits 0-6 */
char imr_int_bits; /* IMR bits current set. */
char opcr_bits; /* OPCR bits to set */
volatile u_char *base;
};
#define SCN_RING_BITS 9 /* 512 byte buffers */
#define SCN_RING_SIZE (1<<SCN_RING_BITS) /* must be a power of two */
#define SCN_RING_MASK (SCN_RING_SIZE-1)
#define SCN_RING_THRESH (SCN_RING_SIZE/2)
/* scn channel state */
struct scn_softc {
struct device scn_dev;
struct tty *scn_tty;
/* XXXPLB: prefix with scn_; */
int unit; /* unit number of this line (base 0) */
struct duart_info *duart; /* pointer to duart struct */
volatile u_char *chbase; /* per-channel registers (CH_xxx) */
u_char lstatus; /* last line status (sr) */
u_char scn_swflags; /* from config / TIOCxFLAGS */
#define SCN_SW_SOFTCAR 0x01
#define SCN_SW_CLOCAL 0x02
#define SCN_SW_CRTSCTS 0x04
#define SCN_SW_MDMBUF 0x08 /* not implemented */
/* I wish there was a TS_DIALOUT flag! */
u_char scn_dialout; /* set if open for dialout */
#define SCN_DIALOUT(SCN) ((SCN)->scn_dialout)
#define SCN_SETDIALOUT(SCN) (SCN)->scn_dialout = 1
#define SCN_CLRDIALOUT(SCN) (SCN)->scn_dialout = 0
/* bits in input port register */
u_char sc_ip_dcd;
u_char sc_ip_cts;
/* bits in output port registers */
u_char sc_op_rts;
u_char sc_op_dtr;
/* interrupt mask bits */
u_char sc_tx_int;
/* error counts */
u_long framing_errors; /* NYI */
u_long overrun_errors;
u_long parity_errors; /* NYI */
u_long break_interrupts; /* NYI */
/* ring buffer for rxrdy interrupt */
u_int sc_rbget; /* ring buffer `get' index */
volatile u_int sc_rbput; /* ring buffer `put' index */
short sc_rbuf[SCN_RING_SIZE]; /* status + data */
long sc_fotime; /* last fifo overrun message */
long sc_rotime; /* last ring overrun message */
u_long ring_overruns; /* number of ring buffer overruns */
};