NetBSD/etc/gettytab
perry cb606faa7a add :ht: to the Pc entry so wscons consoles will have proper tab
handling (i.e. not oxtabs.)
From Geoff C. Wing in PR misc/21006
2003-04-04 16:43:38 +00:00

155 lines
3.4 KiB
Plaintext

# $NetBSD: gettytab,v 1.17 2003/04/04 16:43:38 perry Exp $
# from: @(#)gettytab 8.2 (Berkeley) 4/20/94
#
# Most of the table entries here are just copies of the old getty table,
# it is by no means certain, or even likely, that any of them are optimal
# for any purpose whatever. Nor is it likely that more than a couple are
# even correct.
#
# The default gettytab entry, used to set defaults for all other
# entries, and in cases where getty is called with no table name
#
default:\
:ce:ck:np:im=\r\n%s/%m (%h) (%t)\r\n\r\n:
#
# Fixed speed entries
#
# The "std.NNN" names are known to the special case
# portselector code in getty, however they can
# be assigned to any table desired.
# The "NNN-baud" names are known to the special case
# autobaud code in getty, and likewise can
# be assigned to any table desired (hopefully the same speed).
#
std.110|110-baud:\
:sp#110:
std.300|300-baud:\
:sp#300:
std.600|600-baud:\
:sp#600:
std.1200|1200-baud:\
:sp#1200:
std.2400|2400-baud:\
:sp#2400:
std.4800|4800-baud:\
:sp#4800:
std.9600|9600-baud:\
:sp#9600:
std.19200|19200-baud:\
:sp#19200:
std.38400|38400-baud:\
:sp#38400:
std.57600|57600-baud:\
:sp#57600:
std.115200|115200-baud:\
:sp#115200:
# PPP network link login
#
# these entries can be used by ISPs or others who want to be able
# to offer both a "shell" and a PPP login on the same port. Setting
# the "pp" attribute allows getty(8) to recognize a PPP link start
# negotiation, and invoke the program listed, in addition to normal
# login(1).
#
# N.B.: if PPP is recognized, this bypasses normal login/password
# exchange; the expectation is that you'll configure pppd (or whatever)
# to require a PAP or CHAP handshake for authentication after PPP is
# started up.
#
# It is also recommended that you use hardware (CTS/RTS) flow control
# on the port, and run the port as fast as possible, to allow modems
# extra time to do data compression, if enabled.
#
ppp:np:ce:ck:pp=/usr/sbin/pppd:
#
ppp.19200|PPP-19200:sp#19200:tc=ppp:
ppp.38400|PPP-38400:sp#38400:tc=ppp:
ppp.57600|PPP-57600:sp#57600:tc=ppp:
ppp.115200|PPP-115200:sp#115200:tc=ppp:
ppp.230400|PPP-230400:sp#230400:tc=ppp:
#
# Dial in rotary tables, speed selection via 'break'
#
d1200|Dial-1200:\
:nx=d300:sp#1200:
d300|Dial-300:\
:nx=d1200:sp#300:
#
# Fast dialup terminals, 2400/1200/300 rotary (can start either way)
#
D2400|d2400|Fast-Dial-2400:\
:nx=D1200:tc=2400-baud:
D1200|Fast-Dial-1200:\
:nx=D300:tc=1200-baud:
D300|Fast-Dial-300:\
:nx=D2400:tc=300-baud:
#
#telebit (19200)
#
t19200:\
:nx=t2400:tc=19200-baud:
t2400:\
:nx=t1200:tc=2400-baud:
t1200:\
:nx=t19200:tc=1200-baud:
#
#telebit (9600)
#
t9600:\
:nx=t2400a:tc=19200-baud:
t2400a:\
:nx=t1200a:tc=2400-baud:
t1200a:\
:nx=t9600:tc=1200-baud:
#
# Odd special case terminals
#
Console|Console Decwriter II:\
:rw:tc=300-baud:
Console-1200|Console Decwriter III:\
:rw:tc=1200-baud:
X|Xwindow|X window system:\
:rw:sp#9600:
Pc|Pc console:\
:np:sp#9600:ig:ht:
# 8 bit clean Sun console
suncons|Sun Console:\
:np:sp#9600:
#
# Plugboard, and misc other terminals
#
plug-9600|Plugboard-9600:\
:pf#1:tc=9600-baud:
P9600|Plugboard-9600-rotary:\
:pf#1:nx=P300:tc=9600-baud:
P300|Plugboard-300:\
:pf#1:nx=P1200:tc=300-baud:
P1200|Plugboard-1200:\
:pf#1:nx=P9600:tc=1200-baud:
#
# XXXX Port selector
#
DSW|Port Selector:\
:ps:sp#2400:
#
# Auto-baud speed detect entry for Micom 600.
# Special code in getty will switch this out
# to one of the NNN-baud entries.
#
Auto-baud:\
:ab:sp#2400:f0#040: