Aren
/
NetBSD
1
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity
NetBSD/sys/dev/i2o/iopsp.c

679 lines
18 KiB
C
Raw Blame History

/* $NetBSD: iopsp.c,v 1.18 2003/06/13 02:33:09 thorpej Exp $ */
/*-
* Copyright (c) 2000, 2001 The NetBSD Foundation, Inc.
* All rights reserved.
*
* This code is derived from software contributed to The NetBSD Foundation
* by Andrew Doran.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in the
* documentation and/or other materials provided with the distribution.
* 3. All advertising materials mentioning features or use of this software
* must display the following acknowledgement:
* This product includes software developed by the NetBSD
* Foundation, Inc. and its contributors.
* 4. Neither the name of The NetBSD Foundation nor the names of its
* contributors may be used to endorse or promote products derived
* from this software without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE NETBSD FOUNDATION, INC. AND CONTRIBUTORS
* ``AS IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED
* TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
* PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE FOUNDATION OR CONTRIBUTORS
* BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
* CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
* SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
* INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
* CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
* ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
* POSSIBILITY OF SUCH DAMAGE.
*/
/*
* Raw SCSI device support for I2O. IOPs present SCSI devices individually;
* we group them by controlling port.
*/
#include <sys/cdefs.h>
__KERNEL_RCSID(0, "$NetBSD: iopsp.c,v 1.18 2003/06/13 02:33:09 thorpej Exp $");
#include "opt_i2o.h"
#include <sys/param.h>
#include <sys/systm.h>
#include <sys/kernel.h>
#include <sys/device.h>
#include <sys/queue.h>
#include <sys/proc.h>
#include <sys/buf.h>
#include <sys/endian.h>
#include <sys/malloc.h>
#include <sys/scsiio.h>
#include <sys/lock.h>
#include <machine/bswap.h>
#include <machine/bus.h>
#include <dev/scsipi/scsi_all.h>
#include <dev/scsipi/scsi_disk.h>
#include <dev/scsipi/scsipi_all.h>
#include <dev/scsipi/scsiconf.h>
#include <dev/scsipi/scsi_message.h>
#include <dev/i2o/i2o.h>
#include <dev/i2o/iopio.h>
#include <dev/i2o/iopvar.h>
#include <dev/i2o/iopspvar.h>
static void iopsp_adjqparam(struct device *, int);
static void iopsp_attach(struct device *, struct device *, void *);
static void iopsp_intr(struct device *, struct iop_msg *, void *);
static int iopsp_ioctl(struct scsipi_channel *, u_long,
caddr_t, int, struct proc *);
static int iopsp_match(struct device *, struct cfdata *, void *);
static int iopsp_rescan(struct iopsp_softc *);
static int iopsp_reconfig(struct device *);
static void iopsp_scsipi_request(struct scsipi_channel *,
scsipi_adapter_req_t, void *);
CFATTACH_DECL(iopsp, sizeof(struct iopsp_softc),
iopsp_match, iopsp_attach, NULL, NULL);
/*
* Match a supported device.
*/
static int
iopsp_match(struct device *parent, struct cfdata *match, void *aux)
{
struct iop_attach_args *ia;
struct {
struct i2o_param_op_results pr;
struct i2o_param_read_results prr;
struct i2o_param_hba_ctlr_info ci;
} __attribute__ ((__packed__)) param;
ia = aux;
if (ia->ia_class != I2O_CLASS_BUS_ADAPTER_PORT)
return (0);
if (iop_field_get_all((struct iop_softc *)parent, ia->ia_tid,
I2O_PARAM_HBA_CTLR_INFO, &param, sizeof(param), NULL) != 0)
return (0);
return (param.ci.bustype == I2O_HBA_BUS_SCSI ||
param.ci.bustype == I2O_HBA_BUS_FCA);
}
/*
* Attach a supported device.
