105 lines
2.8 KiB
C
105 lines
2.8 KiB
C
/* $NetBSD: cyvar.h,v 1.4 1997/06/17 05:32:46 cgd Exp $ */
|
|
|
|
/*
|
|
* cy_var.h
|
|
*
|
|
* Driver for Cyclades Cyclom-8/16/32 multiport serial cards
|
|
* (currently not tested with Cyclom-32 cards)
|
|
*
|
|
* Timo Rossi, 1996
|
|
*
|
|
* Supports both ISA and PCI Cyclom cards
|
|
*/
|
|
|
|
/* #define CY_DEBUG */
|
|
#define CY_DEBUG1
|
|
|
|
/*
|
|
* Maximum number of ports per card
|
|
*/
|
|
#define CY_MAX_PORTS (CD1400_NO_OF_CHANNELS * CY_MAX_CD1400s)
|
|
|
|
#define CY_RX_FIFO_THRESHOLD 6
|
|
|
|
/*
|
|
* Automatic RTS (or actually DTR, the RTS and DTR lines need to be
|
|
* exchanged) handshake threshold used if CY_HW_RTS is defined
|
|
*/
|
|
#define CY_RX_DTR_THRESHOLD 9
|
|
|
|
/*
|
|
* Port number on card encoded in low 5 bits
|
|
* card number in next 2 bits (only space for 4 cards)
|
|
* high bit reserved for dialout flag
|
|
*/
|
|
#define CY_PORT(x) (minor(x) & 0x1f)
|
|
#define CY_CARD(x) ((minor(x) >> 5) & 3)
|
|
#define CY_DIALOUT(x) ((minor(x) & 0x80) != 0)
|
|
#define CY_DIALIN(x) (!CY_DIALOUT(x))
|
|
|
|
/*
|
|
* read/write cd1400 registers (when sc_softc-structure is available)
|
|
*/
|
|
#define cd_read_reg(sc,chip,reg) bus_space_read_1(sc->sc_memt, \
|
|
sc->sc_bsh, sc->sc_cd1400_offs[chip] + \
|
|
(((reg << 1)) << sc->sc_bustype))
|
|
|
|
#define cd_write_reg(sc,chip,reg,val) bus_space_write_1(sc->sc_memt, \
|
|
sc->sc_bsh, sc->sc_cd1400_offs[chip] + \
|
|
(((reg << 1))<< sc->sc_bustype), (val))
|
|
|
|
/*
|
|
* ibuf is a simple ring buffer. It is always used two
|
|
* bytes at a time (status and data)
|
|
*/
|
|
#define CY_IBUF_SIZE (2*512)
|
|
|
|
/* software state for one port */
|
|
struct cy_port {
|
|
int cy_port_num;
|
|
int cy_chip;
|
|
struct tty *cy_tty;
|
|
int cy_openflags;
|
|
int cy_fifo_overruns;
|
|
int cy_ibuf_overruns;
|
|
u_char cy_channel_control; /* last CCR channel control
|
|
* command bits */
|
|
u_char cy_carrier_stat; /* copied from MSVR2 */
|
|
u_char cy_flags;
|
|
u_char *cy_ibuf, *cy_ibuf_end;
|
|
u_char *cy_ibuf_rd_ptr, *cy_ibuf_wr_ptr;
|
|
#ifdef CY_DEBUG1
|
|
int cy_rx_int_count;
|
|
int cy_tx_int_count;
|
|
int cy_modem_int_count;
|
|
int cy_start_count;
|
|
#endif /* CY_DEBUG1 */
|
|
};
|
|
|
|
#define CY_F_CARRIER_CHANGED 0x01
|
|
#define CY_F_START_BREAK 0x02
|
|
#define CY_F_END_BREAK 0x04
|
|
#define CY_F_STOP 0x08
|
|
#define CY_F_SEND_NUL 0x10
|
|
#define CY_F_START 0x20
|
|
|
|
/* software state for one card */
|
|
struct cy_softc {
|
|
struct device sc_dev;
|
|
void *sc_ih;
|
|
bus_space_tag_t sc_memt;
|
|
bus_space_handle_t sc_bsh;
|
|
int sc_bustype;
|
|
int sc_nchips; /* Number of cd1400's on this card */
|
|
int sc_cd1400_offs[CY_MAX_CD1400s];
|
|
struct cy_port sc_ports[CY_MAX_PORTS];
|
|
#ifdef CY_DEBUG1
|
|
int sc_poll_count1;
|
|
int sc_poll_count2;
|
|
#endif
|
|
};
|
|
|
|
int cy_find __P((struct cy_softc *));
|
|
void cy_attach __P((struct device *, struct device *, void *));
|
|
int cy_intr __P((void *));
|