NetBSD/sys/dev/ata/wdvar.h
bouyer 26f6c9a9cf - DMA code cleanup: pciide_dma_finish() doesn't stop/unload the current DMA op
if an IRQ was not detected, unless the force flag was given. Use this to
  detect if the IRQ was for us (closer to shared IRQ for controllers which
  don't have their own IRQ handler in pciide.c) and to poll for DMA xfer.
  Also makes the timeout recovery code simpler.
- ATAPI cleanup: don't call controller-specific functions from atapiconf.c
  (wdc_*), so that it's possible to attach an atapibus to something else
  than a wdc/pciide (Hi Lennart :).
  Overload struct scsi_adapter with struct atapi_adapter, defined
  as struct scsi_adapter + atapi-specific callbacks. scsipi_link still points
  to an scsi_adapter, atapi code casts it to atapi_adapter if needed.
  Move atapi_softc to atapiconf.h so that it can be used by the underlying
  controller code (e.g. atapi_wdc.c).
  Add an atapi-specific callback *atapi_probedev(), which probe a drive
  in a controller-specific way, allocate the sc_link and fills in the
  ataparams if needed. It then calls atapi_probedev() (from atapiconf.c)
  to do the generic initialisations and attach the device.
- While I'm there merge and centralise the state definitions in atavar.h.
  It should now be possible to use a common ata/atapi routine to set the
  drive's modes (will do later).
2000-04-01 14:32:22 +00:00

68 lines
3.3 KiB
C

/* $NetBSD: wdvar.h,v 1.5 2000/04/01 14:32:25 bouyer Exp $ */
/*
* Copyright (c) 1998 Manuel Bouyer.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in the
* documentation and/or other materials provided with the distribution.
* 3. All advertising materials mentioning features or use of this software
* must display the following acknowledgement:
* This product includes software developed by the University of
* California, Berkeley and its contributors.
* 4. Neither the name of the University nor the names of its contributors
* may be used to endorse or promote products derived from this software
* without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE REGENTS AND CONTRIBUTORS ``AS IS'' AND
* ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
* ARE DISCLAIMED. IN NO EVENT SHALL THE REGENTS OR CONTRIBUTORS BE LIABLE
* FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
* OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
* HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
* OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
* SUCH DAMAGE.
*
*/
/* Params needed by the controller to perform an ATA bio */
struct ata_bio {
volatile u_int16_t flags; /* cmd flags */
#define ATA_NOSLEEP 0x0001 /* Can't sleep */
#define ATA_POLL 0x0002 /* poll for completion */
#define ATA_ITSDONE 0x0004 /* the transfer is as done as it gets */
#define ATA_SINGLE 0x0008 /* transfer has to be done in single-sector mode */
#define ATA_LBA 0x0010 /* tranfert uses LBA adressing */
#define ATA_READ 0x0020 /* tranfert is a read (otherwise a write) */
#define ATA_CORR 0x0040 /* transfer had a corrected error */
int multi; /* number of blocks to transfer in multi-mode */
struct disklabel *lp; /* pointer to drive's label info */
daddr_t blkno; /* block addr */
daddr_t blkdone; /* number of blks transfered */
daddr_t nblks; /* number of block currently transfering */
int nbytes; /* number of bytes currently transfering */
long bcount; /* total number of bytes */
char* databuf; /* data buffer adress */
volatile int error;
#define NOERROR 0 /* There was no error (r_error invalid) */
#define ERROR 1 /* check r_error */
#define ERR_DF 2 /* Drive fault */
#define ERR_DMA 3 /* DMA error */
#define TIMEOUT 4 /* device timed out */
#define ERR_NODEV 5 /* device has been gone */
u_int8_t r_error; /* copy of error register */
daddr_t badsect[127]; /* 126 plus trailing -1 marker */
};
int wdc_ata_bio __P((struct ata_drive_datas*, struct ata_bio*));
void wddone __P((void *));