*/
static void
iopsp_attach(struct device *parent, struct device *self, void *aux)
{
struct iop_attach_args *ia;
struct iopsp_softc *sc;
struct iop_softc *iop;
struct {
struct i2o_param_op_results pr;
struct i2o_param_read_results prr;
union {
struct i2o_param_hba_ctlr_info ci;
struct i2o_param_hba_scsi_ctlr_info sci;
struct i2o_param_hba_scsi_port_info spi;
} p;
} __attribute__ ((__packed__)) param;
int fc, rv;
#ifdef I2OVERBOSE
int size;
#endif
ia = (struct iop_attach_args *)aux;
sc = (struct iopsp_softc *)self;
iop = (struct iop_softc *)parent;
/* Register us as an initiator. */
sc->sc_ii.ii_dv = self;
sc->sc_ii.ii_intr = iopsp_intr;
sc->sc_ii.ii_flags = 0;
sc->sc_ii.ii_tid = ia->ia_tid;
sc->sc_ii.ii_reconfig = iopsp_reconfig;
sc->sc_ii.ii_adjqparam = iopsp_adjqparam;
iop_initiator_register(iop, &sc->sc_ii);
rv = iop_field_get_all(iop, ia->ia_tid, I2O_PARAM_HBA_CTLR_INFO,
&param, sizeof(param), NULL);
if (rv != 0)
goto bad;
fc = (param.p.ci.bustype == I2O_HBA_BUS_FCA);
/*
* Say what the device is. If we can find out what the controling
* device is, say what that is too.
*/
printf(": SCSI port");
iop_print_ident(iop, ia->ia_tid);
printf("\n");
rv = iop_field_get_all(iop, ia->ia_tid, I2O_PARAM_HBA_SCSI_CTLR_INFO,
&param, sizeof(param), NULL);
if (rv != 0)
goto bad;
#ifdef I2OVERBOSE
printf("%s: ", sc->sc_dv.dv_xname);
if (fc)
printf("FC");
else
printf("%d-bit", param.p.sci.maxdatawidth);
printf(", max sync rate %dMHz, initiator ID %d\n",
(u_int32_t)le64toh(param.p.sci.maxsyncrate) / 1000,
le32toh(param.p.sci.initiatorid));
#endif
sc->sc_openings = 1;
sc->sc_adapter.adapt_dev = &sc->sc_dv;
sc->sc_adapter.adapt_nchannels = 1;
sc->sc_adapter.adapt_openings = 1;
sc->sc_adapter.adapt_max_periph = 1;
sc->sc_adapter.adapt_ioctl = iopsp_ioctl;
sc->sc_adapter.adapt_minphys = minphys;
sc->sc_adapter.adapt_request = iopsp_scsipi_request;
memset(&sc->sc_channel, 0, sizeof(sc->sc_channel));
sc->sc_channel.chan_adapter = &sc->sc_adapter;
sc->sc_channel.chan_bustype = &scsi_bustype;
sc->sc_channel.chan_channel = 0;
sc->sc_channel.chan_ntargets = fc ?
IOPSP_MAX_FC_TARGET : param.p.sci.maxdatawidth;
sc->sc_channel.chan_nluns = IOPSP_MAX_LUN;
sc->sc_channel.chan_id = le32toh(param.p.sci.initiatorid);
sc->sc_channel.chan_flags = SCSIPI_CHAN_NOSETTLE;
#ifdef I2OVERBOSE
/*
* Allocate the target map. Currently used for informational
* purposes only.
*/
size = sc->sc_channel.chan_ntargets * sizeof(struct iopsp_target);
sc->sc_targetmap = malloc(size, M_DEVBUF, M_NOWAIT|M_ZERO);
#endif
/* Build the two maps, and attach to scsipi. */
if (iopsp_reconfig(self) != 0) {
printf("%s: configure failed\n", sc->sc_dv.dv_xname);
goto bad;
}
config_found(self, &sc->sc_channel, scsiprint);
return;
bad:
iop_initiator_unregister(iop, &sc->sc_ii);
}
/*
* Scan the LCT to determine which devices we control, and enter them into
* the maps.
*/
static int
iopsp_reconfig(struct device *dv)
{
struct iopsp_softc *sc;
struct iop_softc *iop;
struct i2o_lct_entry *le;
struct scsipi_channel *sc_chan;
struct {
struct i2o_param_op_results pr;
struct i2o_param_read_results prr;
struct i2o_param_scsi_device_info sdi;
} __attribute__ ((__packed__)) param;
u_int tid, nent, i, targ, lun, size, s, rv, bptid;
u_short *tidmap;
#ifdef I2OVERBOSE
struct iopsp_target *it;
int syncrate;
#endif
sc = (struct iopsp_softc *)dv;
iop = (struct iop_softc *)sc->sc_dv.dv_parent;
sc_chan = &sc->sc_channel;
/* Anything to do? */
if (iop->sc_chgind == sc->sc_chgind)
return (0);
/*
* Allocate memory for the target/LUN -> TID map. Use zero to
* denote absent targets (zero is the TID of the I2O executive,
* and we never address that here).
*/
size = sc_chan->chan_ntargets * (IOPSP_MAX_LUN) * sizeof(u_short);
if ((tidmap = malloc(size, M_DEVBUF, M_WAITOK|M_ZERO)) == NULL)
return (ENOMEM);
#ifdef I2OVERBOSE
for (i = 0; i < sc_chan->chan_ntargets; i++)
sc->sc_targetmap[i].it_flags &= ~IT_PRESENT;
#endif
/*
* A quick hack to handle Intel's stacked bus port arrangement.
*/
bptid = sc->sc_ii.ii_tid;
nent = iop->sc_nlctent;
for (le = iop->sc_lct->entry; nent != 0; nent--, le++)
if ((le16toh(le->classid) & 4095) ==
I2O_CLASS_BUS_ADAPTER_PORT &&
(le32toh(le->usertid) & 4095) == bptid) {
bptid = le16toh(le->localtid) & 4095;
break;
}
nent = iop->sc_nlctent;
for (i = 0, le = iop->sc_lct->entry; i < nent; i++, le++) {
if ((le16toh(le->classid) & 4095) != I2O_CLASS_SCSI_PERIPHERAL)
continue;
if (((le32toh(le->usertid) >> 12) & 4095) != bptid)
continue;
tid = le16toh(le->localtid) & 4095;
rv = iop_field_get_all(iop, tid, I2O_PARAM_SCSI_DEVICE_INFO,
&param, sizeof(param), NULL);
if (rv != 0)
continue;
targ = le32toh(param.sdi.identifier);
lun = param.sdi.luninfo[1];
#if defined(DIAGNOSTIC) || defined(I2ODEBUG)
if (targ >= sc_chan->chan_ntargets ||
lun >= sc_chan->chan_nluns) {
printf("%s: target %d,%d (tid %d): bad target/LUN\n",
sc->sc_dv.dv_xname, targ, lun, tid);
continue;
}
#endif
#ifdef I2OVERBOSE
/*
* If we've already described this target, and nothing has
* changed, then don't describe it again.
*/
it = &sc->sc_targetmap[targ];
it->it_flags |= IT_PRESENT;
syncrate = ((int)le64toh(param.sdi.negsyncrate) + 500) / 1000;
if (it->it_width != param.sdi.negdatawidth ||
it->it_offset != param.sdi.negoffset ||
it->it_syncrate != syncrate) {
it->it_width = param.sdi.negdatawidth;
it->it_offset = param.sdi.negoffset;
it->it_syncrate = syncrate;
printf("%s: target %d (tid %d): %d-bit, ",
sc->sc_dv.dv_xname, targ, tid, it->it_width);
if (it->it_syncrate == 0)
printf("asynchronous\n");
else
printf("synchronous at %dMHz, offset 0x%x\n",
it->it_syncrate, it->it_offset);
}
#endif
/* Ignore the device if it's in use by somebody else. */
if ((le32toh(le->usertid) & 4095) != I2O_TID_NONE) {
#ifdef I2OVERBOSE
if (sc->sc_tidmap == NULL ||
IOPSP_TIDMAP(sc->sc_tidmap, targ, lun) !=
IOPSP_TID_INUSE)
printf("%s: target %d,%d (tid %d): in use by"
" tid %d\n", sc->sc_dv.dv_xname,
targ, lun, tid,
le32toh(le->usertid) & 4095);
#endif
IOPSP_TIDMAP(tidmap, targ, lun) = IOPSP_TID_INUSE;
} else
IOPSP_TIDMAP(tidmap, targ, lun) = (u_short)tid;
}
#ifdef I2OVERBOSE
for (i = 0; i < sc_chan->chan_ntargets; i++)
if ((sc->sc_targetmap[i].it_flags & IT_PRESENT) == 0)
sc->sc_targetmap[i].it_width = 0;
#endif
/* Swap in the new map and return. */
s = splbio();
if (sc->sc_tidmap != NULL)
free(sc->sc_tidmap, M_DEVBUF);
sc->sc_tidmap = tidmap;
splx(s);
sc->sc_chgind = iop->sc_chgind;
return (0);
}
/*
* Re-scan the bus; to be called from a higher level (e.g. scsipi).
*/
static int
iopsp_rescan(struct iopsp_softc *sc)
{
struct iop_softc *iop;
struct iop_msg *im;
struct i2o_hba_bus_scan mf;
int rv;
iop = (struct iop_softc *)sc->sc_dv.dv_parent;
rv = lockmgr(&iop->sc_conflock, LK_EXCLUSIVE, NULL);
if (rv != 0) {
#ifdef I2ODEBUG
printf("iopsp_rescan: unable to acquire lock\n");
#endif
return (rv);
}
im = iop_msg_alloc(iop, IM_WAIT);
mf.msgflags = I2O_MSGFLAGS(i2o_hba_bus_scan);
mf.msgfunc = I2O_MSGFUNC(sc->sc_ii.ii_tid, I2O_HBA_BUS_SCAN);
mf.msgictx = sc->sc_ii.ii_ictx;
mf.msgtctx = im->im_tctx;
rv = iop_msg_post(iop, im, &mf, 5*60*1000);
iop_msg_free(iop, im);
if (rv != 0)
printf("%s: bus rescan failed (error %d)\n",
sc->sc_dv.dv_xname, rv);
if ((rv = iop_lct_get(iop)) == 0)
rv = iopsp_reconfig(&sc->sc_dv);
lockmgr(&iop->sc_conflock, LK_RELEASE, NULL);
return (rv);
}
/*
* Start a SCSI command.
*/
static void
iopsp_scsipi_request(struct scsipi_channel *chan, scsipi_adapter_req_t req,
void *arg)
{
struct scsipi_xfer *xs;
struct scsipi_periph *periph;
struct iopsp_softc *sc;
struct iop_msg *im;
struct iop_softc *iop;
struct i2o_scsi_scb_exec *mf;
int error, flags, tid;
u_int32_t mb[IOP_MAX_MSG_SIZE / sizeof(u_int32_t)];
sc = (void *)chan->chan_adapter->adapt_dev;
iop = (struct iop_softc *)sc->sc_dv.dv_parent;
switch (req) {
case ADAPTER_REQ_RUN_XFER:
xs = arg;
periph = xs->xs_periph;
flags = xs->xs_control;
SC_DEBUG(periph, SCSIPI_DB2, ("iopsp_scsi_request run_xfer\n"));
tid = IOPSP_TIDMAP(sc->sc_tidmap, periph->periph_target,
periph->periph_lun);
if (tid == IOPSP_TID_ABSENT || tid == IOPSP_TID_INUSE) {
xs->error = XS_SELTIMEOUT;
scsipi_done(xs);
return;
}
/* Need to reset the target? */
if ((flags & XS_CTL_RESET) != 0) {
if (iop_simple_cmd(iop, tid, I2O_SCSI_DEVICE_RESET,
sc->sc_ii.ii_ictx, 1, 30*1000) != 0) {
#ifdef I2ODEBUG
printf("%s: reset failed\n",
sc->sc_dv.dv_xname);
#endif
xs->error = XS_DRIVER_STUFFUP;
} else
xs->error = XS_NOERROR;
scsipi_done(xs);
return;
}
#if defined(I2ODEBUG) || defined(SCSIDEBUG)
if (xs->cmdlen > sizeof(mf->cdb))
panic("%s: CDB too large", sc->sc_dv.dv_xname);
#endif
im = iop_msg_alloc(iop, IM_POLL_INTR |
IM_NOSTATUS | ((flags & XS_CTL_POLL) != 0 ? IM_POLL : 0));
im->im_dvcontext = xs;
mf = (struct i2o_scsi_scb_exec *)mb;
mf->msgflags = I2O_MSGFLAGS(i2o_scsi_scb_exec);
mf->msgfunc = I2O_MSGFUNC(tid, I2O_SCSI_SCB_EXEC);
mf->msgictx = sc->sc_ii.ii_ictx;
mf->msgtctx = im->im_tctx;
mf->flags = xs->cmdlen | I2O_SCB_FLAG_ENABLE_DISCONNECT |
I2O_SCB_FLAG_SENSE_DATA_IN_MESSAGE;
mf->datalen = xs->datalen;
memcpy(mf->cdb, xs->cmd, xs->cmdlen);
switch (xs->xs_tag_type) {
case MSG_ORDERED_Q_TAG:
mf->flags |= I2O_SCB_FLAG_ORDERED_QUEUE_TAG;
break;
case MSG_SIMPLE_Q_TAG:
mf->flags |= I2O_SCB_FLAG_SIMPLE_QUEUE_TAG;
break;
case MSG_HEAD_OF_Q_TAG:
mf->flags |= I2O_SCB_FLAG_HEAD_QUEUE_TAG;
break;
default:
break;
}
if (xs->datalen != 0) {
error = iop_msg_map_bio(iop, im, mb, xs->data,
xs->datalen, (flags & XS_CTL_DATA_OUT) == 0);
if (error) {
xs->error = XS_DRIVER_STUFFUP;
iop_msg_free(iop, im);
scsipi_done(xs);
return;
}
if ((flags & XS_CTL_DATA_IN) == 0)
mf->flags |= I2O_SCB_FLAG_XFER_TO_DEVICE;
else
mf->flags |= I2O_SCB_FLAG_XFER_FROM_DEVICE;
}
if (iop_msg_post(iop, im, mb, xs->timeout)) {
if (xs->datalen != 0)
iop_msg_unmap(iop, im);
iop_msg_free(iop, im);
xs->error = XS_DRIVER_STUFFUP;
scsipi_done(xs);
}
break;
case ADAPTER_REQ_GROW_RESOURCES:
/*
* Not supported.
*/
break;
case ADAPTER_REQ_SET_XFER_MODE:
/*
* The DDM takes care of this, and we can't modify its
* behaviour.
*/
break;
}
}
#ifdef notyet
/*
* Abort the specified I2O_SCSI_SCB_EXEC message and its associated SCB.
*/
static int
iopsp_scsi_abort(struct iopsp_softc *sc, int atid, struct iop_msg *aim)
{
struct iop_msg *im;
struct i2o_scsi_scb_abort mf;
struct iop_softc *iop;
int rv, s;
iop = (struct iop_softc *)sc->sc_dv.dv_parent;
im = iop_msg_alloc(iop, IM_POLL);
mf.msgflags = I2O_MSGFLAGS(i2o_scsi_scb_abort);
mf.msgfunc = I2O_MSGFUNC(atid, I2O_SCSI_SCB_ABORT);
mf.msgictx = sc->sc_ii.ii_ictx;
mf.msgtctx = im->im_tctx;
mf.tctxabort = aim->im_tctx;
s = splbio();
rv = iop_msg_post(iop, im, &mf, 30000);
splx(s);
iop_msg_free(iop, im);
return (rv);
}
#endif
/*
* We have a message which has been processed and replied to by the IOP -
* deal with it.
*/
static void
iopsp_intr(struct device *dv, struct iop_msg *im, void *reply)
{
struct scsipi_xfer *xs;
struct iopsp_softc *sc;
struct i2o_scsi_reply *rb;
struct iop_softc *iop;
u_int sl;
sc = (struct iopsp_softc *)dv;
xs = (struct scsipi_xfer *)im->im_dvcontext;
iop = (struct iop_softc *)dv->dv_parent;
rb = reply;
SC_DEBUG(xs->xs_periph, SCSIPI_DB2, ("iopsp_intr\n"));
if ((rb->msgflags & I2O_MSGFLAGS_FAIL) != 0) {
xs->error = XS_DRIVER_STUFFUP;
xs->resid = xs->datalen;
} else {
if (rb->hbastatus != I2O_SCSI_DSC_SUCCESS) {
switch (rb->hbastatus) {
case I2O_SCSI_DSC_ADAPTER_BUSY:
case I2O_SCSI_DSC_SCSI_BUS_RESET:
case I2O_SCSI_DSC_BUS_BUSY:
xs->error = XS_BUSY;
break;
case I2O_SCSI_DSC_SELECTION_TIMEOUT:
xs->error = XS_SELTIMEOUT;
break;
case I2O_SCSI_DSC_COMMAND_TIMEOUT:
case I2O_SCSI_DSC_DEVICE_NOT_PRESENT:
case I2O_SCSI_DSC_LUN_INVALID:
case I2O_SCSI_DSC_SCSI_TID_INVALID:
xs->error = XS_TIMEOUT;
break;
default:
xs->error = XS_DRIVER_STUFFUP;
break;
}
printf("%s: HBA status 0x%02x\n", sc->sc_dv.dv_xname,
rb->hbastatus);
} else if (rb->scsistatus != SCSI_OK) {
switch (rb->scsistatus) {
case SCSI_CHECK:
xs->error = XS_SENSE;
sl = le32toh(rb->senselen);
if (sl > sizeof(xs->sense.scsi_sense))
sl = sizeof(xs->sense.scsi_sense);
memcpy(&xs->sense.scsi_sense, rb->sense, sl);
break;
case SCSI_QUEUE_FULL:
case SCSI_BUSY:
xs->error = XS_BUSY;
break;
default:
xs->error = XS_DRIVER_STUFFUP;
break;
}
} else
xs->error = XS_NOERROR;
xs->resid = xs->datalen - le32toh(rb->datalen);
xs->status = rb->scsistatus;
}
/* Free the message wrapper and pass the news to scsipi. */
if (xs->datalen != 0)
iop_msg_unmap(iop, im);
iop_msg_free(iop, im);
scsipi_done(xs);
}
/*
* ioctl hook; used here only to initiate low-level rescans.
*/
static int
iopsp_ioctl(struct scsipi_channel *chan, u_long cmd, caddr_t data, int flag,
struct proc *p)
{
int rv;
switch (cmd) {
case SCBUSIOLLSCAN:
/*
* If it's boot time, the bus will have been scanned and the
* maps built. Locking would stop re-configuration, but we
* want to fake success.
*/
if (p != &proc0)
rv = iopsp_rescan(
(struct iopsp_softc *)chan->chan_adapter->adapt_dev);
else
rv = 0;
break;
default:
rv = ENOTTY;
break;
}
return (rv);
}
/*
* The number of openings available to us has changed, so inform scsipi.
*/
static void
iopsp_adjqparam(struct device *dv, int mpi)
{
struct iopsp_softc *sc;
int s;
sc = (struct iopsp_softc *)dv;
s = splbio();
sc->sc_adapter.adapt_openings += mpi - sc->sc_openings;
sc->sc_openings = mpi;
splx(s);
}
Reference in New Issue View Git Blame Copy Permalink